summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2013-02-22i2c: pxa: remove incorrect __exit annotationsDmitry Torokhov1-2/+2
The remove() methods should not be marked __exit unless we are using platform_driver_probe() which disables unbinding device from driver via sysfs. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-21i2c: ocores: Fix pointer to integer cast warningJayachandran C1-1/+1
After commit a000b8c1 [i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg function], compiling i2c-ocores.c for 64-bit gives the following warning: drivers/i2c/busses/i2c-ocores.c: In function 'ocores_i2c_of_probe': drivers/i2c/busses/i2c-ocores.c:334:15: warning: cast from pointer to integer of different size Fix it by casting the pointer to long. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-02-16i2c: tegra: remove warning dump if timeout happen in transferLaxman Dewangan1-1/+1
If timeout error occurs in the i2c transfer then it was dumping warning of call stack. Remove the warning dump as there is may be possibility that some slave devices are busy and not responding the i2c communication. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-15i2c: fix i2c-ismt.c printk format warningRandy Dunlap1-1/+1
Fix printk format warning. dma_addr_t can be 32-bit or 64-bit, so cast it to long long for printing. This also matches the printk format specifier that is already used. drivers/i2c/busses/i2c-ismt.c:532:3: warning: format '%llX' expects argument of type 'long long unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-15i2c: i801: Add Device IDs for Intel Wellsburg PCHJames Ralston2-0/+16
This patch adds the SMBus Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-12i2c: add bcm2835 driverStephen Warren3-0/+355
This implements a very basic I2C host driver for the BCM2835 SoC. Missing features so far are: * 10-bit addressing. * DMA. Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: sis630: checkpatch cleanupAmaury Decrême1-105/+109
This patch corrects checkpatch errors. The changes has also been removed as it has less meaning with version control tools. Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: sis630: display unsigned hexAmaury Decrême1-1/+1
This patch corrects the display of the acpi_base unsigned hex value. Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: sis630: use hex to constants for SMBus commandsAmaury Decrême1-14/+31
This patch replaces hexadecimal values by constants for SMBus commands. Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: sis630: fix behavior after collisionAmaury Decrême1-6/+1
Datasheet on collision: SMBus Collision (SMBCOL_STS) This bit is set when a SMBus Collision condition occurs and SMBus Host loses in the bus arbitration. The software should clear this bit and re-start SMBus operation. As the status will be cleared in transaction_end, we can remove the sis630_write and prepare to return -EAGAIN to retry. Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: sis630: clear sticky bitsAmaury Decrême1-3/+1
The sticky bits must be cleared at the end of the transaction by writing a 1 to all fields. Datasheet: SMBus Status (SMB_STS) The following registers are all sticky bits and only can be cleared by writing a one to their corresponding fields. Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: sis630: Add SIS964 supportAmaury Decrême2-32/+60
Signed-off-by: Amaury Decrême <amaury.decreme@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-11i2c: isch: Add module parameter for backbone clock rate if divider is unsetAlexander Stein1-0/+17
It was observed the Host Clock Divider was not written by the driver. It was still set to (default) 0, if not already set by BIOS, which caused garbage on SMBus. This driver adds a parameters which is used to calculate the divider appropriately for a default bitrate of 100 KHz. This new divider is only applied if the clock divider is still default 0. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: at91: fix unsed variable warning when building with !CONFIG_OFJoachim Eastwood1-7/+7
Commit 70d46a2 "i2c: at91: add dt support to i2c-at91" added DT only support for at91sam9x5. Building i2c-at91 without CONFIG_OF now warns about at91sam9x5_config as being unused. drivers/i2c/busses/i2c-at91.c:556:30: warning: 'at91sam9x5_config' defined but not used [-Wunused-variable] Move at91sam9x5_config under the defined(CONFIG_OF) guard as new AT91 SoCs will be DT only. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: Adding support for Intel iSMT SMBus 2.0 host controllerNeil Horman3-0/+974
The iSMT (Intel SMBus Message Transport) supports multi-master I2C/SMBus, as well as IPMI. It's operation is DMA-based and utilizes descriptors to initiate transactions on the bus. The iSMT hardware can act as both a master and a target, although this driver only supports being a master. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bill Brown <bill.e.brown@intel.com> Tested-by: Seth Heasley <seth.heasley@intel.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: sh_mobile: don't send a stop condition by default inside transfersGuennadi Liakhovetski1-20/+59
By default there should be no stop bit on I2C between single messages within transfers. Fix the driver to comply and only send a stop bit at the end of transfers or if I2C_M_STOP is set. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: sh_mobile: eliminate an open-coded "goto" loopGuennadi Liakhovetski1-26/+34
Eliminate an open-coded "goto" loop by introducing a function. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: sh_mobile: fix timeout error handlingGuennadi Liakhovetski1-1/+4
In a timeout case return an error immediately from the driver's .master_xfer() method, instead of continuing and letting higher layers fail. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: sh_mobile: cosmetic: trivially simplify 2 functionsGuennadi Liakhovetski1-10/+4
Reduce 2 boolean functions from "if (condition) return 1; return 0;" to "return condition;" Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-10i2c: mxs: Implement arbitrary clock speed derivation algorithmMarek Vasut1-39/+55
This patch drops the i2c timing tables from this driver and instead derives the timing based from the requested clock sleep. The timing tables were completely wrong anyway when observed on a scope. This new algorithm is also only derived by using a scope, but it seems to produce much more accurate result. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> [wsa: changed messages from dev_err to dev_warn] Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-02-08i2c: i801: SMBus patch for Intel Avoton DeviceIDsSeth Heasley2-0/+4
This patch adds the PCU SMBus DeviceID for the Intel Avoton SOC. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: s3c2410: Add quirk to exclude GPIO config for exynos5440Giridhar Maruthy1-0/+2
Signed-off-by: Giridhar Maruthy <giridhar.m@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: mxs: Add PIO and mixed-DMA supportMarek Vasut1-13/+163
Add support for the PIO mode and mixed PIO/DMA mode support. The mixed PIO/DMA is the default mode of operation. This shall leverage overhead that the driver creates due to setting up DMA descriptors even for very short transfers. The current boundary between PIO/DMA 8 bytes, transfers shorter than 8 bytes are transfered by PIO, longer transfers use DMA. The performance of write transfers remains unchanged, while there is a minor improvement of read performance. Reading 16KB EEPROM with DMA-only operations gives a read speed of 39.5KB/s, while with then new mixed-mode the speed is blazing 40.6KB/s. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: s3c2410: Remove err_cpufreq labelTushar Behera1-5/+2
err_cpufreq label is now used only once. It can be removed and related code can be moved to the caller location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: s3c2410: Move location of clk_prepare_enable() call in probe functionTushar Behera1-17/+12
In i2c-s3c2410 driver probe, only s3c24xx_i2c_init() needs the I2C clock to be enabled. Moving clk_prepare_enable() and clk_disable_unprepare() calls to around this function simplifies the return path of probe call. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: s3c2410: Convert to use devm_* APIsTushar Behera1-11/+5
i2c-s3c2410 driver is modified to use devm_clk_get() and devm_request_irq(). This also simplifies the return path in driver's probe. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: s3c2410: Remove unnecessary label err_noclkTushar Behera1-6/+3
err_noclk label redirects to a simple return statement. Move the return statement to the caller location and remove the label. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: nomadik: drop superfluous variable initializationWolfram Sang1-6/+3
cppcheck rightfully reports those as "reassigned a value before the old one has been used." Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com>
2013-01-28i2c: nomadik: adopt pinctrl supportPatrice Chotard1-0/+89
Amend the I2C nomadik pin controller to optionally take a pin control handle and set the state of the pins to: - "default" on boot, resume and before performing an i2c transfer - "idle" after initial default, after resume default, and after each i2c xfer - "sleep" on suspend() This should make it possible to optimize energy usage for the pins both for the suspend/resume cycle, and for runtime cases inbetween I2C transfers. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [wsa: fixed braces on one else-branch] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: at91: add of_device_id entry for at91rm9200Joachim Eastwood1-0/+3
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Ludovic Ddesroches <ludovic.desroches@atmel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: tegra: add support for Tegra114 SoCLaxman Dewangan1-14/+63
NVIDIA's Tegra114 has following enhanced feature in i2c controller: - Enable/disable control for per packet transfer complete interrupt. Earlier SoCs could not disable this. - Single clock source for standard/fast and HS mode clock speed. The clock divisor for fast/standard mode is added into the i2c controller to meet the HS and standard/fast mode of clock speed from single source. Add support for the above feature to make it functional on T114 SOCs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c-designware: add support for Intel LynxpointMika Westerberg1-3/+46
Intel Lynxpoint has two I2C controllers. These controllers are enumerated from ACPI namespace with IDs INT33C2 and INT33C3. Add support for these to the I2C DesignWare platform driver. This is based on the work of Dirk Brandewie. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c-designware: add minimal support for runtime PMMika Westerberg1-0/+10
In order to save power the device should be put to low power states whenever it is not being used. We implement this by enabling minimal runtime PM support. There isn't much to do for the device itself as it is disabled once the last transfer is completed but subsystem/domain runtime PM hooks can save more power by power gating the device etc. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c-designware: always set the STOP bit after last byteMika Westerberg1-2/+14
If IC_EMPTYFIFO_HOLD_MASTER_EN is set to one, the DesignWare I2C controller doesn't generate STOP on the bus when the FIFO is empty. This violates the rules of Linux I2C stack as it requires that the STOP is issued once the i2c_transfer() is finished. However, there is no way to detect this from the hardware registers, so we must make sure that the STOP bit is always set once the last byte of the last message is transferred. This patch is based on the work of Dirk Brandewie. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: nforce2: fix coding style issuesLaurent Navet1-76/+76
avoid these checkpatch.pl issues : - ERROR: "foo * bar" should be "foo *bar" - ERROR: switch and case should be at the same indent - ERROR: "(foo*)" should be "(foo *)" - ERROR: do not use assignment in if condition - ERROR: space required before the open parenthesis '(' - WARNING: suspect code indent for conditional statements - WARNING: quoted string split across lines - WARNING: space prohibited between function name and open parenthesis '(' - WARNING: line over 80 characters also add spaces around some "+", "=", "*" Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-28i2c: core: Remove definition of i2c_smbus_process_callTushar Behera1-23/+0
i2c_smbus_process_call has no users in the kernel, so this can be removed. Documentation for the same has been updated accordingly. Fixes following sparse warning. drivers/i2c/i2c-core.c:1871:5: warning: symbol 'i2c_smbus_process_call' was not declared. Should it be static? [wsa: updated the documentation] Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c-designware: add missing MODULE_LICENSEMika Westerberg1-0/+4
The driver can also be built as a module so add MODULE_LICENSE for it. In addition add MODULE_DESCRIPTION as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: omap: fix draining irq handlingAaro Koskinen1-2/+2
Commit 0bdfe0cb803dce699ff337c35d8e97ac355fa417 (i2c: omap: sanitize exit path) changed the interrupt handler to exit early and complete the transfer after the draining IRQ is handled. As a result, the ARDY may not be cleared properly, and it may cause all future I2C transfers to timeout with "timeout waiting for bus ready". This is reproducible at least with N900 when twl4030_gpio makes a long write (> FIFO size) during the probe (http://marc.info/?l=linux-omap&m=135818882610432&w=2). The fix is to continue until we get ARDY interrupt that completes the transfer. Tested with 3.8-rc4 + N900: 20 boots in a row without errors; without the patch the problem triggers after few reboots. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: omap: errata i462: fix incorrect ack for arbitration lost interruptAaro Koskinen1-1/+1
The errata handling function acks wrong interrupt in case of "Arbitration lost". Fix it. Discovered during code review, the real impact of the bug is unknown. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: muxes: fix wrong use of sizeof(ptr)Laurent Navet1-1/+1
sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: sirf: register i2c_client from dt child-nodes in probe entryBarry Song1-0/+4
in probe() entry of i2c_driver, set the of node of adapter and call of_i2c_register_devices to register all i2c_client from dt child-nodes Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: mxs: Fix type of error codeFabio Estevam1-1/+1
cmd_err is used to handle error code, so it should not be unsigned. This fixes the following warning when building with W=1 option: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:331:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org
2013-01-21i2c: mxs: Fix misuse init_completionMarek Vasut1-1/+3
The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-12-22i2c: remove __dev* attributes from subsystemBill Pemberton54-247/+241
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-12-19Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds13-337/+1236
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
2012-12-17Merge tag 'mfd-3.8-1' of ↵Linus Torvalds3-0/+491
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-17i2c-piix4: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches1-3/+2
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-17i2c-i801: Enable interrupts for all post-ICH5 chipsJean Delvare1-10/+1
I did not receive a single bug report after interrupt support was added for a limited number of chips. So I'd say the code is good and should be enabled for all supported chips, that is: ICH5 and later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2012-12-17i2c-i801: Add device tree supportThierry Reding1-0/+2
Add support for probing slave devices parsed from the device tree. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-14Merge branch 'for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-17 12:34:56 +0300