summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij4-15/+11
Linux 4.4-rc6
2015-12-13Merge tag 'usb-4.4-rc5' of ↵Linus Torvalds2-11/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of small USB fixes for 4.4-rc5. All of them have been in linux-next. The majority are gadget and phy issues, with a few new quirks and device ids added as well" * tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (32 commits) USB: add quirk for devices with broken LPM xhci: fix usb2 resume timing and races. usb: musb: fail with error when no DMA controller set usb: gadget: uvc: fix permissions of configfs attributes usb: musb: core: Fix pm runtime for deferred probe usb: phy: msm: fix a possible NULL dereference USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq usb: Quiet down false peer failure messages usb: xhci: fix config fail of FS hub behind a HS hub with MTT xhci: Fix memory leak in xhci_pme_acpi_rtd3_enable() usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message USB: whci-hcd: add check for dma mapping error usb: core : hub: Fix BOS 'NULL pointer' kernel panic USB: quirks: Apply ALWAYS_POLL to all ELAN devices usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron USB: quirks: Fix another ELAN touchscreen usb: dwc3: gadget: don't prestart interrupt endpoints USB: serial: Another Infineon flash loader USB ID USB: cdc_acm: Ignore Infineon Flash Loader utility USB: cp210x: Remove CP2110 ID from compatibility list ...
2015-12-02HID: lg: restrict filtering out of first interface to G29 onlyBenjamin Tissoires1-2/+3
Looks like 29fae1c85 ("HID: logitech: Add support for G29") was a little bit aggressive and broke other devices. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=108121 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-02USB: quirks: Apply ALWAYS_POLL to all ELAN devicesAdrien Vergé2-11/+3
All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use this quirk for all devices from this vendor, rather than maintaining a list of all its known product IDs. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20HID: usbhid: add Logitech G710+ keyboard quirk NOGETJimmy Berry2-0/+2
Without quirk keyboard repeats '6' until volume control is used since it indicates the key is pressed without ever releasing. Signed-off-by: Jimmy Berry <jimmy@boombatower.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17HID: wacom: fixup quirks setup for WACOM_DEVICETYPE_PADJiri Kosina1-1/+1
Given that INTUOSHT < BAMBOO_PT features->type >= INTUOSHT || features->type <= BAMBOO_PT condition is always true, and therefore device_type is under certain circumstances wrongly set with WACOM_DEVICETYPE_PAD bit set. Fix the condition so that it actually represents the range as intended. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-13HID: wacom: Add outbounding area for DTU1141Ping Cheng1-1/+2
DTU1141 has an extra 1 mm tablet active outbounding area on each side of the display, same as those recently released DTUs. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-07Merge branch 'for-linus' of ↵Linus Torvalds21-128/+1279
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - Intel Skylake Win8 precision touchpads support fixes/improvements from Mika Westerberg - Lenovo Yoga 2 quirk from Ritesh Raj Sarraf - potential uninitialized buffer access fix in HID core from Richard Purdie - Wacom Intuos and Wacom Cintiq 2 support improvements from Jason Gerecke and Ping Cheng - initiation of sysfs deprecation process for most of the roccat drivers, from the roccat support maintiner Stefan Achatz - quite a few device ID / quirk additions and small fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: logitech: Add support for G29 HID: logitech: Simplify wheel detection scheme HID: wacom: Call 'wacom_query_tablet_data' only after 'hid_hw_start' HID: wacom: Fix ABS_MISC reporting for Cintiq Companion 2 HID: wacom: Remove useless conditions from 'wacom_query_tablet_data' HID: wacom: fix Intuos wireless report id issue HID: fix some indenting issues HID: wacom: Expect 'touch_max' touches if HID_DG_CONTACTCOUNT not present HID: wacom: Tie cached HID_DG_CONTACTCOUNT indices to report ID HID: roccat: Fixed resubmit: Deprecating most Roccat sysfs attributes HID: wacom: Report full pressure range for Intuos, Cintiq 13HD Touch HID: wacom: Add support for Cintiq Companion 2 HID: multitouch: Fetch feature reports on demand for Win8 devices HID: sensor-hub: Add quirk for Lenovo Yoga 2 with ITE Chips HID: usbhid: Fix for the WiiU adapter from Mayflash HID: corsair: boolify struct k90_led.removed HID: corsair: Add Corsair Vengeance K90 driver HID: hid-input: allow input_configured callback return errors HID: multitouch: Add suffix for HID_DG_TOUCHPAD HID: i2c-hid: Fill in physical device providing HID functionality ...
2015-11-06Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair', ↵Jiri Kosina30-152/+1294
'for-4.4/dragonrise', 'for-4.4/i2c-hid', 'for-4.4/logitech', 'for-4.4/microsoft', 'for-4.4/multitouch', 'for-4.4/roccat-sysfs-deprecation', 'for-4.4/upstream' and 'for-4.4/wacom' into for-linus
2015-11-06HID: logitech: Add support for G29Simon Wood3-4/+63
At present the G29 is mis-identified as a DFGT, this patch ensures that the wheel is correctly detected and allows setting the LEDs and turning range via the '/sys' interface. This wheel can also emulate other types of Logitech wheels. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-06HID: logitech: Simplify wheel detection schemeSimon Wood1-42/+28
Simplfy how hid-logitech driver detects the native mode of the wheel, done by looking at the USB-ID revision and comparing bit mask. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-05HID: hid-gfrm: avoid warning for input_configured API changeArnd Bergmann1-1/+2
The input_configured callback was recently changed to return an 'int', but the newly added driver uses the old API: drivers/hid/hid-gfrm.c:151:22: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] This changes the driver like the other ones. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 34fc1322e7aa ("HID: hid-gfrm: Google Fiber TV Box remote controls") Fixes: b2c68a2f1bab ("HID: hid-input: allow input_configured callback return errors") Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-05HID: hid-input: allow input_configured callback return errorsDmitry Torokhov11-26/+64
When configuring input device via input_configured callback we may encounter errors (for example input_mt_init_slots() may fail). Instead of continuing with half-initialized input device let's allow driver indicate failures. Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-05HID: wacom: Call 'wacom_query_tablet_data' only after 'hid_hw_start'Jason Gerecke1-18/+18
When connecting the Cintiq Companion 2 as an external tablet (i.e., using it in "hybrid" mode) it has been seen to cause the kernel of the machine it is connected to to Oops. The cause has been traced to us attempting to switch the tablet's mode prior to actually starting HID device (resulting in the eventual dereference of the uninitialized control URB). Commit 3b164a0 moved the mode switch from occuring post-start to occurring pre-start. The change was not seen to cause issues largely due to the fact that most devices mode switch with 'hid_hw_raw_request' (which is safe to call prior to start) rather than 'hid_hw_request'. Moving the call back to its original location resolves the issue, but causes some touch-only Bamboo tablets (e.g. 056a:00d0) to stop working. The affected tablets require us to perform a mode switch on their vestigial pen interface prior ignoring with -ENODEV, meaning that the code which is responsible for doing the ignoring has to move as well. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-03HID: wacom: Fix ABS_MISC reporting for Cintiq Companion 2Jason Gerecke1-1/+1
The pad handling code introduced for the Cintiq Companion 2 (f7acb55) looks at the wrong bytes in the report when deciding whether ABS_MISC should be sent. This does not cause any issues with the X driver now that the pen and pad have been split to separate devices, but is incorrect and has caused issues when backporting to distros with pre- 3.17 kernels. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-03HID: wacom: Remove useless conditions from 'wacom_query_tablet_data'Jason Gerecke1-1/+1
When support for the Cintiq Companion Hybrid and Cintiq Companion 2 was added (36d3c51 and f7acb55), the 'wacom_query_tablet_data' function was updated to include references to CINTIQ_HYBRID and CINTIQ_COMPANION_2 with the thought that they were necessary to switch the touch interface into the proper mode. This is unnecessary, however, since those types are only ever associated with the pen interface -- the touch interfaces are either CINTIQ_24HDT or HID_GENERIC. To avoid confusion in the future, we remove the unnecessary CINTIQ_HYBRID and CINTIQ_COMPANION_2 conditions. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-02HID: wacom: fix Intuos wireless report id issuePing Cheng3-3/+2
Intuos Pen in wireless mode does not have the same report id (2) as when it is in USB mode (17). This patch also moves WIRELESS next to REMOTE in type enum so we can group devices with similar features easily. Reported-by: Dale Brewe <dlbrewe@hotmail.com> Tested-by: Dale Brewe <dlbrewe@hotmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-26HID: hid-gfrm: Google Fiber TV Box remote controlsPetri Gynther3-0/+165
Add HID driver for Google Fiber TV Box remote controls Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-21HID: fix some indenting issuesJiri Slaby4-8/+9
Some drivers indent some lines in a very weird manner. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-21HID: wacom: Expect 'touch_max' touches if HID_DG_CONTACTCOUNT not presentJason Gerecke1-2/+2
When introduced in commit 1b5d514, the check 'if (hid_data->cc_index >= 0)' in 'wacom_wac_finger_pre_report' was intended to switch where the driver got the expected number of contacts from: HID_DG_CONTACTCOUNT if the usage was present, or 'touch_max' otherwise. Unfortunately, an oversight worthy of a brown paper bag (specifically, that 'cc_index' could never be negative) meant that the latter 'else' clause would never be entered. The patch prior to this one introduced a way for 'cc_index' to be negative, but only if HID_DG_CONTACTCOUNT is present in some report _other_ than the one being processed. To ensure the 'else' clause is also entered for devices which don't have HID_DG_CONTACTCOUNT on _any_ report, we add the additional constraint that 'cc_report' be non-zero (which is true only if the usage is present in some report). Cc: stable@vger.kernel.org Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-21HID: wacom: Tie cached HID_DG_CONTACTCOUNT indices to report IDJason Gerecke2-0/+27
The cached indicies 'cc_index' and 'cc_value_index' introduced in 1b5d514 are only valid for a single report ID. If a touchscreen has multiple reports with a HID_DG_CONTACTCOUNT usage, its possible that the values will not be correct for the report we're handling, resulting in an incorrect value for 'num_expected'. This has been observed with the Cintiq Companion 2. To address this, we store the ID of the report those indicies are valid for in a new 'cc_report' variable. Before using them to get the expected contact count, we first check if the ID of the report we're processing matches 'cc_report'. If it doesn't, we update the indicies to point to the HID_DG_CONTACTCOUNT usage of the current report (if it has one). Cc: stable@vger.kernel.org Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-21HID: wacom: Report full pressure range for Intuos, Cintiq 13HD TouchJason Gerecke1-1/+1
The new Intuos tablets added in eda01da and the Cintiq 13HD Touch added in b4bf212 are capable of reporting 2048 levels of pressure. Although the kernel reports the correct range to userspace, an oversight has resulted in the driver ingoring the 11th pressure bit and only sending pressures of 0 through 1023. We could fix this issue by expanding the type check to include these devices, but it makes much more sense to just have the driver look at the device's maximum pressure when determining if it should read the 11th bit. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-21HID: wacom: Add support for Cintiq Companion 2Jason Gerecke3-2/+37
Adds support for the EMR (pen+pad) and touchscreen devices used by the Wacom Cintiq Companion 2. This applies both to using the device as a standalone system, as well as when operating in "Cintiq mode" (where the EMR/touchscreen are simply exposed as USB devices to the system its connected to). Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Clifford Jolly <expiredpopsicle@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-12HID: multitouch: Fetch feature reports on demand for Win8 devicesMika Westerberg1-1/+44
Some newer Intel Skylake based Dell laptops with Win8 precision touchpad fail when initial feature reports are fetched from it. Below is an example output with some additional debug included: i2c_hid i2c-DLL0704:01: Fetching the HID descriptor i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=20 00 i2c_hid i2c-DLL0704:01: HID Descriptor: 1e 00 00 01 99 02 21 00 24 ... ... i2c_hid i2c-DLL0704:01: i2c_hid_get_report i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 38 02 23 00 i2c_hid i2c-DLL0704:01: report (len=4): 04 00 08 05 i2c_hid i2c-DLL0704:01: report id 13 i2c_hid i2c-DLL0704:01: i2c_hid_get_report i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 3d 02 23 00 i2c_hid i2c-DLL0704:01: failed to retrieve report from device. i2c_hid i2c-DLL0704:01: report id 7 i2c_hid i2c-DLL0704:01: i2c_hid_get_report i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 37 02 23 00 i2c_hid i2c-DLL0704:01: report (len=259): 03 01 07 fc 28 fe 84 40 ... i2c_hid i2c-DLL0704:01: report id 4 i2c_hid i2c-DLL0704:01: i2c_hid_get_report i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 34 02 23 00 We manage to fetch few reports but then the touchpad dies: i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0704:01: failed to retrieve report from device. it eventually pulls the whole I2C bus low: i2c_designware i2c_designware.1: controller timed out i2c_hid i2c-DLL0704:01: failed to set a report to device. Fix this by preventing initial feature report retrieval for Win8 devices. Instead we fetch reports as needed in mt_feature_mapping(). This prevents fetching reports which might cause problems with the device in question. Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-05HID: sensor-hub: Add quirk for Lenovo Yoga 2 with ITE ChipsRitesh Raj Sarraf2-0/+4
This patch is a follow-up to 47eeca8a48 (" HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE") The Lenovo Yoga 2 13 seems to be sold in multiple variants with minor difference3s. IN my case, the USB ID for ITE chip is different than the Yoga 2 11 and Yoga 3 14. Without the quirk, no data is received from the accelerometer. I have verified the patch, testing this on 4.3-rc4 (and 4.2 stable). With this patch, proper orientation data is received. rrs@learner:~/Community/UpstreamSources/linux-upstream_GIT (stable-42)$ monitor-sensor ** Message: Accelerometer orientation changed: bottom-up ** Message: Light changed: 0.000000 (lux) ±** Message: Accelerometer orientation changed: left-up ** Message: Accelerometer orientation changed: bottom-up ** Message: Accelerometer orientation changed: left-up ** Message: Accelerometer orientation changed: normal ** Message: Light changed: 29.999999 (lux) monitor-sensor can be found in the iio-sensor-proxy tool. Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-05HID: usbhid: Fix for the WiiU adapter from MayflashOliver Schmitt2-0/+2
The WiiU adapter from Mayflash (see http://www.mayflash.com/Products/NINTENDOWiiU/W009.html) is not working correctly. The "XInput" mode works fine, the controller is recognized as a xbox controller. But it is only possible to connect one controller with this method. In "DInput" mode the device is recognized as some kind of mouse input but no joystick is created. This commit will change this behavior with HID_QUIRK_MULTI_INPUT to split the device into 4 input devices so that it will also create joysticks in /dev/input/js*. Signed-off-by: Oliver Schmitt <voltumna@gmx.net> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-30HID: corsair: boolify struct k90_led.removedJiri Kosina1-6/+6
'removed' field of struct k90_led is in its nature bool, let's use it that way. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-30HID: corsair: Add Corsair Vengeance K90 driverClément Vuchener5-0/+688
This patch implements a HID driver for the Corsair Vengeance K90 keyboard. It fixes the behaviour of the keys using incorrect HID usage codes and exposes the macro playback mode and current profile to the user space through sysfs attributes. It also adds two LED class devices controlling the "record" LED and the backlight. Signed-off-by: Clément Vuchener <clement.vuchener@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-30HID: hid-input: allow input_configured callback return errorsDmitry Torokhov11-26/+64
When configuring input device via input_configured callback we may encounter errors (for example input_mt_init_slots() may fail). Instead of continuing with half-initialized input device let's allow driver indicate failures. Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-29HID: multitouch: Add suffix for HID_DG_TOUCHPADMika Westerberg1-0/+3
Instead of printing "UNKNOWN" as device suffix for HID_DG_TOUCHPAD call the device as "Touchpad". Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Daniel Martin <consume.noise@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-29HID: i2c-hid: Fill in physical device providing HID functionalityMika Westerberg1-0/+1
Currently hid_connect() prints out following when I2C connected HID devices is connected: hid-multitouch 0018:03EB:2136.0001: ... [ATML3432:00 03EB:2136] on After "on " should read physical device name but it is left empty by the driver. Make it look better and fill in the physical device name. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Daniel Martin <consume.noise@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-23HID: wacom: Add four new Intuos devicesPing Cheng3-28/+82
This series of devices supports both pen and touch. It reports touch data in Bamboo3 format and pen data in Intuos pro format. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-By: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-23HID: wacom: Cleanup unsupported device_type for BAMBOO_PTPing Cheng3-30/+54
Not all Bamboo support both pen and touch. Make sure we deal with pen only and touch only devices properly. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-By: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-23HID: core: Avoid uninitialized buffer accessRichard Purdie1-1/+1
hid_connect adds various strings to the buffer but they're all conditional. You can find circumstances where nothing would be written to it but the kernel will still print the supposedly empty buffer with printk. This leads to corruption on the console/in the logs. Ensure buf is initialized to an empty string. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-23HID: Make I2C a known bus in hid_connect()Daniel Martin1-0/+3
Just to prettify the log message. Otherwise it would be <UNKNOWN>. Signed-off-by: Daniel Martin <consume.noise@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-23HID: Add new Microsoft Type Cover 3 product IDDonavan Lance4-0/+6
Adds support for Microsoft Type Cover 3 with 0x07e2 product ID. Signed-off-by: Donavan Lance <shvr@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Drivers, drivers, drivers... No interesting input core changes this time" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits) Input: elan_i2c - use iap_version to get firmware information Input: max8997_haptic - fix module alias Input: elan_i2c - fix typos for validpage_count Input: psmouse - add small delay for IBM trackpoint pass-through mode Input: synaptics - fix handling of disabling gesture mode Input: elan_i2c - enable ELAN0100 acpi panels Input: gpio-keys - report error when disabling unsupported key Input: sur40 - fix error return code Input: sentelic - silence some underflow warnings Input: zhenhua - switch to using bitrev8() Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency Input: cap11xx - add LED support Input: elants_i2c - fix for devm_gpiod_get API change Input: elan_i2c - enable asynchronous probing Input: elants_i2c - enable asynchronous probing Input: elants_i2c - wire up regulator support Input: do not emit unneeded EV_SYN when suspending Input: elants_i2c - disable idle mode before updating firmware MAINTAINERS: Add maintainer for atmel_mxt_ts Input: atmel_mxt_ts - remove warning on zero T44 count ...
2015-09-04HID: dragonrise: fix HID Descriptor for 0x0006 PIDMaciej Zuk1-0/+58
Fixed HID descriptor for DragonRise Joystick. Replaced default descriptor which doubles Z axis and causes mixing values of X and Z axes. Signed-off-by: Maciej Zuk <gzmlke@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: logitech-hidpp: add support to disable tap-to-click on the K400Benjamin Tissoires1-0/+133
The Logitech K400 keyboard has an embedded touchpad which is seen as a mouse from the OS point of view. There is a hardware shortcut to disable tap-to-click but the setting is not remembered accross reset, annoying some users. We can toggle this feature from the host by using the feature 0x6010: Touchpad FW items Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: logitech-hidpp: split HIDPP_QUIRK_DELAYED_INIT in twoBenjamin Tissoires1-9/+17
HIDPP_QUIRK_DELAYED_INIT means two things currently: - we want to delay the initialization process - we do not want hid to create an input device based on the report descriptor. This should actually be 2 different quirks so we can have special connect events while still having HID creating the input for us. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: sensor-hub: Fixup for Lenovo ThinkPad Helix 2 sensor hub reportFernando D S Lima1-0/+14
There is an error in the report descriptor of the Thinkpad Helix 2 where logical minimum value (557376) is greater than logical maximum (491200) for all of the magnetic flux axis data fields. This error results in a report descriptor parsing failure that causes the sensors attached to the hub not to be detected. dmesg excerpt: [ 19.866905] drivers/hid/hid-core.c: logical range invalid 0x88140 0x77ec0 [ 19.866914] hid-sensor-hub 0018:2047:0855.0007: item 0 1 0 8 parsing failed [ 19.866926] hid-sensor-hub 0018:2047:0855.0007: parse failed [ 19.866933] hid-sensor-hub: probe of 0018:2047:0855.0007 failed with error -22 Add a report fixup to change magnetic flux logical minimums to -557376 for the parsing to succeed and the sensors to get detected. After applying the fix the sensors get detected, with corresponding drivers (hid-accel-3d,hid-gyro-3d,etc) loaded, and its possible to read their values. Signed-off-by: Fernando D S Lima <fernandodsl@gmail.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: saitek: mode button quirk for Mad Catz R.A.T.5Harald Brinkmann4-3/+6
This patch enables the Saitek HID quirk for the mode button of the Mad Catz R.A.T.5 gaming mouse by adding the same quirk that's been neeeded for preivous versions. [jikos@kernel.org: update changelog a little bit] Signed-off-by: Harald Brinkmann <hbrinkmann@braincalibration.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-03Merge branch 'next' into for-linusDmitry Torokhov35-1333/+4373
Prepare first round of input updates for 4.3 merge window.
2015-09-01Merge branch 'for-4.3/microsoft' into for-linusJiri Kosina4-8/+14
Conflicts: drivers/hid/usbhid/hid-quirks.c
2015-09-01Merge branches 'for-4.3/chicony', 'for-4.3/cp2112', 'for-4.3/i2c-hid', ↵Jiri Kosina19-291/+953
'for-4.3/lenovo', 'for-4.3/logitech', 'for-4.3/multitouch', 'for-4.3/picolcd', 'for-4.3/rmi', 'for-4.3/sensor-hub', 'for-4.3/sony' and 'for-4.3/wacom' into for-linus
2015-09-01Merge branch 'for-4.3/gembird' into for-linusJiri Kosina6-0/+142
2015-09-01Merge branches 'for-4.2/upstream-fixes-devm-fixed' and 'for-4.3/upstream' ↵Jiri Kosina6-12/+34
into for-linus
2015-08-28HID: wacom: wacom_setup_numbered_buttons is local to wacom_wacJiri Kosina1-1/+1
wacom_setup_numbered_buttons() is not used outside of wacom_wac.c, make it static. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Add support for Express Key Remote.Aaron Skomra4-2/+351
This device is pad (buttons) only, there is no stylus or touch. Up to five remotes can pair with the device's associated USB dongle. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>