| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic
driver (Jinjie Ruan)
- HID selftests fixes and improvements (Benjamin Tissoires)
- probe error handling path fixes in hid-nvidia-shield driver
(Christophe JAILLET)
- cleanup of LED handling in hid-nintendo (Martino Fontana)
- big cleanup of logitech-hidpp probe code (Hans de Goede)
- Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin)
- firmware detection improvement for Lenovo cptkbd (Mikhail
Khvainitski)
- IRQ shutdown and workqueue initialization fixes for hid-cp2112 driver
(Danny Kaehn)
- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)
- other assorted device-ID additions and quirks
* tag 'for-linus-2023110101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W
HID: logitech-hidpp: Stop IO before calling hid_connect()
HID: logitech-hidpp: Drop HIDPP_QUIRK_UNIFYING
HID: logitech-hidpp: Drop delayed_work_cb()
HID: logitech-hidpp: Fix connect event race
HID: logitech-hidpp: Remove unused connected param from *_connect()
HID: logitech-hidpp: Remove connected check for non-unifying devices
HID: logitech-hidpp: Add hidpp_non_unifying_init() helper
HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check
HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init()
HID: logitech-hidpp: Remove wtp_get_config() call from probe()
HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event()
HID: logitech-hidpp: Revert "Don't restart communication if not necessary"
HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only
HID: rmi: remove #ifdef CONFIG_PM
HID: multitouch: remove #ifdef CONFIG_PM
HID: usbhid: remove #ifdef CONFIG_PM
HID: core: remove #ifdef CONFIG_PM from hid_driver
hid: lenovo: Resend all settings on reset_resume for compact keyboards
HID: uclogic: Fix a work->entry not empty bug in __queue_work()
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
- fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic
driver (Jinjie Ruan)
|
|
- probe error handling path fixes in hid-nvidia-shield driver (Christophe JAILLET)
|
|
- cleanup of LED handling in hid-nintendo (Martino Fontana)
|
|
- big cleanup of logitech-hidpp probe code (Hans de Goede)
|
|
- Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin)
- firmware detection improvement for Lenovo cptkbd (Mikhail Khvainitski)
|
|
- IRQ shutdown and workqueue initialization fixes for hid-cp2112
driver (Danny Kaehn)
|
|
- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely.
Reported-by: Robert Ayrapetyan <robert.ayrapetyan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
hid_connect() will call hid_pidff_init() which does
hid_device_io_start() leading to an "io already started" warning.
To fix this call hid_device_io_stop() before calling hid_connect(),
stopping IO means that connect events may be lost while hid_connect()
runs, re-enable IO and move the hidpp_connect_event() work queuing
after the hid_connect().
Note re-enabling IO is also necessary for the g920_get_config()
call later during hidpp_probe().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025190151.302376-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
HIDPP unifying is only checked once in probe() and it is also
set by probe() itself.
Drop the quirk and replace its one check by the condition which is
used to set the quirk in the first place.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-13-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Drop delayed_work_cb() instead make hidpp_connect_event() the workqueue
function itself.
Besides resulting in a small cleanup this will hopefully also make
it clearer that going forward hidpp_connect_event() should only
be run from a workqueue and not be directly invoked.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-12-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
There is a connect event race in hidpp_probe() in these 2 lines:
connected = hidpp_root_get_protocol_version(hidpp) == 0;
atomic_set(&hidpp->connected, connected);
Specifically the following can happen:
1. This line from hidpp_probe() is executed:
connected = hidpp_root_get_protocol_version(hidpp) == 0;
and sets connected to false;
2. A connect-event packet is received and does:
atomic_set(&hidpp->connected, true);
3. The next line from hidpp_probe() is executed:
atomic_set(&hidpp->connected, connected);
and sets the atomic_t back to 0 again.
4. hidpp_connect_event() runs and sees the connected device
as disconnected because of this.
To fix this make hidpp_connect_event() query the connection status
of the device itself instead of having it rely on possibly stale
data cached in struct hidpp_device.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-11-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Remove the unused connected function parameter from wtp_connect(),
m560_send_config_command() and k400_connect().
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-10-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Non-unifying devices (USB, Bluetooth) are always connected during
probe(), remove the unnecessary connected check.
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-9-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Turn hidpp_overwrite_name() into a hidpp_non_unifying_init() helper
which takes care of setting both the name and the serial for non
unifying devices.
This mirrors the hidpp_unifying_init() helper for unifying devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-8-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Move the hidpp_overwrite_name() call to before the connect check, this
puts it at the same place in the probe() order as hidpp_serial_init()
which seems more logical. This should not make a difference since this
is in the non-unifying path and only unifying devices can be probed
in non-connected state.
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
Doing this before the connect check requires dropping the protocol
version check since protocol_major is not set yet now. Instead
this relies on hidpp_root_get_feature(HIDPP_PAGE_GET_DEVICE_NAME_TYPE)
failing on older devices, just like how hidpp_get_serial() relies on
hidpp_root_get_feature(HIDPP_PAGE_DEVICE_INFORMATION) failing on older
devices. So this again makes the code more consistent.
Also stop printing an error on failure now, since with the proto
version check gone failures are expected to happen on older devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-7-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The data retrieved by g920_get_config() is only used by hidpp_ff_init().
Now that the hw is kept open till the end of probe() the g920_get_config()
call can be moved to just before hidpp_ff_init() to have all
the HIDPP_QUIRK_CLASS_G920 together in a single place.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-6-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
For WTP devices which start disconnected (paired with the unifying
receiver, but not connected atm) hidpp_connect_event() takes care
of calling wtp_get_config() when the device later connects.
There is no need to have a separate code path for WTP devices which
are connected at probe() time, these can use the same code-path since
probe() will queue hidpp_connect_event() for those at probe time.
Drop the unnecessary wtp_get_config() call from probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-5-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
hidpp_connect_event()
Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.
Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 0da0a63b7cba ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Commit 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).
This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.
Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.
Commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.
But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.
The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.
Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Restarting IO causes 2 problems:
1. Some devices do not like IO being restarted this was addressed in
commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary"), but that change has issues of its own and needs to
be reverted.
2. Restarting IO and specifically calling hid_device_io_stop() causes
received packets to be missed, which may cause connect-events to
get missed.
Restarting IO was introduced in commit 91cf9a98ae41 ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.
But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.
Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.
Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-4-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-3-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-2-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The USB Compact Keyboard variant requires a reset_resume function to
restore keyboard configuration after a suspend in some situations. Move
configuration normally done on probe to lenovo_features_set_cptkbd(), then
recycle this for use on reset_resume.
Without, the keyboard and driver would end up in an inconsistent state,
breaking middle-button scrolling amongst other problems, and twiddling
sysfs values wouldn't help as the middle-button mode won't be set until
the driver is reloaded.
Tested on a USB and Bluetooth Thinkpad Compact Keyboard.
CC: stable@vger.kernel.org
Fixes: 94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/20231002150914.22101-1-martink@posteo.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch
kernel and then the below work->entry not empty bug occurs.
In hid_test_uclogic_exec_event_hook_test(), the filter->work is not
initialized to be added to p.event_hooks->list, and then the
schedule_work() in uclogic_exec_event_hook() will call __queue_work(),
which check whether the work->entry is empty and cause the below
warning call trace.
So call INIT_WORK() with a fake work to solve the issue. After applying
this patch, the below work->entry not empty bug never occurs.
WARNING: CPU: 0 PID: 2177 at kernel/workqueue.c:1787 __queue_work.part.0+0x780/0xad0
Modules linked in:
CPU: 0 PID: 2177 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__queue_work.part.0+0x780/0xad0
Code: 44 24 20 0f b6 00 84 c0 74 08 3c 03 0f 8e 52 03 00 00 f6 83 00 01 00 00 02 74 6f 4c 89 ef e8 c7 d8 f1 02 f3 90 e9 e5 f8 ff ff <0f> 0b e9 63 fc ff ff 89 e9 49 8d 57 68 4c 89 e6 4c 89 ff 83 c9 02
RSP: 0000:ffff888102bb7ce8 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff888106b8e460 RCX: ffffffff84141cc7
RDX: 1ffff11020d71c8c RSI: 0000000000000004 RDI: ffff8881001d0118
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffffed1020576f92
R10: 0000000000000003 R11: ffff888102bb7980 R12: ffff888106b8e458
R13: ffff888119c38800 R14: 0000000000000000 R15: ffff8881001d0100
FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888119506000 CR3: 0000000005286001 CR4: 0000000000770ef0
DR0: ffffffff8fdd6ce0 DR1: ffffffff8fdd6ce1 DR2: ffffffff8fdd6ce3
DR3: ffffffff8fdd6ce5 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xc9/0x260
? __queue_work.part.0+0x780/0xad0
? report_bug+0x345/0x400
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x40
? asm_exc_invalid_op+0x16/0x20
? _raw_spin_lock+0x87/0xe0
? __queue_work.part.0+0x780/0xad0
? __queue_work.part.0+0x249/0xad0
queue_work_on+0x48/0x50
uclogic_exec_event_hook.isra.0+0xf7/0x160
hid_test_uclogic_exec_event_hook_test+0x2f1/0x5d0
? try_to_wake_up+0x151/0x13e0
? uclogic_exec_event_hook.isra.0+0x160/0x160
? _raw_spin_lock_irqsave+0x8d/0xe0
? __sched_text_end+0xa/0xa
? __sched_text_end+0xa/0xa
? migrate_enable+0x260/0x260
? kunit_try_run_case_cleanup+0xe0/0xe0
kunit_generic_run_threadfn_adapter+0x4a/0x90
? kunit_try_catch_throw+0x80/0x80
kthread+0x2b5/0x380
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20231009064245.3573397-3-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
uclogic_params_ugee_v2_init_event_hooks()
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and
then the below user-memory-access bug occurs.
In hid_test_uclogic_params_cleanup_event_hooks(),it call
uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so
when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata()
will access hdev->dev with hdev=NULL, which will cause below
user-memory-access.
So add a fake_device with quirks member and call hid_set_drvdata()
to assign hdev->dev->driver_data which avoids the null-ptr-def bug
for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying
this patch, the below user-memory-access bug never occurs.
general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f]
CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
? sched_clock_cpu+0x69/0x550
? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70
? load_balance+0x2950/0x2950
? rcu_trc_cmpxchg_need_qs+0x67/0xa0
hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0
? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600
? __switch_to+0x5cf/0xe60
? migrate_enable+0x260/0x260
? __kthread_parkme+0x83/0x150
? kunit_try_run_case_cleanup+0xe0/0xe0
kunit_generic_run_threadfn_adapter+0x4a/0x90
? kunit_try_catch_throw+0x80/0x80
kthread+0x2b5/0x380
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace 0000000000000000 ]---
RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 1 seconds..
Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20231009064245.3573397-2-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).
Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.7
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
* tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: Use device_get_match_data()
iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
dt-bindings: trivial-devices: add silabs,si7005
iio: si7005: Add device tree support
drivers: imu: adis16475.c: Remove scan index from delta channels
dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
iio: resolver: ad2s1210: remove of_match_ptr()
iio: resolver: ad2s1210: remove DRV_NAME macro
iio: resolver: ad2s1210: move out of staging
staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
staging: iio: resolver: ad2s1210: clear faults after soft reset
staging: iio: resolver: ad2s1210: refactor sample toggle
staging: iio: resolver: ad2s1210: remove fault attribute
staging: iio: resolver: ad2s1210: add label attribute support
staging: iio: resolver: ad2s1210: add register/fault support summary
staging: iio: resolver: ad2s1210: implement fault events
iio: event: add optional event label support
staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
...
|
|
hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.
hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.
This opens the following races (note the below code is simplified):
1. Retrieving + printing the protocol (harmless race):
if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}
We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:
[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:
2. Updating the name to the HIDPP name (harmless race):
if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}
3. Initializing the power_supply class for the battery (problematic!):
hidpp_initialize_battery()
{
if (hidpp->battery.ps)
return 0;
probe_battery(); /* Blocks, threads take turns executing this */
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
}
4. Creating delayed input_device (potentially problematic):
if (hidpp->delayed_input)
return;
hidpp->delayed_input = hidpp_allocate_input(hdev);
The really big problem here is 3. Hitting the race leads to the following
sequence:
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
...
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.
Notice how:
1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
devm_kmemdup()
This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
this involves sending a remove uevent to userspace which invokes
power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
now points to freed memory leading to backtraces like this one:
Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel: power_supply_unregister+0x8e/0xa0
Sep 22 20:01:35 eric kernel: release_nodes+0x3d/0xb0
Sep 22 20:01:35 eric kernel: devres_release_group+0xfc/0x130
Sep 22 20:01:35 eric kernel: hid_device_remove+0x56/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: logi_dj_remove+0x9a/0x100 [hid_logitech_dj 5c91534a0ead2b65e04dd799a0437e3b99b21bc4]
Sep 22 20:01:35 eric kernel: hid_device_remove+0x44/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: usbhid_disconnect+0x47/0x60 [usbhid 727dcc1c0b94e6b4418727a468398ac3bca492f3]
Sep 22 20:01:35 eric kernel: usb_unbind_interface+0x90/0x270
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? kobject_put+0xa0/0x1d0
Sep 22 20:01:35 eric kernel: usb_disable_device+0xcd/0x1e0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xde/0x2c0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xc3/0x2c0
Sep 22 20:01:35 eric kernel: hub_event+0xe80/0x1c10
There have been quite a few bug reports (see Link tags) about this crash.
Fix all the TOCTOU issues, including the really bad power-supply related
system crash on USB disconnect, by making probe() use the workqueue for
running hidpp_connect_event() too, so that it can never run more then once.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227221
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2242189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412#c58
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231005182638.3776-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
A recent commit reordered probe so that the interrupt line is now
requested before making sure that the device exists.
This breaks machines like the Lenovo ThinkPad X13s which rely on the
HID driver to probe second-source devices and only register the variant
that is actually populated. Specifically, the interrupt line may now
already be (temporarily) claimed when doing asynchronous probing of the
touchpad:
genirq: Flags mismatch irq 191. 00082008 (hid-over-i2c) vs. 00082008 (hid-over-i2c)
i2c_hid_of 21-0015: Could not register for hid-over-i2c interrupt, irq = 191, ret = -16
i2c_hid_of: probe of 21-0015 failed with error -16
Fix this by restoring the old behaviour of first making sure the device
exists before requesting the interrupt line.
Note that something like this should probably be implemented also for
"panel followers", whose actual probe is currently effectively deferred
until the DRM panel is probed (e.g. by powering down the device after
making sure it exists and only then register it as a follower).
Fixes: 675cd877c952 ("HID: i2c-hid: Rearrange probe() to power things up later")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231002155857.24584-1-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Like various other devices using similar hardware, this model reports a
perpetually empty battery (0-1%).
Join the others and apply HID_BATTERY_QUIRK_IGNORE.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.
So first disable and reenable ACPI GPE bit using acpi_disable_gpe().
Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
usb_free_urb() does the NULL check itself, so there is no need to duplicate
it prior to calling.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When suspending the computer, a Switch Pro Controller connected via USB will
lose its internal status. However, because the USB connection was technically
never lost, when resuming the computer, the driver will attempt to communicate
with the controller as if nothing happened (and fail).
Because of this, the user was forced to manually disconnect the controller
(or to press the sync button on the controller to power it off), so that it
can be re-initialized.
With this patch, the controller will be automatically re-initialized after
resuming from suspend.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233
Signed-off-by: Martino Fontana <tinozzo123@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
handling path
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing calls.
Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
error handling path
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing call. Make sure it is safe to call in the probe error
handling path by preventing the led_classdev from attempting to set the LED
brightness to the off state on unregister.
Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Register the Synaptics device as a special multitouch device with certain
quirks that may improve usability of the touchpad device.
Reported-by: Rain <rain@sunshowers.io>
Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.
Initialize the workqueue within _probe instead.
Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
- Support player LED patterns up to 8 players.
(Note that the behavior still consinsts in increasing the player number
every time a controller is connected, never decreasing it. It should be
as is described in https://bugzilla.kernel.org/show_bug.cgi?id=216225.
However, any implementation here would stop making sense as soon as a
non-Nintendo controller is connected, which is why I'm not bothering.)
- Split part of `joycon_home_led_brightness_set` (which is called by hid)
into `joycon_set_home_led` (which is what actually sets the LEDs), for
consistency with player LEDs.
- `joycon_player_led_brightness_set` won't try it to "determine which
player led this is" anymore: it's already looking at every LED
brightness value.
- Instead of first registering the `led_classdev`, then attempting to set
the LED and unregistering the `led_classdev` if it fails, first attempt
to set the LED, then register the `led_classdev` only if it succeeds
(the class is still filled up in either case).
- If setting the player LEDs fails, still attempt setting the home LED.
(I don't know there's a third party controller where this may actually
happen, but who knows...)
- Use `JC_NUM_LEDS` where appropriate instead of 4.
- Print return codes in more places.
- Use spinlock instead of mutex for `input_num`. Copy its value to a local
variable, so that it can be unlocked immediately.
- `input_num` starts counting from 0
- Less holding of mutexes in general.
Signed-off-by: Martino Fontana <tinozzo123@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Built-in firmware of cptkbd handles scrolling by itself (when middle
button is pressed) but with issues: it does not support horizontal and
hi-res scrolling and upon middle button release it sends middle button
click even if there was a scrolling event. Commit 3cb5ff0220e3 ("HID:
lenovo: Hide middle-button press until release") workarounds last
issue but it's impossible to workaround scrolling-related issues
without firmware modification.
Likely, Dennis Schneider has reverse engineered the firmware and
provided an instruction on how to patch it [1]. However,
aforementioned workaround prevents userspace (libinput) from knowing
exact moment when middle button has been pressed down and performing
"On-Button scrolling". This commit detects correctly-behaving patched
firmware if cursor movement events has been received during middle
button being pressed and stops applying workaround for this device.
Link: https://hohlerde.org/rauch/en/elektronik/projekte/tpkbd-fix/ [1]
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
In order to simplify some error handling paths and avoid code duplication,
introduce thunderstrike_destroy() which undoes thunderstrike_create().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
handling path
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing calls.
Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
error handling path
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing call. Make sure it is safe to call in the probe error
handling path by preventing the led_classdev from attempting to set the LED
brightness to the off state on unregister.
Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Battery information reported by the driver depends on the power supply
subsystem. Select the required subsystem when the HID_NVIDIA_SHIELD Kconfig
option is enabled.
Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
