summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-meson.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-26i2c: meson: update doc description to fix build warningsYixun Lan1-1/+1
Add description for 'data' parameter and drop unused 'irq' memeber. Here is the warnings: drivers/i2c/busses/i2c-meson.c:103: warning: No description found for parameter 'data' drivers/i2c/busses/i2c-meson.c:103: warning: Excess struct member 'irq' description in 'meson_i2c' Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-24i2c: meson: add configurable divider factorsJian Hu1-4/+28
This patch try to add support for I2C controller in Meson-AXG SoC, Due to the IP changes between I2C controller, we need to introduce a compatible data to make the divider factor configurable. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: improve and simplify interrupt handlerHeiner Kallweit1-30/+10
The preceding changes in this patch series now allow to simplify the interrupt handler significantly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: remove meson_i2c_write_tokensHeiner Kallweit1-10/+4
meson_i2c_write_tokens is always called directly after meson_i2c_prepare_xfer (and only then). So we can simplify the code by removing meson_i2c_write_tokens and moving the two statements of meson_i2c_write_tokens to the end of meson_i2c_prepare_xfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: don't create separate token chain just for the stop commandHeiner Kallweit1-18/+5
We can directly add the stop token to the token chain including the last transfer chunk. This is more efficient than creating a separate token chain just for the stop command. And it allows us to get rid of state STATE_STOP completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: improve interrupt handler and detect spurious interruptsHeiner Kallweit1-4/+7
If state is STATE_IDLE no interrupt should occur. Return IRQ_NONE if such a spurious interrupt is detected. Not having to take care of STATE_IDLE later in the interrupt handler allows to further simplify the interrupt handler in subsequent patches of this series. In addition move resetting REG_CTRL_START bit to the start of the interrupt handler to ensure that the start bit is always reset. Currently the start bit is not reset for STATE_STOP because i2c->state is set to STATE_IDLE. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: remove variable count from meson_i2c_xferHeiner Kallweit1-3/+2
Variable count has always the same value as i, so we don't need it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: use full 12 bits for clock dividerHeiner Kallweit1-2/+14
The clock divider has 12 bits, splitted into a 10 bit field and a 2 bit field. The extra 2 bits aren't used currently. Change this to use the full 12 bits and warn if the requested frequency is too low. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: use i2c core for DT clock-frequency parsingHeiner Kallweit1-5/+3
We don't have to parse the DT manually to retrieve the bus frequency and we don't have to maintain an own default for the bus frequency. Let the i2c core do this for us. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: set clock divider in probe instead of setting it for each transferHeiner Kallweit1-9/+8
The bus frequency is fixed to what is set DT, therefore we can set the clock divider in probe already and we don't have to set it for each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: remove member irq from struct meson_i2cHeiner Kallweit1-7/+5
Member irq can be replaced with a local variable in probe because it's nowhere else accessed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-30i2c: meson: use min instead of min_t where min_t isn't neededHeiner Kallweit1-5/+5
Use min instead of min_t where min_t isn't needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08i2c: meson: fix wrong variable usage in meson_i2c_put_dataHeiner Kallweit1-1/+1
Most likely a copy & paste error. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller")
2016-09-15i2c: meson: add gxbb compatible stringNeil Armstrong1-0/+1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-22i2c: don't print error when adding adapter failsWolfram Sang1-1/+0
The core will do this for us now. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-15i2c: meson: Use complete() instead of complete_all()Daniel Wagner1-3/+3
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: meson_i2c_xfer_msg() reinit_completion() ... /* Start the transfer */ ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-20i2c: meson: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-11-18i2c: add support for Amlogic Meson I2C controllerBeniamino Galvani1-0/+492
This is a driver for the I2C controller found in Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 06:45:24 +0300