summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23drm/amd/display: No display after resume from WB/CBTsung-hua Lin1-0/+37
[why] First MST sideband message returns AUX_RET_ERROR_HPD_DISCON on certain intel platform. Aux transaction considered failure if HPD unexpected pulled low. The actual aux transaction success in such case, hence do not return error. [how] Not returning error when AUX_RET_ERROR_HPD_DISCON detected on the first sideband message. v2: squash in fix (Alex) Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-23drm/amdgpu: fix use-after-free during gpu recoveryStanley.Yang1-1/+5
[Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/pm: update driver if header for smu_13_0_7lyndonli2-39/+80
update driver if header for smu_13_0_7 Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-23drm/amd/display: Fix rotated cursor offset calculationDavid Galiffi3-30/+64
[Why] Underflow is observed when cursor is still enabled when the cursor rectangle is outside the bounds of it's surface viewport. [How] Update parameters used to determine when cursor should be disabled. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use new num clk levels struct for max mclk indexDillon Varone1-1/+1
[WHY?] When calculating watermark and dlg values, the max mclk level index and associated speed are needed to find the correlated dummy latency value. Currently the incorrect index is given due to a clock manager refactor. [HOW?] Use num_memclk_level from num_entries_per_clk struct for getting the correct max mem speed. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Avoid setting pixel rate divider to N/ATaimur Hassan4-8/+13
[Why] Pixel rate divider values should never be set to N/A (0xF) as the K1/K2 field is only 1/2 bits wide. [How] Set valid divider values for virtual and FRL/DP2 cases. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use viewport height for subvp mall allocation sizeDillon Varone1-1/+1
[WHY?] MALL allocation size depends on the viewport height, not the addressable vertical lines, which will not match when scaling. [HOW?] Base MALL allocation size calculations off viewport height. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update soc bounding box for dcn32/dcn321Dillon Varone2-7/+7
[Description] New values for soc bounding box and dummy pstate. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-23drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASANLyude Paul1-1/+2
There's been a very long running bug that seems to have been neglected for a while, where amdgpu consistently triggers a KASAN error at start: BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu] Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889 After digging through amd's rather creative method for accessing registers, I eventually discovered the problem likely has to do with the fact that on my dce120 GPU there are supposedly 7 sets of audio registers. But we only define a register mapping for 6 sets. So, fix this and fix the KASAN warning finally. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu/psp: don't free PSP buffers on suspendAlex Deucher1-7/+9
We can reuse the same buffers on resume. v2: squash in S4 fix from Shikai Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-23Revert "drm/fb-helper: Perform damage handling in deferred-I/O helper"Thomas Zimmermann1-9/+3
This reverts commit 5fc586a058babc71c82a038477581b7bfe1c6e2a. Needed to restore the fbdev damage worker. There have been bug reports about locking order [1] and incorrectly takens branches. [2] Restore the damage worker until these problems have been resovled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1 Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-4-tzimmermann@suse.de (cherry picked from commit e3ddd2d25533d1cc6f9fea421e4a5f16b60b3434)
2022-11-23Revert "drm/fb-helper: Schedule deferred-I/O worker after writing to ↵Thomas Zimmermann1-8/+1
framebuffer" This reverts commit 7f5cc4a3e5e4c5a38e5748defc952e45278f7a70. Needed to restore the fbdev damage worker. There have been bug reports about locking order [1] and incorrectly takens branches. [2] Restore the damage worker until these problems have been resovled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1 Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-3-tzimmermann@suse.de (cherry picked from commit 8b83e1a455382dc667898a525a93f4eb6716cc41)
2022-11-23Revert "drm/fb-helper: Remove damage worker"Thomas Zimmermann1-0/+9
This reverts commit 27c3e9452d552ea86369a94f23287a9675f2d7a1. Needed to restore the fbdev damage worker. There have been bug reports about locking order [1] and incorrectly takens branches. [2] Restore the damage worker until these problems have been resovled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1 Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-2-tzimmermann@suse.de (cherry picked from commit 7aa3d63e1ad56c174536a5aba76d8a54c4c5acb4)
2022-11-23drm/msm/hdmi: remove unnecessary NULL checkDan Carpenter1-2/+1
This code was recently refactored in commit and now the "hdmi" pointer can't be NULL. Checking for NULL leads to a Smatch warning: drivers/gpu/drm/msm/hdmi/hdmi.c:141 msm_hdmi_init() warn: variable dereferenced before check 'hdmi' (see line 119) Fixes: 69a88d8633ec ("drm/msm/hdmi: move resource allocation to probe function") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/512163/ Link: https://lore.kernel.org/r/Y3eCqQ2pm1uQnktV@kadam Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-23Merge tag 'drm-intel-next-2022-11-18' of ↵Dave Airlie122-749/+1173
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT Changes: - gvt-next stuff mostly with refactor for the new MDEV interface. i915 Changes: - PSR fixes and improvements (Jouni) - DP DSC fixes (Vinod, Jouni) - More general display cleanups (Jani) - More display collor management cleanup targetting degamma (Ville) - remove circ_buf.h includes (Jiri) - wait power off delay at driver remove to optimize probe (Jani) - More audio cleanup targeting the ELD precompute readout (Ville) - Enable DC power states on all eDP ports (Imre) - RPL-P stepping info (Matt Atwood) - MTL enabling patches (RK) - Removal of DG2 force_probe (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
2022-11-22drm: initialize accel frameworkOded Gabbay2-35/+90
Now that we have the accel framework code ready, let's call the accel functions from all the appropriate places. These places are the drm module init/exit functions, and all the drm_minor handling functions. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22accel: add dedicated minor for accelerator devicesOded Gabbay1-1/+1
The accelerator devices are exposed to user-space using a dedicated major. In addition, they are represented in /dev with new, dedicated device char names: /dev/accel/accel*. This is done to make sure any user-space software that tries to open a graphic card won't open the accelerator device by mistake. The above implies that the minor numbering should be separated from the rest of the DRM devices. However, to avoid code duplication, we want the drm_minor structure to be able to represent the accelerator device. To achieve this, we add a new drm_minor* to drm_device that represents the accelerator device. This pointer is initialized for drivers that declare they handle compute accelerator, using a new driver feature flag called DRIVER_COMPUTE_ACCEL. It is important to note that this driver feature is mutually exclusive with DRIVER_RENDER. Devices that want to expose both graphics and compute device char files should be handled by two drivers that are connected using the auxiliary bus framework. In addition, we define a different IDR to handle the accelerators minors. This is done to make the minor's index be identical to the device index in /dev/. Any access to the IDR is done solely by functions in accel_drv.c, as the IDR is define as static. The DRM core functions call those functions in case they detect the minor's type is DRM_MINOR_ACCEL. We define a separate accel_open function (from drm_open) that the accel drivers should set as their open callback function. Both these functions eventually call the same drm_open_helper(), which had to be changed to be non-static so it can be called from accel_drv.c. accel_open() only partially duplicates drm_open as I removed some code from it that handles legacy devices. To help new drivers, I defined DEFINE_DRM_ACCEL_FOPS macro to easily set the required function operations pointers structure. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22drivers/accel: define kconfig and register a new majorOded Gabbay1-0/+1
Add a new Kconfig for the accel subsystem. The Kconfig currently contains only the basic CONFIG_DRM_ACCEL option that will be used to decide whether to compile the accel registration code. Therefore, the kconfig option is defined as bool. The accel code will be compiled as part of drm.ko and will be called directly from the DRM core code. The reason we compile it as part of drm.ko and not as a separate module is because of cyclic dependency between drm.ko and the separate module (if it would have existed). This is due to the fact that DRM core code calls accel functions and vice-versa. The accelerator devices will be exposed to the user space with a new, dedicated major number - 261. The accel init function registers the new major number as a char device and create corresponding sysfs and debugfs root entries, similar to what is done in DRM init function. I added a new header called drm_accel.h to include/drm/, that will hold the prototypes of the drm_accel.c functions. In case CONFIG_DRM_ACCEL is set to 'N', that header will contain empty inline implementations of those functions, to allow DRM core code to compile successfully without dependency on CONFIG_DRM_ACCEL. I Updated the MAINTAINERS file accordingly with the newly added folder and I have taken the liberty to appropriate the dri-devel mailing list and the dri-devel IRC channel for the accel subsystem. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-11-22Merge tag 'gvt-fixes-2022-11-11' of https://github.com/intel/gvt-linux into ↵Tvrtko Ursulin1-5/+3
drm-intel-fixes gvt-fixes-2022-11-11 - kvm reference fix from Sean Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221111090208.GQ30028@zhen-hp.sh.intel.com
2022-11-22Merge tag 'drm-intel-gt-next-2022-11-18' of ↵Dave Airlie95-629/+1022
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - Backmerge of drm-next Driver Changes: - Restore probe_range behaviour for userptr (Matt A) - Fix use-after-free on lmem_userfault_list (Matt A) - Never purge busy TTM objects (Matt A) - Meteorlake enabling (Daniele, Badal, Daniele, Stuart, Aravind, Alan) - Demote GuC kernel contexts to normal priority (John) - Use RC6 residency types as arguments to residency functions (Ashutosh, Rodrigo, Jani) - Convert some legacy DRM debugging macros to new ones (Tvrtko) - Don't deadlock GuC busyness stats vs reset (John) - Remove excessive line feeds in GuC state dumps (John) - Use i915_sg_dma_sizes() for all backends (Matt A) - Prefer REG_FIELD_GET in intel_rps_get_cagf (Ashutosh, Rodrigo) - Use GEN12_RPSTAT register for GT freq (Don, Badal, Ashutosh) - Remove unwanted TTM ghost obj check (Matt A) - Update workaround documentation (Lucas) - Coding style and static checker fixes and cleanups (Jani, Umesh, Tvrtko, Lucas, Andrzej) - Selftest improvements (Chris, Daniele, Riana, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3dMd9HDpfDehhWm@jlahtine-mobl.ger.corp.intel.com
2022-11-22Merge tag 'amd-drm-next-6.2-2022-11-18' of ↵Dave Airlie174-1642/+2670
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.2-2022-11-18: amdgpu: - SR-IOV fixes - Clean up DC checks - DCN 3.2.x fixes - DCN 3.1.x fixes - Don't enable degamma on asics which don't support it - IP discovery fixes - BACO fixes - Fix vbios allocation handling when vkms is enabled - Drop buggy tdr advanced mode GPU reset handling - Fix the build when DCN is not set in kconfig - MST DSC fixes - Userptr fixes - FRU and RAS EEPROM fixes - VCN 4.x RAS support - Aldrebaran CU occupancy reporting fix - PSP ring cleanup amdkfd: - Memory limit fix - Enable cooperative launch on gfx 10.3 amd-drm-next-6.2-2022-11-11: amdgpu: - SMU 13.x updates - GPUVM TLB race fix - DCN 3.1.4 updates - DCN 3.2.x updates - PSR fixes - Kerneldoc fix - Vega10 fan fix - GPUVM locking fixes in error pathes - BACO fix for Beige Goby - EEPROM I2C address cleanup - GFXOFF fix - Fix DC memory leak in error pathes - Flexible array updates - Mtype fix for GPUVM PTEs - Move Kconfig into amdgpu directory - SR-IOV updates - Fix possible memory leak in CS IOCTL error path amdkfd: - Fix possible memory overrun - CRIU fixes radeon: - ACPI ref count fix - HDA audio notifier support - Move Kconfig into radeon directory UAPI: - Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI. These are used internally in the driver to align location based memory coherency requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now. They are just used internally in the kernel driver for now for existing KFD memory allocations. So a change to the UAPI header, but no functional change in the UAPI. From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-22Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie10-37/+138
drm-next please pull the following etnaviv changes for the next merge window. Mostly some small workarounds to get new hardware support going. But also more fixes to the softpin MMU handling and a nice addition from Christian to make the kernel logs on hang detection more useful. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de
2022-11-22drm: rcar-du: Fix Kconfig dependency between DRM and RZG2L_MIPI_DSIBiju Das1-1/+1
When CONFIG_DRM=m and CONFIG_DRM_RZG2L_MIPI_DSI=y, it results in a build failure. This patch fixes the build issue by adding dependency to DRM. Fixes: 7a043f978ed1 ("drm: rcar-du: Add RZ/G2L DSI driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-11-22Merge tag 'drm-misc-next-2022-11-17' of ↵Dave Airlie41-198/+926
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: - fbdev: Add support for the nomodeset kernel parameter Core Changes: - client: Add kunit tests for drm_connector_pick_cmdline_mode() - dma-buf: Move dma_buf_mmap_internal() to new locking specification - edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a temporary device to load the EDID through the firmware mechanism - fb-helper: Remove damage worker - gem-vram: Fix deadlock in drm_gem_vram_vmap() - modes: Named mode parsing improvements - tests: Add Kunit helpers to create a DRM device Driver Changes: - hisilicon: convert to drm_mode_init() - malidp: Use drm-managed resources - msm: convert to drm_mode_init() and drm_mode_copy() - mtk: convert to drm_mode_init() - nouveau: Support backlight control for nva3 - rockchip: convert to drm_mode_copy() - sti: convert to drm_mode_copy() - v3d: Switch to drm-managed resources - vc4: Fix potential NULL pointer dereference - panels: - New panel: NewVision NV3051D Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
2022-11-22drm/amd/amdgpu: reserve vm invalidation engine for firmwareJack Xiao1-0/+6
If mes enabled, reserve VM invalidation engine 5 for firmware. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-22drm/amdgpu: Enable Aldebaran devices to report CU OccupancyRamesh Errabolu1-0/+1
Allow user to know number of compute units (CU) that are in use at any given moment. Enable access to the method kgd_gfx_v9_get_cu_occupancy that computes CU occupancy. Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-22drm/amdgpu: fix userptr HMM range handling v2Christian König7-51/+46
The basic problem here is that it's not allowed to page fault while holding the reservation lock. So it can happen that multiple processes try to validate an userptr at the same time. Work around that by putting the HMM range object into the mutex protected bo list for now. v2: make sure range is set to NULL in case of an error Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-22drm/amdgpu: always register an MMU notifier for userptrChristian König1-5/+3
Since switching to HMM we always need that because we no longer grab references to the pages. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-22drm/amdgpu/dm/mst: Fix uninitialized var in ↵Lyude Paul1-1/+1
pre_compute_mst_dsc_configs_for_state() Coverity noticed this one, so let's fix it. Fixes: ba891436c2d2b2 ("drm/amdgpu/mst: Stop ignoring error codes and deadlocking") Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org # v5.6+
2022-11-22drm/amdgpu/dm/dp_mst: Don't grab mst_mgr->lock when computing DSC stateLyude Paul1-4/+0
Now that we've fixed the issue with using the incorrect topology manager, we're actually grabbing the topology manager's lock - and consequently deadlocking. Luckily for us though, there's actually nothing in AMD's DSC state computation code that really should need this lock. The one exception is the mutex_lock() in dm_dp_mst_is_port_support_mode(), however we grab no locks beneath &mgr->lock there so that should be fine to leave be. Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171 Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share") Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-22drm/amdgpu/dm/mst: Use the correct topology mgr pointer in amdgpu_dm_connectorLyude Paul1-19/+18
This bug hurt me. Basically, it appears that we've been grabbing the entirely wrong mutex in the MST DSC computation code for amdgpu! While we've been grabbing: amdgpu_dm_connector->mst_mgr That's zero-initialized memory, because the only connectors we'll ever actually be doing DSC computations for are MST ports. Which have mst_mgr zero-initialized, and instead have the correct topology mgr pointer located at: amdgpu_dm_connector->mst_port->mgr; I'm a bit impressed that until now, this code has managed not to crash anyone's systems! It does seem to cause a warning in LOCKDEP though: [ 66.637670] DEBUG_LOCKS_WARN_ON(lock->magic != lock) This was causing the problems that appeared to have been introduced by: commit 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state") This wasn't actually where they came from though. Presumably, before the only thing we were doing with the topology mgr pointer was attempting to grab mst_mgr->lock. Since the above commit however, we grab much more information from mst_mgr including the atomic MST state and respective modesetting locks. This patch also implies that up until now, it's quite likely we could be susceptible to race conditions when going through the MST topology state for DSC computations since we technically will not have grabbed any lock when going through it. So, let's fix this by adjusting all the respective code paths to look at the right pointer and skip things that aren't actual MST connectors from a topology. Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171 Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share") Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-22drm/display/dp_mst: Fix drm_dp_mst_add_affected_dsc_crtcs() return codeLyude Paul1-1/+1
Looks like that we're accidentally dropping a pretty important return code here. For some reason, we just return -EINVAL if we fail to get the MST topology state. This is wrong: error codes are important and should never be squashed without being handled, which here seems to have the potential to cause a deadlock. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Fixes: 8ec046716ca8 ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs") Cc: <stable@vger.kernel.org> # v5.6+ Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-22drm/amdgpu/mst: Stop ignoring error codes and deadlockingLyude Paul3-118/+147
It appears that amdgpu makes the mistake of completely ignoring the return values from the DP MST helpers, and instead just returns a simple true/false. In this case, it seems to have come back to bite us because as a result of simply returning false from compute_mst_dsc_configs_for_state(), amdgpu had no way of telling when a deadlock happened from these helpers. This could definitely result in some kernel splats. V2: * Address Wayne's comments (fix another bunch of spots where we weren't passing down return codes) Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share") Cc: Harry Wentland <harry.wentland@amd.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-22drm/amd/display: Align dcn314_smu logging with other DCNsRoman Li1-2/+9
[Why] Assert on non-OK response from SMU is unnecessary. It was replaced with respective log message on other asics in the past with commit: "drm/amd/display: Removing assert statements for Linux" [How] Remove assert and add dbg logging as on other DCNs. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-21drm/i915: Fix warn in intel_display_power_*_domain() functionsImre Deak1-4/+4
The intel_display_power_*_domain() functions should always warn if a default domain is returned as a fallback, fix this up. Spotted by Ville. Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-2-imre.deak@intel.com (cherry picked from commit 10b85f0e1d922210ae857afed6d012ec32c4b6cb) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-11-21drm/i915/ttm: never purge busy objectsMatthew Auld1-0/+4
In i915_gem_madvise_ioctl() we immediately purge the object is not currently used, like when the mm.pages are NULL. With shmem the pages might still be hanging around or are perhaps swapped out. Similarly with ttm we might still have the pages hanging around on the ttm resource, like with lmem or shmem, but here we need to be extra careful since async unbinds are possible as well as in-progress kernel moves. In i915_ttm_purge() we expect the pipeline-gutting to nuke the ttm resource for us, however if it's busy the memory is only moved to a ghost object, which then leads to broken behaviour when for example clearing the i915_tt->filp, since the actual ttm_tt is still alive and populated, even though it's been moved to the ghost object. When we later destroy the ghost object we hit the following, since the filp is now NULL: [ +0.006982] #PF: supervisor read access in kernel mode [ +0.005149] #PF: error_code(0x0000) - not-present page [ +0.005147] PGD 11631d067 P4D 11631d067 PUD 115972067 PMD 0 [ +0.005676] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.012962] Workqueue: events ttm_device_delayed_workqueue [ttm] [ +0.006022] RIP: 0010:i915_ttm_tt_unpopulate+0x3a/0x70 [i915] [ +0.005879] Code: 89 fb 48 85 f6 74 11 8b 55 4c 48 8b 7d 30 45 31 c0 31 c9 e8 18 6a e5 e0 80 7d 60 00 74 20 48 8b 45 68 8b 55 08 4c 89 e7 5b 5d <48> 8b 40 20 83 e2 01 41 5c 89 d1 48 8b 70 30 e9 42 b2 ff ff 4c 89 [ +0.018782] RSP: 0000:ffffc9000bf6fd70 EFLAGS: 00010202 [ +0.005244] RAX: 0000000000000000 RBX: ffff8883e12ae380 RCX: 0000000000000000 [ +0.007150] RDX: 000000008000000e RSI: ffffffff823559b4 RDI: ffff8883e12ae3c0 [ +0.007142] RBP: ffff888103b65d48 R08: 0000000000000001 R09: 0000000000000001 [ +0.007144] R10: 0000000000000001 R11: ffff88829c2c8040 R12: ffff8883e12ae3c0 [ +0.007148] R13: 0000000000000001 R14: ffff888115184140 R15: ffff888115184248 [ +0.007154] FS: 0000000000000000(0000) GS:ffff88844db00000(0000) knlGS:0000000000000000 [ +0.008108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.005763] CR2: 0000000000000020 CR3: 000000013fdb4004 CR4: 00000000003706e0 [ +0.007152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.007145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.007154] Call Trace: [ +0.002459] <TASK> [ +0.002126] ttm_tt_unpopulate.part.0+0x17/0x70 [ttm] [ +0.005068] ttm_bo_tt_destroy+0x1c/0x50 [ttm] [ +0.004464] ttm_bo_cleanup_memtype_use+0x25/0x40 [ttm] [ +0.005244] ttm_bo_cleanup_refs+0x90/0x2c0 [ttm] [ +0.004721] ttm_bo_delayed_delete+0x235/0x250 [ttm] [ +0.004981] ttm_device_delayed_workqueue+0x13/0x40 [ttm] [ +0.005422] process_one_work+0x248/0x560 [ +0.004028] worker_thread+0x4b/0x390 [ +0.003682] ? process_one_work+0x560/0x560 [ +0.004199] kthread+0xeb/0x120 [ +0.003163] ? kthread_complete_and_exit+0x20/0x20 [ +0.004815] ret_from_fork+0x1f/0x30 v2: - Just use ttm_bo_wait() directly (Niranjana) - Add testcase reference Testcase: igt@gem_madvise@dontneed-evict-race Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend") Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Acked-by: Nirmoy Das <Nirmoy.Das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221115104620.120432-1-matthew.auld@intel.com (cherry picked from commit 5524b5e52e08f675116a93296fe5bee60bc43c03) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-11-18drm/i915/dg2: Drop force_probe requirementMatt Roper1-1/+0
DG2 has been very usable for a while now, and all of the uapi changes related to fundamental platform usage have been finalized. Recent CI results have also been healthy, so we're ready to drop the force_probe requirement and enable the platform by default. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109001328.732000-1-matthew.d.roper@intel.com
2022-11-18Merge tag 'drm/tegra/for-6.1-rc6' of ↵Dave Airlie2-0/+8
https://gitlab.freedesktop.org/drm/tegra into drm-fixes drm/tegra: Fixes for v6.1-rc6 This contains a single fix that avoids using the GART on Tegra20 because it doesn't work well with the way the Tegra DRM driver tries to use it. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118121614.3511110-1-thierry.reding@gmail.com
2022-11-18drm/i915/mtl: Skip doubling channel numbers for LPDDR4/LPDDDR5Radhakrishna Sripada1-1/+2
MTL LPDDR5 reported 16b with 8 channels. Previous platforms reported 32b with 4 channels and hence needed a multiplication by a factor of 2. Skip increasing the channels for MTL. v2: Use version check instead of platform check(MattR) Bspec: 64631 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117213015.584417-2-radhakrishna.sripada@intel.com
2022-11-18drm/i915/mtl: Fix dram info readoutRadhakrishna Sripada1-2/+1
MEM_SS_INFO_GLOBAL Register info read from the hardware is cached in val. However the variable is being modified when determining the DRAM type thereby clearing out the channels and qgv info extracted later in the function xelpdp_get_dram_info. Preserve the register value and use extracted fields in the switch statement. Fixes: 825477e77912 ("drm/i915/mtl: Obtain SAGV values from MMIO instead of GT pcode mailbox") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117213015.584417-1-radhakrishna.sripada@intel.com
2022-11-18drm/amdgpu: handle gang submit before VMIDChristian König1-3/+3
Otherwise it can happen that not all gang members can get a VMID assigned and we deadlock. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Timur Kristóf <timur.kristof@gmail.com> Fixes: 68ce8b242242 ("drm/amdgpu: add gang submit backend v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118153023.312582-1-christian.koenig@amd.com
2022-11-18drm/i915/rpl-p: Add stepping infoMatt Atwood1-0/+7
Add stepping-substepping info in accordance to bpsec changes. Bspec: 55376 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117214132.152061-1-matthew.s.atwood@intel.com
2022-11-18drm/i915/mtl+: Don't enable the AUX_IO power for non-eDP port main linksImre Deak1-2/+3
MTL+ requires the AUX_IO power for the main link only on eDP, so don't enable it in other cases. v2: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-10-imre.deak@intel.com
2022-11-18drm/i915: Factor out function to get/put AUX_IO power for main linkImre Deak1-33/+52
Factor out functions to get/put the AUX_IO power domain for the main link on DDI ports. While at it clarify the corresponding code comment. No functional change. v2: - s/(get/put)_aux_power_for_main_link/main_link_aux_power_domain_(get/put) (Jani) - Clarify in the code comment that AUX_IO is needed only by TypeC besides eDP/PSR. v3: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. v4: - Don't call fetch_and_zero() with side-effect during variable declaration. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-9-imre.deak@intel.com
2022-11-18drm/i915: Add missing DC_OFF power domain->well mappingsImre Deak1-0/+8
Add the missing DC_OFF power domain -> DC_OFF power well mappings on all platforms. This didn't cause a problem as the DC_OFF power domain is only used on JSL, where the mapping was already correct. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-8-imre.deak@intel.com
2022-11-18drm/i915: Add missing AUX_IO_A power domain->well mappingsImre Deak1-0/+2
BXT and GLK were missing the AUX_IO_A power domain -> PHY A common power well mapping, add these now. This didn't cause a problem as the AUX_IO_A and DDI_LANES_A power domains are acquired together. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-7-imre.deak@intel.com
2022-11-18drm/i915/tgl+: Enable display DC power states on all eDP portsImre Deak4-7/+89
Starting with TGL eDP is supported on ports B+ (besides port A), so make sure DC states are not blocked on any such ports. For this add an AUX_IO_<port> power domain for each port with eDP support. These domains similarly to AUX_IO_A enable only the AUX_IO_<port> power well for an enabled port, whereas the existing AUX_<port> domains enable both the AUX_IO_<port> and the DC_OFF power wells as required by DP AUX transfers. v2: (Ville) - Split the change using AUX vs. AUX_IO on port A to a separate patch. - Select AUX_IO vs. AUX based on crtc_state->has_psr instead of is_edp(). v3: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. v4: - Fix warn in intel_display_power_aux_io_domain(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-6-imre.deak@intel.com
2022-11-18drm/i915: Use the AUX_IO power domain only for eDP/PSR portImre Deak1-2/+4
Use the AUX_IO_A display power domain only for eDP on port A where PSR is also supported. This is the case where DC states need to be enabled while the output is enabled - ensured by AUX_IO_A domain not enabling the DC_OFF power well. Otherwise port A can be treated the same way as other ports with an external DP output: using the AUX_<port> domain which disables the unrequired DC states. This change prepares for the next patch enabling DC states on all ports supporting eDP/PSR besides port A. v2: - Check the encoder PSR capability instead of PSR being enabled in the crtc_state, as the latter can be changed with a fastset. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-5-imre.deak@intel.com
2022-11-18drm/i915: Move the POWER_DOMAIN_AUX_IO_A definition to its logical placeImre Deak3-7/+8
Move the definition of the AUX_IO_A power domain, requiring only the corresponding AUX_IO_A power well to be enabled, before all the AUX_<port> power domains, which require both the AUX_IO_<port> and the DC_OFF power wells to be enabled. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-4-imre.deak@intel.com
2022-11-18drm/i915: Preallocate the debug power domain wakerefs arrayImre Deak2-6/+6
Since the current size of intel_display_power_domain_set struct is close to 1kB, it's better to use preallocated memory for it. The only user of the intel_display_power_get/put_in_set() allocating the struct on stack is hsw_get_pipe_config(), so we can avoid potential stack overallocations by moving the struct here to the preallocated intel_crtc struct (hsw_get_pipe_config() is non-reentrant wrt. each CRTC). This patch replaces https://lore.kernel.org/intel-gfx/20221107170917.3566758-5-imre.deak@intel.com/T/#md3f6cdf17fcd Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-3-imre.deak@intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 04:52:23 +0300