summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2023-06-14i2c: sprd: Delete i2c adapter in .remove's error pathUwe Kleine-König1-3/+5
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error pathLars-Peter Clausen1-2/+4
[ Upstream commit ae1664f04f504a998737f5bb563f16b44357bcca ] The cdns_i2c_master_xfer() function gets a runtime PM reference when the function is entered. This reference is released when the function is exited. There is currently one error path where the function exits directly, which leads to a leak of the runtime PM reference. Make sure that this error path also releases the runtime PM reference. Fixes: 1a351b10b967 ("i2c: cadence: Added slave support") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17i2c: omap: Fix standard mode false ACK readingsReid Tonking1-1/+1
commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream. Using standard mode, rare false ACK responses were appearing with i2cdetect tool. This was happening due to NACK interrupt triggering ISR thread before register access interrupt was ready. Removing the NACK interrupt's ability to trigger ISR thread lets register access ready interrupt do this instead. Cc: <stable@vger.kernel.org> # v3.7+ Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support") Signed-off-by: Reid Tonking <reidt@ti.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20i2c: ocores: generate stop condition after timeout in polling modeGregor Herburger1-16/+19
[ Upstream commit f8160d3b35fc94491bb0cb974dbda310ef96c0e2 ] In polling mode, no stop condition is generated after a timeout. This causes SCL to remain low and thereby block the bus. If this happens during a transfer it can cause slaves to misinterpret the subsequent transfer and return wrong values. To solve this, pass the ETIMEDOUT error up from ocores_process_polling() instead of setting STATE_ERROR directly. The caller is adjusted to call ocores_process_timeout() on error both in polling and in IRQ mode, which will set STATE_ERROR and generate a stop condition. Fixes: 69c8c0c0efa8 ("i2c: ocores: add polling interface") Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Federico Vaga <federico.vaga@cern.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20i2c: imx-lpi2c: clean rx/tx buffers upon new messageAlexander Stein1-0/+2
[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ] When start sending a new message clear the Rx & Tx buffer pointers in order to avoid using stale pointers. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()Wei Chen1-0/+3
commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream. The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr. Fix this bug by checking the value of writelen. Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen <harperchen1110@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05i2c: imx-lpi2c: check only for enabled interrupt flagsAlexander Stein1-0/+4
[ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ] When reading from I2C, the Tx watermark is set to 0. Unfortunately the TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less than watermark. So it is set in every case, hence the reset default of 1. This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying to send Tx data on a read message. Mask the IRQ status to filter for wanted flags only. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-15i2c: rk3x: fix a bunch of kernel-doc warningsRandy Dunlap1-22/+22
[ Upstream commit 0582d984793d30442da88fe458674502bad1ad29 ] Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c: drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line: * struct i2c_spec_values: drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line: * struct rk3x_i2c_calced_timings: drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line: * struct rk3x_i2c_soc_data: drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a START condition, which triggers a REG_INT_START interrupt. drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Get timing values of I2C specification drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate divider values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate timing values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Setup I2C registers for an I2C operation specified by msgs, num. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-15i2c: mxs: suppress probe-deferral error messageStefan Wahren1-2/+2
[ Upstream commit 78a4471fa1a76a8bef4919105de67660a89a1e9b ] During boot of I2SE Duckbill the kernel log contains a confusing error: Failed to request dma This is caused by i2c-mxs tries to request a not yet available DMA channel (-EPROBE_DEFER). So suppress this message by using dev_err_probe(). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01i2c: designware: use casting of u64 in clock multiplication to avoid overflowLareine Khawaly1-3/+6
[ Upstream commit c8c37bc514514999e62a17e95160ed9ebf75ca8d ] In functions i2c_dw_scl_lcnt() and i2c_dw_scl_hcnt() may have overflow by depending on the values of the given parameters including the ic_clk. For example in our use case where ic_clk is larger than one million, multiplication of ic_clk * 4700 will result in 32 bit overflow. Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide. Fixes: 2373f6b9744d ("i2c-designware: split of i2c-designware.c into core and bus specific parts") Signed-off-by: Lareine Khawaly <lareine@amazon.com> Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01i2c: designware: Use DIV_ROUND_CLOSEST() macroAndy Shevchenko2-6/+7
[ Upstream commit c045214a0f31dd5d6be716ed2f119b57b6c5d3a2 ] Instead of open-coding DIV_ROUND_CLOSEST() and similar use the macros directly. While at it, replace numbers with predefined SI metric prefixes. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Stable-dep-of: c8c37bc51451 ("i2c: designware: use casting of u64 in clock multiplication to avoid overflow") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14i2c: ismt: Fix an out-of-bounds bug in ismt_access()Zheyu Ma1-0/+3
[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ] When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug. The following log can reveal it: [ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20 [ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE [ 33.996475] ================================================================== [ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b [ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485 [ 33.999450] Call Trace: [ 34.001849] memcpy+0x20/0x60 [ 34.002077] ismt_access.cold+0x374/0x214b [ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0 [ 34.004007] i2c_smbus_xfer+0x10a/0x390 [ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710 [ 34.005196] i2cdev_ioctl+0x5ec/0x74c Fix this bug by checking the size of 'data->block[0]' first. Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14i2c: mux: reg: check return value after calling platform_get_resource()Yang Yingliang1-3/+2
[ Upstream commit 2d47b79d2bd39cc6369eccf94a06568d84c906ae ] It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probeHui Tang1-7/+3
[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ] Using pcim_enable_device() to avoid missing pci_disable_device(). Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag setAndrew Lunn1-2/+4
[ Upstream commit d36678f7905cbd1dc55a8a96e066dafd749d4600 ] Recent changes to the DMA code has resulting in the IMX driver failing I2C transfers when the buffer has been vmalloc. Only perform DMA transfers if the message has the I2C_M_DMA_SAFE flag set, indicating the client is providing a buffer which is DMA safe. This is a minimal fix for stable. The I2C core provides helpers to allocate a bounce buffer. For a fuller fix the master should make use of these helpers. Fixes: 4544b9f25e70 ("dma-mapping: Add vmap checks to dma_map_single()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08i2c: npcm7xx: Fix error handling in npcm_i2c_init()Yuan Can1-1/+10
[ Upstream commit 145900cf91c4b32ac05dbc8675a0c7f4a278749d ] A problem about i2c-npcm7xx create debugfs failed is triggered with the following log given: [ 173.827310] debugfs: Directory 'npcm_i2c' with parent '/' already present! The reason is that npcm_i2c_init() returns platform_driver_register() directly without checking its return value, if platform_driver_register() failed, it returns without destroy the newly created debugfs, resulting the debugfs of npcm_i2c can never be created later. npcm_i2c_init() debugfs_create_dir() # create debugfs directory platform_driver_register() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when platform_driver_register() returns error. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Tali Perry <tali.perry@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25i2c: i801: add lis3lv02d's I2C address for Vostro 5568Nam Cao1-0/+1
[ Upstream commit d6643d7207c572c1b0305ed505101f15502c6c87 ] Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known to the kernel. Add this address. Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro 5568 laptop: - Horizontal: (-18,0,1044) - Front elevated: (522,-18,1080) - Left elevated: (-18,-360,1080) - Upside down: (36,108,-1134) Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25i2c: tegra: Allocate DMA memory for DMA engineThierry Reding1-6/+10
[ Upstream commit cdbf26251d3b35c4ccaea0c3a6de4318f727d3d2 ] When the I2C controllers are running in DMA mode, it is the DMA engine that performs the memory accesses rather than the I2C controller. Pass the DMA engine's struct device pointer to the DMA API to make sure the correct DMA operations are used. This fixes an issue where the DMA engine's SMMU stream ID needs to be misleadingly set for the I2C controllers in device tree. Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10i2c: piix4: Fix adapter not be removed in piix4_remove()Chen Zhongjin1-0/+1
[ Upstream commit 569bea74c94d37785682b11bab76f557520477cd ] In piix4_probe(), the piix4 adapter will be registered in: piix4_probe() piix4_add_adapters_sb800() / piix4_add_adapter() i2c_add_adapter() Based on the probed device type, piix4_add_adapters_sb800() or single piix4_add_adapter() will be called. For the former case, piix4_adapter_count is set as the number of adapters, while for antoher case it is not set and kept default *zero*. When piix4 is removed, piix4_remove() removes the adapters added in piix4_probe(), basing on the piix4_adapter_count value. Because the count is zero for the single adapter case, the adapter won't be removed and makes the sources allocated for adapter leaked, such as the i2c client and device. These sources can still be accessed by i2c or bus and cause problems. An easily reproduced case is that if a new adapter is registered, i2c will get the leaked adapter and try to call smbus_algorithm, which was already freed: Triggered by: rmmod i2c_piix4 && modprobe max31730 BUG: unable to handle page fault for address: ffffffffc053d860 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3752 Comm: modprobe Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core RSP: 0018:ffff888107477710 EFLAGS: 00000246 ... <TASK> i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core __process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core bus_for_each_dev (drivers/base/bus.c:301) i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... </TASK> ---[ end trace 0000000000000000 ]--- Fix this problem by correctly set piix4_adapter_count as 1 for the single adapter so it can be normally removed. Fixes: 528d53a1592b ("i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10i2c: xiic: Add platform module aliasMartin Tůma1-0/+1
[ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ] The missing "platform" alias is required for the mgb4 v4l2 driver to load the i2c controller driver when probing the HW. Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-30i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapterBryan O'Donoghue1-5/+8
commit 61775d54d674ff8ec3658495e0dbc537227dc5c1 upstream. When we compile-in the CCI along with the imx412 driver and run on the RB5 we see that i2c_add_adapter() causes the probe of the imx412 driver to happen. This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has not completed to pm_runtime_enable(dev). Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding the i2c adapter. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26i2c: mlxbf: support lock mechanismAsmaa Mnebhi1-5/+39
[ Upstream commit 86067ccfa1424a26491542d6f6d7546d40b61a10 ] Linux is not the only entity using the BlueField I2C busses so support a lock mechanism provided by hardware to avoid issues when multiple entities are trying to access the same bus. The lock is acquired whenever written explicitely or the lock register is read. So make sure it is always released at the end of a successful or failed transaction. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i2c: mlxbf: Fix frequency calculationAsmaa Mnebhi1-40/+23
[ Upstream commit 37f071ec327b04c83d47637c5e5c2199b39899ca ] The i2c-mlxbf.c driver is currently broken because there is a bug in the calculation of the frequency. core_f, core_r and core_od are components read from hardware registers and are used to compute the frequency used to compute different timing parameters. The shifting mechanism used to get core_f, core_r and core_od is wrong. Use FIELD_GET to mask and shift the bitfields properly. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()Asmaa Mnebhi1-0/+3
[ Upstream commit de24aceb07d426b6f1c59f33889d6a964770547b ] memcpy() is called in a loop while 'operation->length' upper bound is not checked and 'data_idx' also increments. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i2c: mlxbf: incorrect base address passed during io writeAsmaa Mnebhi1-1/+1
[ Upstream commit 2a5be6d1340c0fefcee8a6489cff7fd88a0d5b85 ] Correct the base address used during io write. This bug had no impact over the overall functionality of the read and write transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18) instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout register which just sets the timeout value before a read/write aborts. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i2c: imx: If pm_runtime_get_sync() returned 1 device access is possibleUwe Kleine-König1-1/+1
[ Upstream commit 085aacaa73163f4b8a89dec24ecb32cfacd34017 ] pm_runtime_get_sync() returning 1 also means the device is powered. So resetting the chip registers in .remove() is possible and should be done. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: d98bdd3a5b50 ("i2c: imx: Make sure to unregister adapter on remove()") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25i2c: imx: Make sure to unregister adapter on remove()Uwe Kleine-König1-9/+11
commit d98bdd3a5b50446d8e010be5b04ce81c4eabf728 upstream. If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is exited early, the i2c adapter stays around and the irq still calls its handler, while the driver data and the register mapping go away. So if later the i2c adapter is accessed or the irq triggers this results in havoc accessing freed memory and unmapped registers. So unregister the software resources even if resume failed, and only skip the hardware access in that case. Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-21i2c: mux-gpmux: Add of_node_put() when breaking out of loopLiang He1-0/+1
[ Upstream commit 6435319c34704994e19b0767f6a4e6f37439867b ] In i2c_mux_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which will automatically increase and decrease the refcount. Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21i2c: cadence: Support PEC for SMBus block readLars-Peter Clausen1-1/+9
[ Upstream commit 9fdf6d97f03035ad5298e2d1635036c74c2090ed ] SMBus packet error checking (PEC) is implemented by appending one additional byte of checksum data at the end of the message. This provides additional protection and allows to detect data corruption on the I2C bus. SMBus block reads support variable length reads. The first byte in the read message is the number of available data bytes. The combination of PEC and block read is currently not supported by the Cadence I2C driver. * When PEC is enabled the maximum transfer length for block reads increases from 33 to 34 bytes. * The I2C core smbus emulation layer relies on the driver updating the `i2c_msg` `len` field with the number of received bytes. The updated length is used when checking the PEC. Add support to the Cadence I2C driver for handling SMBus block reads with PEC. To determine the maximum transfer length uses the initial `len` value of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled it will be 1. Once a read transfer is done also increment the `len` field by the amount of received data bytes. This change has been tested with a UCM90320 PMBus power monitor, which requires block reads to access certain data fields, but also has PEC enabled by default. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21i2c: Fix a potential use after freeXu Wang1-1/+2
[ Upstream commit e4c72c06c367758a14f227c847f9d623f1994ecf ] Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. Fixes: 611e12ea0f12 ("i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter") Signed-off-by: Xu Wang <vulab@iscas.ac.cn> [wsa: added comment to the code, added Fixes tag] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21i2c: npcm: Correct slave role behaviorTali Perry1-3/+6
[ Upstream commit d7aa1b149b8fc04d802879cf4662010aa4a42deb ] Correct the slave transaction logic to be compatible with the generic slave backend driver. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21i2c: npcm: Remove own slave addresses 2:10Tali Perry1-25/+16
[ Upstream commit 47d506d1a28fd10a9fb1f33df5622d88fae72095 ] NPCM can support up to 10 own slave addresses. In practice, only one address is actually being used. In order to access addresses 2 and above, need to switch register banks. The switch needs spinlock. To avoid using spinlock for this useless feature removed support of SA >= 2. Also fix returned slave event enum. Remove some comment since the bank selection is not required. The bank selection is not required since the supported slave addresses are reduced. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29i2c: cadence: Change large transfer count reset logic to be unconditionalRobert Hancock1-25/+5
[ Upstream commit 4ca8ca873d454635c20d508261bfc0081af75cf8 ] Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12i2c: cadence: Unregister the clk notifier in error pathSatish Nagireddy1-0/+1
[ Upstream commit 3501f0c663063513ad604fb1b3f06af637d3396d ] This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22i2c: designware: Use standard optional ref clock implementationSerge Semin2-5/+11
[ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ] Even though the DW I2C controller reference clock source is requested by the method devm_clk_get() with non-optional clock requirement the way the clock handler is used afterwards has a pure optional clock semantic (though in some circumstances we can get a warning about the clock missing printed in the system console). There is no point in reimplementing that functionality seeing the kernel clock framework already supports the optional interface from scratch. Thus let's convert the platform driver to using it. Note by providing this commit we get to fix two problems. The first one was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock"). It causes not having the interface clock (pclk) enabled/disabled in case if the reference clock isn't provided. The second problem was first introduced in commit b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided"). Since that modification the deferred probe procedure has been unsupported in case if the interface clock isn't ready. Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22i2c: npcm7xx: Add check for platform_driver_registerJiasheng Jiang1-2/+1
[ Upstream commit 6ba12b56b9b844b83ed54fb7ed59fb0eb41e4045 ] As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14i2c: cadence: Increase timeout per message if necessaryLucas Tanure1-2/+10
[ Upstream commit 96789dce043f5bff8b7d62aa28d52a7c59403a84 ] Timeout as 1 second sets an upper limit on the length of the transfer executed, but there is no maximum length of a write or read message set in i2c_adapter_quirks for this controller. This upper limit affects devices that require sending large firmware blobs over I2C. To remove that limitation, calculate the minimal time necessary, plus some wiggle room, for every message and use it instead of the default one second, if more than one second. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09i2c: rcar: fix PM ref counts in probe error pathsKuninori Morimoto1-6/+9
[ Upstream commit 3fe2ec59db1a7569e18594b9c0cf1f4f1afd498e ] We have to take care of ID_P_PM_BLOCKED when bailing out during probe. Fixes: 7ee24eb508d6 ("i2c: rcar: disable PM in multi-master mode") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09i2c: npcm: Handle spurious interruptsTali Perry1-29/+62
[ Upstream commit e5222d408de2a88e6b206c38217b48d092184553 ] On some platforms in rare cases (1 to 100,000 transactions), the i2c gets a spurious interrupt which means that we enter an interrupt but in the interrupt handler we don't find any status bit that points to the reason we got this interrupt. This may be a case of a rare HW issue or signal integrity issue that is still under investigation. In order to overcome this we are doing the following: 1. Disable incoming interrupts in master mode only when slave mode is not enabled. 2. Clear end of busy (EOB) after every interrupt. 3. Clear other status bits (just in case since we found them cleared) 4. Return correct status during the interrupt that will finish the transaction. On next xmit transaction if the bus is still busy the master will issue a recovery process before issuing the new transaction. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09i2c: npcm: Correct register access widthTyrone Ting1-2/+2
[ Upstream commit ea9f8426d17620214ee345ffb77ee6cc196ff14f ] The SMBnCTL3 register is 8-bit wide and the 32-bit access was always incorrect, but simply didn't cause a visible error on the 32-bit machine. On the 64-bit machine, the kernel message reports that ESR value is 0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that it's the alignment fault. SMBnCTL3's address is 0xE. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09i2c: npcm: Fix timeout calculationTali Perry1-4/+4
[ Upstream commit 288b204492fddf28889cea6dc95a23976632c7a0 ] Use adap.timeout for timeout calculation instead of hard-coded value of 35ms. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09i2c: at91: Initialize dma_buf in at91_twi_xfer()Nathan Chancellor1-1/+1
[ Upstream commit 6977262c2eee111645668fe9e235ef2f5694abf7 ] Clang warns: drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (dev->use_dma) { ^~~~~~~~~~~~ drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret); ^~~~~~~ Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op when the first argument is NULL, which will work for the !dev->use_dma case. Fixes: 03fbb903c8bf ("i2c: at91: use dma safe buffers") Link: https://github.com/ClangBuiltLinux/linux/issues/1629 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09i2c: at91: use dma safe buffersMichael Walle1-0/+11
[ Upstream commit 03fbb903c8bf7e53e101e8d9a7b261264317c411 ] The supplied buffer might be on the stack and we get the following error message: [ 3.312058] at91_i2c e0070600.i2c: rejecting DMA map of vmalloc memory Use i2c_{get,put}_dma_safe_msg_buf() to get a DMA-able memory region if necessary. Fixes: 60937b2cdbf9 ("i2c: at91: add dma support") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-06drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllersPiyush Malgujar1-0/+1
[ Upstream commit 03a35bc856ddc09f2cc1f4701adecfbf3b464cb3 ] Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly found for TWSI controllers. Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com> Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-06i2c: ismt: Provide a DMA buffer for Interrupt Cause LoggingMika Westerberg1-0/+14
[ Upstream commit 17a0f3acdc6ec8b89ad40f6e22165a4beee25663 ] Before sending a MSI the hardware writes information pertinent to the interrupt cause to a memory location pointed by SMTICL register. This memory holds three double words where the least significant bit tells whether the interrupt cause of master/target/error is valid. The driver does not use this but we need to set it up because otherwise it will perform DMA write to the default address (0) and this will cause an IOMMU fault such as below: DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set To prevent this from happening, provide a proper DMA buffer for this that then gets mapped by the IOMMU accordingly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()Yang Yingliang1-2/+8
[ Upstream commit a2537c98a8a3b57002e54a262d180b9490bc7190 ] Fix the missing clk_disable_unprepare() before return from mtk_i2c_probe() in the error handling case. Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20i2c: pasemi: Wait for write xfers to finishMartin Povišer1-0/+6
commit bd8963e602c77adc76dbbbfc3417c3cf14fed76b upstream. Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it: * Driver doesn't check for FIFO space. * The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register. Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support. Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08i2c: mux: demux-pinctrl: do not deactivate a master that is not activePeter Rosin1-2/+3
[ Upstream commit 1a22aabf20adf89cb216f566913196128766f25b ] Attempting to rollback the activation of the current master when the current master has not been activated is bad. priv->cur_chan and priv->cur_adap are both still zeroed out and the rollback may result in attempts to revert an of changeset that has not been applied and do result in calls to both del and put the zeroed out i2c_adapter. Maybe it crashes, or whatever, but it's bad in any case. Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08i2c: meson: Fix wrong speed use from probeLucas Tanure1-6/+6
[ Upstream commit cb13aa16f34f794a9cee2626862af8a95f0f0ee9 ] Having meson_i2c_set_clk_div after i2c_add_adapter causes issues for client drivers that try to use the bus before the requested speed is applied. The bus can be used just after i2c_add_adapter, so move i2c_add_adapter to the final step as meson_i2c_set_clk_div needs to be called before the bus is used. Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer") Signed-off-by: Lucas Tanure <tanure@linux.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08i2c: xiic: Make bus names uniqueRobert Hancock1-1/+2
[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ] This driver is for an FPGA logic core, so there can be arbitrarily many instances of the bus on a given system. Previously all of the I2C bus names were "xiic-i2c" which caused issues with lm_sensors when trying to map human-readable names to sensor inputs because it could not properly distinguish the busses, for example. Append the platform device name to the I2C bus name so it is unique between different instances. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 09:05:34 +0300