| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As the hw supports up to 4 surfaces, increase the maximum number of
surfaces to prevent the DC error when trying to use more than three
planes.
[drm:dc_state_add_plane [amdgpu]] *ERROR* Surface: can not attach plane_state 000000003e2cb82c! Maximum is: 3
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b8d6daffc871a42026c3c20bff7b8fa0302298c1)
Cc: stable@vger.kernel.org
|
|
DC driver is using two different values to define the maximum number of
surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as
the unique definition for surface updates across DC.
It fixes page fault faced by Cosmic users on AMD display versions that
support two overlay planes, since the introduction of cursor overlay
mode.
[Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b
[ +0.000015] #PF: supervisor read access in kernel mode
[ +0.000006] #PF: error_code(0x0000) - not-present page
[ +0.000005] PGD 0 P4D 0
[ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300
[ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper]
[ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu]
[ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b
[ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206
[ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070
[ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000
[ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000
[ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000
[ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000
[ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000
[ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0
[ +0.000005] Call Trace:
[ +0.000011] <TASK>
[ +0.000010] ? __die_body.cold+0x19/0x27
[ +0.000012] ? page_fault_oops+0x15a/0x2d0
[ +0.000014] ? exc_page_fault+0x7e/0x180
[ +0.000009] ? asm_exc_page_fault+0x26/0x30
[ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu]
[ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu]
[ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu]
[ +0.000450] ? srso_return_thunk+0x5/0x5f
[ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu]
[ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu]
[ +0.000464] ? srso_return_thunk+0x5/0x5f
[ +0.000009] ? sort+0x31/0x50
[ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu]
[ +0.000508] ? srso_return_thunk+0x5/0x5f
[ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu]
[ +0.000377] ? srso_return_thunk+0x5/0x5f
[ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm]
[ +0.000058] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? dma_fence_default_wait+0x8c/0x260
[ +0.000010] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? wait_for_completion_timeout+0x13b/0x170
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? dma_fence_wait_timeout+0x108/0x140
[ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper]
[ +0.000024] ? process_one_work+0x177/0x330
[ +0.000008] ? worker_thread+0x266/0x3a0
[ +0.000006] ? __pfx_worker_thread+0x10/0x10
[ +0.000004] ? kthread+0xd2/0x100
[ +0.000006] ? __pfx_kthread+0x10/0x10
[ +0.000006] ? ret_from_fork+0x34/0x50
[ +0.000004] ? __pfx_kthread+0x10/0x10
[ +0.000005] ? ret_from_fork_asm+0x1a/0x30
[ +0.000011] </TASK>
Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode")
Suggested-by: Leo Li <sunpeng.li@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7)
Cc: stable@vger.kernel.org
|
|
[WHY & HOW]
commit 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts")
lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank,
and amdgpu_irq_get/put do not need to be called here. Part of that
patch got lost somehow, so fix it up.
Fixes: 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3782305ce5807c18fbf092124b9e8303cf1723ae)
Cc: stable@vger.kernel.org
|
|
Delete one line break to make the format correct, resolving the
following warning during a W=1 build:
>> drivers/gpu/drm/tests/drm_kunit_helpers.c:324: warning: bad line: for a KUnit test
Fixes: caa714f86699 ("drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501032001.O6WY1VCW-lkp@intel.com/
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104165134.1695864-1-eleanor15x@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The struct device_node *next pointer is not initialized, and it is
used in an error path in which it may have never been modified by
function mtk_drm_of_get_ddp_ep_cid().
Since the error path is relying on that pointer being NULL for the
OVL Adaptor and/or invalid component check and since said pointer
is being used in prints for %pOF, in the case that it points to a
bogus address, the print may cause a KP.
To resolve that, initialize the *next pointer to NULL before usage.
Fixes: 4c932840db1d ("drm/mediatek: Implement OF graphs support for display paths")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/633f3c6d-d09f-447c-95f1-dfb4114c50e6@stanley.mountain/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241112105030.93337-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Check the return value of drm_dp_dpcd_readb() to confirm that
AUX communication is successful. To simplify the code, replace
drm_dp_dpcd_readb() and DP_GET_SINK_COUNT() with drm_dp_read_sink_count().
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218113448.2992-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- A couple of OA fixes squashed for stable backporting (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z3bur0RmH6-70YSh@fedora
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13-rc6:
- Only fixes for adv7511 driver, including a use-after-free.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f58429b7-5f11-4b78-b577-de32b41299ea@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix C10 pll programming sequence [cx0_phy] (Suraj Kandpal)
- Fix power gate sequence. [dg1] (Rodrigo Vivi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z2wKf7tmElKFdnoP@linux
|
|
This is a set of squashed commits to facilitate smooth applying to
stable. Each commit message is retained for reference.
1) Allow a GGTT mapped batch to be submitted to user exec queue
For a OA use case, one of the HW registers needs to be modified by
submitting an MI_LOAD_REGISTER_IMM command to the users exec queue, so
that the register is modified in the user's hardware context. In order
to do this a batch that is mapped in GGTT, needs to be submitted to the
user exec queue. Since all user submissions use q->vm and hence PPGTT,
add some plumbing to enable submission of batches mapped in GGTT.
v2: ggtt is zero-initialized, so no need to set it false (Matt Brost)
2) xe/oa: Use MI_LOAD_REGISTER_IMMEDIATE to enable OAR/OAC
To enable OAR/OAC, a bit in RING_CONTEXT_CONTROL needs to be set.
Setting this bit cause the context image size to change and if not done
correct, can cause undesired hangs.
Current code uses a separate exec_queue to modify this bit and is
error-prone. As per HW recommendation, submit MI_LOAD_REGISTER_IMM to
the target hardware context to modify the relevant bit.
In v2 version, an attempt to submit everything to the user-queue was
made, but it failed the unprivileged-single-ctx-counters test. It
appears that the OACTXCONTROL must be modified from a remote context.
In v3 version, all context specific register configurations were moved
to use LOAD_REGISTER_IMMEDIATE and that seems to work well. This is a
cleaner way, since we can now submit all configuration to user
exec_queue and the fence handling is simplified.
v2:
(Matt)
- set job->ggtt to true if create job is successful
- unlock vm on job error
(Ashutosh)
- don't wait on job submission
- use kernel exec queue where possible
v3:
(Ashutosh)
- Fix checkpatch issues
- Remove extra spaces/new-lines
- Add Fixes: and Cc: tags
- Reset context control bit when OA stream is closed
- Submit all config via MI_LOAD_REGISTER_IMMEDIATE
(Umesh)
- Update commit message for v3 experiment
- Squash patches for easier port to stable
v4:
(Ashutosh)
- No need to pass q to xe_oa_submit_bb
- Do not support exec queues with width > 1
- Fix disabling of CTX_CTRL_OAC_CONTEXT_ENABLE
v5:
(Ashutosh)
- Drop reg_lri related comments
- Use XE_OA_SUBMIT_NO_DEPS in xe_oa_load_with_lri
Fixes: 8135f1c09dd2 ("drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> # commit 1
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220171919.571528-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 55039832f98c7e05f1cf9e0d8c12b2490abd0f16)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
cocci warnings: (new ones prefixed by >>)
>> drivers/gpu/drm/mediatek/mtk_drm_drv.c:1092:2-3: Unneeded semicolon
Fixes: 4c932840db1d ("drm/mediatek: Implement OF graphs support for display paths")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412022048.kY2ZhxZ4-lkp@intel.com/
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241230135314.5419-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Registers DSI_VM_CMD and DSI_SHADOW_DEBUG start at different
addresses in both MT8186 and MT8188 compared to the older IPs.
Add two members in struct mtk_dsi_driver_data to specify the
offsets for these two registers on a per-SoC basis, then do
specify those in all of the currently present SoC driver data.
This fixes writes to the Video Mode Command Packet Control
register, fixing enablement of command packet transmission
(VM_CMD_EN) and allowance of this transmission during the
VFP period (TS_VFP_EN) on both MT8186 and MT8188.
Fixes: 03d7adc41027 ("drm/mediatek: Add mt8186 dsi compatible to mtk_dsi.c")
Fixes: 814d5341f314 ("drm/mediatek: Add mt8188 dsi compatible to mtk_dsi.c")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241219112733.47907-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Fix dp mode valid issue to avoid abnormal display of limit state.
After DP passes link training, it can express the lane count of the
current link status is good. Calculate the maximum bandwidth supported
by DP using the current lane count.
The color format will select the best one based on the bandwidth
requirements of the current timing mode. If the current timing mode
uses RGB and meets the DP link bandwidth requirements, RGB will be used.
If the timing mode uses RGB but does not meet the DP link bandwidthi
requirements, it will continue to check whether YUV422 meets
the DP link bandwidth.
FEC overhead is approximately 2.4% from DP 1.4a spec 2.2.1.4.2.
The down-spread amplitude shall either be disabled (0.0%) or up
to 0.5% from 1.4a 3.5.2.6. Add up to approximately 3% total overhead.
Because rate is already divided by 10,
mode->clock does not need to be multiplied by 10.
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241025083036.8829-3-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Setting up misc0 for Pixel Encoding Format.
According to the definition of YCbCr in spec 1.2a Table 2-96,
0x1 << 1 should be written to the register.
Use switch case to distinguish RGB, YCbCr422,
and unsupported color formats.
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241025083036.8829-2-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
This reverts commit fd620fc25d88a1e490eaa9f72bc31962be1b4741.
Boot failures reported by
KernelCI:
[ 4.395400] mediatek-drm mediatek-drm.5.auto: bound 1c014000.merge (ops 0xffffd35fd12975f8)
[ 4.396155] mediatek-drm mediatek-drm.5.auto: bound 1c000000.ovl (ops 0xffffd35fd12977b8)
[ 4.411951] mediatek-drm mediatek-drm.5.auto: bound 1c002000.rdma (ops 0xffffd35fd12989c0)
[ 4.536837] mediatek-drm mediatek-drm.5.auto: bound 1c004000.ccorr (ops 0xffffd35fd1296cf0)
[ 4.545181] mediatek-drm mediatek-drm.5.auto: bound 1c005000.aal (ops 0xffffd35fd1296a80)
[ 4.553344] mediatek-drm mediatek-drm.5.auto: bound 1c006000.gamma (ops 0xffffd35fd12972b0)
[ 4.561680] mediatek-drm mediatek-drm.5.auto: bound 1c014000.merge (ops 0xffffd35fd12975f8)
[ 4.570025] ------------[ cut here ]------------
[ 4.574630] refcount_t: underflow; use-after-free.
[ 4.579416] WARNING: CPU: 6 PID: 81 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148
[ 4.587670] Modules linked in:
[ 4.590714] CPU: 6 UID: 0 PID: 81 Comm: kworker/u32:3 Tainted: G W 6.12.0 #1 cab58e2e59020ebd4be8ada89a65f465a316c742
[ 4.602695] Tainted: [W]=WARN
[ 4.605649] Hardware name: Acer Tomato (rev2) board (DT)
[ 4.610947] Workqueue: events_unbound deferred_probe_work_func
[ 4.616768] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.623715] pc : refcount_warn_saturate+0xf4/0x148
[ 4.628493] lr : refcount_warn_saturate+0xf4/0x148
[ 4.633270] sp : ffff8000807639c0
[ 4.636571] x29: ffff8000807639c0 x28: ffff34ff4116c640 x27: ffff34ff4368e080
[ 4.643693] x26: ffffd35fd1299ac8 x25: ffff34ff46c8c410 x24: 0000000000000000
[ 4.650814] x23: ffff34ff4368e080 x22: 00000000fffffdfb x21: 0000000000000002
[ 4.657934] x20: ffff34ff470c6000 x19: ffff34ff410c7c10 x18: 0000000000000006
[ 4.665055] x17: 666678302073706f x16: 2820656772656d2e x15: ffff800080763440
[ 4.672176] x14: 0000000000000000 x13: 2e656572662d7265 x12: ffffd35fd2ed14f0
[ 4.679297] x11: 0000000000000001 x10: 0000000000000001 x9 : ffffd35fd0342150
[ 4.686418] x8 : c0000000ffffdfff x7 : ffffd35fd2e21450 x6 : 00000000000affa8
[ 4.693539] x5 : ffffd35fd2ed1498 x4 : 0000000000000000 x3 : 0000000000000000
[ 4.700660] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff34ff40932580
[ 4.707781] Call trace:
[ 4.710216] refcount_warn_saturate+0xf4/0x148 (P)
[ 4.714993] refcount_warn_saturate+0xf4/0x148 (L)
[ 4.719772] kobject_put+0x110/0x118
[ 4.723335] put_device+0x1c/0x38
[ 4.726638] mtk_drm_bind+0x294/0x5c0
[ 4.730289] try_to_bring_up_aggregate_device+0x16c/0x1e0
[ 4.735673] __component_add+0xbc/0x1c0
[ 4.739495] component_add+0x1c/0x30
[ 4.743058] mtk_disp_rdma_probe+0x140/0x210
[ 4.747314] platform_probe+0x70/0xd0
[ 4.750964] really_probe+0xc4/0x2a8
[ 4.754527] __driver_probe_device+0x80/0x140
[ 4.758870] driver_probe_device+0x44/0x120
[ 4.763040] __device_attach_driver+0xc0/0x108
[ 4.767470] bus_for_each_drv+0x8c/0xf0
[ 4.771294] __device_attach+0xa4/0x198
[ 4.775117] device_initial_probe+0x1c/0x30
[ 4.779286] bus_probe_device+0xb4/0xc0
[ 4.783109] deferred_probe_work_func+0xb0/0x100
[ 4.787714] process_one_work+0x18c/0x420
[ 4.791712] worker_thread+0x30c/0x418
[ 4.795449] kthread+0x128/0x138
[ 4.798665] ret_from_fork+0x10/0x20
[ 4.802229] ---[ end trace 0000000000000000 ]---
Fixes: fd620fc25d88 ("drm/mediatek: Switch to for_each_child_of_node_scoped()")
Cc: stable@vger.kernel.org
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/lkml/Z0lNHdwQ3rODHQ2c@sashalap/T/#mfaa6343cfd4d59aae5912b095c0693c0553e746c
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241223151218.7958-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The PHY portion of the mediatek hdmi driver was originally part of
the driver it self and later split out into drivers/phy, which a
'select' to keep the prior behavior.
However, this leads to build failures when the PHY driver cannot
be built:
WARNING: unmet direct dependencies detected for PHY_MTK_HDMI
Depends on [n]: (ARCH_MEDIATEK || COMPILE_TEST [=y]) && COMMON_CLK [=y] && OF [=y] && REGULATOR [=n]
Selected by [m]:
- DRM_MEDIATEK_HDMI [=m] && HAS_IOMEM [=y] && DRM [=m] && DRM_MEDIATEK [=m]
ERROR: modpost: "devm_regulator_register" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
ERROR: modpost: "rdev_get_drvdata" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
The best option here is to just not select the phy driver and leave that
up to the defconfig. Do the same for the other PHY and memory drivers
selected here as well for consistency.
Fixes: a481bf2f0ca4 ("drm/mediatek: Separate mtk_hdmi_phy to an independent module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218085837.2670434-1-arnd@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mediatek-drm driver reported the capability of 180-degree rotation by
adding `DRM_MODE_ROTATE_180` to the plane property, as flip-x combined
with flip-y equals a 180-degree rotation. However, we did not handle
the rotation property in the driver and lead to rotation issues.
Fixes: 74608d8feefd ("drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241118025126.30808-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Touching DISP_REG_OVL_PITCH_MSB leads to video overlay on MT2701, MT7623N
and probably other older SoCs being broken.
Move setting up AFBC layer configuration into a separate function only
being called on hardware which actually supports AFBC which restores the
behavior as it was before commit c410fa9b07c3 ("drm/mediatek: Add AFBC
support to Mediatek DRM driver") on non-AFBC hardware.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/c7fbd3c3e633c0b7dd6d1cd78ccbdded31e1ca0f.1734397800.git.daniel@makrotopia.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mtk_crtc_finish_page_flip() is used to notify userspace that a
page flip has been completed, allowing userspace to free the frame
buffer of the last frame and commit the next frame.
In MediaTek's hardware design for configuring display hardware by using
GCE, `DRM_EVENT_FLIP_COMPLETE` should be notified to userspace after
GCE has finished configuring all display hardware settings for each
atomic_commit().
Currently, mtk_crtc_finish_page_flip() cannot guarantee that GCE has
configured all the display hardware settings of the last frame.
Therefore, to increase the accuracy of the timing for notifying
`DRM_EVENT_FLIP_COMPLETE` to userspace, mtk_crtc_finish_page_flip()
should be moved to ddp_cmdq_cb().
Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241211034716.29241-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
returns err
The pointer need to be set to NULL, otherwise KASAN complains about
use-after-free. Because in mtk_drm_bind, all private's drm are set
as follows.
private->all_drm_private[i]->drm = drm;
And drm will be released by drm_dev_put in case mtk_drm_kms_init returns
failure. However, the shutdown path still accesses the previous allocated
memory in drm_atomic_helper_shutdown.
[ 84.874820] watchdog: watchdog0: watchdog did not stop!
[ 86.512054] ==================================================================
[ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378
[ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1
[ 86.515213]
[ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55
[ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022
[ 86.517960] Call trace:
[ 86.518333] show_stack+0x20/0x38 (C)
[ 86.518891] dump_stack_lvl+0x90/0xd0
[ 86.519443] print_report+0xf8/0x5b0
[ 86.519985] kasan_report+0xb4/0x100
[ 86.520526] __asan_report_load8_noabort+0x20/0x30
[ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378
[ 86.521966] mtk_drm_shutdown+0x54/0x80
[ 86.522546] platform_shutdown+0x64/0x90
[ 86.523137] device_shutdown+0x260/0x5b8
[ 86.523728] kernel_restart+0x78/0xf0
[ 86.524282] __do_sys_reboot+0x258/0x2f0
[ 86.524871] __arm64_sys_reboot+0x90/0xd8
[ 86.525473] invoke_syscall+0x74/0x268
[ 86.526041] el0_svc_common.constprop.0+0xb0/0x240
[ 86.526751] do_el0_svc+0x4c/0x70
[ 86.527251] el0_svc+0x4c/0xc0
[ 86.527719] el0t_64_sync_handler+0x144/0x168
[ 86.528367] el0t_64_sync+0x198/0x1a0
[ 86.528920]
[ 86.529157] The buggy address belongs to the physical page:
[ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc
[ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff)
[ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000
[ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000
[ 86.534511] page dumped because: kasan: bad access detected
[ 86.535323]
[ 86.535559] Memory state around the buggy address:
[ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.544733] ^
[ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.563928] ==================================================================
[ 86.571093] Disabling lock debugging due to kernel taint
[ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b
[ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f]
...
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241223023227.1258112-1-guoqing.jiang@canonical.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
sub-pipe PG is not present on DG1. Setting these bits can disable
other power gates and cause GPU hangs on video playbacks.
VLK: 16314, 4304
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381
Fixes: 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
According to spec VDR_CUSTOM_WIDTH register gets programmed after pll
specific VDR registers and TX Lane programming registers are done.
Moreover we only program into C10_VDR_CONTROL1 to update config and
setup master lane once all VDR registers are written into.
Bspec: 67636
Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com
(cherry picked from commit f9d418552ba1e3a0e92487ff82eb515dab7516c0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
Fixes: 514447a12190 ("drm/xe: Stop accumulating LRC timestamp on job_free")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3421
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218053122.2730195-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a typo in function call and instead of VF LMEM we were
looking at VF GGTT provisioning. Fix that.
Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216223253.819-1-michal.wajdeczko@intel.com
(cherry picked from commit a8d0aa0e7fcd20c9f1992688c0f0d07a68287403)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix a potential GPU page fault during tt -> system moves by waiting for
migration jobs to complete before unmapping SG. This ensures that IOMMU
mappings are not prematurely torn down while a migration job is still in
progress.
v2: Use intr=false(Matt A)
v3: Update commit message(Matt A)
v4: s/DMA_RESV_USAGE_BOOKKEEP/DMA_RESV_USAGE_KERNEL(Thomas)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3466
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-2-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit cda06412c06893a6f07a2fbf89d42a0972ec9e8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Ensure a non-interruptible wait is used when moving a bo to
XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely
while a GPU job is still in progress, even if the CPU receives a
signal during the operation.
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit dc5e20ae1f8a7c354dc9833faa2720254e5a5443)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a mesa debug tool for decoding devcoredump files. Recent
changes to improve the devcoredump output broke that tool. So revert
the changes until the tool can be extended to support the new fields.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213172833.1733376-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 70fb86a85dc9fd66014d7eb2fe356f50702ceeb6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.
With that patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
that patch.
Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing")
Cc: stable@vger.kernel.org
Cc: Shuijing Li <shuijing.li@mediatek.com>
Reported-by: Jens Ziller <zillerbaer@gmx.de>
Closes: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241212001908.6056-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-18:
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218204637.2966198-1-alexander.deucher@amd.com
|
|
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop
unsupported 1-lane.
[1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf
[2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf
Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device")
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-4-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove().
Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13-rc4:
- udma-buf fixes related to sealing.
- dma-buf build warning fix when debugfs is not enabled.
- Assorted drm/panel fixes.
- Correct error return in drm_dp_tunnel_mgr_create.
- Fix even more divide by zero in drm_mode_vrefresh.
- Fix FBDEV dependencies in Kconfig.
- Documentation fix for drm_sched_fini.
- IVPU NULL pointer, memory leak and WARN fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
|
|
Commit baf4afc5831438 ("drm/sched: Improve teardown documentation")
added a list of drm_sched_fini()'s problems. The list triggers htmldocs
warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
|
|
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0ec43fbece784215d3c4469973e4556d70bce915)
Cc: stable@vger.kernel.org
|
|
This helps to avoid a spurious PME event on hotplug to Azalia.
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reported-and-tested-by: ionut_n2001@yahoo.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215884
Tested-by: Gabriel Marcano <gabemarcano@yahoo.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241211024414.7840-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3f6f237b9dd189e1fb85b8a3f7c97a8f27c1e49a)
Cc: stable@vger.kernel.org
|
|
Third time's the charm, I hope?
Fixes: d3116756a710 ("drm/ttm: rename bo->mem and make it a pointer")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3837
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 695c2c745e5dff201b75da8a1d237ce403600d04)
Cc: stable@vger.kernel.org
|
|
The VM pointer might already be outdated when that function is called.
Use the PASID instead to gather the information instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 57f812d171af4ba233d3ed7c94dfa5b8e92dcc04)
Cc: stable@vger.kernel.org
|
|
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f2cd1067afe68372a1723e05e19b68ed187676a)
Cc: stable@vger.kernel.org
|
|
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f1fd1d0f40272948aa6ab82a3a82ecbbc76dff53)
Cc: stable@vger.kernel.org
|
|
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63bfd24088b42c6f55c2096bfc41b50213d419b2)
Cc: stable@vger.kernel.org
|
|
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2c8eeaaa0fe5841ccf07a0eb51b1426f34ef39f7)
Cc: stable@vger.kernel.org
|
|
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 22b9555bc90df22b585bdd1f161b61584b13af51)
Cc: stable@vger.kernel.org
|
|
Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7)
|
|
If the kernel hasn't been compiled with PCIe hotplug support this
can lead to problems with dGPUs that use BOCO because they effectively
drop off the bus.
To prevent issues, disable BOCO support when compiled without PCIe hotplug.
Reported-by: Gabriel Marcano <gabemarcano@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707#note_2696862
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241211155601.3585256-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ad5bdc28bafa66db0f041cc6cdd278a80426aae)
|
|
The 'select FB_CORE' statement moved from CONFIG_DRM to DRM_CLIENT_LIB,
but there are now configurations that have code calling into fb_core
as built-in even though the client_lib itself is a loadable module:
x86_64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_set_suspend':
drm_fb_helper.c:(.text+0x2c6): undefined reference to `fb_set_suspend'
x86_64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_resume_worker':
drm_fb_helper.c:(.text+0x2e1): undefined reference to `fb_set_suspend'
In addition to DRM_CLIENT_LIB, the 'select' needs to be at least in
DRM_KMS_HELPER and DRM_GEM_SHMEM_HELPER, so add it here.
This patch is the KMS_HELPER part of [1].
Fixes: dadd28d4142f ("drm/client: Add client-lib module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/141411/ # 1
Link: https://patchwork.freedesktop.org/patch/msgid/20241216074450.8590-4-tzimmermann@suse.de
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Select FB_CORE if GEM's DMA and TTM implementations support fbdev
emulation. Fixes linker errors about missing symbols from the fbdev
subsystem.
Also see [1] for a related SHMEM fix.
Fixes: dadd28d4142f ("drm/client: Add client-lib module")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/141411/ # 1
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216074450.8590-3-tzimmermann@suse.de
|
|
On gt reset, if a context is running, then accumulate it's active time
into the busyness counter since there will be no chance for the context
to switch out and update it's run time.
v2: Move comment right above the if (John)
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7ed047da59cfa1acb558b95169d347acc8d85da1)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Active busyness of an engine is calculated using gt timestamp and the
context switch in time. While capturing the gt timestamp, it's possible
that the context switches out. This race could result in an active
busyness value that is greater than the actual context runtime value by a
small amount. This leads to a negative delta and throws off busyness
calculations for the user.
If a subsequent count is smaller than the previous one, just return the
previous one, since we expect the busyness to catch up.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com
(cherry picked from commit cf907f6d294217985e9dafd9985dce874e04ca37)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
On GT reset, we store total busyness counts for all engines and
re-register the utilization buffer with GuC. At that time we should
reset the buffer, so that we don't get spurious busyness counts on
subsequent queries.
To repro this issue, run igt@perf_pmu@busy-hang followed by
igt@perf_pmu@most-busy-idle-check-all for a couple iterations.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit abd318237fa6556c1e5225529af145ef15d5ff0d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
