summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2-12/+15
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits) sh: i2c-sh7760: Replase from ctrl_* to __raw_* sh: clkfwk: Shuffle around to match the intc split up. sh: clkfwk: modify for_each_frequency end condition sh: fix clk_get() error handling sh: clkfwk: Fix fault in frequency iterator. sh: clkfwk: Add a helper for rate rounding by divisor ranges. sh: clkfwk: Abstract rate rounding helper. sh: clkfwk: support clock remapping. sh: pci: Convert to upper/lower_32_bits() helpers. sh: mach-sdk7786: Add support for the FPGA SRAM. sh: Provide a generic SRAM pool for tiny memories. sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786. sh: pci: Support slot 4 routing on SDK7786. sh: Fix up PMB locking. sh: mach-sdk7786: Add support for fpga gpios. sh: use pr_fmt for clock framework, too. sh: remove name and id from struct clk sh: free-without-alloc fix for sh_mobile_lcdcfb sh: perf: Set up perf_max_events. sh: perf: Support SH-X3 hardware counters. ... Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
2010-10-25sh: i2c-sh7760: Replase from ctrl_* to __raw_*Nobuhiro Iwamatsu1-2/+2
ctrl_* is deprecated. We should to use __raw_*. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-24i2c-viapro: Don't log nacksJean Delvare1-7/+1
Transactions not acked can happen every now and then, in particular during device detection, and various transaction types can be used for this purpose. So stop logging this event, except when debugging is enabled. This is what other similar drivers (e.g. i2c-i801 or i2c-piix4) do. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/pca954x: Remove __devinit and __devexit from probe and remove functionsGuenter Roeck1-4/+4
The underlying I2C adapter may or may not be present when this driver gets initialized, and may disappear later, so there is no safe time at which the probe and remove functions can be discarded. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/mux: Driver for PCA9541 I2C Master SelectorGuenter Roeck3-0/+422
This patch adds support for PCA9541, an I2C Bus Master Selector. The driver is modeled as single channel I2C Multiplexer to be able to utilize the I2C multiplexer framework. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Optimize function i2c_detect()Jean Delvare1-7/+6
Check the class flags before allocating the temporary i2c_client structure, to avoid allocating it when we don't need it. Also optimize the inner loop a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
2010-10-24i2c: Discard warning message on device instantiation from user-spaceJean Delvare1-2/+0
The "new_device" sysfs interface has been there for quite some time now, nobody complained about it so it must be good enough. Time to remove the warning and call it stable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-amd8111: Add proper error handlingJulia Lawall1-50/+113
The functions the functions amd_ec_wait_write and amd_ec_wait_read have an unsigned return type, but return a negative constant to indicate an error condition. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Fixing amd_ec_wait_write and amd_ec_wait_read leads to the need to adjust the return type of the functions amd_ec_write and amd_ec_read, which are the only functions that call amd_ec_wait_write and amd_ec_wait_read. amd_ec_write and amd_ec_read, in turn, are only called from within the function amd8111_access, which already returns a signed typed value. Each of the calls to amd_ec_write and amd_ec_read are updated using the following semantic patch: // <smpl> @@ @@ + status = amd_ec_write - amd_ec_write (...); + if (status) return status; @@ @@ + status = amd_ec_read - amd_ec_read (...); + if (status) return status; // </smpl> The patch also adds the declaration of the status variable. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Change to new flag variablematt mooney4-12/+4
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Remove unneeded inclusions of <linux/i2c-id.h>Jean Delvare4-4/+0
These drivers don't use anything which is defined in <linux/i2c-id.h>. This header file was never meant to be included directly anyway, and will be deleted soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Hans Verkuil <hverkuil@xs4all.nl>
2010-10-24i2c: Let i2c_parent_is_i2c_adapter return the parent adapterJean Delvare2-19/+24
This makes the calling site's code clearer IMHO. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-pca-platform: Change device name of request_irqNobuhiro Iwamatsu1-1/+1
i2c->adap.name shouldn't be used in request_irq. Instead the driver name "i2c-pca-platform" should be used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Fix Kconfig dependenciesJean Delvare2-1/+14
drivers/i2c/algos/Kconfig makes all the algorithms dependent on !I2C_HELPER_AUTO, which triggers a Kconfig warning about broken dependencies when some driver selects one of the algorithms. Ideally we would make only the prompts dependent on !I2C_HELPER_AUTO, however Kconfig doesn't currently support that. So we have to redefine the symbols separately for the I2C_HELPER_AUTO=y case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michal Marek <mmarek@suse.cz>
2010-10-22Merge branch 'next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits) powerpc/44x: Update ppc44x_defconfig powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option fsl_rio: Add comments for sRIO registers. powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig powerpc/fsl-booke: Add p5020 DS board support powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes powerpc/fsl-booke: Add support for FSL 64-bit e5500 core powerpc/85xx: add cache-sram support powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board powerpc: Fix compile error with paca code on ppc64e powerpc/fsl-booke: Add p3041 DS board support oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt. powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers powerpc/fsl_booke: Add support to boot from core other than 0 powerpc/p1022: Add probing for individual DMA channels powerpc/fsl_soc: Search all global-utilities nodes for rstccr powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT powerpc/mpc83xx: Support for MPC8308 P1M board ... Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c
2010-10-18i2c-imx: do not allow interruptions when waiting for I2C to completeMarc Kleine-Budde1-9/+3
The i2c_imx_trx_complete() function is using wait_event_interruptible_timeout() to wait for the I2C controller to signal that it has completed an I2C bus operation. If the process that causes the I2C operation receives a signal, the wait will be interrupted, returning an error. It is better to let the I2C operation finished before handling the signal (i.e. returning into userspace). It is safe to use wait_event_timeout() instead, because the timeout will allow the process to exit if the I2C bus hangs. It's also better to allow the I2C operation to finish, because unacknowledged I2C operations can cause the I2C bus to hang. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-18i2c-davinci: Fix TX setup for more SoCsJon Povey1-9/+15
This patch is an improvement to 4bba0fd8d1c6d405df666e2573e1a1f917098be0 which got to mainline a little early. Sudhakar Rajashekhara explains that at least OMAP-L138 requires MDR mode settings before DXR for correct behaviour, so load MDR first with STT cleared and later load again with STT set. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-13i2c/i2c-pasemi.c: Fix unsigned return typeJulia Lawall1-1/+1
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-08Merge branch 'i2c-for-linus' of ↵Linus Torvalds6-38/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: of/i2c: Fix module load order issue caused by of_i2c.c i2c: Fix checks which cause legacy suspend to never get called i2c-pca: Fix waitforcompletion() return value i2c: Fix for suspend/resume issue i2c: Remove obsolete cleanup for clientdata
2010-10-01i2c-s3c2410: fix calculation of SDA line delayMyungJoo Ham1-2/+2
S3C2440 style I2C controller uses PCLK to calculate the SDA line delay. The driver wrongly assumed that this delay is calculated from the frequency that the controller is operating on. This patch fixes this issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-30of/i2c: Fix module load order issue caused by of_i2c.cGrant Likely4-4/+9
Commit 959e85f7, "i2c: add OF-style registration and binding" caused a module dependency loop where of_i2c.c calls functions in i2c-core, and i2c-core calls of_i2c_register_devices() in of_i2c. This means that when i2c support is built as a module when CONFIG_OF is set, then neither i2c_core nor of_i2c are able to be loaded. This patch fixes the problem by moving the of_i2c_register_devices() calls back into the device drivers. Device drivers already specifically request the core code to parse the device tree for devices anyway by setting the of_node pointer, so it isn't a big deal to also call the registration function. The drivers just become slightly more verbose. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c: Fix checks which cause legacy suspend to never get calledRajendra Nayak1-20/+24
For devices which are not adapted to runtime PM a call to pm_runtime_suspended always returns true. Hence the pm_runtime_suspended checks below prevent legacy suspend from getting called. So do a pm_runtime_suspended check only for devices with a dev_pm_ops populated (which hence do not rely on the legacy suspend.) Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c-pca: Fix waitforcompletion() return valueYegor Yefremov2-8/+15
ret is still -1, if during the polling read_byte() returns at once with I2C_PCA_CON_SI set. So ret > 0 would lead *_waitforcompletion() to return 0, in spite of the proper behavior. The routine was rewritten, so that ret has always a proper value, before returning. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c: Fix for suspend/resume issueVishwanath BS1-6/+0
In current i2c core driver, call to pm_runtime_set_active from i2c_device_pm_resume will unconditionally enable i2c module and increment child count of the parent. Because of this, in CPU Idle path, i2c does not idle, preventing Core to enter retention. Also i2c module will not be suspended upon system suspend as pm_runtime_set_suspended is not called from i2c_device_pm_suspend. This issue is fixed by removing pm_runtime_set_active call from resume path which is not necessary. This fix has been tested on OMAP4430. Signed-off-by: Partha Basak <p-basak2@ti.com> Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-28i2c-davinci: Fix race when setting up for TXJon Povey1-3/+3
When setting up to transmit, a race exists between the ISR and i2c_davinci_xfer_msg() trying to load the first byte and adjust counters. This is mostly visible for transmits > 1 byte long. The hardware starts sending immediately that MDR is loaded. IMR trickery doesn't work because if we start sending, finish the first byte and an XRDY event occurs before we load IMR to unmask it, we never get an interrupt, and we timeout. Move the MDR load after DXR,IMR loads to avoid this race without locking. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-28i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on timeoutBernhard Walle1-1/+1
It doesn't make sense to set result to -ETIMEDOUT but return 0 (success) afterwards. Since there's code in octeon_i2c_start() to handle the error, it should be called. Signed-off-by: Bernhard Walle <walle@corscience.de> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-22i2c-omap: Make sure i2c bus is free before setting it to idleMathias Nyman1-0/+2
If the i2c bus receives an interrupt with both BB (bus busy) and ARDY (register access ready) statuses set during the tranfer of the last message the bus was put to idle while still busy. This caused bus to timeout. Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-16Merge branch 'master' of ↵Paul Mundt17-207/+1804
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/include/asm/Kbuild drivers/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-14Merge branch 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linuxLinus Torvalds5-66/+971
* 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linux: i2c/nuc900: add i2c driver support for nuc900 i2c: Enable NXP LPC support in Kconfig i2c-pxa: fix compiler warning, due to missing const i2c: davinci: bus recovery procedure to clear the bus i2c: davinci: Add cpufreq support i2c: davinci: Add suspend/resume support i2c: davinci: Add helper functions for power management i2c: davinci: misc. cleanups: remove MOD_REG_BIT and IO_ADDRESS usage i2c: davinci: Fix smbus Oops with AIC33 usage
2010-08-12Merge branch 'i2c-for-linus' of ↵Linus Torvalds8-61/+671
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: I2C bus multiplexer driver pca954x i2c: Multiplexed I2C bus core support i2c: Use a separate mutex for userspace client lists i2c: Make i2c_default_probe self-sufficient i2c: Drop dummy variable i2c: Move adapter locking helpers to i2c-core V4L/DVB: Use custom I2C probing function mechanism i2c: Add support for custom probe function i2c-dev: Use memdup_user i2c-dev: Remove unnecessary kmalloc casts
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-9/+9
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-11i2c: I2C bus multiplexer driver pca954xMichael Lawnick5-1/+330
I2C driver for PCA954x I2C multiplexer series. Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11i2c: Multiplexed I2C bus core supportMichael Lawnick5-8/+273
Add multiplexed bus core support. I2C multiplexer and switches like pca954x get instantiated as new adapters per port. Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11i2c: Use a separate mutex for userspace client listsJean Delvare1-6/+7
Moving userspace-instantiated clients to separate lists wasn't nearly enough to avoid deadlocks in multiplexed bus cases. We also want to have a dedicated mutex to protect each list. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
2010-08-11i2c: Make i2c_default_probe self-sufficientJean Delvare1-22/+10
Make i2c_default_probe self-sufficient, so that callers don't have to do functionality checks themselves. This ensures everything is and will stay consistent. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11i2c: Drop dummy variableJean Delvare1-3/+2
Now that bus_for_each_drv() is no longer __must_check, we can drop the dummy variable that was used to store the returned value. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Justin P. Mattock <justinmattock@gmail.com>
2010-08-11i2c: Move adapter locking helpers to i2c-coreJean Delvare1-5/+34
Uninline i2c adapter locking helper functions, move them to i2c-core, and use them in i2c-core itself. The functions are still exported for external users. This makes future updates to the locking model (which will be needed for multiplexing support) possible and transparent. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
2010-08-11V4L/DVB: Use custom I2C probing function mechanismJean Delvare1-0/+7
Now that i2c-core offers the possibility to provide custom probing function for I2C devices, let's make use of it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-11i2c: Add support for custom probe functionJean Delvare1-6/+10
The probe method used by i2c_new_probed_device() may not be suitable for all cases. Let the caller provide its own, optional probe function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-11i2c-dev: Use memdup_userJulia Lawall1-16/+6
Use memdup_user when user data is immediately copied into the allocated region. Note that in the second case, the ++i is no longer necessary, as the last value is already freed if needed by the call to memdup_user. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11i2c-dev: Remove unnecessary kmalloc castsJoe Perches1-3/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11Merge branch 'for-2636/i2c/nuc' into next-i2cBen Dooks3-0/+717
2010-08-11Merge branch 'for-2636/i2c/nxp' into next-i2cBen Dooks1-2/+2
2010-08-11Merge branch 'for-2636/i2c/pxa' into next-i2cBen Dooks1-1/+1
2010-08-11i2c/nuc900: add i2c driver support for nuc900Wan ZongShun3-0/+717
This patch is to add i2c driver support for nuc900. Signed-off-by: Wan ZongShun <mcuos.com@gmail.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-11i2c: Enable NXP LPC support in KconfigKevin Wells1-2/+2
NXP LPC series processors use the IP3204 I2C block shared with the Philips PNX4008 processor. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-11i2c-pxa: fix compiler warning, due to missing constMarc Kleine-Budde1-1/+1
This patch adds the missing const to "struct platform_device_id" to fix this warning: /home/frogger/pengutronix/linux/linux-2.6/drivers/i2c/busses/i2c-pxa.c: In function 'i2c_pxa_probe': /home/frogger/pengutronix/linux/linux-2.6/drivers/i2c/busses/i2c-pxa.c:1004: warning: initialization discards qualifiers from pointer target type Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-09Merge branch 'davinci-i2c' of ↵Ben Dooks1-63/+251
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into for-2636/i2c/davinci
2010-08-09Merge branch 'for-rmk' of ↵Russell King1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig
2010-08-06Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King2-38/+85
devel-stable Conflicts: drivers/net/irda/sh_irda.c
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely3-9/+9
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 11:19:07 +0300