summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2023-08-11hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabledGilles Buloz1-1/+1
commit 54685abe660a59402344d5045ce08c43c6a5ac42 upstream. Because of hex value 0x46 used instead of decimal 46, the temp6 (PECI1) temperature is always declared visible and then displayed even if disabled in the chip Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/DU0PR10MB62526435ADBC6A85243B90E08002A@DU0PR10MB6252.EURPRD10.PROD.OUTLOOK.COM Fixes: fcdc5739dce03 ("hwmon: (nct7802) add temperature sensor type attribute") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09hwmon: (scmi) Remove redundant pointer checkNathan Chancellor1-1/+1
commit a31796c30e423f58d266df30a9bbf321fc071b30 upstream. Clang warns when the address of a pointer is used in a boolean context as it will always return true. drivers/hwmon/scmi-hwmon.c:59:24: warning: address of array 'sensor->name' will always evaluate to 'true' [-Wpointer-bool-conversion] if (sensor && sensor->name) ~~ ~~~~~~~~^~~~ 1 warning generated. Remove the check as it isn't doing anything currently; if validation of the contents of the data structure was intended by the original author (since this line has been present from the first version of this driver), it can be added in a follow-up patch. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCsFrank Crawford1-1/+3
[ Upstream commit 968b66ffeb7956acc72836a7797aeb7b2444ec51 ] Fix voltage scaling for chips that have 10.9mV ADCs, where scaling was not performed. Fixes: ead8080351c9 ("hwmon: (it87) Add support for IT8732F") Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230318080543.1226700-2-frank@crawford.emu.id.au [groeck: Update subject and description to focus on bug fix] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race ↵Zheng Wang1-0/+1
condition [ Upstream commit cb090e64cf25602b9adaf32d5dfc9c8bec493cd1 ] In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work. Then it will be started. If we remove the driver which will call xgene_hwmon_remove to clean up, there may be unfinished work. The possible sequence is as follows: Fix it by finishing the work before cleanup in xgene_hwmon_remove. CPU0 CPU1 |xgene_hwmon_evt_work xgene_hwmon_remove | kfifo_free(&ctx->async_msg_fifo);| | |kfifo_out_spinlocked |//use &ctx->async_msg_fifo Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adt7475) Fix masking of hysteresis registersTony O'Brien1-2/+2
[ Upstream commit 48e8186870d9d0902e712d601ccb7098cb220688 ] The wrong bits are masked in the hysteresis register; indices 0 and 2 should zero bits [7:4] and preserve bits [3:0], and index 1 should zero bits [3:0] and preserve bits [7:4]. Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adt7475) Display smoothing attributes in correct orderTony O'Brien1-2/+2
[ Upstream commit 5f8d1e3b6f9b5971f9c06d5846ce00c49e3a8d94 ] Throughout the ADT7475 driver, attributes relating to the temperature sensors are displayed in the order Remote 1, Local, Remote 2. Make temp_st_show() conform to this expectation so that values set by temp_st_store() can be displayed using the correct attribute. Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11hwmon: (mlxreg-fan) Return zero speed for broken fanVadim Pasternak1-0/+6
[ Upstream commit a1ffd3c46267ee5c807acd780e15df9bb692223f ] Currently for broken fan driver returns value calculated based on error code (0xFF) in related fan speed register. Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with misleading value. Add check for fan fault prior return speed value and return zero if fault is detected. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11hwmon: (ltc2945) Handle error case in ltc2945_value_storeJonathan Cormier1-0/+2
[ Upstream commit 178b01eccfb0b8149682f61388400bd3d903dddc ] ltc2945_val_to_reg errors were not being handled which would have resulted in register being set to 0 (clamped) instead of being left alone. Fixes: 6700ce035f83 ("hwmon: Driver for Linear Technologies LTC2945") Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()Yang Yingliang1-1/+4
[ Upstream commit 7dec14537c5906b8bf40fd6fd6d9c3850f8df11d ] As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (coretemp) Check for null before removing sysfs attrsPhil Auld1-0/+4
[ Upstream commit a89ff5f5cc64b9fe7a992cf56988fd36f56ca82a ] If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. Signed-off-by: Phil Auld <pauld@redhat.com> Cc: linux-hwmon@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() failsGaosheng Cui1-0/+1
[ Upstream commit e2a87785aab0dac190ac89be6a9ba955e2c634f2 ] Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free(). Fixes: 57c7c3a0fdea ("hwmon: IBM power meter driver") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221117034423.2935739-1-cuigaosheng1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (i5500_temp) fix missing pci_disable_device()Yang Yingliang1-1/+1
[ Upstream commit 3b7f98f237528c496ea0b689bace0e35eec3e060 ] pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release(). Fixes: ada072816be1 ("hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221112125606.3751430-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03hwmon/coretemp: Handle large core ID valueZhang Rui1-15/+41
commit 7108b80a542b9d65e44b36d64a700a83658c0b73 upstream. The coretemp driver supports up to a hard-coded limit of 128 cores. Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large. Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Len Brown <len.brown@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15hwmon: (gpio-fan) Fix array out of bounds accessArmin Wolf1-0/+3
[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ] The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end trace 8ded4c918658445b ]--- Fix this by checking the cooling state and return an error if it exceeds the maximum cooling state. Tested on a Raspberry Pi 3. Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-07hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() failsYang Yingliang1-4/+8
[ Upstream commit d0e51022a025ca5350fafb8e413a6fe5d4baf833 ] If platform_device_add() fails, it no need to call platform_device_del(), split platform_device_unregister() into platform_device_del/put(), so platform_device_put() can be called separately. Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-25Revert "hwmon: Make chip parameter for with_info API mandatory"Greg Kroah-Hartman1-7/+9
This reverts commit 1ec0bc72f5dab3ab367ae5230cf6f212d805a225 which is commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 upstream. It should not have been applied to the stable trees. Link: https://lore.kernel.org/r/20220622154454.GA1864037@roeck-us.net Reported-by: Julian Haller <julian.haller@philips.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14hwmon: Make chip parameter for with_info API mandatoryGuenter Roeck1-9/+7
[ Upstream commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 ] Various attempts were made recently to "convert" the old hwmon_device_register() API to devm_hwmon_device_register_with_info() by just changing the function name without actually converting the driver. Prevent this from happening by making the 'chip' parameter of devm_hwmon_device_register_with_info() mandatory. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (f71882fg) Fix negative temperatureJi-Ze Hong (Peter Hong)1-2/+3
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ] All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement. In show_temp() temp = data->temp[nr] * 1000; When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to: temp = ((s8)data->temp[nr]) * 1000; Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (ltq-cputemp) restrict it to SOC_XWAYRandy Dunlap1-1/+1
[ Upstream commit 151d6dcbed836270c6c240932da66f147950cbdb ] Building with SENSORS_LTQ_CPUTEMP=y with SOC_FALCON=y causes build errors since FALCON does not support the same features as XWAY. Change this symbol to depend on SOC_XWAY since that provides the necessary interfaces. Repairs these build errors: ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_enable': ../drivers/hwmon/ltq-cputemp.c:23:9: error: implicit declaration of function 'ltq_cgu_w32'; did you mean 'ltq_ebu_w32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c:23:21: error: implicit declaration of function 'ltq_cgu_r32'; did you mean 'ltq_ebu_r32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_probe': ../drivers/hwmon/ltq-cputemp.c:92:31: error: 'SOC_TYPE_VR9_2' undeclared (first use in this function) 92 | if (ltq_soc_type() != SOC_TYPE_VR9_2) Fixes: 7074d0a92758 ("hwmon: (ltq-cputemp) add cpu temp sensor driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Florian Eckert <fe@dev.tdt.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20220509234740.26841-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (tmp401) Add OF device ID tableCamel Guo1-0/+11
[ Upstream commit 3481551f035725fdc46885425eac3ef9b58ae7b7 ] This driver doesn't have of_match_table. This makes the kernel module tmp401.ko lack alias patterns (e.g: of:N*T*Cti,tmp411) to match DT node of the supported devices hence this kernel module will not be automatically loaded. After adding of_match_table to this driver, the folllowing alias will be added into tmp401.ko. $ modinfo drivers/hwmon/tmp401.ko filename: drivers/hwmon/tmp401.ko ...... author: Hans de Goede <hdegoede@redhat.com> alias: of:N*T*Cti,tmp435C* alias: of:N*T*Cti,tmp435 alias: of:N*T*Cti,tmp432C* alias: of:N*T*Cti,tmp432 alias: of:N*T*Cti,tmp431C* alias: of:N*T*Cti,tmp431 alias: of:N*T*Cti,tmp411C* alias: of:N*T*Cti,tmp411 alias: of:N*T*Cti,tmp401C* alias: of:N*T*Cti,tmp401 ...... Fixes: af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") Signed-off-by: Camel Guo <camel.guo@axis.com> Link: https://lore.kernel.org/r/20220503114333.456476-1-camel.guo@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12hwmon: (adt7470) Fix warning on module removalArmin Wolf1-2/+2
commit 7b2666ce445c700b8dcee994da44ddcf050a0842 upstream. When removing the adt7470 module, a warning might be printed: do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa006052b>] adt7470_update_thread+0x7b/0x130 [adt7470] This happens because adt7470_update_thread() can leave the kthread in TASK_INTERRUPTIBLE state when the kthread is being stopped before the call of set_current_state(). Since kthread_exit() might sleep in exit_signals(), the warning is printed. Fix that by using schedule_timeout_interruptible() and removing the call of set_current_state(). This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop() which might cause the kthread to exit. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Fixes: 93cacfd41f82 (hwmon: (adt7470) Allow faster removal) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220407101312.13331-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15hwmon: (pmbus) Add Vin unit off handlingBrandon Wyman2-1/+2
[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ] If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNINGArmin Wolf1-1/+1
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ] If the watchdog was already enabled by the BIOS after booting, the watchdog infrastructure needs to regularly send keepalives to prevent a unexpected reset. WDOG_ACTIVE only serves as an status indicator for userspace, we want to use WDOG_HW_RUNNING instead. Since my Fujitsu Esprimo P720 does not support the watchdog, this change is compile-tested only. Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15hwmon: (pmbus) Add mutex to regulator opsPatrick Rudolph1-3/+13
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ] On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16hwmon: (dell-smm) Speed up setting of fan speedArmin Wolf1-4/+8
commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream. When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(), causing an unnecessary SMM call since from the two users of this function, only i8k_ioctl_unlocked() needs to know the new fan status while dell_smm_write() ignores the new fan status. Since SMM calls can be very slow while also making error reporting difficult for dell_smm_write(), remove the function call from i8k_set_fan() and call it separately in i8k_ioctl_unlocked(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08hwmon: (lm90) Reduce maximum conversion rate for G781Guenter Roeck1-1/+1
[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ] According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29hwmon: (lm90) Do not report 'busy' status bit as alarmGuenter Roeck1-1/+2
commit cdc5287acad9ede121924a9c9313544b80d15842 upstream. Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29hwmon: (lm90) Fix usage of CONFIG2 register in detect functionGuenter Roeck1-3/+2
[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22hwmon: (dell-smm) Fix warning on /proc/i8k creation errorArmin Wolf1-2/+5
commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream. The removal function is called regardless of whether /proc/i8k was created successfully or not, the later causing a WARN() on module removal. Fix that by only registering the removal function if /proc/i8k was created successfully. Tested on a Inspiron 3505. Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeffZev Weiss1-1/+1
[ Upstream commit b7931a7b0e0df4d2a25fedd895ad32c746b77bc1 ] Maintaining this manually is error prone (there are currently only five chips supported, not six); gcc can do it for us automatically. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Fixes: 666c14906b49 ("hwmon: (pmbus/lm25066) Drop support for LM25063") Link: https://lore.kernel.org/r/20210928092242.30036-5-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26hwmon: Fix possible memleak in __hwmon_device_register()Yang Yingliang1-2/+4
[ Upstream commit ada61aa0b1184a8fda1a89a340c7d6cc4e59aee5 ] I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888102740438 (size 8): comm "27", pid 859, jiffies 4295031351 (age 143.992s) hex dump (first 8 bytes): 68 77 6d 6f 6e 30 00 00 hwmon0.. backtrace: [<00000000544b5996>] __kmalloc_track_caller+0x1a6/0x300 [<00000000df0d62b9>] kvasprintf+0xad/0x140 [<00000000d3d2a3da>] kvasprintf_const+0x62/0x190 [<000000005f8f0f29>] kobject_set_name_vargs+0x56/0x140 [<00000000b739e4b9>] dev_set_name+0xb0/0xe0 [<0000000095b69c25>] __hwmon_device_register+0xf19/0x1e50 [hwmon] [<00000000a7e65b52>] hwmon_device_register_with_info+0xcb/0x110 [hwmon] [<000000006f181e86>] devm_hwmon_device_register_with_info+0x85/0x100 [hwmon] [<0000000081bdc567>] tmp421_probe+0x2d2/0x465 [tmp421] [<00000000502cc3f8>] i2c_device_probe+0x4e1/0xbb0 [<00000000f90bda3b>] really_probe+0x285/0xc30 [<000000007eac7b77>] __driver_probe_device+0x35f/0x4f0 [<000000004953d43d>] driver_probe_device+0x4f/0x140 [<000000002ada2d41>] __device_attach_driver+0x24c/0x330 [<00000000b3977977>] bus_for_each_drv+0x15d/0x1e0 [<000000005bf2a8e3>] __device_attach+0x267/0x410 When device_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used instead of calling hwmon_dev_release() to give up the device reference, then the name will be freed in kobject_cleanup(). Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: bab2243ce189 ("hwmon: Introduce hwmon_device_register_with_groups") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211012112758.2681084-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26hwmon: (pmbus/lm25066) Add offset coefficientsZev Weiss1-0/+23
commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream. With the exception of the lm5066i, all the devices handled by this driver had been missing their offset ('b') coefficients for direct format readings. Cc: stable@vger.kernel.org Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056") Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients") Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06hwmon: (tmp421) fix rounding for negative valuesPaul Fertser1-16/+8
[ Upstream commit 724e8af85854c4d3401313b6dd7d79cf792d8990 ] Old code produces -24999 for 0b1110011100000000 input in standard format due to always rounding up rather than "away from zero". Use the common macro for division, unify and simplify the conversion code along the way. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06hwmon: (tmp421) report /PVLD condition as faultPaul Fertser1-6/+3
[ Upstream commit 540effa7f283d25bcc13c0940d808002fee340b8 ] For both local and remote sensors all the supported ICs can report an "undervoltage lockout" condition which means the conversion wasn't properly performed due to insufficient power supply voltage and so the measurement results can't be trusted. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06hwmon: (tmp421) Replace S_<PERMS> with octal valuesGuenter Roeck1-2/+2
[ Upstream commit b626eb22f9e17fcca4e262a8274e93690068557f ] Replace S_<PERMS> with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced ↵Vadim Pasternak1-3/+9
from sysfs [ Upstream commit e6fab7af6ba1bc77c78713a83876f60ca7a4a064 ] Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20hwmon: (max31790) Fix fan speed reporting for fan7..12Guenter Roeck1-1/+1
[ Upstream commit cbbf244f0515af3472084f22b6213121b4a63835 ] Fans 7..12 do not have their own set of configuration registers. So far the code ignored that and read beyond the end of the configuration register range to get the tachometer period. This resulted in more or less random fan speed values for those fans. The datasheet is quite vague when it comes to defining the tachometer period for fans 7..12. Experiments confirm that the period is the same for both fans associated with a given set of configuration registers. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Fixes: 195a4b4298a7 ("hwmon: Driver for Maxim MAX31790") Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20hwmon: (max31722) Remove non-standard ACPI device IDsGuenter Roeck1-9/+0
[ Upstream commit 97387c2f06bcfd79d04a848d35517b32ee6dca7c ] Valid Maxim Integrated ACPI device IDs would start with MXIM, not with MAX1. On top of that, ACPI device IDs reflecting chip names are almost always invalid. Remove the invalid ACPI IDs. Fixes: 04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30hwmon: (scpi-hwmon) shows the negative temperature properlyRiwen Lu1-0/+9
[ Upstream commit 78d13552346289bad4a9bf8eabb5eec5e5a321a5 ] The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Tested-by: Xin Chen <chenxin@kylinos.cn> Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"Greg Kroah-Hartman1-9/+2
commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream. This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, it was determined that this commit is not needed at all so just revert it. Also, the call to lm80_init_client() was not properly handled, so if error handling is needed in the lm80_probe() function, then it should be done properly, not half-baked like the commit being reverted here did. Cc: Kangjie Lu <kjlu@umn.edu> Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe") Cc: stable <stable@vger.kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17hwmon: (lm90) Fix max6658 sporadic wrong temperature readingBoyang Yu1-4/+38
commit 62456189f3292c62f87aef363f204886dc1d4b48 upstream. max6658 may report unrealistically high temperature during the driver initialization, for which, its overtemp alarm pin also gets asserted. For certain devices implementing overtemp protection based on that pin, it may further trigger a reset to the device. By reproducing the problem, the wrong reading is found to be coincident with changing the conversion rate. To mitigate this issue, set the stop bit before changing the conversion rate and unset it thereafter. After such change, the wrong reading is not reproduced. Apply this change only to the max6657 kind for now, controlled by flag LM90_PAUSE_ON_CONFIG. Signed-off-by: Boyang Yu <byu@arista.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29hwmon: (pmbus/max34440) Fix status register reads for MAX344{51,60,61}Guenter Roeck1-3/+0
[ Upstream commit 6c094b31ea2ad773824362ba0fccb88d36f8d32d ] Starting with MAX34451, the chips of this series support STATUS_IOUT and STATUS_TEMPERATURE commands, and no longer report over-current and over-temperature status with STATUS_MFR_SPECIFIC. Fixes: 7a001dbab4ade ("hwmon: (pmbus/max34440) Add support for MAX34451.") Fixes: 50115ac9b6f35 ("hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461") Reported-by: Steve Foreman <foremans@google.com> Cc: Steve Foreman <foremans@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09hwmon: (applesmc) check status earlier.Tom Rix1-15/+16
[ Upstream commit cecf7560f00a8419396a2ed0f6e5d245ccb4feac ] clang static analysis reports this representative problem applesmc.c:758:10: warning: 1st function call argument is an uninitialized value left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buffer is filled by the earlier call ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ... This problem is reported because a goto skips the status check. Other similar problems use data from applesmc_read_key before checking the status. So move the checks to before the use. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@bitmath.org> Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()Cristian Marussi1-1/+1
[ Upstream commit 3ce17cd2b94907f6d91b81b32848044b84c97606 ] SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function: drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9 Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29hwmon: (adm1275) Make sure we are reading enough data for different chipsChu Lin1-2/+8
[ Upstream commit 6d1d41c075a1a54ba03370e268171fec20e06563 ] Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74 Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it. Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte Testing: Binding adm1272 to the driver. The change is only tested on adm1272. Signed-off-by: Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflowEvgeny Novikov1-0/+2
[ Upstream commit bc4071aafcf4d0535ee423b69167696d6c03207d ] aspeed_create_fan() reads a pwm_port value using of_property_read_u32(). If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be a buffer overflow in aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes the potential buffer overflow. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22hwmon: (emc2103) fix unable to change fan pwm1_enable attributeVishwas M1-1/+1
commit 14b0e83dc4f1e52b94acaeb85a18fd7fdd46d2dc upstream. This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by: Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()Misono Tomohiro1-1/+3
[ Upstream commit 8b97f9922211c44a739c5cbd9502ecbb9f17f6d1 ] Although it rarely happens, we should call free_capabilities() if error happens after read_capabilities() to free allocated strings. Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-09hwmon: (max6697) Make sure the OVERT mask is set correctlyChu Lin1-3/+4
[ Upstream commit 016983d138cbe99a5c0aaae0103ee88f5300beb3 ] Per the datasheet for max6697, OVERT mask and ALERT mask are different. For example, the 7th bit of OVERT is the local channel but for alert mask, the 6th bit is the local channel. Therefore, we can't apply the same mask for both registers. In addition to that, the max6697 driver is supposed to be compatibale with different models. I manually went over all the listed chips and made sure all chip types have the same layout. Testing; mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT. I used iotool to read the reg value back to verify. I only tested this change on max6581. Reference: https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf https://datasheets.maximintegrated.com/en/ds/MAX6699.pdf Signed-off-by: Chu Lin <linchuyuan@google.com> Fixes: 5372d2d71c46e ("hwmon: Driver for Maxim MAX6697 and compatibles") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22hwmon/k10temp, x86/amd_nb: Consolidate shared device IDsWoods, Brian1-8/+1
[ Upstream commit dedf7dce4cec5c0abe69f4fa6938d5100398220b ] Consolidate shared PCI_DEVICE_IDs that were scattered through k10temp and amd_nb, and move them into pci_ids. Signed-off-by: Brian Woods <brian.woods@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Clemens Ladisch <clemens@ladisch.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Jean Delvare <jdelvare@suse.com> CC: Jia Zhang <qianyue.zj@alibaba-inc.com> CC: <linux-hwmon@vger.kernel.org> CC: <linux-pci@vger.kernel.org> CC: Pu Wen <puwen@hygon.cn> CC: Thomas Gleixner <tglx@linutronix.de> CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181106200754.60722-2-brian.woods@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-14 15:45:57 +0300