summaryrefslogtreecommitdiff
path: root/drivers/hwmon/ina2xx.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16hwmon: (ina2xx) Fix build warningGuenter Roeck1-1/+1
The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/ina2xx.c:510:34: warning: ‘ina2xx_of_match’ defined but not used Mark ina2xx_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-17hwmon: (ina2xx) Auto-convert to use SENSOR_DEVICE_ATTR_{RO, RW, WO}Guenter Roeck1-22/+14
Conversion was done done using the coccinelle script at https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocci Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-14hwmon: (ina2xx) Fix current value calculationNicolin Chen1-1/+1
The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-13hwmon (ina2xx) Fix NULL id pointer in probe()Nicolin Chen1-2/+2
When using DT configurations, the id pointer might turn out to be NULL. Then the driver encounters NULL pointer access: Unable to handle kernel read from unreadable memory at vaddr 00000018 [...] PC is at ina2xx_probe+0x114/0x200 LR is at ina2xx_probe+0x10c/0x200 [...] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b The reason is that i2c core returns the id pointer by matching id_table with client->name, while the client->name is actually using the name from the first string in the DT compatible list, not the best one. So i2c core would fail to match the id_table if the best matched compatible string isn't the first one, and then would return a NULL id pointer. This probably should be fixed in i2c core. But it doesn't hurt to make the driver robust. So this patch fixes it by using the "chip" that's added to unify both DT and non-DT configurations. Additionally, since id pointer could be null, so as id->name: ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm) ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm) So this patch also fixes NULL name pointer, using client->name to play safe and to align with hwmon->name. Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table") Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-27hwmon: (ina2xx) fix sysfs shunt resistor read accessLothar Felten1-2/+11
fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-15hwmon: (ina2xx) Fix access to uninitialized mutexMarek Szyprowski1-2/+1
Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-03hwmon: (ina2xx) Make calibration register value fixedMaciej Purski1-37/+50
Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (ina2xx) Add OF device ID tableJavier Martinez Canillas1-1/+34
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-10-31hwmon: (ina2xx) remove no longer used variable 'kind'Marc Titinger1-4/+2
Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-10-29hwmon: (ina2xx) give precedence to DT over checking for platform data.Marc Titinger1-13/+12
when checking for the value of the shunt resistor. Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-10-29hwmon: (ina2xx) convert driver to using regmapMarc Titinger1-128/+86
Any sysfs "show" read access from the client app will result in reading all registers (8 with ina226). Depending on the host this can limit the best achievable read rate. This changeset allows for individual register accesses through regmap. Tested with BeagleBone Black (Baylibre-ACME) and ina226. Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-17hwmon: (ina2xx) replace ina226_avg_bits() with find_closest()Bartosz Golaszewski1-14/+3
Use find_closest() to locate the closest average in ina226_avg_tab. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-26hwmon: (ina2xx) Add ina231 compatible stringKevin Hilman1-0/+1
Add support for "ina231" as compatible string, and update Documentation and Kconfig accordingly. Tested with the Exynos5422-based odroid-xu3 board which has on-board INA231 sensors. Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) use DIV_ROUND_CLOSEST() to avoid rounding errorsBartosz Golaszewski1-3/+7
Use DIV_ROUND_CLOSEST() when dealing with the calibration values to make the calculations less error prone. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) remove an unnecessary dev_get_drvdata() result checkBartosz Golaszewski1-3/+0
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) implement update_interval attribute for ina226Bartosz Golaszewski1-6/+158
This attribute allows to configure the update interval of ina226. Although the bus and shunt voltage conversion times remain hardcoded to 1.1 ms, we can now modify said interval by changing the averaging rate. While we're at it - add an additional variable to ina2xx_data, which holds the current configuration settings - this way we'll be able to restore the configuration in case of an unexpected chip reset. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) make shunt resistance configurable at run-timeBartosz Golaszewski1-2/+46
The shunt resistance can only be set via platform_data or device tree. This isn't suitable for devices in which the shunt resistance can change/isn't known at boot-time. Add a sysfs attribute that allows to read and set the shunt resistance. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) don't accept shunt values greater than the calibration factorBartosz Golaszewski1-1/+2
Shunt resistance values greater than the chip's calibration factor make no sense since the actual value written to the register equals: <calibration factor> / <shunt> Bail-out from ina2xx_probe() if the configured value is greater than the calibration factor. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) remove a stray new lineBartosz Golaszewski1-1/+0
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-26hwmon: (ina2xx) reinitialize the chip in case it's been resetBartosz Golaszewski1-37/+91
Chips from the ina family don't like to be uninitialized. In case the power is cut-off and restored again the calibration register will be reset to 0 and both the power and current registers will remain at 0. Check the calibration register in ina2xx_update_device() and reinitialize the chip if needed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-01hwmon: (ina2xx) bail-out from ina2xx_probe() in case of configuration errorsBartosz Golaszewski1-6/+20
The return value of i2c_smbus_write_word_swapped() isn't checked in ina2xx_probe(). This leads to devices being registered even if they cannot be physically detected (e.g. device is not powered-up at boot-time). Even after restoring power to such device, it is left unconfigured as the configuration has never been actually written to the register. Error out in case of write errors in probe and notify the user. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [Guenter Roeck: Fixed multi-line comment style] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-12hwmon: (ina2xx) Cast to s16 on shunt and current regsFabio Baltieri1-3/+4
All devices supported by ina2xx are bidirectional and report the measured shunt voltage and power values as a signed 16 bit, but the current driver implementation caches all registers as u16, leading to an incorrect sign extension when reporting to userspace in ina2xx_get_value(). This patch fixes the problem by casting the signed registers to s16. Tested on an INA219. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-14hwmon: (ina2xx) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck1-43/+21
Also introduce dev variable in probe function to simplify access to client->dev, and use new macro ATTRIBUTE_GROUPS to declare attribute groups. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-09-10hwmon: (ina2xx) Remove casting the return value which is a void pointerJingoo Han1-2/+1
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-12hwmon: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27hwmon: (ina2xx) Add device tree support to pass the shunt resistorTang Yuantian1-0/+5
Adding another way that is device tree to pass the shunt resistor value to driver except for platform data. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> [Guenter Roeck: Added missing of.h include] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-08hwmon: (ina2xx) Fix 'Avoid unnecessary line continuations' checkpatch warningGuenter Roeck1-8/+8
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-05hwmon: (ina2xx) use module_i2c_driver to simplify the codeWei Yongjun1-12/+1
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-10hwmon: Add missing inclusions of <linux/jiffies.h>Jean Delvare1-0/+1
Many hwmon drivers use jiffies but omit the inclusion of the header file. Fix that, and also fix one driver which was including the header file but didn't need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Luca Tettamanti <kronos.it@gmail.com> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz>
2012-09-24hwmon: (ina2xx) Add support for INA220 and INA230Guenter Roeck1-0/+10
INA220 is register compatible to INA219, and INA230 is register compatible to INA226, so all we need to do is to add name aliases for those two chips. Cc: Lothar Felten <l-felten@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org>
2012-09-24hwmon: (ina2xx) Use structure array to distinguish chip typesGuenter Roeck1-103/+56
Replace per-device initialization and per-device calculation code with per-device configuration data, which is then used to configure the chip and perform calculations based on that data. This patch reduces code size by more than 400 bytes on x86_64. Cc: Lothar Felten <l-felten@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-09-12hwmon: (ina2xx) Fix word size register read and write operationsGuenter Roeck1-21/+9
The driver uses be16_to_cpu and cpu_to_be16 to convert data in SMBus word operations from chip to host byte order. However, the data passed from and to the SMBus word API functions is in host byte order, not in chip byte order. Conversion should therefore use swab16 instead of be16 to change the byte order. Replace driver internal word conversion functions with SMBus API functions to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.5+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-22hwmon: INA219 and INA226 supportFelten, Lothar1-0/+368
Add support for the Texas Instruments INA219 and INA226 power monitors. Signed-off-by: Lothar Felten <l-felten@ti.com> [guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data; select PGA=8 for INA219] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>