summaryrefslogtreecommitdiff
path: root/drivers/hwtracing
AgeCommit message (Collapse)AuthorFilesLines
2026-03-04coresight: etm3x: Fix cpulocked warning on cpuhpAntonio Borneo1-6/+6
[ Upstream commit 1feb0377b9b816f89a04fc381eb19fc6bac9f4a4 ] When changes [1] and [2] have been applied to the driver etm4x, the same modifications have been also collapsed in [3] and applied in one shot to the driver etm3x. While doing this, the driver etm3x has not been aligned to etm4x on the use of non cpuslocked version of cpuhp callback setup APIs. The current code triggers two run-time warnings when the kernel is compiled with CONFIG_PROVE_LOCKING=y. Use non cpuslocked version of cpuhp callback setup APIs in driver etm3x, aligning it to the driver etm4x. [1] commit 2d1a8bfb61ec ("coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init") [2] commit 22a550a306ad ("coresight: etm4x: Allow etm4x to be built as a module") [3] commit 97fe626ce64c ("coresight: etm3x: Allow etm3x to be built as a module") Fixes: 97fe626ce64c ("coresight: etm3x: Allow etm3x to be built as a module") Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20260108152427.357379-1-antonio.borneo@foss.st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-30intel_th: fix device leak on output open()Johan Hovold1-3/+16
commit 95fc36a234da24bbc5f476f8104a5a15f99ed3e3 upstream. Make sure to drop the reference taken when looking up the th device during output device open() on errors and on close(). Note that a recent commit fixed the leak in a couple of open() error paths but not all of them, and the reference is still leaking on successful open(). Fixes: 39f4034693b7 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Fixes: 6d5925b667e4 ("intel_th: Fix error handling in intel_th_output_open") Cc: stable@vger.kernel.org # 4.4: 6d5925b667e4 Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20251208153524.68637-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-08intel_th: Fix error handling in intel_th_output_openMa Ke1-5/+15
commit 6d5925b667e4ed9e77c8278cc215191d29454a3f upstream. intel_th_output_open() calls bus_find_device_by_devt() which internally increments the device reference count via get_device(), but this reference is not properly released in several error paths. When device driver is unavailable, file operations cannot be obtained, or the driver's open method fails, the function returns without calling put_device(), leading to a permanent device reference count leak. This prevents the device from being properly released and could cause resource exhaustion over time. Found by code review. Cc: stable <stable@kernel.org> Fixes: 39f4034693b7 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://patch.msgid.link/20251112091723.35963-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-18coresight: etm4x: Add context synchronization before enabling traceLeo Yan1-4/+23
[ Upstream commit 64eb04ae545294e105ad91714dc3167a0b660731 ] According to the software usage PKLXF in Arm ARM (ARM DDI 0487 L.a), a Context synchronization event is required before enabling the trace unit. An ISB is added to meet this requirement, particularly for guarding the operations in the flow: etm4x_allow_trace() `> kvm_tracing_set_el1_configuration() `> write_sysreg_s(trfcr_while_in_guest, SYS_TRFCR_EL12) Improved the barrier comments to provide more accurate information. Fixes: 1ab3bb9df5e3 ("coresight: etm4x: Add necessary synchronization for sysreg access") Reviewed-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Yeoreun Yun <yeoreum.yun@arm.com> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-5-f55553b6c8b3@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18coresight: etm4x: Extract the trace unit controllingLeo Yan1-41/+62
[ Upstream commit 40f682ae5086366d51e29e66eb8a344501245d0d ] The trace unit is controlled in the ETM hardware enabling and disabling. The sequential changes for support AUX pause and resume will reuse the same operations. Extract the operations in the etm4_{enable|disable}_trace_unit() functions. A minor improvement in etm4_enable_trace_unit() is for returning the timeout error to callers. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250401180708.385396-2-leo.yan@arm.com Stable-dep-of: 64eb04ae5452 ("coresight: etm4x: Add context synchronization before enabling trace") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18coresight: etm4x: Correct polling IDLE bitLeo Yan1-1/+1
[ Upstream commit 4dc4e22f9536341255f5de6047977a80ff47eaef ] Since commit 4ff6039ffb79 ("coresight-etm4x: add isb() before reading the TRCSTATR"), the code has incorrectly been polling the PMSTABLE bit instead of the IDLE bit. This commit corrects the typo. Fixes: 4ff6039ffb79 ("coresight-etm4x: add isb() before reading the TRCSTATR") Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-4-f55553b6c8b3@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: Fix incorrect handling for return value of devm_kzallocLin Yujun1-1/+1
[ Upstream commit 70714eb7243eaf333d23501d4c7bdd9daf011c01 ] The return value of devm_kzalloc could be an null pointer, use "!desc.pdata" to fix incorrect handling return value of devm_kzalloc. Fixes: 4277f035d227 ("coresight: trbe: Add a representative coresight_platform_data for TRBE") Signed-off-by: Lin Yujun <linyujun809@h-partners.com> Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250908122022.1315399-1-linyujun809@h-partners.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: tpda: fix the logic to setup the element sizeJie Gan1-0/+3
[ Upstream commit 43e0a92c04de7c822f6104abc73caa4a857b4a02 ] Some TPDM devices support both CMB and DSB datasets, requiring the system to enable the port with both corresponding element sizes. Currently, the logic treats tpdm_read_element_size as successful if the CMB element size is retrieved correctly, regardless of whether the DSB element size is obtained. This behavior causes issues when parsing data from TPDM devices that depend on both element sizes. To address this, the function should explicitly fail if the DSB element size cannot be read correctly. Fixes: e6d7f5252f73 ("coresight-tpda: Add support to configure CMB element") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250906-fix_element_size_issue-v2-1-dbb0ac2541a9@oss.qualcomm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: trbe: Return NULL pointer for allocation failuresLeo Yan1-3/+3
[ Upstream commit 8a55c161f7f9c1aa1c70611b39830d51c83ef36d ] When the TRBE driver fails to allocate a buffer, it currently returns the error code "-ENOMEM". However, the caller etm_setup_aux() only checks for a NULL pointer, so it misses the error. As a result, the driver continues and eventually causes a kernel panic. Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on allocation failures. This allows that the callers can properly handle the failure. Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver") Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250904-cs_etm_auxsetup_fix_error_handling-v2-1-a502d0bafb95@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: etm4x: Support atclkLeo Yan2-6/+18
[ Upstream commit 40c0cdc9cbbebae9f43bef1cab9ce152318d0cce ] The atclk is an optional clock for the CoreSight ETMv4, but the driver misses to initialize it. This change enables atclk in probe of the ETMv4 driver, and dynamically control the clock during suspend and resume. No need to check the driver data and clock pointer in the runtime suspend and resume, so remove checks. And add error handling in the resume function. Add a minor fix to the comment format when adding the atclk field. Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver") Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-3-1dfe10bb3f6f@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: catu: Support atclkLeo Yan2-5/+18
[ Upstream commit 5483624effea2e893dc0df6248253a6a2a085451 ] The atclk is an optional clock for the CoreSight CATU, but the driver misses to initialize it. This change enables atclk in probe of the CATU driver, and dynamically control the clock during suspend and resume. The checks for driver data and clocks in suspend and resume are not needed, remove them. Add error handling in the resume function. Fixes: fcacb5c154ba ("coresight: Introduce support for Coresight Address Translation Unit") Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-2-1dfe10bb3f6f@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: tmc: Support atclkLeo Yan2-5/+19
[ Upstream commit 8a79026926b329d4ab0c6d0921373a80ec8aab6e ] The atclk is an optional clock for the CoreSight TMC, but the driver misses to initialize it. In most cases, TMC shares the atclk clock with other CoreSight components. Since these components enable the clock before the TMC device is initialized, the TMC continues properly, which is why we don’t observe any lockup issues. This change enables atclk in probe of the TMC driver. Given the clock is optional, it is possible to return NULL if the clock does not exist. IS_ERR() is tolerant for this case. Dynamically disable and enable atclk during suspend and resume. The clock pointers will never be error values if the driver has successfully probed, and the case of a NULL pointer case will be handled by the clock core layer. The driver data is always valid after probe. Therefore, remove the related checks. Also in the resume flow adds error handling. Fixes: bc4bf7fe98da ("coresight-tmc: add CoreSight TMC driver") Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-1-1dfe10bb3f6f@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight-etm4x: Conditionally access register TRCEXTINSELRYuanfang Zhang2-3/+10
[ Upstream commit dcdc42f5dcf9b9197c51246c62966e2d54a033d8 ] The TRCEXTINSELR is only implemented if TRCIDR5.NUMEXTINSEL > 0. To avoid invalid accesses, introduce a check on numextinsel (derived from TRCIDR5[11:9]) before reading or writing to this register. Fixes: f5bd523690d2 ("coresight: etm4x: Convert all register accesses") Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com> Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250812-trcextinselr_issue-v2-1-e6eb121dfcf4@oss.qualcomm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: Only register perf symlink for sinks with alloc_bufferYuanfang Zhang1-2/+3
[ Upstream commit 12d9a9dd9d8a4f1968073e7f34515896d1e22b78 ] Ensure that etm_perf_add_symlink_sink() is only called for devices that implement the alloc_buffer operation. This prevents invalid symlink creation for dummy sinks that do not implement alloc_buffer. Without this check, perf may attempt to use a dummy sink that lacks alloc_buffer operationsu to initialise perf's ring buffer, leading to runtime failures. Fixes: 9d3ba0b6c0569 ("Coresight: Add coresight dummy driver") Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250630-etm_perf_sink-v1-1-e4a7211f9ad7@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15coresight: trbe: Prevent overflow in PERF_IDX2OFF()Leo Yan1-1/+2
[ Upstream commit 105f56877f2d5f82d71e20b45eb7be7c24c3d908 ] Cast nr_pages to unsigned long to avoid overflow when handling large AUX buffer sizes (>= 2 GiB). Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver") Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06coresight: Only check bottom two claim bitsJames Clark2-1/+3
[ Upstream commit a4e65842e1142aa18ef36113fbd81d614eaefe5a ] The use of the whole register and == could break the claim mechanism if any of the other bits are used in the future. The referenced doc "PSCI - ARM DEN 0022D" also says to only read and clear the bottom two bits. Use FIELD_GET() to extract only the relevant part. Reviewed-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250325-james-coresight-claim-tags-v4-2-dfbd3822b2e5@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19coresight: prevent deactivate active config while enabling the configYeoreum Yun2-16/+35
[ Upstream commit 408c97c4a5e0b634dcd15bf8b8808b382e888164 ] While enable active config via cscfg_csdev_enable_active_config(), active config could be deactivated via configfs' sysfs interface. This could make UAF issue in below scenario: CPU0 CPU1 (sysfs enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() unload module // access to config_desc which freed // while unloading module. cscfg_csdev_enable_config To address this, use cscfg_config_desc's active_cnt as a reference count which will be holded when - activate the config. - enable the activated config. and put the module reference when config_active_cnt == 0. Fixes: f8cce2ff3c04 ("coresight: syscfg: Add API to activate and enable configurations") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19coresight: catu: Introduce refcount and spinlock for enabling/disablingYabin Cui2-8/+18
[ Upstream commit a03a0a08c6fe5e50c1b12ea41b9e228e7f649c22 ] When tracing ETM data on multiple CPUs concurrently via the perf interface, the CATU device is shared across different CPU paths. This can lead to race conditions when multiple CPUs attempt to enable or disable the CATU device simultaneously. To address these race conditions, this patch introduces the following changes: 1. The enable and disable operations for the CATU device are not reentrant. Therefore, a spinlock is added to ensure that only one CPU can enable or disable a given CATU device at any point in time. 2. A reference counter is used to manage the enable/disable state of the CATU device. The device is enabled when the first CPU requires it and is only disabled when the last CPU finishes using it. This ensures the device remains active as long as at least one CPU needs it. Fixes: fcacb5c154ba ("coresight: Introduce support for Coresight Address Translation Unit") Signed-off-by: Yabin Cui <yabinc@google.com> Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250429231301.1952246-2-yabinc@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19coresight: Fixes device's owner field for registered using ↵Junhao He8-10/+13
coresight_init_driver() [ Upstream commit 9f52aecc952ddf307571517d5c91136c8c4e87c9 ] The coresight_init_driver() of the coresight-core module is called from the sub coresgiht device (such as tmc/stm/funnle/...) module. It calls amba_driver_register() and Platform_driver_register(), which are macro functions that use the coresight-core's module to initialize the caller's owner field. Therefore, when the sub coresight device calls coresight_init_driver(), an incorrect THIS_MODULE value is captured. The sub coesgiht modules can be removed while their callbacks are running, resulting in a general protection failure. Add module parameter to coresight_init_driver() so can be called with the module of the callback. Fixes: 075b7cd7ad7d ("coresight: Add helpers registering/removing both AMBA and platform drivers") Signed-off-by: Junhao He <hejunhao3@huawei.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240918035327.9710-1-hejunhao3@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29coresight-etb10: change etb_drvdata spinlock's type to raw_spinlock_tYeoreum Yun1-13/+13
[ Upstream commit 6b80c0abe475ed1017c5e862636049aa1cc17a1a ] In coresight-etb10 drivers, etb_drvdata->spinlock can be held during __schedule() by perf_event_task_sched_out()/in(). Since etb_drvdata->spinlock type is spinlock_t and perf_event_task_sched_out()/in() is called after acquiring rq_lock, which is raw_spinlock_t (an unsleepable lock), this poses an issue in PREEMPT_RT kernel where spinlock_t is sleepable. To address this, change type etb_drvdata->spinlock in coresight-etb10 drivers, which can be called by perf_event_task_sched_out()/in(), from spinlock_t to raw_spinlock_t. Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250306121110.1647948-6-yeoreum.yun@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29intel_th: avoid using deprecated page->mapping, index fieldsLorenzo Stoakes2-24/+8
[ Upstream commit 8e553520596bbd5ce832e26e9d721e6a0c797b8b ] The struct page->mapping, index fields are deprecated and soon to be only available as part of a folio. It is likely the intel_th code which sets page->mapping, index is was implemented out of concern that some aspect of the page fault logic may encounter unexpected problems should they not. However, the appropriate interface for inserting kernel-allocated memory is vm_insert_page() in a VM_MIXEDMAP. By using the helper function vmf_insert_mixed() we can do this with minimal churn in the existing fault handler. By doing so, we bypass the remainder of the faulting logic. The pages are still pinned so there is no possibility of anything unexpected being done with the pages once established. It would also be reasonable to pre-map everything on fault, however to minimise churn we retain the fault handler. We also eliminate all code which clears page->mapping on teardown as this has now become unnecessary. The MSU code relies on faulting to function correctly, so is by definition dependent on CONFIG_MMU. We avoid spurious reports about compilation failure for unsupported platforms by making this requirement explicit in Kconfig as part of this change too. Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20250331125608.60300-1-lorenzo.stoakes@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10coresight-etm4x: add isb() before reading the TRCSTATRYuanfang Zhang2-10/+58
[ Upstream commit 4ff6039ffb79a4a8a44b63810a8a2f2b43264856 ] As recommended by section 4.3.7 ("Synchronization when using system instructions to progrom the trace unit") of ARM IHI 0064H.b, the self-hosted trace analyzer must perform a Context synchronization event between writing to the TRCPRGCTLR and reading the TRCSTATR. Additionally, add an ISB between the each read of TRCSTATR on coresight_timeout() when using system instructions to program the trace unit. Fixes: 1ab3bb9df5e3 ("coresight: etm4x: Add necessary synchronization for sysreg access") Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250116-etm_sync-v4-1-39f2b05e9514@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10coresight: catu: Fix number of pages while using 64k pagesIlkka Koskinen1-1/+1
[ Upstream commit 0e14e062f5ff98aa15264dfa87c5f5e924028561 ] Trying to record a trace on kernel with 64k pages resulted in -ENOMEM. This happens due to a bug in calculating the number of table pages, which returns zero. Fix the issue by rounding up. $ perf record --kcore -e cs_etm/@tmc_etr55,cycacc,branch_broadcast/k --per-thread taskset --cpu-list 1 dd if=/dev/zero of=/dev/null failed to mmap with 12 (Cannot allocate memory) Fixes: 8ed536b1e283 ("coresight: catu: Add support for scatter gather tables") Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250109215348.5483-1-ilkka@os.amperecomputing.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13intel_th: pci: Add Panther Lake-P/U supportAlexander Shishkin1-0/+5
commit 49114ff05770264ae233f50023fc64a719a9dcf9 upstream. Add support for the Trace Hub in Panther Lake-P/U. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20250211185017.1759193-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13intel_th: pci: Add Panther Lake-H supportAlexander Shishkin1-0/+5
commit a70034d6c0d5f3cdee40bb00a578e17fd2ebe426 upstream. Add support for the Trace Hub in Panther Lake-H. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20250211185017.1759193-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13intel_th: pci: Add Arrow Lake supportPawel Chmielewski1-0/+5
commit b5edccae9f447a92d475267d94c33f4926963eec upstream. Add support for the Trace Hub in Arrow Lake. Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20250211185017.1759193-4-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-27[tree-wide] finally take no_llseek outAl Viro5-5/+0
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-08-20coresight: Make trace ID map spinlock local to the mapJames Clark2-14/+13
Reduce contention on the lock by replacing the global lock with one for each map. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-18-james.clark@linaro.org
2024-08-20coresight: Emit sink ID in the HW_ID packetsJames Clark3-17/+26
For Perf to be able to decode when per-sink trace IDs are used, emit the sink that's being written to for each ETM. Perf currently errors out if it sees a newer packet version so instead of bumping it, add a new minor version field. This can be used to signify new versions that have backwards compatible fields. Considering this change is only for high core count machines, it doesn't make sense to make a breaking change for everyone. Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-17-james.clark@linaro.org
2024-08-20coresight: Remove pending trace ID release mechanismJames Clark3-75/+41
Pending the release of IDs was a way of managing concurrent sysfs and Perf sessions in a single global ID map. Perf may have finished while sysfs hadn't, and Perf shouldn't release the IDs in use by sysfs and vice versa. Now that Perf uses its own exclusive ID maps, pending release doesn't result in any different behavior than just releasing all IDs when the last Perf session finishes. As part of the per-sink trace ID change, we would have still had to make the pending mechanism work on a per-sink basis, due to the overlapping ID allocations, so instead of making that more complicated, just remove it. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-16-james.clark@linaro.org
2024-08-20coresight: Use per-sink trace ID maps for Perf sessionsJames Clark8-17/+38
This will allow sessions with more than CORESIGHT_TRACE_IDS_MAX ETMs as long as there are fewer than that many ETMs connected to each sink. Each sink owns its own trace ID map, and any Perf session connecting to that sink will allocate from it, even if the sink is currently in use by other users. This is similar to the existing behavior where the dynamic trace IDs are constant as long as there is any concurrent Perf session active. It's not completely optimal because slightly more IDs will be used than necessary, but the optimal solution involves tracking the PIDs of each session and allocating ID maps based on the session owner. This is difficult to do with the combination of per-thread and per-cpu modes and some scheduling issues. The complexity of this isn't likely to worth it because even with multiple users they'd just see a difference in the ordering of ID allocations rather than hitting any limits (unless the hardware does have too many ETMs connected to one sink). Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-15-james.clark@linaro.org
2024-08-20coresight: Make CPU id map a property of a trace ID mapJames Clark1-7/+9
The global CPU ID mappings won't work for per-sink ID maps so move it to the ID map struct. coresight_trace_id_release_all_pending() is hard coded to operate on the default map, but once Perf sessions use their own maps the pending release mechanism will be deleted. So it doesn't need to be extended to accept a trace ID map argument at this point. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-14-james.clark@linaro.org
2024-08-20coresight: Expose map arguments in trace ID APIJames Clark2-11/+45
The trace ID API is currently hard coded to always use the global map. Add public versions that allow the map to be passed in so that Perf mode can use per-sink maps. Keep the non-map versions so that sysfs mode can continue to use the default global map. System ID functions are unchanged because they will always use the default map. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-13-james.clark@linaro.org
2024-08-20coresight: Move struct coresight_trace_id_map to common headerJames Clark2-19/+1
The trace ID maps will need to be created and stored by the core and Perf code so move the definition up to the common header. Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@arm.com> Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-12-james.clark@linaro.org
2024-08-20coresight: Clarify comments around the PID of the sink ownerJames Clark2-4/+6
"Process being monitored" and "pid of the process to monitor" imply that this would be the same PID if there were two sessions targeting the same process. But this is actually the PID of the process that did the Perf event open call, rather than the target of the session. So update the comments to make this clearer. Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@arm.com> Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-11-james.clark@linaro.org
2024-08-20coresight: Remove unused ETM Perf stubsJames Clark1-18/+0
This file is never included anywhere if CONFIG_CORESIGHT is not set so they are unused and aren't currently compile tested with any config so remove them. Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@arm.com> Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240722101202.26915-10-james.clark@linaro.org
2024-08-20coresight: tmc: sg: Do not leak sg_tableSuzuki K Poulose1-1/+1
Running perf with cs_etm on Juno triggers the following kmemleak warning ! :~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff8806b6d720 (size 96): comm "perf", pid 562, jiffies 4297810960 hex dump (first 32 bytes): 38 d8 13 07 88 ff ff ff 00 d0 9e 85 c0 ff ff ff 8............... 00 10 00 88 c0 ff ff ff 00 f0 ff f7 ff 00 00 00 ................ backtrace (crc 1dbf6e00): [<ffffffc08107381c>] kmemleak_alloc+0xbc/0xd8 [<ffffffc0802f9798>] kmalloc_trace_noprof+0x220/0x2e8 [<ffffffc07bb71948>] tmc_alloc_sg_table+0x48/0x208 [coresight_tmc] [<ffffffc07bb71cbc>] tmc_etr_alloc_sg_buf+0xac/0x240 [coresight_tmc] [<ffffffc07bb72538>] tmc_alloc_etr_buf.constprop.0+0x1f0/0x260 [coresight_tmc] [<ffffffc07bb7280c>] alloc_etr_buf.constprop.0.isra.0+0x74/0xa8 [coresight_tmc] [<ffffffc07bb72950>] tmc_alloc_etr_buffer+0x110/0x260 [coresight_tmc] [<ffffffc07bb38afc>] etm_setup_aux+0x204/0x3b0 [coresight] [<ffffffc08025837c>] rb_alloc_aux+0x20c/0x318 [<ffffffc08024dd84>] perf_mmap+0x2e4/0x7a0 [<ffffffc0802cceb0>] mmap_region+0x3b0/0xa08 [<ffffffc0802cd8a8>] do_mmap+0x3a0/0x500 [<ffffffc080295328>] vm_mmap_pgoff+0x100/0x1d0 [<ffffffc0802cadf8>] ksys_mmap_pgoff+0xb8/0x110 [<ffffffc080020688>] __arm64_sys_mmap+0x38/0x58 [<ffffffc080028fc0>] invoke_syscall.constprop.0+0x58/0x100 This due to the fact that we do not free the "sg_table" itself while freeing up the SG table and data pages. Fix this by freeing the sg_table in tmc_free_sg_table(). Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework") Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20240702132846.1677261-1-suzuki.poulose@arm.com
2024-08-19Coresight: Set correct cs_mode for dummy source to fix disable issueJie Gan1-0/+4
The coresight_disable_source_sysfs function should verify the mode of the coresight device before disabling the source. However, the mode for the dummy source device is always set to CS_MODE_DISABLED, resulting in the check consistently failing. As a result, dummy source cannot be properly disabled. Configure CS_MODE_SYSFS/CS_MODE_PERF during the enablement. Configure CS_MODE_DISABLED during the disablement. Fixes: 9d3ba0b6c056 ("Coresight: Add coresight dummy driver") Signed-off-by: Jie Gan <quic_jiegan@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240812042844.2890115-1-quic_jiegan@quicinc.com
2024-08-19Coresight: Set correct cs_mode for TPDM to fix disable issueJie Gan1-0/+6
The coresight_disable_source_sysfs function should verify the mode of the coresight device before disabling the source. However, the mode for the TPDM device is always set to CS_MODE_DISABLED, resulting in the check consistently failing. As a result, TPDM cannot be properly disabled. Configure CS_MODE_SYSFS/CS_MODE_PERF during the enablement. Configure CS_MODE_DISABLED during the disablement. Fixes: b3c71626a933 ("Coresight: Add coresight TPDM source driver") Signed-off-by: Jie Gan <quic_jiegan@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240812043043.2890694-1-quic_jiegan@quicinc.com
2024-08-19coresight: cti: use device_* to iterate over device child nodesJavier Carrasco1-7/+3
Drop the manual access to the fwnode of the device to iterate over its child nodes. `device_for_each_child_node` macro provides direct access to the child nodes, and given that they are only required within the loop, the scoped variant of the macro can be used. Use the `device_for_each_child_node_scoped` macro to iterate over the direct child nodes of the device. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240808-device_child_node_access-v2-1-fc757cc76650@gmail.com
2024-07-25Merge tag 'driver-core-6.11-rc1' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
2024-07-03intel_th: msu-sink: add missing MODULE_DESCRIPTION()Jeff Johnson1-0/+1
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwtracing/intel_th/intel_th_msu_sink.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240530-md-intel_th_msu_sink-v1-1-ae796336e7b9@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-03driver core: have match() callback in struct bus_type take a const *Greg Kroah-Hartman2-3/+3
In the match() callback, the struct device_driver * should not be changed, so change the function callback to be a const *. This is one step of many towards making the driver core safe to have struct device_driver in read-only memory. Because the match() callback is in all busses, all busses are modified to handle this properly. This does entail switching some container_of() calls to container_of_const() to properly handle the constant *. For some busses, like PCI and USB and HV, the const * is cast away in the match callback as those busses do want to modify those structures at this point in time (they have a local lock in the driver structure.) That will have to be changed in the future if they wish to have their struct device * in read-only-memory. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Alex Elder <elder@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-01hwtracing: use for_each_endpoint_of_node()Kuninori Morimoto1-2/+2
We already have for_each_endpoint_of_node(), don't use of_graph_get_next_endpoint() directly. Replace it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/878qyl970c.wl-kuninori.morimoto.gx@renesas.com
2024-06-21coresight: constify the struct device_type usageRicardo B. Marliere2-2/+2
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the coresight_dev_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240219-device_cleanup-coresight-v1-1-4a8a0b816183@marliere.net Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2024-06-10coresight: tmc: Remove duplicated include in coresight-tmc-core.cYang Li1-1/+0
The header files linux/acpi.h is included twice in coresight-tmc-core.c, so one inclusion of each can be removed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8937 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240506011121.39179-1-yang.lee@linux.alibaba.com
2024-06-07coresight: Fix ref leak when of_coresight_parse_endpoint() failsJames Clark1-1/+3
of_graph_get_next_endpoint() releases the reference to the previous endpoint on each iteration, but when parsing fails the loop exits early meaning the last reference is never dropped. Fix it by dropping the refcount in the exit condition. Fixes: d375b356e687 ("coresight: Fix support for sparsely populated ports") Signed-off-by: James Clark <james.clark@arm.com> Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240529133626.90080-1-james.clark@arm.com
2024-05-22Merge tag 'char-misc-6.10-rc1' of ↵Linus Torvalds27-233/+910
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits) misc: ntsync: mark driver as "broken" to prevent from building spmi: pmic-arb: Add multi bus support spmi: pmic-arb: Register controller for bus instead of arbiter spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Make the APID init a version operation spmi: pmic-arb: Fix some compile warnings about members not being described dt-bindings: spmi: Deprecate qcom,bus-id dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe() spmi: hisi-spmi-controller: Do not override device identifier dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references spmi: make spmi_bus_type const extcon: adc-jack: Document missing struct members extcon: realtek: Remove unused of_gpio.h extcon: usbc-cros-ec: Convert to platform remove callback returning void extcon: usb-gpio: Convert to platform remove callback returning void extcon: max77843: Convert to platform remove callback returning void extcon: max3355: Convert to platform remove callback returning void extcon: intel-mrfld: Convert to platform remove callback returning void ...
2024-05-20Merge tag 'mm-nonmm-stable-2024-05-19-11-56' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-mm updates from Andrew Morton: "Mainly singleton patches, documented in their respective changelogs. Notable series include: - Some maintenance and performance work for ocfs2 in Heming Zhao's series "improve write IO performance when fragmentation is high". - Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes exposed by fstests". - kfifo header rework from Andy Shevchenko in the series "kfifo: Clean up kfifo.h". - GDB script fixes from Florian Rommel in the series "scripts/gdb: Fixes for $lx_current and $lx_per_cpu". - After much discussion, a coding-style update from Barry Song explaining one reason why inline functions are preferred over macros. The series is "codingstyle: avoid unused parameters for a function-like macro"" * tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits) fs/proc: fix softlockup in __read_vmcore nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON() scripts: checkpatch: check unused parameters for function-like macro Documentation: coding-style: ask function-like macros to evaluate parameters nilfs2: use __field_struct() for a bitwise field selftests/kcmp: remove unused open mode nilfs2: remove calls to folio_set_error() and folio_clear_error() kernel/watchdog_perf.c: tidy up kerneldoc watchdog: allow nmi watchdog to use raw perf event watchdog: handle comma separated nmi_watchdog command line nilfs2: make superblock data array index computation sparse friendly squashfs: remove calls to set the folio error flag squashfs: convert squashfs_symlink_read_folio to use folio APIs scripts/gdb: fix detection of current CPU in KGDB scripts/gdb: make get_thread_info accept pointers scripts/gdb: fix parameter handling in $lx_per_cpu scripts/gdb: fix failing KGDB detection during probe kfifo: don't use "proxy" headers media: stih-cec: add missing io.h media: rc: add missing io.h ...
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
generated by cgit v1.2.3 (git 2.39.0) at 2026-04-30 08:02:28 +0300