| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
This detects and enables the scatter gather capability (SG) on ACPI based
Soc-400 TMC ETR devices via a new property called 'arm-armhc97c-sg-enable'.
The updated ACPI spec can be found below, which contains this new property.
https://developer.arm.com/documentation/den0067/latest/
This preserves current handling for the property 'arm,scatter-gather' both
on ACPI and DT based platforms i.e the presence of the property is checked
instead of the value.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240404072934.940760-1-anshuman.khandual@arm.com
|
|
Patch series "Memory allocation profiling", v6.
Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.
Example output:
root@moria-kvm:~# sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Usage:
kconfig options:
- CONFIG_MEM_ALLOC_PROFILING
- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
- CONFIG_MEM_ALLOC_PROFILING_DEBUG
adds warnings for allocations that weren't accounted because of a
missing annotation
sysctl:
/proc/sys/vm/mem_profiling
Runtime info:
/proc/allocinfo
Notes:
[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y
Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:
kmalloc pgalloc
(1 baseline) 6.764s 16.902s
(2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%)
(3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%)
(4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%)
(5 memcg) 13.388s (+97.94%) 48.460s (+186.71%)
(6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%)
(7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%)
Memory overhead:
Kernel size:
text data bss dec diff
(1) 26515311 18890222 17018880 62424413
(2) 26524728 19423818 16740352 62688898 264485
(3) 26524724 19423818 16740352 62688894 264481
(4) 26524728 19423818 16740352 62688898 264485
(5) 26541782 18964374 16957440 62463596 39183
Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags: 192 kB
PageExts: 262144 kB (256MB)
SlabExts: 9876 kB (9.6MB)
PcpuExts: 512 kB (0.5MB)
Total overhead is 0.2% of total memory.
Benchmarks:
Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
baseline disabled profiling enabled profiling
avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023)
stdev 0.0137 0.0188 0.0077
hackbench -l 10000
baseline disabled profiling enabled profiling
avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859)
stdev 0.0933 0.0286 0.0489
stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/
[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/
This patch (of 37):
The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.
[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 3d83d4d4904a ("coresight: tpiu: Move ACPI support from AMBA driver to platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/ad5e0d3ec081444a5ad04a7be277dde3afcb696b.1713858615.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 70750e257aab ("coresight: tmc: Move ACPI support from AMBA driver to platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/3cf26d85a8d45f0efb07e07f3307a1b435ebf61e.1713858615.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 057256aaacc8 ("coresight: stm: Move ACPI support from AMBA driver to platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/3fefa60744fc68c9c4b40aeb69e34cda22582c4b.1713858615.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 965edae4e6a2 ("coresight: debug: Move ACPI support from AMBA driver to platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/fb3d7db82a2490ace41c51b16ad17ef61549e2f6.1713858615.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 23567323857d ("coresight: catu: Move ACPI support from AMBA driver to platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/16a7123efa7d97ae62a02ccbf9b39d146b066860.1713858615.git.u.kleine-koenig@pengutronix.de
|
|
./drivers/hwtracing/coresight/coresight-stm.c: linux/acpi.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8871
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240424023605.90489-1-jiapeng.chong@linux.alibaba.com
|
|
Resource selector pair 0 is always implemented and reserved. We must not
touch it, even during save/restore for CPU Idle. Rest of the driver is
well behaved. Fix the offending ones.
Reported-by: Yabin Cui <yabinc@google.com>
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20240412142702.2882478-5-suzuki.poulose@arm.com
|
|
ETM4x implements TRCQCLTR only when the Q elements are supported
and the Q element filtering is supported (TRCIDR0.QFILT). Access
to the register otherwise could be fatal. Fix this by tracking the
availability, like the others.
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-4-suzuki.poulose@arm.com
|
|
ETM4x doesn't support Data trace on A class CPUs. As such do not access the
Data trace control registers during CPU idle. This could cause problems for
ETE. While at it, remove all references to the Data trace control registers.
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-3-suzuki.poulose@arm.com
|
|
When we restore the register state for ETM4x, while coming back
from CPU idle, we hardcode IOMEM access. This is wrong and could
blow up for an ETM with system instructions access (and for ETE).
Fixes: f5bd523690d2 ("coresight: etm4x: Convert all register accesses")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-2-suzuki.poulose@arm.com
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-11-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-5-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-12-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-9-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-8-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-6-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-2-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-13-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-10-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-7-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-4-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-3-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add support for the cpu debug devices in a new platform driver, which can
then be used on ACPI based platforms. This change would now allow runtime
power management for ACPI based systems. The driver would try to enable
the APB clock if available. But first this renames and then refactors
debug_probe() and debug_remove(), making sure they can be used both for
platform and AMBA drivers.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-12-anshuman.khandual@arm.com
|
|
Add support for the stm devices in the platform driver, which can then be
used on ACPI based platforms. This change would now allow runtime power
management for ACPI based systems. The driver would try to enable the APB
clock if available. But first this renames and then refactors stm_probe()
and stm_remove(), making sure it can be used both for platform and AMBA
drivers. Also this moves pm_runtime_put() from stm_probe() to the callers.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-11-anshuman.khandual@arm.com
|
|
Add support for the tmc devices in the platform driver, which can then be
used on ACPI based platforms. This change would now allow runtime power
management for ACPI based systems. The driver would try to enable the APB
clock if available. But first this renames and then refactors tmc_probe()
and tmc_remove(), making sure it can be used both for platform and AMBA
drivers. This also moves pm_runtime_put() from tmc_probe() to the callers.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-10-anshuman.khandual@arm.com
|
|
Add support for the tpiu device in the platform driver, which can then be
used on ACPI based platforms. This change would now allow runtime power
management for ACPI based systems. The driver would try to enable the APB
clock if available. But first this renames and then refactors tpiu_probe()
and tpiu_remove(), making sure it can be used both for platform and AMBA
drivers. This also moves pm_runtime_put() from tpiu_probe() to the callers.
While here, this also sorts the included headers in alphabetic order.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-9-anshuman.khandual@arm.com
|
|
Add support for the catu devices in a new platform driver, which can then
be used on ACPI based platforms. This change would now allow runtime power
management for ACPI based systems. The driver would try to enable the APB
clock if available. But first this renames and then refactors catu_probe()
and catu_remove(), making sure it can be used both for platform and AMBA
drivers. This also moves pm_runtime_put() from catu_probe() to the callers.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-8-anshuman.khandual@arm.com
|
|
Add support for the dynamic funnel device in the platform driver, which can
then be used on ACPI based platforms. This change would allow runtime power
management for ACPI based systems.
The driver would try to enable the APB clock if available. Also, rename the
code to reflect the fact that it now handles both static and dynamic
funnels. But first this refactors funnel_probe() making sure it can be used
both for platform and AMBA drivers, by moving the pm_runtime_put() to the
callers.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-7-anshuman.khandual@arm.com
|
|
Add support for the dynamic replicator device in the platform driver, which
can then be used on ACPI based platforms. This change would now allow
runtime power management for replicator devices on ACPI based systems.
The driver would try to enable the APB clock if available. Also, rename the
code to reflect the fact that it now handles both static and dynamic
replicators. But first this refactors replicator_probe() making sure it can
be used both for platform and AMBA drivers, by moving the pm_runtime_put()
to the callers.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-6-anshuman.khandual@arm.com
|
|
This adds two different helpers i.e coresight_init_driver()/remove_driver()
enabling coresight devices to register or remove AMBA and platform drivers.
This changes replicator and funnel devices to use above new helpers.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-5-anshuman.khandual@arm.com
|
|
This extracts device properties from AMBA pid based table lookup. But first
this modifies tmc_etr_setup_caps() to accept csdev access.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-4-anshuman.khandual@arm.com
|
|
Instead of using AMBA private data field, extract the device name from AMBA
pid based table lookup using new coresight_get_uci_data_from_amba() helper.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-3-anshuman.khandual@arm.com
|
|
There is an unbalanced pm_runtime_enable() in etm4_probe_platform_dev()
when etm4_probe() fails. This problem can be observed via the coresight
etm4 module's (load -> unload -> load) sequence when etm4_probe() fails
in etm4_probe_platform_dev().
[ 63.379943] coresight-etm4x 7040000.etm: Unbalanced pm_runtime_enable!
[ 63.393630] coresight-etm4x 7140000.etm: Unbalanced pm_runtime_enable!
[ 63.407455] coresight-etm4x 7240000.etm: Unbalanced pm_runtime_enable!
[ 63.420983] coresight-etm4x 7340000.etm: Unbalanced pm_runtime_enable!
[ 63.420999] coresight-etm4x 7440000.etm: Unbalanced pm_runtime_enable!
[ 63.441209] coresight-etm4x 7540000.etm: Unbalanced pm_runtime_enable!
[ 63.454689] coresight-etm4x 7640000.etm: Unbalanced pm_runtime_enable!
[ 63.474982] coresight-etm4x 7740000.etm: Unbalanced pm_runtime_enable!
This fixes the above problem - with an explicit pm_runtime_disable() call
when etm4_probe() fails during etm4_probe_platform_dev().
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-2-anshuman.khandual@arm.com
|
|
Change qcom,dsb-element-size to qcom,dsb-elem-bits as the unit is bit.
When use "-bits" suffix, the type of the property is u32 from
property-units.yaml, so use fwnode_property_read_u32 to read the
property.
Fixes: 57e7235aa1d1 ("coresight-tpda: Add DSB dataset support")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20240218094322.22470-3-quic_jinlmao@quicinc.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
{CMB/DSB}_PATT_ENABLE_TS attributes do not use an "idx" field and never sets it.
But, since have full blown warning enabled in coresight, it triggerst the warning
on some of the newer compiler versions:
drivers/hwtracing/coresight/coresight-tpdm.c:1055:2: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
1055 | DSB_PATT_ENABLE_TS,
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:184:3: note: expanded from macro 'DSB_PATT_ENABLE_TS'
184 | tpdm_patt_enable_ts(enable_ts, \
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:156:5: note: expanded from macro 'tpdm_patt_enable_ts'
156 | } \
| ^
drivers/hwtracing/coresight/coresight-tpdm.c:1109:2: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
1109 | CMB_PATT_ENABLE_TS,
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:208:3: note: expanded from macro 'CMB_PATT_ENABLE_TS'
208 | tpdm_patt_enable_ts(enable_ts, \
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:156:5: note: expanded from macro 'tpdm_patt_enable_ts'
156 | } \
| ^
Make sure we initialise this.
Fixes: dc6ce57e2aa0 ("coresight-tpdm: Add timestamp control register support for the CMB")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
skip_power_up is used in etm4_init_arch_data when set lpoverride. So
need to set the value of it before calling using it.
Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240131105423.9519-1-quic_jinlmao@quicinc.com
|
|
Add the nodes for CMB subunit MSR(mux select register) support.
CMB MSRs(mux select registers) is to separate mux, arbitration,
interleaving,data packing control from stream filtering control.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-11-git-send-email-quic_taozha@quicinc.com
|
|
CMB_TIER register is CMB subunit timestamp insertion enable register.
Bit 0 is PATT_TSENAB bit. Set this bit to 1 to request a timestamp
following a CMB interface pattern match. Bit 1 is XTRIG_TSENAB bit.
Set this bit to 1 to request a timestamp following a CMB CTI timestamp
request. Bit 2 is TS_ALL bit. Set this bit to 1 to request timestamp
for all packets.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-9-git-send-email-quic_taozha@quicinc.com
|
|
Timestamps are requested if the monitor’s CMB data set unit input
data matches the value in the Monitor CMB timestamp pattern and mask
registers (M_CMB_TPR and M_CMB_TPMR) when CMB timestamp enabled
via the timestamp insertion enable register bit(CMB_TIER.PATT_TSENAB).
The pattern match trigger output is achieved via setting values into
the CMB trigger pattern and mask registers (CMB_XPR and CMB_XPMR).
After configuring a pattern through these registers, the TPDM subunit
will assert an output trigger every time it receives new input data
that matches the configured pattern value. Values in a given bit
number of the mask register correspond to the same bit number in
the corresponding pattern register.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-8-git-send-email-quic_taozha@quicinc.com
|
|
TPDM CMB subunits support two forms of CMB data set element creation:
continuous and trace-on-change collection mode. Continuous change
creates CMB data set elements on every CMBCLK edge. Trace-on-change
creates CMB data set elements only when a new data set element differs
in value from the previous element in a CMB data set. Set CMB_CR.MODE
to 0 for continuous CMB collection mode. Set CMB_CR.MODE to 1 for
trace-on-change CMB collection mode.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-7-git-send-email-quic_taozha@quicinc.com
|
|
Read the CMB element size from the device tree. Set the register
bit that controls the CMB element size of the corresponding port.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-6-git-send-email-quic_taozha@quicinc.com
|
|
CMB (continuous multi-bit) is one of TPDM's dataset type. CMB subunit
can be enabled for data collection by writing 1 to the first bit of
CMB_CR register. This change is to add enable/disable function for
CMB dataset by writing CMB_CR register.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-5-git-send-email-quic_taozha@quicinc.com
|
|
Since the function tpdm_has_dsb_dataset will be called by TPDA
driver in subsequent patches, it is moved to the header file.
And move this judgement form the function __tpdm_{enable/disable}
to the beginning of the function tpdm_{enable/disable}_dsb.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-3-git-send-email-quic_taozha@quicinc.com
|
|
Replace spin lock/unlock to avoid forgetting to unlock when the
function exits. And refine methods for handling various conditions.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-2-git-send-email-quic_taozha@quicinc.com
|
|
Now that mode is in struct coresight_device, sets can be wrapped. This
also allows us to add a sanity check that there have been no concurrent
modifications of mode. Currently all usages of local_set() were inside
the device's spin locks so this new warning shouldn't be triggered.
coresight_take_mode() could maybe have been used in place of adding
the warning, but there may be use cases which set the mode to the same
mode which are valid but would fail in coresight_take_mode() because
it requires the device to only be in the disabled state.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-13-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device accesses can be wrapped.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-12-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
