| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit b5bcb94b0954a026bbd671741fdb00e7141f9c91 ]
If hid_add_device() returns error, it should call hid_destroy_device()
to free hid_dev which is allocated in hid_allocate_device().
Fixes: 74c4fb058083 ("HID: hv_mouse: Properly add the hid device")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f77810f744139572a63e5a85ab6a8c10c2d44fb1 upstream.
When support was added for devices using an explicit 3rd barrel switch,
the logic used by devices emulating this feature was broken. The 'if'
statement / block that was introduced only handles the case where the
button is pressed (i.e. 'barrelswitch' and 'barrelswitch2' are both set)
but not the case where it is released (i.e. one or both being cleared).
This results in a BTN_STYLUS3 "down" event being sent when the button
is pressed, but no "up" event ever being sent afterwards.
This patch restores the previously-used logic for determining button
states in the emulated case so that switches are reported correctly
again.
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/292
Fixes: 6d09085b38e5 ("HID: wacom: Adding Support for new usages")
CC: stable@vger.kernel.org #v5.19+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 79425b297f56bd481c6e97700a9a4e44c7bcfa35 ]
The MadCatz variant of the MMO7 mouse has the ID 0738:1713 and the same
quirks as the Saitek variant.
Signed-off-by: Samuel Bailey <samuel.bailey1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb5f0c855dcfc893ae5ed90e4c646bde9e4498bf ]
Under certain conditions the Magic Trackpad can group 2 reports in a
single packet. The packet is split and the raw event function is
invoked recursively for each part.
However, after processing each part, the BTN_MOUSE status is updated,
sending multiple click events. [1]
Return after processing double reports to avoid this issue.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811 # [1]
Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support")
Reported-by: Nulo <git@nulo.in>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b8a968efab301743fd659b5649c5d7d3e30e63a6 upstream.
Provide initial support for the DualSense Edge controller. The brings
support up to the level of the original DualSense, but won't yet provide
support for new features (e.g. reprogrammable buttons).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-3-roderick.colenbrander@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 182934a1e93b17f4edf71f4fcc8d19b19a6fe67a upstream.
Ensure we don't schedule any new output work on removal and wait
for any existing work to complete. If we don't do this e.g. rumble
work can get queued during deletion and we trigger a kernel crash.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-2-roderick.colenbrander@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 50503e360eeb968a3d00234c9cc4057d774c3e9a ]
Arne Wendt writes:
Cheap clone controllers may (falsely) report as having a user
calibration for the analog sticks in place, but return
wrong/impossible values for the actual calibration data.
In the present case at mine, the controller reports having a
user calibration in place and successfully executes the read
commands. The reported user calibration however is
min = center = max = 0.
This pull request addresses problems of this kind by checking the
provided user calibration-data for plausibility (min < center < max)
and falling back to the default values if implausible.
I'll note that I was experiencing a crash because of this bug when using
the GuliKit KingKong 2 controller. The crash manifests as a divide by
zero error in the kernel logs:
kernel: divide error: 0000 [#1] PREEMPT SMP NOPTI
Link: https://github.com/nicman23/dkms-hid-nintendo/pull/25
Link: https://github.com/DanielOgorchock/linux/issues/36
Co-authored-by: Arne Wendt <arne.wendt@tuhh.de>
Signed-off-by: Johnothan King <johnothanking@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/gvpL2G6VwXGJPvxX5KRiu9pVjvTivgayug_jdKDY6zfuAaAqncP9BkKLosjwUXNlgVVTMfJSKfwPF1K79cKAkwGComyC21vCV3q9B3EXNkE=@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]
roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...
The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...
The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a109d5c45b3d6728b9430716b915afbe16eef27c ]
The Topre REALFORCE R2 firmware incorrectly reports that interface
descriptor number 1, input report descriptor 2's events are array events
rather than variable events. That particular report descriptor is used
to report keypresses when there are more than 6 keys held at a time.
This bug prevents events from this interface from being registered
properly, so only 6 keypresses (from a different interface) can be
registered at once, rather than full n-key rollover.
This commit fixes the bug by setting the correct value in a report_fixup
function.
The original bug report can be found here:
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804
Thanks to Benjamin Tissoires for diagnosing the issue with the report
descriptor.
Signed-off-by: Harry Stern <harry@harrystern.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220911003614.297613-1-harry@harrystern.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68266bdcceec10ea364e62c63732cd6fe5a256a8 ]
Based on num_hid_devices, each sensor device registers to HID. If
"no sensors" then amd_sfh work initialization and scheduling
doesn’t make sense and return ENODEV to stop driver probe.
Hence add a check for num_hid_devices to handle special
case in the situation of "no sensors" for SFH1.1.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 609174edeb758d1e2d713e7ab4e09ea8d45aa4f7 ]
Building with Sparse enabled prints this warning:
warning: incorrect type in assignment (different base types)
expected signed int x
got restricted __le32 [usertype]
Cast the return value of cpu_to_le32() to fix the warning.
Fixes: 08177f4 ("HID: uclogic: merge hid-huion driver in hid-uclogic")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0977fda0587cbc5403651ba169e264aa01e8a026 ]
The Pen (0x02) application usage was changed to Digitalizer (0x01) in
commit f7d8e387d9ae ("HID: uclogic: Switch to Digitizer usage for
styluses"). However, a suffix was not selected for the new usage.
Handle the digitalizer application usage in uclogic_input_configured()
and add the required suffix.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: f7d8e387d9ae ("HID: uclogic: Switch to Digitizer usage for styluses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.
This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.
I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.
Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- NULL pointer dereference fix for Steam driver (Lee Jones)
- memory leak fix for hidraw (Karthik Alapati)
- regression fix for functionality of some UCLogic tables (Benjamin
Tissoires)
- a few new device IDs and device-specific quirks
* tag 'for-linus-2022083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: nintendo: fix rumble worker null pointer deref
HID: intel-ish-hid: ipc: Add Meteor Lake PCI device ID
HID: input: fix uclogic tablets
HID: Add Apple Touchbar on T2 Macs in hid_have_special_driver list
HID: add Lenovo Yoga C630 battery quirk
HID: AMD_SFH: Add a DMI quirk entry for Chromebooks
HID: thrustmaster: Add sparco wheel and fix array length
hid: intel-ish-hid: ishtp: Fix ishtp client sending disordered message
HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo
HID: asus: ROG NKey: Ignore portion of 0x5a report
HID: hidraw: fix memory leak in hidraw_release()
HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report
|
|
We can dereference a null pointer trying to queue work to a destroyed
workqueue.
If the device is disconnected, nintendo_hid_remove is called, in which
the rumble_queue is destroyed. Avoid using that queue to defer rumble
work once the controller state is set to JOYCON_CTLR_STATE_REMOVED.
This eliminates the null pointer dereference.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add device ID of Meteor Lake P into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
commit 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
made the assumption that it was the only one handling tablets and thus
kept an internal state regarding the tool.
Turns out that the uclogic driver has a timer to release the in range
bit, effectively making hid-input ignoring all in range information
after the very first one.
Fix that by having a more rationale approach which consists in forwarding
every event and let the input stack filter out the duplicates.
Reported-by: Stefan Hansson <newbie13xd@gmail.com>
Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The touchbar on Apple T2 Macs has 2 modes, one that shows the function
keys and other that shows the media controls. The user can use the fn
key on his keyboard to switch between the 2 modes.
On Linux, if people were using an external keyboard or mouse, the
touchbar failed to change modes on pressing the fn key with the following
in dmesg :-
[ 10.661445] apple-ib-als 0003:05AC:8262.0001: : USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0
[ 11.830992] apple-ib-touchbar 0003:05AC:8302.0007: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0
[ 12.139407] apple-ib-touchbar 0003:05AC:8102.0008: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0
[ 12.211824] apple-ib-touchbar 0003:05AC:8102.0009: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1
[ 14.219759] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 24.395670] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 34.635791] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 269.579233] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 1 (-110)
Add the USB IDs of the touchbar found in T2 Macs to HID have special
driver list to fix the issue.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Similar to the Surface Go devices, the Elantech touchscreen/digitizer in
the Lenovo Yoga C630 mistakenly reports the battery of the stylus, and
always reports an empty battery.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and
prevent the erroneous low battery warnings.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Google Chromebooks use Chrome OS Embedded Controller Sensor Hub instead
of Sensor Hub Fusion and leaves MP2 uninitialized, which disables all
functionalities, even including the registers necessary for feature
detections.
The behavior was observed with Lenovo ThinkPad C13 Yoga.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add device id for the Sparco R383 Mod wheel.
Fix wheel info array length to match actual wheel count present in the array.
Signed-off-by: Michael Hübner <michaelh.95@t-online.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.
When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......
When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.
Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.
Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......
Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.
The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The double `like' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
On an Asus G513QY, of the 5 bytes in a 0x5a report, only the first byte
is a meaningful keycode. The other bytes are zeroed out or hold garbage
from the last packet sent to the keyboard.
This patch fixes up the report descriptor for this event so that the
general hid code will only process 1 byte for keycodes, avoiding
spurious key events and unmapped Asus vendor usagepage code warnings.
Signed-off-by: Josh Kilmer <srjek2@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Free the buffered reports before deleting the list entry.
BUG: memory leak
unreferenced object 0xffff88810e72f180 (size 32):
comm "softirq", pid 0, jiffies 4294945143 (age 16.080s)
hex dump (first 32 bytes):
64 f3 c6 6a d1 88 07 04 00 00 00 00 00 00 00 00 d..j............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814ac6c3>] kmemdup+0x23/0x50 mm/util.c:128
[<ffffffff8357c1d2>] kmemdup include/linux/fortify-string.h:440 [inline]
[<ffffffff8357c1d2>] hidraw_report_event+0xa2/0x150 drivers/hid/hidraw.c:521
[<ffffffff8356ddad>] hid_report_raw_event+0x27d/0x740 drivers/hid/hid-core.c:1992
[<ffffffff8356e41e>] hid_input_report+0x1ae/0x270 drivers/hid/hid-core.c:2065
[<ffffffff835f0d3f>] hid_irq_in+0x1ff/0x250 drivers/hid/usbhid/hid-core.c:284
[<ffffffff82d3c7f9>] __usb_hcd_giveback_urb+0xf9/0x230 drivers/usb/core/hcd.c:1670
[<ffffffff82d3cc26>] usb_hcd_giveback_urb+0x1b6/0x1d0 drivers/usb/core/hcd.c:1747
[<ffffffff82ef1e14>] dummy_timer+0x8e4/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1988
[<ffffffff812f50a8>] call_timer_fn+0x38/0x200 kernel/time/timer.c:1474
[<ffffffff812f5586>] expire_timers kernel/time/timer.c:1519 [inline]
[<ffffffff812f5586>] __run_timers.part.0+0x316/0x430 kernel/time/timer.c:1790
[<ffffffff812f56e4>] __run_timers kernel/time/timer.c:1768 [inline]
[<ffffffff812f56e4>] run_timer_softirq+0x44/0x90 kernel/time/timer.c:1803
[<ffffffff848000e6>] __do_softirq+0xe6/0x2ea kernel/softirq.c:571
[<ffffffff81246db0>] invoke_softirq kernel/softirq.c:445 [inline]
[<ffffffff81246db0>] __irq_exit_rcu kernel/softirq.c:650 [inline]
[<ffffffff81246db0>] irq_exit_rcu+0xc0/0x110 kernel/softirq.c:662
[<ffffffff84574f02>] sysvec_apic_timer_interrupt+0xa2/0xd0 arch/x86/kernel/apic/apic.c:1106
[<ffffffff84600c8b>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:649
[<ffffffff8458a070>] native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
[<ffffffff8458a070>] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
[<ffffffff8458a070>] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
[<ffffffff8458a070>] acpi_idle_do_entry+0xc0/0xd0 drivers/acpi/processor_idle.c:554
Link: https://syzkaller.appspot.com/bug?id=19a04b43c75ed1092021010419b5e560a8172c4f
Reported-by: syzbot+f59100a0428e6ded9443@syzkaller.appspotmail.com
Signed-off-by: Karthik Alapati <mail@karthek.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3841 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)
- XP-PEN Deco L support (José Expósito)
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
- other small assorted fixes and device ID additions
* tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: amd_sfh: Handle condition of "no sensors"
HID: amd_sfh: Fix implicit declaration error on i386
HID: apple: Add "GANSS" to the non-Apple list
HID: alps: Declare U1_UNICORN_LEGACY support
HID: wacom: Force pen out of prox if no events have been received in a while
HID: nintendo: Add missing array termination
HID: lg-g15: Fix comment typo
HID: amd_sfh: Implement SFH1.1 functionality
HID: amd_sfh: Move interrupt handling to common interface
HID: amd_sfh: Move amd_sfh_work to common interface
HID: amd_sfh: Move global functions to static
HID: amd_sfh: Add remove operation in amd_mp2_ops
HID: amd_sfh: Add PM operations in amd_mp2_ops
HID: amd_sfh: Add descriptor operations in amd_mp2_ops
HID: amd_sfh: Move request_list variable to client data
HID: amd_sfh: Move request_list struct to header file
HID: amd_sfh: Move common macros and structures
HID: amd_sfh: Add NULL check for hid device
HID: core: remove unneeded assignment in hid_process_report()
ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments
...
|
|
- XP-PEN Deco L support (José Expósito)
|
|
|
|
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
|
|
|
|
|
|
- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)
|
|
Add a check for num_hid_devices to handle special case the situation
of "no sensors".
Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add depended header file to fix error on i386 due to implicit
declaration of function ‘writeq’.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
While using the name "SONiX USB DEVICE" for wired mode, my GANSS keyboard
uses "GANSS" for bluetooth mode as well, so adding this to the list.
Signed-off-by: Hilton Chain <hako@ultrarare.space>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
U1_UNICORN_LEGACY id was added to the driver, but was not declared
in the device id table, making it impossible to use.
Fixes: 640e403 ("HID: alps: Add AUI1657 device ID")
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Prox-out events may not be reliably sent by some AES firmware. This can
cause problems for users, particularly due to arbitration logic disabling
touch input while the pen is in prox.
This commit adds a timer which is reset every time a new prox event is
received. When the timer expires we check to see if the pen is still in
prox and force it out if necessary. This is patterend off of the same
solution used by 'hid-letsketch' driver which has a similar problem.
Link: https://github.com/linuxwacom/input-wacom/issues/310
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
joycon_dpad_inputs_jc[] is unterminated. This may result in odd warnings
such as
input: input_set_capability: invalid code 3077588140 for type 1
or in kernel crashes in nintendo_hid_probe(). Terminate the array to fix
the problem.
Fixes: 2af16c1f846bd ("HID: nintendo: add nintendo switch controller driver")
Cc: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The double `with' is duplicated in line 769, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Newer AMD SOCs use SFH1.1 memory access with new PCI-id. Hence add new
sfh1_1 sub directory to implement SFH1.1 functionality by defining new
PCI id, interface functions, descriptor functions and handlers which
invokes sfh1.1.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Interrupt handling can be used in multiple files to support all
AMD SOCs. Hence move interrupt handling to common interface.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
amd_sfh_work can be used in multiple files to support all AMD SOCs.
Hence move amd_sfh_work to common interface.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move global functions declared from header files and make them as static
functions wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add remove operation as part of amd_mp2_ops structure to support all
AMD SOCs and use wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add PM operations as part of amd_mp2_ops structure to support all
AMD SOCs and use wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add dynamic descriptor operations as part of amd_mp2_ops structure to
support all AMD SOCs and use wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
request_list variable can be used in multiple files to support all
AMD SOCs. Hence move request_list variable to client data.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
request_list structure can be used in multiple files to support all
AMD SOCs. Hence move request_list structure to header file.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
