| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 4d3a2a466b8d68d852a1f3bbf11204b718428dc4 ]
When building for 32-bit platforms, for which 'size_t' is
'unsigned int', there are warnings around using the incorrect format
specifier to print bsize in hid_report_raw_event():
drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
| ~~~
| %zu
2054 | report->id, csize, bsize);
| ^~~~~
drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
| ~~~
| %zu
2076 | report->id, rsize, bsize);
| ^~~~~
Use the proper 'size_t' format specifier, '%zu', to clear up the
warnings.
Cc: stable@vger.kernel.org
Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 206342541fc887ae919774a43942dc883161fece ]
hid_input_report() is used in too many places to have a commit that
doesn't cross subsystem borders. Instead of changing the API, introduce
a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport
layers.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a ]
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 206342541fc8 ("HID: core: introduce hid_safe_input_report()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8df2c1b47ee3cd50fd454f75c7a7e2ae8a6adf72 ]
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them.
Fixes: dc3c78e434690 ("HID: usbhid: Check HID report descriptor contents after device reset")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7253091766ded0fd81fe8d8be9b8b835495b06e8 ]
In order to avoid dereferencing a NULL pointer asus_probe is aborted early
and control of some asus devices is transferred over hid-generic after
erroring out even when such NULL dereference cannot happen: only early
abort when the NULL dereference can happen.
Also make the code shorter and more adherent to coding standards
removing square brackets enclosing single-line if-else statements.
Fixes: d3af6ca9a8c3 ("HID: asus: fix UAF via HID_CLAIMED_INPUT validation")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51d33b42b8ae23da92819d28439fdd5636c45186 ]
Linux kernel coding standars requires functions opening brackets to be in
a newline: move the opening bracket of asus_resume in its own line.
Fixes: 546edbd26cff ("HID: hid-asus: reset the backlight brightness level on resume")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 48d1677779ad6816978ad4a4f7588aec5ec960fe upstream.
Rescaling values close to the max (U16_MAX) temporarily creates values
that exceed the s32 range. This caused value overflow in case when, for
example, a periodic effect phase was higer than 180 degrees. In turn,
rescale function could return values outised of the logical range of the
HID field.
Fix by using 64 bit signed integer to store the value during calculation
but still return only 32 bit integer.
Closes: https://github.com/JacKeTUs/universal-pidff/issues/116
Fixes: 224ee88fe395 ("Input: add force feedback driver for PID devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1654e53349d4e657b331de354313461f401f5063 upstream.
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer".
Fixes: 93a0fc489481 ("HID: hid-appletb-kbd: add support for automatic brightness control while using the touchbar")
Cc: stable@vger.kernel.org
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4db2af929279c799b5653a39eb0795c72baffca4 upstream.
Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in
appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to
both the probe close_hw error path and appletb_kbd_remove(), but the
way it was wired in left the inactivity timer reachable during driver
tear-down via two distinct windows.
Window A -- put_device() before timer_delete_sync():
put_device(&kbd->backlight_dev->dev);
timer_delete_sync(&kbd->inactivity_timer);
The inactivity_timer softirq reads kbd->backlight_dev and calls
backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a
concurrent hid_appletb_bl unbind drops the last devm reference
between these two calls, the backlight_device is freed and the
mutex_lock() touches freed memory.
Window B -- backlight cleanup before hid_hw_stop():
if (kbd->backlight_dev) {
timer_delete_sync(...);
put_device(...);
}
hid_hw_close(hdev);
hid_hw_stop(hdev);
Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run
afterwards, so a late ".event" callback from the HID core (USB URB
completion on real Apple hardware) can arrive after
timer_delete_sync() drained the softirq but before put_device() drops
the reference. That callback reaches reset_inactivity_timer(), which
calls mod_timer() and re-arms the timer. The freshly re-armed timer
can then fire on the about-to-be-freed backlight_device.
Both windows produce the same KASAN slab-use-after-free:
BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0
Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0
Call Trace:
<IRQ>
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
handle_softirqs
Allocated by task N:
devm_backlight_device_register
appletb_bl_probe
Freed by task M:
(concurrent hid_appletb_bl unbind path)
Close both windows at once by reworking the tear-down in
appletb_kbd_remove() and in the probe close_hw error path so that
1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup,
guaranteeing no further .event callback can fire and re-arm the
timer, and
2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync()
runs before put_device(), so the softirq is drained before the
final reference is dropped.
Fixes: 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe")
Cc: stable@vger.kernel.org
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cac61b58a3b6340c52afa06bb15eac033158db2f upstream.
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of
the touch_reports array, up to about 2 KiB for the maximum number of 256
loop iteraions. The data that is read is emitted via evdev if the
DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by
clamping the num_touch_reports value provided by the device to the
maximum size of the touch_reports array.
Fixes: 752038248808 ("HID: playstation: add DualShock4 touchpad support.")
Cc: stable@vger.kernel.org
Reported-by: Xingyu Jin <xingyuj@google.com>
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f95a6cd5ad78ed27a31a20cbd1facff6f10b33d upstream.
Some users reported that upon suspending their keyboard backlight
remained on. Fix this by adding the missing LED_CORE_SUSPENDRESUME flag.
Cc: stable@vger.kernel.org
Fixes: 394ba612f941 ("HID: apple: Add support for magic keyboard backlight on T2 Macs")
Fixes: 9018eacbe623 ("HID: apple: Add support for keyboard backlight on certain T2 Macs.")
Reported-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Tested-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69c02ffde6ed4d535fa4e693a9e572729cad3d0d upstream.
s32ton() shifts by n-1 where n is the field's report_size, a value that
comes directly from a HID device. The HID parser bounds report_size
only to <= 256, so a broken HID device can supply a report descriptor
with a wide field that triggers shift exponents up to 256 on a 32-bit
type when an output report is built via hid_output_field() or
hid_set_field().
Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in
hid_report_raw_event") added the same n > 32 clamp to the function
snto32(), but s32ton() was never given the same fix as I guess syzbot
hadn't figured out how to fuzz a device the same way.
Fix this up by just clamping the max value of n, just like snto32()
does.
Cc: stable <stable@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: linux-input@vger.kernel.org
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1badfc4319224820d5d890f8eab6aa52e4e83339 upstream.
Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event.
Fixes: 73196ebe134d ("HID: alps: add support for Alps T4 Touchpad device")
Cc: stable <stable@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Masaki Ota <masaki.ota@jp.alps.com>
Cc: linux-input@vger.kernel.org
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- handling of new keycodes for contextual AI usages (Akshai Murari)
- fix for UAF in hid-roccat (Benoît Sevens)
- deduplication of error logging in amd_sfh (Maximilian Pezzullo)
- various device-specific quirks and device ID additions (Even Xu, Lode
Willems, Leo Vriska)
* tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Input: add keycodes for contextual AI usages (HUTRR119)
HID: Kysona: Add support for VXE Dragonfly R1 Pro
HID: amd_sfh: don't log error when device discovery fails with -EOPNOTSUPP
HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3
HID: roccat: fix use-after-free in roccat_report_event
HID: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
HID: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
|
|
HUTRR119 introduces new usages for keys intended to invoke AI agents
based on the current context. These are useful with the increasing
number of operating systems with integrated Large Language Models
Add new key definitions for KEY_ACTION_ON_SELECTION,
KEY_CONTEXTUAL_INSERT and KEY_CONTEXTUAL_QUERY
Signed-off-by: Akshai Murari <akshaim@google.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Apparently this same protocol is used by more mice from different brands.
This patch adds support for the VXE Dragonfly R1 Pro.
Tested-by: Dominykas Svetikas <dominykas@svetikas.lt>
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When sensor discovery fails on systems without AMD SFH sensors, the
code already emits a warning via dev_warn() in amd_sfh_hid_client_init().
The subsequent dev_err() in sfh_init_work() for the same -EOPNOTSUPP
return value is redundant and causes unnecessary alarm.
Suppress the dev_err() for -EOPNOTSUPP to avoid confusing users who
have no AMD SFH sensors.
Fixes: 2105e8e00da4 ("HID: amd_sfh: Improve boot time when SFH is available")
Reported-by: Casey Croy <ccroy@bugzilla.kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221099
Signed-off-by: Maximilian Pezzullo <maximilianpezzullo@gmail.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
According to a mailing list report [1], this controller's predecessor
has the same issue. However, it uses the xpad driver instead of HID, so
this quirk wouldn't apply.
[1]: https://lore.kernel.org/linux-input/unufo3$det$1@ciao.gmane.io/
Signed-off-by: leo vriska <leo@60228.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add Nova Lake THC QuickSPI device IDs to support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add Nova Lake THC QuickI2C device IDs to support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- various fixes dealing with (intentionally) broken devices in HID
core, logitech-hidpp and multitouch drivers (Lee Jones)
- fix for OOB in wacom driver (Benoît Sevens)
- fix for potentialy HID-bpf-induced buffer overflow in () (Benjamin
Tissoires)
- various other small fixes and device ID / quirk additions
* tag 'hid-for-linus-2026031701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Check to ensure report responses match the request
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
HID: bpf: prevent buffer overflow in hid_hw_request
selftests/hid: fix compilation when bpf_wq and hid_device are not exported
HID: core: Mitigate potential OOB by removing bogus memset()
HID: intel-thc-hid: Set HID_PHYS with PCI BDF
HID: appletb-kbd: add .resume method in PM
HID: logitech-hidpp: Enable MX Master 4 over bluetooth
HID: input: Add HID_BATTERY_QUIRK_DYNAMIC for Elan touchscreens
HID: input: Drop Asus UX550* touchscreen ignore battery quirks
HID: asus: add xg mobile 2022 external hardware support
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
|
|
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that.
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
right now the returned value is considered to be always valid. However,
when playing with HID-BPF, the return value can be arbitrary big,
because it's the return value of dispatch_hid_bpf_raw_requests(), which
calls the struct_ops and we have no guarantees that the value makes
sense.
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
[bentiss: changed the return value]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Currently HID_PHYS is empty, which means userspace tools (e.g. fwupd)
that depend on it for distinguishing the devices, are unable to do so.
Other drivers like i2c-hid, usbhid, surface-hid, all populate it.
With this change it's set to, for example: HID_PHYS=0000:00:10.0
Each function has just a single HID device, as far as I can tell, so
there is no need to add a suffix.
Tested with fwupd 2.1.1, can avoid https://github.com/fwupd/fwupd/pull/9995
Cc: Even Xu <even.xu@intel.com>
Cc: Xinpeng Sun <xinpeng.sun@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Upon resuming from suspend, the Touch Bar driver was missing a resume
method in order to restore the original mode the Touch Bar was on before
suspending. It is the same as the reset_resume method.
[jkosina@suse.com: rebased on top of the pm_ptr() conversion]
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech MX Master 4 can be connected over bluetooth or through a
Logitech Bolt receiver. This change adds support for non-standard HID
features, such as high resolution scrolling when the mouse is connected
over bluetooth.
Because no Logitech Bolt receiver driver exists yet those features
won't be available when the mouse is connected through the receiver.
Signed-off-by: Adrian Freund <adrian@freund.io>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Elan touchscreens have a HID-battery device for the stylus which is always
there even if there is no stylus.
This is causing upower to report an empty battery for the stylus and some
desktop-environments will show a notification about this, which is quite
annoying.
Because of this the HID-battery is being ignored on all Elan I2c and USB
touchscreens, but this causes there to be no battery reporting for
the stylus at all.
This adds a new HID_BATTERY_QUIRK_DYNAMIC and uses these for the Elan
touchscreens.
This new quirks causes the present value of the battery to start at 0,
which will make userspace ignore it and only sets present to 1 after
receiving a battery input report which only happens when the stylus
gets in range.
Reported-by: ggrundik@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221118
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Drop the Asus UX550* touchscreen ignore battery quirks, there is a blanket
HID_BATTERY_QUIRK_IGNORE for all USB_VENDOR_ID_ELAN USB touchscreens now,
so these are just a duplicate of those.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
XG mobile station 2022 has a different PID than the 2023 model: add it
that model to hid-asus.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few memory leaks (Günther Noack)
- fix potential kernel crashes in cmedia, creative-sb0540 and zydacron
(Greg Kroah-Hartman)
- fix NULL pointer dereference in pidff (Tomasz Pakuła)
- fix battery reporting for Apple Magic Trackpad 2 (Julius Lehmann)
- mcp2221 proper handling of failed read operation (Romain Sioen)
- various device quirks / device ID additions
* tag 'hid-for-linus-2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp2221: cancel last I2C command on read error
HID: asus: add xg mobile 2023 external hardware support
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
HID: multitouch: new class MT_CLS_EGALAX_P80H84
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
HID: pidff: Fix condition effect bit clearing
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
HID: asus: avoid memory leak in asus_report_fixup()
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
HID: apple: avoid memory leak in apple_report_fixup()
HID: Document memory allocation properties of report_fixup()
|
|
When an I2C SMBus read operation fails, the MCP2221 internal state machine
may not reset correctly, causing subsequent transactions to fail.
By adding a short delay and explicitly cancelling the last command,
we ensure the device is ready for the next operation.
Fix an issue where i2cdetect was not able to detect all devices correctly
on the bus.
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
XG mobile stations have the 0x5a endpoint and has to be initialized:
add them to hid-asus.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Uniwill devices have a built in gesture in the touchpad to de- and
reactivate it by double taping the upper left corner. This gesture stops
working when latency is set to high, so this patch keeps the latency on
normal.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
[jkosina@suse.com: change bit from 24 to 25]
[jkosina@suse.com: update shortlog]
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
EPOMAKER TH87 has the very same ID as Apple Aluminum keyboard
(05ac:024f) although it doesn't work as expected in compatible way.
Put three entries to the non-apple keyboards list to exclude this
device: one for BT ("TH87"), one for USB ("HFD Epomaker TH87") and one
for dongle ("2.4G Wireless Receiver").
Link: https://bugzilla.suse.com/show_bug.cgi?id=1258455
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add device IDs of Nova Lake-H and Nova Lake-S into ishtp support list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fixes: f9e82295eec1 ("HID: multitouch: add eGalaxTouch P80H84 support")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Battery reporting does not work for the Apple Magic Trackpad 2 if it is
connected via USB. The current hid descriptor fixup code checks for a
hid descriptor length of exactly 83 bytes. If the hid descriptor is
larger, which is the case for newer apple mice, the fixup is not
applied.
This fix checks for hid descriptor sizes greater/equal 83 bytes which
applies the fixup for newer devices as well.
Signed-off-by: Julius Lehmann <lehmanju@devpi.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As reported by MPDarkGuy on discord, NULL pointer dereferences were
happening because not all the conditional effects bits were cleared.
Properly clear all conditional effect bits from ffbit
Fixes: 7f3d7bc0df4b ("HID: pidff: Better quirk assigment when searching for fields")
Cc: stable@vger.kernel.org # 6.18.x
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at
raw event handle"), we handle the fact that raw event callbacks
can happen even for a HID device that has not been "claimed" causing a
crash if a broken device were attempted to be connected to the system.
Fix up the remaining in-tree HID drivers that forgot to add this same
check to resolve the same issue.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: linux-input@vger.kernel.org
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
