summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2023-11-28i2c: i801: fix potential race in i801_block_transaction_byte_by_byteHeiner Kallweit1-10/+9
commit f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream. Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set. Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done(). Reported-by: Jean Delvare <jdelvare@suse.com> Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/ Cc: stable@vger.kernel.org Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28i2c: sun6i-p2wi: Prevent potential division by zeroAxel Lin1-0/+5
[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ] Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The variable set here is later used as a divisor. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()Herve Codina1-1/+1
commit 0fb118de5003028ad092a4e66fc6d07b86c3bc94 upstream. i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()Herve Codina1-1/+1
commit 3dc0ec46f6e7511fc4fdf6b6cda439382bc957f1 upstream. i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()Herve Codina1-1/+1
commit 3171d37b58a76e1febbf3f4af2d06234a98cf88b upstream. i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25i2c: mux: Avoid potential false error message in i2c_mux_add_adapterHeiner Kallweit1-1/+1
[ Upstream commit b13e59e74ff71a1004e0508107e91e9a84fd7388 ] I2C_CLASS_DEPRECATED is a flag and not an actual class. There's nothing speaking against both, parent and child, having I2C_CLASS_DEPRECATED set. Therefore exclude it from the check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i2c: i801: unregister tco_pdev in i801_probe() error pathHeiner Kallweit1-0/+1
commit 3914784553f68c931fc666dbe7e86fe881aada38 upstream. We have to unregister tco_pdev also if i2c_add_adapter() fails. Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()Xiaoke Wang1-0/+4
[ Upstream commit 7c0195fa9a9e263df204963f88a22b21688ffb66 ] devm_kstrdup() returns pointer to allocated string on success, NULL on failure. So it is better to check the return value of it. Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances") Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11treewide: Remove uninitialized_var() usageKees Cook1-1/+1
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycleClark Wang1-2/+2
[ Upstream commit e69b9bc170c6d93ee375a5cbfd15f74c0fb59bdd ] Claim clkhi and clklo as integer type to avoid possible calculation errors caused by data overflow. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14i2c: sprd: Delete i2c adapter in .remove's error pathUwe Kleine-König1-2/+4
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17i2c: omap: Fix standard mode false ACK readingsReid Tonking1-1/+1
commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream. Using standard mode, rare false ACK responses were appearing with i2cdetect tool. This was happening due to NACK interrupt triggering ISR thread before register access interrupt was ready. Removing the NACK interrupt's ability to trigger ISR thread lets register access ready interrupt do this instead. Cc: <stable@vger.kernel.org> # v3.7+ Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support") Signed-off-by: Reid Tonking <reidt@ti.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20i2c: imx-lpi2c: clean rx/tx buffers upon new messageAlexander Stein1-0/+2
[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ] When start sending a new message clear the Rx & Tx buffer pointers in order to avoid using stale pointers. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()Wei Chen1-0/+3
commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream. The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr. Fix this bug by checking the value of writelen. Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen <harperchen1110@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05i2c: imx-lpi2c: check only for enabled interrupt flagsAlexander Stein1-0/+4
[ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ] When reading from I2C, the Tx watermark is set to 0. Unfortunately the TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less than watermark. So it is set in every case, hence the reset default of 1. This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying to send Tx data on a read message. Mask the IRQ status to filter for wanted flags only. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18i2c: ismt: Fix an out-of-bounds bug in ismt_access()Zheyu Ma1-0/+3
[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ] When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug. The following log can reveal it: [ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20 [ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE [ 33.996475] ================================================================== [ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b [ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485 [ 33.999450] Call Trace: [ 34.001849] memcpy+0x20/0x60 [ 34.002077] ismt_access.cold+0x374/0x214b [ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0 [ 34.004007] i2c_smbus_xfer+0x10a/0x390 [ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710 [ 34.005196] i2cdev_ioctl+0x5ec/0x74c Fix this bug by checking the size of 'data->block[0]' first. Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probeHui Tang1-7/+3
[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ] Using pcim_enable_device() to avoid missing pci_disable_device(). Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10i2c: xiic: Add platform module aliasMartin Tůma1-0/+1
[ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ] The missing "platform" alias is required for the mgb4 v4l2 driver to load the i2c controller driver when probing the HW. Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()Alexander Popov1-1/+1
commit 23a27722b5292ef0b27403c87a109feea8296a5c upstream. i2cdev_ioctl_rdwr() allocates i2c_msg.buf using memdup_user(), which returns ZERO_SIZE_PTR if i2c_msg.len is zero. Currently i2cdev_ioctl_rdwr() always dereferences the buf pointer in case of I2C_M_RD | I2C_M_RECV_LEN transfer. That causes a kernel oops in case of zero len. Let's check the len against zero before dereferencing buf pointer. This issue was triggered by syzkaller. Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [wsa: use '< 1' instead of '!' for easier readability] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> [Harshit: backport to 4.14.y, use rdwr_pa[i].len instead of msgs[i].len as the 4.14.y code uses rdwr_pa.] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25i2c: mux-gpmux: Add of_node_put() when breaking out of loopLiang He1-0/+1
[ Upstream commit 6435319c34704994e19b0767f6a4e6f37439867b ] In i2c_mux_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which will automatically increase and decrease the refcount. Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25i2c: cadence: Support PEC for SMBus block readLars-Peter Clausen1-1/+9
[ Upstream commit 9fdf6d97f03035ad5298e2d1635036c74c2090ed ] SMBus packet error checking (PEC) is implemented by appending one additional byte of checksum data at the end of the message. This provides additional protection and allows to detect data corruption on the I2C bus. SMBus block reads support variable length reads. The first byte in the read message is the number of available data bytes. The combination of PEC and block read is currently not supported by the Cadence I2C driver. * When PEC is enabled the maximum transfer length for block reads increases from 33 to 34 bytes. * The I2C core smbus emulation layer relies on the driver updating the `i2c_msg` `len` field with the number of received bytes. The updated length is used when checking the PEC. Add support to the Cadence I2C driver for handling SMBus block reads with PEC. To determine the maximum transfer length uses the initial `len` value of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled it will be 1. Once a read transfer is done also increment the `len` field by the amount of received data bytes. This change has been tested with a UCM90320 PMBus power monitor, which requires block reads to access certain data fields, but also has PEC enabled by default. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25i2c: Fix a potential use after freeXu Wang1-1/+2
[ Upstream commit e4c72c06c367758a14f227c847f9d623f1994ecf ] Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. Fixes: 611e12ea0f12 ("i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter") Signed-off-by: Xu Wang <vulab@iscas.ac.cn> [wsa: added comment to the code, added Fixes tag] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29i2c: cadence: Change large transfer count reset logic to be unconditionalRobert Hancock1-25/+5
[ Upstream commit 4ca8ca873d454635c20d508261bfc0081af75cf8 ] Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12i2c: cadence: Unregister the clk notifier in error pathSatish Nagireddy1-0/+1
[ Upstream commit 3501f0c663063513ad604fb1b3f06af637d3396d ] This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14i2c: cadence: Increase timeout per message if necessaryLucas Tanure1-2/+10
[ Upstream commit 96789dce043f5bff8b7d62aa28d52a7c59403a84 ] Timeout as 1 second sets an upper limit on the length of the transfer executed, but there is no maximum length of a write or read message set in i2c_adapter_quirks for this controller. This upper limit affects devices that require sending large firmware blobs over I2C. To remove that limitation, calculate the minimal time necessary, plus some wiggle room, for every message and use it instead of the default one second, if more than one second. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-06drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllersPiyush Malgujar1-0/+1
[ Upstream commit 03a35bc856ddc09f2cc1f4701adecfbf3b464cb3 ] Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly found for TWSI controllers. Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com> Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20i2c: pasemi: Wait for write xfers to finishMartin Povišer1-0/+6
commit bd8963e602c77adc76dbbbfc3417c3cf14fed76b upstream. Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it: * Driver doesn't check for FIFO space. * The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register. Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support. Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20i2c: mux: demux-pinctrl: do not deactivate a master that is not activePeter Rosin1-2/+3
[ Upstream commit 1a22aabf20adf89cb216f566913196128766f25b ] Attempting to rollback the activation of the current master when the current master has not been activated is bad. priv->cur_chan and priv->cur_adap are both still zeroed out and the rollback may result in attempts to revert an of changeset that has not been applied and do result in calls to both del and put the zeroed out i2c_adapter. Maybe it crashes, or whatever, but it's bad in any case. Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20i2c: xiic: Make bus names uniqueRobert Hancock1-1/+2
[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ] This driver is for an FPGA logic core, so there can be arbitrarily many instances of the bus on a given system. Previously all of the I2C bus names were "xiic-i2c" which caused issues with lm_sensors when trying to map human-readable names to sensor inputs because it could not properly distinguish the busses, for example. Append the platform device name to the I2C bus name so it is unique between different instances. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08i2c: qup: allow COMPILE_TESTWolfram Sang1-1/+1
[ Upstream commit 5de717974005fcad2502281e9f82e139ca91f4bb ] Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08i2c: cadence: allow COMPILE_TESTWolfram Sang1-1/+1
[ Upstream commit 0b0dcb3882c8f08bdeafa03adb4487e104d26050 ] Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <wsa@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08i2c: bcm2835: Avoid clock stretching timeoutsEric Anholt1-0/+11
[ Upstream commit 9495b9b31abe525ebd93da58de2c88b9f66d3a0e ] The CLKT register contains at poweron 0x40, which at our typical 100kHz bus rate means .64ms. But there is no specified limit to how long devices should be able to stretch the clocks, so just disable the timeout. We still have a timeout wrapping the entire transfer. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> BugLink: https://github.com/raspberrypi/linux/issues/3064 Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23i2c: brcmstb: fix support for DSL and CM variantsRafał Miłecki1-1/+1
commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27i2c: designware-pci: Fix to change data types of hcnt and lcnt parametersLakshmi Sowjanya D1-4/+4
[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ] The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16. It's better to have same data type in struct dw_scl_sda_cfg as well. Reported-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27i2c: mpc: Correct I2C reset procedureJoakim Tjernlund1-8/+15
[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ] Current I2C reset procedure is broken in two ways: 1) It only generate 1 START instead of 9 STARTs and STOP. 2) It leaves the bus Busy so every I2C xfer after the first fixup calls the reset routine again, for every xfer there after. This fixes both errors. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27i2c: i801: Don't silently correct invalid transfer sizeHeiner Kallweit1-10/+5
[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ] If an invalid block size is provided, reject it instead of silently changing it to a supported value. Especially critical I see the case of a write transfer with block length 0. In this case we have no guarantee that the byte we would write is valid. When silently reducing a read to 32 bytes then we don't return an error and the caller may falsely assume that we returned the full requested data. If this change should break any (broken) caller, then I think we should fix the caller. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22i2c: rk3x: Handle a spurious start completion interrupt flagOndrej Jirman1-2/+2
[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ] In a typical read transfer, start completion flag is being set after read finishes (notice ipd bit 4 being set): trasnfer poll=0 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33 This causes I2C transfer being aborted in polled mode from a stop completion handler: trasnfer poll=1 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0 rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13 i2c stop rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10 Clearing the START flag after read fixes the issue without any obvious side effects. This issue was dicovered on RK3566 when adding support for powering off the RK817 PMIC. Signed-off-by: Ondrej Jirman <megous@megous.com> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'Christophe JAILLET1-1/+5
[ Upstream commit 7f98960c046ee1136e7096aee168eda03aef8a5d ] A successful 'clk_prepare()' call should be balanced by a corresponding 'clk_unprepare()' call in the error handling path of the probe, as already done in the remove function. More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is also already called. So just the unprepare step has still to be done. Update the error handling path accordingly. Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-17i2c: acpi: fix resource leak in reconfiguration device additionJamie Iles1-0/+1
[ Upstream commit 6558b646ce1c2a872fe1c2c7cb116f05a2c1950f ] acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: fixed title] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22i2c: mt65xx: fix IRQ checkSergey Shtylyov1-1/+1
[ Upstream commit 58fb7c643d346e2364404554f531cfa6a1a3917c ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22i2c: s3c2410: fix IRQ checkSergey Shtylyov1-1/+1
[ Upstream commit d6840a5e370b7ea4fde16ce2caf431bcc87f9a75 ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22i2c: iop3xx: fix deferred probingSergey Shtylyov1-4/+2
[ Upstream commit a1299505162ad00def3573260c2c68b9c8e8d697 ] When adding the code to handle platform_get_irq*() errors in the commit 489447380a29 ("handle errors returned by platform_get_irq*()"), the actual error code was enforced to be -ENXIO in the driver for some strange reason. This didn't matter much until the deferred probing was introduced -- which requires an actual error code to be propagated upstream from the failure site. While fixing this, also stop overriding the errors from request_irq() to -EIO (done since the pre-git era). Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22i2c: highlander: add IRQ checkSergey Shtylyov1-1/+1
[ Upstream commit f16a3bb69aa6baabf8f0aca982c8cf21e2a4f6bc ] The driver is written as if platform_get_irq() returns 0 on errors (while actually it returns a negative error code), blithely passing these error codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with -EINVAL. Add the necessary error check to the pre-existing *if* statement forcing the driver into the polling mode... Fixes: 4ad48e6ab18c ("i2c: Renesas Highlander FPGA SMBus support") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26i2c: dev: zero out array used for i2c reads from userspaceGreg Kroah-Hartman1-2/+3
commit 86ff25ed6cd8240d18df58930bd8848b19fce308 upstream. If an i2c driver happens to not provide the full amount of data that a user asks for, it is possible that some uninitialized data could be sent to userspace. While all in-kernel drivers look to be safe, just be sure by initializing the buffer to zero before it is passed to the i2c driver so that any future drivers will not have this issue. Also properly copy the amount of data recvieved to the userspace buffer, as pointed out by Dan Carpenter. Reported-by: Eric Dumazet <edumazet@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20i2c: core: Disable client irq on reboot/shutdownDmitry Torokhov1-0/+3
[ Upstream commit b64210f2f7c11c757432ba3701d88241b2b98fb1 ] If an i2c client receives an interrupt during reboot or shutdown it may be too late to service it by making an i2c transaction on the bus because the i2c controller has already been shutdown. This can lead to system hangs if the i2c controller tries to make a transfer that is doomed to fail because the access to the i2c pins is already shut down, or an iommu translation has been torn down so i2c controller register access doesn't work. Let's simply disable the irq if there isn't a shutdown callback for an i2c client when there is an irq associated with the device. This will make sure that irqs don't come in later than the time that we can handle it. We don't do this if the i2c client device already has a shutdown callback because presumably they're doing the right thing and quieting the device so irqs don't come in after the shutdown callback returns. Reported-by: kernel test robot <lkp@intel.com> [swboyd@chromium.org: Dropped newline, added commit text, added interrupt.h for robot build error] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30i2c: robotfuzz-osif: fix control-request directionsJohan Hovold1-2/+2
commit 4ca070ef0dd885616ef294d269a9bf8e3b258e1a upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously used the osif_usb_read() helper and set the IN direction bit. Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16i2c: mpc: implement erratum A-004447 workaroundChris Packham1-1/+78
[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ] The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16i2c: mpc: Make use of i2c_recover_bus()Chris Packham1-2/+16
[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ] Move the existing calls of mpc_i2c_fixup() to a recovery function registered via bus_recovery_info. This makes it more obvious that recovery is supported and allows for a future where recovery is triggered by the i2c core. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03i2c: i801: Don't generate an interrupt on bus resetJean Delvare1-4/+2
commit e4d8716c3dcec47f1557024add24e1f3c09eb24b upstream. Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions") Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03i2c: s3c2410: fix possible NULL pointer deref on read message after writeKrzysztof Kozlowski1-0/+3
commit 24990423267ec283b9d86f07f362b753eb9b0ed5 upstream. Interrupt handler processes multiple message write requests one after another, till the driver message queue is drained. However if driver encounters a read message without preceding START, it stops the I2C transfer as it is an invalid condition for the controller. At least the comment describes a requirement "the controller forces us to send a new START when we change direction". This stop results in clearing the message queue (i2c->msg = NULL). The code however immediately jumped back to label "retry_write" which dereferenced the "i2c->msg" making it a possible NULL pointer dereference. The Coverity analysis: 1. Condition !is_msgend(i2c), taking false branch. if (!is_msgend(i2c)) { 2. Condition !is_lastmsg(i2c), taking true branch. } else if (!is_lastmsg(i2c)) { 3. Condition i2c->msg->flags & 1, taking true branch. if (i2c->msg->flags & I2C_M_RD) { 4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL. s3c24xx_i2c_stop(i2c, -EINVAL); 5. Jumping to label retry_write. goto retry_write; 6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg. if (!is_msgend(i2c)) {" All previous calls to s3c24xx_i2c_stop() in this interrupt service routine are followed by jumping to end of function (acknowledging the interrupt and returning). This seems a reasonable choice also here since message buffer was entirely emptied. Addresses-Coverity: Explicit null dereferenced Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-04 02:08:15 +0300