| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
H264 supports 4096x4096 starting from Polaris.
HEVC also supports 4096x4096, with VCN 3 and newer 8192x4352
is supported.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 69e9a9e65b1ea542d07e3fdd4222b46e9f5a3a29)
Cc: stable@vger.kernel.org
|
|
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7e381b1ccd5e778e3d9c44c669ad38439a861d8)
Cc: stable@vger.kernel.org
|
|
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 003215f962cdf2265f126a3f4c9ad20917f87fca)
Cc: stable@vger.kernel.org
|
|
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c)
Cc: stable@vger.kernel.org
|
|
[Why]
In certain use case such as KDE login screen, there will be no atomic
commit while do the frame update.
If the Panel Replay enabled, it will cause the screen not updated and
looks like system hang.
[How]
Delay few atomic commits before enabled the Panel Replay just like PSR.
Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682
Tested-By: Corey Hickey <bugfood-c@fatooh.org>
Tested-By: James Courtier-Dutton <james.dutton@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ca628f0eddd73adfccfcc06b2a55d915bca4a342)
Cc: stable@vger.kernel.org # 6.11+
|
|
Panel Replay feature may also use the same variable with PSR.
Change the variable name and make it not specify for PSR.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7fafb7a46b38a11a19342d153f505749bf56f3e)
Cc: stable@vger.kernel.org # 6.11+
|
|
Support for per-process page tables requires the SMMU aparture to be
setup such that the GPU can make updates with the SMMU. On some targets
this is done statically in firmware, on others it's expected to be
requested in runtime by the driver, through a SCM call.
One place where configuration is expected to be done dynamically is the
QCS6490 rb3gen2.
The downstream driver does this unconditioanlly on any A6xx and newer,
so follow suite and make the call.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20241110-adreno-smmu-aparture-v2-2-9b1fb2ee41d4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Correct kiq unmap queue timeout value.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add vcn and jpeg error count parsing.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
New features require the new fields defines
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add back kfd queues in start scheduling that originally been
removed on stop scheduling.
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kfd process kref count(process->ref) is initialized to 1 by kref_init. After
it is created not need to increase its kref. Instad add kfd process kref at kfd
process mmu notifier allocation since we already decrease the kref at
free_notifier of mmu_notifier_ops, so pair them.
When user process opens kfd node multiple times the kfd process kref is
increased each time to balance with kfd node close operation.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Improves the coding style by updating bit-shift
operations in the amdgpu_jpeg.c driver file.
It ensures consistency and avoids potential issues
by explicitly using 1U and 1ULL for unsigned
and unsigned long long shifts in all relevant instances.
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES internal scratch data is useful for mes debug, it can only located
in VRAM, change the allocation type and increase size for mes 11
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable RAS late init if VF RAS Telemetry is supported.
When enabled, the VF can use this interface to query total
RAS error counts from the host.
The VF FB access may abruptly end due to a fatal error,
therefore the VF must cache and sanitize the input.
The Host allows 15 Telemetry messages every 60 seconds, afterwhich
the host will ignore any more in-coming telemetry messages. The VF will
rate limit its msg calling to once every 5 seconds (12 times in 60 seconds).
While the VF is rate limited, it will continue to report the last
good cached data.
v2: Flip generate report & update statistics order for VF
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If VF RAS Capability support is enabled, guest is able to
retrieve the real RAS support from the host.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add message handlers for RAS telemetry.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The SRIOV PF/VF Data exchange is extended by 64KB for VF RAS Telemetry data.
Add Host RAS Telemetry enable capabilities bitfields.
Add a new VF msg REQ_RAS_ERROR_COUNT, the host response data will be populated
in the RAS Telemetry region.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- DML2 fixes
- DP fixes
- DPMS fix
- HPD fixes
- Misc cleanup
- ODM fix
- Replay fix
- SPL fix
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes a legacy debug_defaults_diags struct.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Backmerging to get fixes from v6.12-rc7.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
UAPI Changes:
- Add 1X7X5 media-bus formats.
Cross-subsystem Changes:
- Maintainer updates for VKMS and IT6263.
- Add media-bus-fmt for MEDIA_BUS_FMT_RGB101010_1X7X5_*.
- Add IT6263 DT bindings and driver.
Core Changes:
- Add ABGR210101010 support to panic handler.
- Use ATOMIC64_INIT in drm_file.c
- Improve scheduler teardown documentation.
Driver Changes:
- Make mediatek compile on ARM again.
- Add missing drm/drm_bridge.h header include, already in drm-next.
- Small fixes and cleanups to vkms, bridge/it6505, panfrost, panthor.
- Add panic support to nouveau for nv50+.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/344afe41-d27b-408a-8542-bfecfd3555f6@linux.intel.com
|
|
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077)
Fixes: 5ddb0bd4ddc3 ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021072818.61621-1-andyshrk@163.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix ccs_mode setting for Xe2 and later (Balasubramani)
- Synchronize ccs_mode setting with client creation (Balasubramani)
- Apply scheduling WA for LNL in additional places as needed
(Nirmoy)
- Fix leak and lock handling in error paths of xe_exec ioctl
(Matthew Brost)
- Fix GGTT allocation leak leading to eventual crash in SR-IOV
(Michal Wajdeczko)
- Move run_ticks update out of job handling to avoid synchronization
with reader (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ffcebtluaaaohquxfyf5babpihmtscxwad3jjmt5nggwh2xpm@ztw67ucywttg
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
imagination:
- Track PVR context per file
- Break ref-counting cycle
panel-orientation-quirks:
- Fix matching Lenovo Yoga Tab 3 X90F
panthor:
- Lock VM array
- Be strict about I/O mapping flags
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108085058.GA37468@linux.fritz.box
|
|
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If driver allocated region6 size is not same as the size in firmware,
dmcub won't enable region6.
[How]
Use region6 size in dmcub_fw_meta instead of a constant value.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT displays Dmesg warnings which are likely false
[How]
Disabling p-state checks leading to this warning for DCN31 and DCN314
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Emily Nie <Emily.Nie@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Garbage will show due to dig is on. So blank stream needed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Need a flag to force MST blocked discovery for certain branch devices.
[How]
Added a flag to force MST blocked discovery in struct dc_panel_patch.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In certain use case such as KDE login screen, there will be no atomic
commit while do the frame update.
If the Panel Replay enabled, it will cause the screen not updated and
looks like system hang.
[How]
Delay few atomic commits before enabled the Panel Replay just like PSR.
Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682
Tested-By: Corey Hickey <bugfood-c@fatooh.org>
Tested-By: James Courtier-Dutton <james.dutton@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Panel Replay feature may also use the same variable with PSR.
Change the variable name and make it not specify for PSR.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
String literals must be assigned to const char pointers.
[How]
By adding const keyword to fix compilation errors.
Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX11.0.0/11.0.2 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.0.0/11.0.2 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In kfd_procfs_show(), the sdma_activity_work_handler is a local variable
and the sdma_activity_work_handler.sdma_activity_work should initialize
with INIT_WORK_ONSTACK() instead of INIT_WORK().
Fixes: 32cb59f31362 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The coherency flags can only be determined when the BO is locked and that
in turn is only guaranteed when the mapping is validated.
Fix the check, move the resource check into the function and add an assert
that the BO is locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: d1a372af1c3d ("drm/amdgpu: Set MTYPE in PTE based on BO flags")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, the pp_dpm_mclk values are reported in descending order
on SMU IP v14.0.0/1/4. Adjust to ascending order for consistency
with other clock interfaces.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Raise an info message in kernel log if PCIe root complex
determines that a AMD GPU device D<i> cannot have P2P
communication with another AMD GPU device D<j>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
H264 supports 4096x4096 starting from Polaris.
HEVC also supports 4096x4096, with VCN 3 and newer 8192x4352
is supported.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the sysfs interface for jpeg:
jpeg_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the sysfs interface for vpe:
vpe_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the sysfs interface for sdma:
sdma_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remote access to external AIDs isn't possible with VCN RRMT disabled
and it is disabled on SoCs with GC 9.4.4, so use only local offsets.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reset sequence indicates that hardware already ran into a bad state.
Avoid sending unmap queue request to reset KCQ. This will also cover RAS
error scenarios which need a reset to recover, hence remove the check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In current logic, it calls ring_alloc followed by a ring_test. ring_test
in turn will call another ring_alloc. This is illegal usage as a
ring_alloc is expected to be closed properly with a ring_commit. Change
to commit the map/unmap queue packet first followed by a ring_test. Add a
comment about the usage of ring_test.
Also, reorder the current pre-condition checks of job hang or kiq ring
scheduler not ready. Without them being met, it is not useful to attempt
ring or memory allocations.
Fixes tag refers to the original patch which introduced this issue which
then got carried over into newer code.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 6c10b5cc4eaa ("drm/amdgpu: Remove duplicate code in gfx_v8_0.c")
|
