summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2010-07-12HID: Send Report ID when numbered reports are sent over the control endpoint.Alan Ott1-3/+10
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-12HID: Enable HID_QUIRK_MULTI_INPUT for Retro AdaptorPeter Edwards2-0/+3
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by: Peter Edwards <samwise@bagshot-row.org> Acked-by: Paul Qureshi <retro@world3.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: add support for CH Eclipse yokeJonathan Rockway2-0/+2
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by: Jonathan Rockway <jon@jrock.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-21HID: eliminate a double lock in debug codeJulia Lawall1-1/+1
The path around the loop ends with the lock held, so the call to mutex_lock is moved before the beginning of the loop. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @locked@ expression E1; position p; @@ read_lock(E1@p,...); @r exists@ expression x <= locked.E1; expression locked.E1; expression E2; identifier lock; position locked.p,p1,p2; @@ *lock@p1 (E1@p,...); ... when != E1 when != \(x = E2\|&x\) *lock@p2 (E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-21HID: ntrig: add support for new firwmare versionsmicki3-0/+72
Signed-off-by: Micki Balanga <micki@n-trig.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-04HID: check for HID_QUIRK_IGNORE during probingJindrich Makovicka1-1/+2
While the hardcoded ignore list is checked in hid_add_device(), the user supplied ignore flags are not. Thus, the IGNORE quirk (0x0004) cannot be used to stop usbhid from binding devices like iBuddy, which has been recently removed from the ignore list due to product ID conflict. This patch adds the user quirk check to hid_add_device(), and makes hid_add_device() return -ENODEV when HID_QUIRK_IGNORE bit is set. HID_QUIRK_NO_IGNORE still takes precedence over HID_QUIRK_IGNORE. With the patch, iBuddy works properly using libusb when the following option is added to modprobe.d: options usbhid quirks=0x1130:0x0002:0x0004 Signed-off-by: Jindrich Makovicka <makovick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-31HID: roccat: fix modules interdependenciesRandy Dunlap1-0/+1
hid-roccat-kone calls the hid-roccat module interfaces, so the former should depend on or select the latter to prevent build errors, like: hid-roccat-kone.c:(.text+0x133ed2): undefined reference to `roccat_report_event' hid-roccat-kone.c:(.text+0x133fa8): undefined reference to `roccat_disconnect' hid-roccat-kone.c:(.text+0x1353be): undefined reference to `roccat_connect' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-27Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: usbtouchscreen - support bigger iNexio touchscreens Input: ads7846 - return error on regulator_get() failure Input: twl4030-vibra - correct the power down sequence Input: enable onkey driver of max8925 Input: use ABS_CNT rather than (ABS_MAX + 1)
2010-05-25HID: roccat: fix build failure if built as moduleJiri Kosina1-1/+1
Fix build failure when roccat and roccat-kone are built as modules. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-25HID: roccat: propagate special events of roccat hardware to userspaceStefan Achatz6-0/+526
Module roccat is a char device used to report special events of roccat hardware to userland. These events include requests for on-screen-display of profile or dpi settings or requests for execution of macro sequences that are not stored in device. The information in these events depends on hid device implementation and contains data that is not available in a single hid event or else hidraw could have been used. It is inspired by hidraw, but uses only one circular buffer for all readers. The device is as generic as possible so that the functionality is usable by all (kone and upcomming) roccat device drivers. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24HID: Add the GYR4101US USB ID to hid-gyrationCory Maccarrone3-0/+3
This change adds in the USB product ID for the Gyration GYR4101US USB media center remote control. This remote is similar enough to the other two devices that this driver can be used without any other changes to get full support for the remote. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24HID: fix hid-roccat-kone for bin_attr API changeStephen Rothwell1-12/+12
After merging the driver-core tree, today's linux-next build (x86_64 allmodconfig) produced these warnings: drivers/hid/hid-roccat-kone.c:694: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:696: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:701: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:703: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:708: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:710: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:715: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:717: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:722: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:724: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:729: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:731: warning: initialization from incompatible pointer type Introduced by commit 867040163f10f2b52b45bc573f330d6eb28f5914 ("sysfs: add struct file* to bin_attr callbacks") from the driver-core tree interacting with commit 14bf62cde79423a02a590e02664ed29a36facec1 ("HID: add driver for Roccat Kone gaming mouse") from the hid tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-21Merge branch 'for-linus' of ↵Linus Torvalds23-157/+6704
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (59 commits) HID: fix up 'EMBEDDED' mess in Kconfig HID: roccat: cleanup preprocessor macros HID: roccat: refactor special event handling HID: roccat: fix special button support HID: roccat: Correctly mark init and exit functions HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available HID: hid-samsung: remove redundant key mappings HID: add omitted hid-zydacron.c file HID: hid-samsung: add support for Creative Desktop Wireless 6000 HID: picolcd: Eliminate use after free HID: Zydacron Remote Control driver HID: Use kmemdup HID: magicmouse: fix input registration HID: make Prodikeys driver standalone config option HID: Prodikeys PC-MIDI HID Driver HID: hidraw: fix indentation HID: ntrig: add filtering module parameters HID: ntrig: add sysfs access to filter parameters HID: ntrig: add sensitivity and responsiveness support HID: add multi-input quirk for eGalax Touchcontroller ...
2010-05-21HID: fix up 'EMBEDDED' mess in KconfigJiri Kosina1-31/+16
The whole point of making some of the drivers automatically selected unless 'EMBEDDED' was to handle quirks transparently after their separation from the generic core. Over time, some of the later-added quirks grew into more standalone drivers, implementing non-trivial features a being larger than a few bytes of code. In addition to that, some of the standalone drivers don't make sense for 99.9% of the users, as they are very specific to rare devices. Therefore build by default in only those drivers which - we historically used to support even before quirk separation from the core code - are isolated enough and likely to hit quite large portion of the users anyway (Microsoft, Logitech) Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-21Input: use ABS_CNT rather than (ABS_MAX + 1)Daniel Mack1-1/+1
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-21USB: rename usb_buffer_alloc() and usb_buffer_free() usersDaniel Mack3-13/+13
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. All call sites have been changed accordingly, except for staging drivers. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21USB: remove uses of URB_NO_SETUP_DMA_MAPAlan Stern3-11/+6
This patch (as1350) removes all usages of coherent buffers for USB control-request setup-packet buffers. There's no good reason to reserve coherent memory for these things; control requests are hardly ever used in large quantity (the major exception is firmware transfers, and they aren't time-critical). Furthermore, only seven drivers used it. We might as well always use streaming DMA mappings for setup-packet buffers, and remove some extra complexity from usbcore. The DMA-mapping portion of hcd.c is currently in flux. A separate patch will be submitted to remove support for URB_NO_SETUP_DMA_MAP after everything else settles down. The removal should go smoothly, as by then nobody will be using it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-19Merge branches 'ntrig', 'picolcd', 'prodikeys' and 'roccat-kone' into for-linusJiri Kosina10-9/+5371
Conflicts: drivers/hid/Makefile
2010-05-19Merge branch 'egalax' into for-linusJiri Kosina6-2/+292
Conflicts: drivers/hid/hid-ids.h
2010-05-19Merge branch 'cando' into for-linusJiri Kosina5-0/+285
Conflicts: drivers/hid/hid-core.c drivers/hid/hid-ids.h
2010-05-19Merge branches 'upstream-fixes', 'bkl-removal', 'debugfs-fixes' and ↵Jiri Kosina5-41/+78
'hid-suspend' into for-linus
2010-05-19Merge branch 'upstream' into for-linusJiri Kosina14-79/+667
Conflicts: drivers/hid/hid-wacom.c
2010-05-19HID: roccat: cleanup preprocessor macrosStefan Achatz2-8/+5
Removed useless preprocessor macros and renamed remaining one to be more qualified. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-19HID: roccat: refactor special event handlingStefan Achatz1-34/+20
As special events are reported along with hid event information all events are now processed further by standard handler. Also cleaned up this code. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-19HID: roccat: fix special button supportStefan Achatz2-8/+22
Added new data and changed workaround for abnormal button behaviour according to new gained knowledge about Roccat Kone device. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-18HID: roccat: Correctly mark init and exit functionsStefan Achatz1-2/+2
Added the __init and __exit hints for module functions. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-18HID: hidraw: Use Interrupt Endpoint for OUT Transfers if AvailableAlan Ott1-10/+30
This patch makes the hidraw driver use the first Interrupt OUT endpoint for HID transfers to the device if such an endpoint exists. This is consistent with the behavior of the hiddev driver, and the logic is similar. From the USB HID specification: The Interrupt Out pipe is optional. If a device declares an Interrupt Out endpoint then Output reports are transmitted by the host to the device through the Interrupt Out endpoint. If no Interrupt Out endpoint is declared then Output reports are transmitted to a device through the Control endpoint, using Set_Report(Output) requests. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-18HID: hid-samsung: remove redundant key mappingsDon Prince1-7/+0
Remove 7 redundant key mappings from Desktop Wireless 6000 that are already handled by the default hid code. Reported-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-17HID: add omitted hid-zydacron.c fileJiri Kosina1-0/+237
Commit a9885c8f7bf62e251fc178 ("HID: Zydacron Remote Control driver") added hid-zydracon driver by Don Prince, but mistakenly omitted hid-zydracon.c file itself. Properly add the file. Reported-by: Don Prince <dhprince.devel@yahoo.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-17HID: hid-samsung: add support for Creative Desktop Wireless 6000Don Prince4-13/+93
Add support for the multimedia buttons of the Creative Desktop Wireless 6000 keyboard/mouse combo which are not currently handled by the default/samsung HID driver. Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-17HID: picolcd: Eliminate use after freeJulia Lawall1-1/+1
The skip label frees resp, which has not been allocated at the point of this goto and then does a break, based on the fact that err is non-zero. This is replaced by a break directly. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @free@ expression E; position p; @@ kfree@p(E) @@ expression free.E, subE<=free.E, E1; position free.p; @@ kfree@p(E) ... ( subE = E1 | * E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-17HID: Zydacron Remote Control driverDon Prince4-0/+12
A specialised HID driver for the Zydacron Remote Control (usb id: 13ec:0006). The specialised HID driver adds support for the buttons which are not currently handled by the default HID driver. Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-17HID: Use kmemdupJulia Lawall1-2/+1
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-12HID: magicmouse: fix input registrationJiri Kosina1-1/+4
When HIDRAW is not set, hid_hw_start() returns ENODEV as no subsystem has claimed the magicmouse device, and probe routine bails out. Which is not what we want. This happens because magicmouse driver is instantiating the connection to Input subsystem itself, and since commit 28918c211d86b ("HID: magicmouse: fix oops after device removal") the HID core is not registering input device itself. Fix this by letting HID core register the input device (so that hid_hw_start() succeeds, as the device is claimed by at least one subsystem) and de-register it again later before proceeding with proper input setup. Reported-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-12HID: make Prodikeys driver standalone config optionJiri Kosina1-2/+1
Analogically for other full-fledged HID drivers, make the Prodikeys driver independent on EMBEDDED. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-12HID: Prodikeys PC-MIDI HID DriverDon Prince5-0/+931
A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard. The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard, multimedia keys and a touch sensitive musical keyboard. The specialised HID driver adds full support for the musical keyboard and extra multimedia keys which are not currently handled by the default HID driver. The specialised HID driver interfaces with ALSA, and presents the midi keyboard as a rawmidi device. Sustain duration, octave shifting and the midi output channel can be read/written form userspace via sysfs. Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> ALSA parts: Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: hidraw: fix indentationAntonio Ospite1-1/+1
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: ntrig: add filtering module parametersRafi Rubin1-0/+21
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: ntrig: add sysfs access to filter parametersRafi Rubin1-0/+285
This should make it a little more convenient to tweak the filtering parameters on the fly. Also unlike load-time parameters, this provides independent tuning for each device conntected. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11HID: ntrig: add sensitivity and responsiveness supportRafi Rubin1-9/+211
The old rejection size thresholds were too high for the 12" devices. Larger surfaces like the Dell Studio17 exacerbated the problem since contact size is reported on the same logical scale, making a contact look smaller to the larger screen. Since we have observed erroneous ghost events from these devices we still need to filter the incoming stream. The prior size threshold filter is still in place, though with defaults set to leave it off. This patch adds the two new classes of filters, those that reject live frames before activation, and those that reject empty frames until deactivation. These filters are expressed in terms of a simple state machine for clarity (I hope). The activation filter has two components, slack and size, events are discarded until either is satisfied. Slack is defined as the number of seemingly good contacts to read before accepting the stream as valid (if the threshold is reached in the middle of a frame the remainder of that frame is still discarded). The deactivation filter discards empty frames until hitting a deactivate slack. This time measured in frames. N-Trig devices emit 5-8 (observed so far) empty frames at the end of multitouch activity. Ignoring the first few enables us to safely and gracefully handle erroneous empty frames, thus preventing a change in the tool state which would otherwise result in things like broken lines or dragged objects being dropped in bad places. Also, now that devices with different logical densities have been observed, the aforementioned sizes are scaled from physical to logical scales once those scales are identified. Hopefully this should mean that a given threshold value means the same thing across differing devices. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-10HID: add multi-input quirk for eGalax TouchcontrollerPeter Hutterer2-0/+4
I've got one of these devices on my desk and it seems that it suffers from the ABS_Z/ABS_RX issue that we've seen in other devices before. This patch uses the same reasoning as 9db630b48 ("HID: add multi-input quirk for NextWindow Touchscreen"). Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-08HID: fix suspend crash by moving initializations earlierAlan Stern1-7/+6
Although the usbhid driver allocates its usbhid structure in the probe routine, several critical fields in that structure don't get initialized until usbhid_start(). However if report descriptor parsing fails then usbhid_start() is never called. This leads to problems during system suspend -- the system will freeze. This patch (as1378) fixes the bug by moving the initialization statements up into usbhid_probe(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-By: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03HID: sony: fix sony_set_operational_btAntonio Ospite1-1/+1
Don't send the report type as part of the data, this prevents the controller from going into the operational state at all. This is completely equivalent to what the code originally meant to accomplish: as per in net/bluetooth/hidp/core.c::hidp_output_raw_report(), by using HID_FEATURE_REPORT here, what will be actually sent is (HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE) which is exactly 0x53. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03HID: add PM support to PicoLCD deviceBruno Prémont1-5/+74
Add PM support in order to turn off backlight on suspend, restore it on resume and especially restore complete state on reset-resume. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03Merge branch 'hid-suspend' into picolcdJiri Kosina23-2/+49
2010-05-03HID: ntrig: Remove unused macro, TripleTap and QuadTapRafi Rubin1-30/+2
Removing the higher number taps. Their usage was incorrect and even if correct they should not be used for a touch screen. _MT_ events should be used to communicate multiple fingers. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03HID: ntrig: TipSwitch for single touch mode touch.Rafi Rubin1-8/+21
Include TipSwitch in the touch detection decision for some single touch firmwares. Confidence and InRange are high for all finger events including those used to indicate the finger is no longer in contact with the sensor. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-29HID: add support for BTC Emprex 3009URF III Vista MCE RemoteWayne Thomas4-15/+29
The Behavior Tech. Computer Corp. (BTC) remote branded as "Emprex 3009URF III Vista Remote Controller" uses non-standard mappings for all of its 'special purpose' keys (0xffbc usage page). This patch modifies the existing hid-topseed quirky driver to support both remotes in order to prevent proliferation of in-kernel quirky drivers until such a time that udev remapping works with these devices. Tested successfully with both the "Emprex" remote and the "CyberLink" remote originally supported by the hid-topseed driver. Signed-off-by: Wayne Thomas <waynethomas69@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-27HID: split picolcd's operation_mode sysfs attributeBruno Prémont1-17/+45
Original operation_mode sysfs attribute accepts the operation mode as main value with an option delay as second value to change the start-up delay on mode change. As it is preferred to have exactly one value per sysfs attribute, extract this delay into a separate sysfs attribute called operation_mode_delay. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-27HID: add suspend/resume hooks for hid driversBruno Prémont1-1/+23
Add suspend/resume hooks for HID drivers so these can do some additional state adjustment when device gets suspended/resumed. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 10:49:34 +0300