| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit e716edafedad4952fe3a4a273d2e039a84e8681a ]
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f1763f62909ccb6386ac50350fa0abbf5bb16a9 ]
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 239c15116d80f67d32f00acc34575f1a6b699613 ]
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 377f8e788945d45b012ed9cfc35ca56c02e86cd8 ]
XG mobile stations have the 0x5a endpoint and has to be initialized:
add them to hid-asus.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e31b556c0ba21f20c298aa61181b96541140b7b9 ]
When an I2C SMBus read operation fails, the MCP2221 internal state machine
may not reset correctly, causing subsequent transactions to fail.
By adding a short delay and explicitly cancelling the last command,
we ensure the device is ready for the next operation.
Fix an issue where i2cdetect was not able to detect all devices correctly
on the bus.
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91e8c6e601bdc1ccdf886479b6513c01c7e51c2c ]
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f3518d77419255f8b12bb23c8ec22acbeb6bc5b ]
Battery reporting does not work for the Apple Magic Trackpad 2 if it is
connected via USB. The current hid descriptor fixup code checks for a
hid descriptor length of exactly 83 bytes. If the hid descriptor is
larger, which is the case for newer apple mice, the fixup is not
applied.
This fix checks for hid descriptor sizes greater/equal 83 bytes which
applies the fixup for newer devices as well.
Signed-off-by: Julius Lehmann <lehmanju@devpi.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2bad24c17742fc88973d6aea526ce1353f5334a3 ]
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ecfa6f34492c493a9a1dc2900f3edeb01c79946b upstream.
In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at
raw event handle"), we handle the fact that raw event callbacks
can happen even for a HID device that has not been "claimed" causing a
crash if a broken device were attempted to be connected to the system.
Fix up the remaining in-tree HID drivers that forgot to add this same
check to resolve the same issue.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: linux-input@vger.kernel.org
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1547d41f9f19d691c2c9ce4c29f746297baef9e9 ]
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cee8337e1bad168136aecfe6416ecd7d3aa7529a ]
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17abd396548035fbd6179ee1a431bd75d49676a7 ]
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3756a272d2cf356d2203da8474d173257f5f8521 ]
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used.
Fixes: 20eb127906709 ("hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8e5fdf0bd022cd5493a5987ef66f5a24f8352d8 ]
New model in the ELECOM HUGE trackball line that has 8 buttons but the
report descriptor specifies only 5. The HUGE Plus supports connecting via
Bluetooth, 2.4GHz wireless USB dongle, and directly via a USB-C cable.
Each connection type reports a different device id, 01AA for cable,
01AB for USB dongle, and 01AC for Bluetooth.
This patch adds these device IDs and applies the fixups similar to the
other ELECOM devices to get all 8 buttons working for all 3 connection
types.
For reference, the usbhid-dump output:
001:013:001:DESCRIPTOR 1769085639.598405
05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01
29 05 15 00 25 01 75 01 95 05 81 02 75 03 95 01
81 01 05 01 09 30 09 31 16 01 80 26 FF 7F 75 10
95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06
05 0C 0A 38 02 15 81 25 7F 75 08 95 01 81 06 C0
C0 05 0C 09 01 A1 01 85 02 15 01 26 8C 02 19 01
2A 8C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01
85 03 09 82 09 81 09 83 15 00 25 01 19 01 29 03
75 01 95 03 81 02 95 05 81 01 C0 06 01 FF 09 00
A1 01 85 08 09 00 15 00 26 FF 00 75 08 95 07 81
02 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26
FF 00 75 08 95 07 B1 02 C0
Signed-off-by: David Phillips <david@profile.sh>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e4ac86b2ddd36fe501e20ecfcc080e536df1f48 ]
Add support for the for the EXC3188 touchscreen from eGalaxy.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7273acfd0aef106093a8ffa3b4973eb70e5a3799 ]
The SoNiX KN85 keyboard identifies as the "Apple, Inc. Aluminium
Keyboard" and is not recognized as a non-apple keyboard. Adding "SoNiX
KN85 Keyboard" to the list of non-apple keyboards fixes the function
keys.
Signed-off-by: Joey Bednar <linux@joeybednar.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6807641ac94e832988655a1c0e60ccc806b76dc ]
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless().
Fixes: 51151098d7ab ("HID: playstation: add DualSense classic rumble support.")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85a866809333cd2bf8ddac93d9a3e3ba8e4f807d ]
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2497ff38c530b1af0df5130ca9f5ab22c5e92f29 ]
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c06bc3557542307b9658fbd43cc946a14250347b ]
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9143268d259d98e111a649affa061acb8e13c5b ]
When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized,
the input subsystem sets the default value for its absolute axes (e.g.,
ABS_X, ABS_Y) to 0.
However, the hardware's actual neutral/resting state for these joysticks
is 128 (0x80). This creates a mismatch.
When the first HID report arrives from the device, the driver sees the
resting value of 128. The kernel compares this to its initial state of 0
and incorrectly interprets this as a delta (0 -> 128). Consequently, it
generates EV_ABS events for this initial, non-existent movement.
This behavior can fail userspace 'sanity check' tests (e.g., in
Android CTS) that correctly assert no motion events should be generated
from a device that is already at rest.
This patch fixes the issue by explicitly setting the initial value of the
main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80)
in the common ps_gamepad_create() function.
This aligns the kernel's initial state with the hardware's expected
neutral state, ensuring that the first report (at 128) produces no
delta and thus, no spurious event.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56e230723e3a818373bd62331bccb1c6d2b3881b ]
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff3f234ff1dcd6d626a989151db067a1b7f0f215 ]
Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently
fail to release a finger contact. A previous slot remains logically
active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing
gestures to stay latched and resulting in stuck two-finger
scrolling and false right-clicks.
Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit daeed86b686855adda79f13729e0c9b0530990be ]
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f28beb69c51517aec7067dfb2074e7c751542384 upstream.
Some faulty devices (ZWO EFWmini) have a wrong optional HID class
descriptor count compared to the provided length.
Given that we plainly ignore those optional descriptor, we can attempt
to fix the provided number so we do not lock out those devices.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c7fabe4ad9219866c203164a214c474c95b36bf2 ]
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd79 ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ca389a55d8b2d86a817433bf82e0602b68c4d541 upstream.
logi_dj_recv_query_paired_devices() and logi_dj_recv_switch_to_dj_mode()
both have 2 callers which all log an error if the function fails. Move
the error logging to inside these 2 functions to remove the duplicated
error logging in the callers.
While at it also move the logi_dj_recv_send_report() call error handling
in logi_dj_recv_switch_to_dj_mode() to directly after the call. That call
only fails if the report cannot be found and in that case it does nothing,
so the msleep() is not necessary on failures.
Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7953794f741e94d30df9dafaaa4c031c85b891d6 upstream.
HID_GD_Z is mapped to ABS_Z for stylus and pen in hid-input.c. But HID_GD_Z
should be used to report ABS_DISTANCE for stylus and pen as described at:
Documentation/input/event-codes.rst#n226
* ABS_DISTANCE:
- Used to describe the distance of a tool from an interaction surface. This
event should only be emitted while the tool is hovering, meaning in close
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
- BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
proximity and set to 0 when the tool leaves detectable proximity.
BTN_TOOL_<name> signals the type of tool that is currently detected by the
hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
This patch makes the correct mapping. The ABS_DISTANCE is currently not mapped
by any HID usage in hid-generic driver.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aba7963544d47d82cdf36602a6678a093af0299d ]
Currently, hidpp_send_message_sync() retries sending the message when the
device returns a busy error code, specifically HIDPP20_ERROR_BUSY, which
has a different meaning under RAP. This ends up being a problem because
this function is used for both FAP and RAP messages.
This issue is not noticeable on older receivers with unreachable devices
since they return HIDPP_ERROR_RESOURCE_ERROR (0x09), which is not equal to
HIDPP20_ERROR_BUSY (0x08).
However, newer receivers return HIDPP_ERROR_UNKNOWN_DEVICE (0x08) which
happens to equal to HIDPP20_ERROR_BUSY, causing unnecessary retries when
the device is not actually busy.
This is resolved by checking if the error response is FAP or RAP and
picking the respective ERROR_BUSY code.
Fixes: 60165ab774cb ("HID: logitech-hidpp: rework one more time the retries attempts")
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cdcbb8e8d10f656642380ee13516290437b52b36 ]
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which
shares the same report descriptor as the existing device (0x00FB). However,
the driver does not currently recognize this new ID, resulting in only five
buttons being functional.
This patch adds the new device ID so that all six buttons work properly.
Signed-off-by: Naoki Ueki <naoki25519@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 743c81cdc98fd4fef62a89eb70efff994112c2d9 ]
SONiX AK870 PRO keyboard pretends to be an apple keyboard by VID:PID,
rendering function keys not treated properly. Despite being a
SONiX USB DEVICE, it uses a different name, so adding it to the list.
Signed-off-by: April Grimoire <april@aprilg.moe>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 534ca75e8e3b713514b3f2da85dab96831cf5b2a ]
USB Elan devices have the same problem as the I2C ones with a fake
battery device showing up.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reported-by: André Barata <andretiagob@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220722
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6b87bfc2ab5bccb7ad953693c85d9062aef3fdd ]
Testing by the syzbot fuzzer showed that the HID core gets a
shift-out-of-bounds exception when it tries to convert a 32-bit
quantity to a 0-bit quantity. Ideally this should never occur, but
there are buggy devices and some might have a report field with size
set to zero; we shouldn't reject the report or the device just because
of that.
Instead, harden the s32ton() routine so that it returns a reasonable
result instead of crashing when it is called with the number of bits
set to 0 -- the same as what snto32() does.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+b63d677d63bcac06cf90@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/68753a08.050a0220.33d347.0008.GAE@google.com/
Tested-by: syzbot+b63d677d63bcac06cf90@syzkaller.appspotmail.com
Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/613a66cd-4309-4bce-a4f7-2905f9bce0c9@rowland.harvard.edu
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
[ s32ton() was moved by c653ffc28340 ("HID: stop exporting hid_snto32()").
Minor context change fixed. ]
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4d3a13afa8b64dc49293b3eab3e7beac11072c12 ]
Titas reports that the accelerometer sensor on their laptop only
works after a warm boot or unloading/reloading the amd-sfh kernel
module.
Presumably the sensor is in a bad state on cold boot and failing to
start, so explicitly stop it before starting.
Cc: stable@vger.kernel.org
Fixes: 93ce5e0231d79 ("HID: amd_sfh: Implement SFH1.1 functionality")
Reported-by: Titas <novatitas366@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220670
Tested-by: Titas <novatitas366@gmail.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit beab067dbcff642243291fd528355d64c41dc3b2 upstream.
Based on available evidence, the USB ID 4c4a:4155 used by multiple
devices has been attributed to Jieli. The commit 1a8953f4f774
("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen
functionality. Added checks for manufacturer and serial number to
maintain microphone compatibility, enabling both devices to function
properly.
[jkosina@suse.com: edit shortlog]
Fixes: 1a8953f4f774 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY")
Cc: stable@vger.kernel.org
Tested-by: staffan.melin@oscillator.se
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a78eb69d60ce893de48dd75f725ba21309131fc2 ]
In uclogic_params_ugee_v2_init_event_hooks(), the memory allocated for
event_hook is not freed in the next error path. Fix that by freeing it.
Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53f731f5bba0cf03b751ccceb98b82fadc9ccd1e ]
Use a scope-based cleanup helper for the buffer allocated with kmalloc()
in ntrig_report_version() to simplify the cleanup logic and prevent
memory leaks (specifically the !hid_is_usb()-case one).
[jkosina@suse.com: elaborate on the actual existing leak]
Fixes: 185c926283da ("HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()")
Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1141ed52348d3df82d3fd2316128b3fc6203a68c ]
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0be4253bf878d9aaa2b96031ac8683fceeb81480 ]
The Cooler Master Mice Dongle includes a vendor defined HID interface
alongside its mouse interface. Not polling it will cause the mouse to
stop responding to polls on any interface once woken up again after
going into power saving mode.
Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and
the Dongle's PID.
Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d62beb102d6fa9a4e5e874be7fbf47a62fcc4f6 ]
Dell systems utilize an EC-based touchpad emulation when the ACPI
touchpad _DSM is not invoked. This emulation acts as a secondary
master on the I2C bus, designed for scenarios where the I2C touchpad
driver is absent, such as in BIOS menus. Typically, loading the
i2c-hid module triggers the _DSM at initialization, disabling the
EC-based emulation.
However, if the i2c-hid module is missing from the boot kernel
used for hibernation snapshot restoration, the _DSM remains
uncalled, resulting in dual masters on the I2C bus and
subsequent arbitration errors. This issue arises when i2c-hid
resides in the rootfs instead of the kernel or initramfs.
To address this, switch from using the SYSTEM_SLEEP_PM_OPS()
macro to dedicated callbacks, introducing a specific
callback for restoring the S4 image. This callback ensures
the _DSM is invoked.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b595974b4afe0e171dd707da570964ff642742e3 ]
The Asus Z13 folio has a multitouch touchpad that needs to bind
to the hid-multitouch driver in order to work properly. So bind
it to the HID_GROUP_GENERIC group to release the touchpad and
move it to the bottom so that the comment applies to it.
While at it, change the generic KEYBOARD3 name to Z13_FOLIO.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa4daea418ee4215dca5c8636090660c545cb233 ]
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.
Before this fix:
[ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN
After this fix:
[ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 Stylus
Fixes: c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0187c08058da3e7f11b356ac27e0c427d36f33f2 ]
Commit 581c4484769e ("HID: input: map digitizer battery usage") added
handling of battery events for digitizers (typically for batteries
presented in stylii). Digitizers typically report correct battery levels
only when stylus is actively touching the surface, and in other cases
they may report battery level of 0. To avoid confusing consumers of the
battery information the code was added to filer out reports with 0
battery levels.
However there exist other kinds of devices that may legitimately report
0 battery levels. Fix this by filtering out 0-level reports only for
digitizer usages, and continue reporting them for other kinds of devices
(Smart Batteries, etc).
Reported-by: 卢国宏 <luguohong@xiaomi.com>
Fixes: 581c4484769e ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 46f781e0d151844589dc2125c8cce3300546f92a upstream.
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76fd ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b56cc41a3ae7323aa3c6165f93c32e020538b6d2 upstream.
As reported by syzbot, mcp2221_raw_event lacked
validation of incoming I2C read data sizes, risking buffer
overflows in mcp->rxbuf during multi-part transfers.
As highlighted in the DS20005565B spec, p44, we have:
"The number of read-back data bytes to follow in this packet:
from 0 to a maximum of 60 bytes of read-back bytes."
This patch enforces we don't exceed this limit.
Reported-by: syzbot+52c1a7d3e5b361ccd346@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=52c1a7d3e5b361ccd346
Tested-by: syzbot+52c1a7d3e5b361ccd346@syzkaller.appspotmail.com
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Link: https://patch.msgid.link/20250726220931.7126-1-contact@arnaud-lcm.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 831f70a5b93bd2d9e858ced2c12fab5766ede5e7 upstream.
Add support for missing hotkey keycodes affecting Asus PX13 and PX16 families
so userspace can use them.
Signed-off-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2682468671aa0b4d52ae09779b48212a80d71b91 upstream.
When a user requests more than 60 bytes of data the MCP2221 must chunk
the data in chunks up to 60 bytes long (see command/response code 0x40
in the datasheet).
In order to signal that the device has more data the (undocumented) byte
at byte index 2 of the Get I2C Data response uses the value 0x54. This
contrasts with the case for the final data chunk where the value
returned is 0x55 (MCP2221_I2C_READ_COMPL). The fact that 0x55 was not
returned in the response was interpreted by the driver as a failure
meaning that all reads of more than 60 bytes would fail.
Add support for reads that are split over multiple chunks by looking for
the response code indicating that more data is expected and continuing
the read as the code intended. Some timing delays are required to ensure
the chip has time to refill its FIFO as data is read in from the I2C
bus. This timing has been tested in my system when configured for bus
speeds of 50KHz, 100KHz, and 400KHz and operates well.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 67a95c21463d0 ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag]
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02a46753601a24e1673d9c28173121055e8e6cc9 upstream.
Since the initial commit of this driver the I2C bus speed has been
reconfigured for every single transfer. This is despite the fact that we
never change the speed and it is never "lost" by the chip.
Upon investigation we find that what was really happening was that the
setting of the bus speed had the side effect of cancelling a previous
failed command if there was one, thereby freeing the bus. This is the
part that was actually required to keep the bus operational in the face
of failed commands.
Instead of always setting the speed, we now correctly cancel any failed
commands as they are detected. This means we can just set the bus speed
at probe time and remove the previous speed sets on each transfer.
This has the effect of improving performance and reducing the number of
commands required to complete transfers.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 67a95c21463d ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag]
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 185c926283da67a72df20a63a5046b3b4631b7d9 upstream.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
Signed-off-by: Minjong Kim <minbell.kim@samsung.com>
Link: https://patch.msgid.link/20250813-hid-ntrig-page-fault-fix-v2-1-f98581f35106@samsung.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9fc51941d9e7793da969b2c66e6f8213c5b1237f upstream.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
