summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher1-0/+3
Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher1-0/+1
Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: add DC feature mask module parameterAlex Deucher3-0/+16
Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher1-1/+6
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: disable page queue on Vega10 SR-IOV VFTrigger Huang1-1/+4
Currently, SDMA page queue is not used under SR-IOV VF, and this queue will cause ring test failure in amdgpu module reload case. So just disable it. Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: set Vega20 LBPW as disabled at defaultEvan Quan1-0/+14
For Vega20, LBPW feature is disabled at default. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabledEvan Quan1-20/+17
With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/powerplay: set a default fclk/gfxclk ratioEvan Quan3-1/+19
Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/ttm: Fix bo_global and mem_global kfree errorTrigger Huang2-10/+0
ttm_bo_glob and ttm_mem_glob are defined as structure instance, while not allocated by kzalloc, so kfree should not be invoked to release them anymore. Otherwise, it will cause the following kernel BUG when unloading amdgpu module [ 48.419294] kernel BUG at /build/linux-5s7Xkn/linux-4.15.0/mm/slub.c:3894! [ 48.419352] invalid opcode: 0000 [#1] SMP PTI [ 48.419387] Modules linked in: amdgpu(OE-) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq snd_seq_device snd_timer aesni_intel snd soundcore joydev aes_x86_64 crypto_simd glue_helper cryptd input_leds mac_hid serio_raw binfmt_misc nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too psmouse i2c_piix4 8139cp mii floppy pata_acpi [ 48.419782] CPU: 1 PID: 1281 Comm: modprobe Tainted: G OE 4.15.0-20-generic #21-Ubuntu [ 48.419838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 48.419901] RIP: 0010:kfree+0x137/0x180 [ 48.419934] RSP: 0018:ffffb02101273bf8 EFLAGS: 00010246 [ 48.419974] RAX: ffffeee1418ad7e0 RBX: ffffffffc075f100 RCX: ffff8fed7fca7ed0 [ 48.420025] RDX: 0000000000000000 RSI: 000000000003440e RDI: 0000000022400000 [ 48.420073] RBP: ffffb02101273c10 R08: 0000000000000010 R09: ffff8fed7ffd3680 [ 48.420121] R10: ffffeee1418ad7c0 R11: ffff8fed7ffd3000 R12: ffffffffc075e2c0 [ 48.420169] R13: ffffffffc074ec10 R14: ffff8fed73063900 R15: ffff8fed737428e8 [ 48.420216] FS: 00007fdc912ec540(0000) GS:ffff8fed7fc80000(0000) knlGS:0000000000000000 [ 48.420267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.420308] CR2: 000055fa40c30060 CR3: 000000023470a006 CR4: 00000000003606e0 [ 48.420358] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.420405] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.420452] Call Trace: [ 48.420485] ttm_bo_global_kobj_release+0x20/0x30 [amdttm] [ 48.420528] kobject_release+0x6a/0x180 [ 48.420562] kobject_put+0x28/0x50 [ 48.420595] ttm_bo_global_release+0x36/0x50 [amdttm] [ 48.420636] amdttm_bo_device_release+0x119/0x180 [amdttm] [ 48.420678] ? amdttm_bo_clean_mm+0xa6/0xf0 [amdttm] [ 48.420760] amdgpu_ttm_fini+0xc9/0x180 [amdgpu] [ 48.420821] amdgpu_bo_fini+0x12/0x40 [amdgpu] [ 48.420889] gmc_v9_0_sw_fini+0x40/0x50 [amdgpu] [ 48.420947] amdgpu_device_fini+0x36f/0x4c0 [amdgpu] [ 48.421007] amdgpu_driver_unload_kms+0xb4/0x150 [amdgpu] [ 48.421058] drm_dev_unregister+0x46/0xf0 [drm] [ 48.421102] drm_dev_unplug+0x12/0x70 [drm] Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()Lyude Paul1-5/+0
[why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/display: Drop reusing drm connector for MSTJerry (Fangzhi) Zuo2-35/+7
[why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/display: Cleanup MST non-atomic code workaroundJerry (Fangzhi) Zuo3-46/+4
[why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: fix frame size of amdgpu_xgmi_add_devices excceed 1024 bytesHawking Zhang1-5/+8
Instead of stack-allocated psp_xgmi_topology_info in function amdgpu_xgmi_add_device, dynamically allocated this structure to avoid the frame size of this function excceed 1024 bytes Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm: Fix htmldocs warnings in drm_fourcc.cSean Paul1-1/+1
Add a description for dev and remove the excess one for native. Fixes the following warnings: ../drivers/gpu/drm/drm_fourcc.c:112: warning: Function parameter or member 'dev' not described in 'drm_driver_legacy_fb_format' ../drivers/gpu/drm/drm_fourcc.c:112: warning: Excess function parameter 'native' description in 'drm_driver_legacy_fb_format' Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181107205546.216088-1-sean@poorly.run
2018-11-07drm/i915/icl: Fix power well 2 wrt. DC-off toggling orderImre Deak1-6/+6
To enable DC5/6 power well 2 has to be disabled as for previous platforms, so fix things up. Bspec: 4234 Fixes: 67ca07e7ac10 ("drm/i915/icl: Add power well support") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com
2018-11-07drm/i915: Add short HPD IRQ storm detection for non-MST systemsLyude Paul4-21/+115
Unfortunately, it seems that the HPD IRQ storm problem from the early days of Intel GPUs was never entirely solved, only mostly. Within the last couple of days, I got a bug report from one of our customers who had been having issues with their machine suddenly booting up very slowly after having updated. The amount of time it took to boot went from around 30 seconds, to over 6 minutes consistently. After some investigation, I discovered that i915 was reporting massive amounts of short HPD IRQ spam on this system from the DisplayPort port, despite there not being anything actually connected. The symptoms would start with one "long" HPD IRQ being detected at boot: [ 1.891398] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00440000, dig 0x00440000, pins 0x000000a0 [ 1.891436] [drm:intel_hpd_irq_handler [i915]] digital hpd port B - long [ 1.891472] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 0 [ 1.891508] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - long [ 1.891544] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 7 - cnt: 0 [ 1.891592] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port B - long [ 1.891628] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port D - long … followed by constant short IRQs afterwards: [ 1.895091] [drm:intel_encoder_hotplug [i915]] [CONNECTOR:66:DP-1] status updated from unknown to disconnected [ 1.895129] [drm:i915_hotplug_work_func [i915]] Connector DP-3 (pin 7) received hotplug event. [ 1.895165] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-3] [ 1.895275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.895312] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.895762] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.895799] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.896239] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450085 [ 1.896293] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.896330] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.896781] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.896817] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.897275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 The customer's system in question has a GM45 GPU, which is apparently well known for hotplugging storms. So, workaround this impressively broken hardware by changing the default HPD storm threshold from 5 to 50. Then, make long IRQs count for 10, and short IRQs count for 1. This makes it so that 5 long IRQs will trigger an HPD storm, and on systems with short HPD storm detection 50 short IRQs will trigger an HPD storm. 50 short IRQs amounts to 100ms of constant pulsing, which seems like a good middleground between being too sensitive and not being sensitive enough (which would cause visible stutters in userspace every time a storm occurs). And just to be extra safe: we don't enable this by default on systems with MST support. There's too high of a chance of MST support triggering storm detection, and systems that are new enough to support MST are a lot less likely to have issues with IRQ storms anyway. As a note: this patch was tested using a ThinkPad T450s and a Chamelium to simulate the short IRQ storms. Changes since v1: - Don't use two separate thresholds, just make long IRQs count for 10 each and short IRQs count for 1. This simplifies the code a bit - Ville Syrjälä Changes since v2: - Document @long_hpd in intel_hpd_irq_storm_detect, no functional changes Changes since v4: - Remove !! in long_hpd assignment - Ville Syrjälä - queue_hp = true - Ville Syrjälä Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-6-lyude@redhat.com
2018-11-07drm/i915: Clarify flow for disabling IRQs on stormsLyude Paul1-3/+8
This is rather confusing to look at as-is: dev_priv->display.hpd_irq_setup(dev_priv); in intel_hpd_irq_handler() handles disabling the actual HPD IRQ, while intel_hpd_irq_storm_disable() handles moving the HPD pin state over from MARK_DISABLED to DISABLED along with enabling polling for it. Changes since v3: - Rename i915_hpd_irq_storm_disable() to i915_hpd_irq_storm_switch_to_polling() - Rodrigo Vivi Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-5-lyude@redhat.com
2018-11-07drm/i915: Fix threshold check in intel_hpd_irq_storm_detect()Lyude Paul1-10/+13
Currently in intel_hpd_irq_storm_detect() when we detect that the last recorded hotplug wasn't within the period defined by HPD_STORM_DETECT_DELAY, we make the mistake of resetting the HPD count to 0 without incrementing it. This results in us only enabling storm detection when we go +2 above the threshold, e.g. an HPD threshold of 5 would not trigger a storm until we reach a total of 7 hotplugs. So: rework the code a bit so we reset the HPD count when HPD_STORM_DETECT_DELAY has passed, then increment the count afterwards. Also, clean things up a bit to make it easier to undertand. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-4-lyude@redhat.com
2018-11-07drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MSTLyude Paul1-1/+3
Turns out that if you trigger an HPD storm on a system that has an MST topology connected to it, you'll end up causing the kernel to eventually hit a NULL deref: [ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec [ 332.340906] PGD 0 P4D 0 [ 332.342750] Oops: 0000 [#1] SMP PTI [ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2 [ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915] [ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915] [ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41 [ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006 [ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006 [ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570 [ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840 [ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20 [ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a [ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000 [ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0 [ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 332.376798] Call Trace: [ 332.378809] process_one_work+0x1a1/0x350 [ 332.380806] worker_thread+0x30/0x380 [ 332.382777] ? wq_update_unbound_numa+0x10/0x10 [ 332.384772] kthread+0x112/0x130 [ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70 [ 332.388706] ret_from_fork+0x35/0x40 [ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915] [ 332.394963] CR2: 00000000000000ec This appears to be due to the fact that with an MST topology, not all intel_connector structs will have ->encoder set. So, fix this by skipping connectors without encoders in intel_hpd_irq_storm_reenable_work(). For those wondering, this bug was found on accident while simulating HPD storms using a Chamelium connected to a ThinkPad T450s (Broadwell). Changes since v1: - Check intel_connector->mst_port instead of intel_connector->encoder Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com
2018-11-07drm/i915: Fix possible race in intel_dp_add_mst_connector()Lyude Paul1-4/+4
This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com
2018-11-07drm/i915: Clean up skl_program_scaler()Ville Syrjälä1-13/+5
Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-07drm/i915: Nuke posting reads from plane update/disable funcsVille Syrjälä2-18/+0
No need for the posting reads in the plane update/disable hooks. If we need a posting read for something then a single one at the very end would be sufficient. We have that anyway in the form of eg. scanline/frame counter reads. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-07drm/atomic: Use explicit old/new state in drm_atomic_plane_check()Ville Syrjälä1-39/+46
Convert drm_atomic_plane_check() over to using explicit old vs. new plane states. Avoids the confusion of "what does plane->state mean again?". v2: Stick to the multi-stage logic in plane_switching_crtc() (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181106191624.2207-1-ville.syrjala@linux.intel.com
2018-11-07drm/atomic: Use explicit old/new state in drm_atomic_crtc_check()Ville Syrjälä1-11/+15
Convert drm_atomic_crtc_check() over to using explicit old vs. new crtc states. Avoids the confusion of "what does crtc->state mean again?". Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101184646.14753-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-07drm/atomic: Use explicit old crtc state in drm_atomic_add_affected_planes()Ville Syrjälä1-1/+3
Replace 'crtc->state' with the explicit old crtc state. Actually it shouldn't matter whether we use the old or the new crtc state here since any plane that has been removed from the crtc since the crtc state was duplicated will have been added to the atomic state already. That is, you can't call drm_atomic_set_crtc_for_plane() without having the new plane state already in hand. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101184646.14753-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com>
2018-11-07drm/i915/csr: fix spelling mistake "firmare" -> "firmware"Colin Ian King1-1/+1
Trivial fix to spelling mistake in DRM_INFO message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181107102211.19758-1-colin.king@canonical.com
2018-11-07drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5Chris Wilson1-2/+36
Exercising the gpu reloc path strenuously revealed an issue where the updated relocations (from MI_STORE_DWORD_IMM) were not being observed upon execution. After some experiments with adding pipecontrols (a lot of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe controls or even the current on), it was discovered that we merely needed to delay the EMIT_INVALIDATE by several flushes. It is important to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that needs the delay as opposed to what one might first expect -- that the delay is required for the TLB invalidation to take effect (one presumes to purge any CS buffers) as opposed to a delay after flushing to ensure the writes have landed before triggering invalidation. Testcase: igt/gem_tiled_fence_blits Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
2018-11-07mm, drm/i915: mark pinned shmemfs pages as unevictableKuo-Hsin Yang1-4/+29
The i915 driver uses shmemfs to allocate backing storage for gem objects. These shmemfs pages can be pinned (increased ref count) by shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan wastes a lot of time scanning these pinned pages. In some extreme case, all pages in the inactive anon lru are pinned, and only the inactive anon lru is scanned due to inactive_ratio, the system cannot swap and invokes the oom-killer. Mark these pinned pages as unevictable to speed up vmscan. Export pagevec API check_move_unevictable_pages(). This patch was inspired by Chris Wilson's change [1]. [1]: https://patchwork.kernel.org/patch/9768741/ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> # mm part Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-11-07Merge tag 'gvt-fixes-2018-11-07' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen4-64/+70
drm-intel-fixes gvt-fixes-2018-11-07 - Fix invalidate of old ggtt entry (Hang) - Fix partial ggtt entry update in any order (Hang) - Fix one mask setting for chicken reg (Xinyun) - Fix eDP warning in guest (Longhe) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
2018-11-07Merge tag 'exynos-drm-fixes-for-v4.20-rc2' of ↵Dave Airlie5-25/+12
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Three regressions - Revert frame counter support . This patch fixes a issue which doesn't work extension and clone mode because some CRTC devices don't provide frame counter value properly. - Fix lack of fbdev on Rinato and trats boards. . This patch considers for connector to be registered by DSI after DRM device is registered, and also it makes fbdev initializaion to be done even if no connector at the moment. - Check for dsi->panel object correctly . This patch fixes checking for dsi->panel. of_drm_find_panel function returns panel object or error value so error value should be checked using IS_ERR macro. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1541407733-7632-1-git-send-email-inki.dae@samsung.com
2018-11-07Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie1-1/+1
into drm-fixes Single etnaviv fence fix for GPU recovery. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1541522424.2508.26.camel@pengutronix.de
2018-11-07drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher1-1/+2
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher1-0/+3
Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher1-0/+1
Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu: add DC feature mask module parameterAlex Deucher3-0/+16
Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher1-1/+6
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/vega20: add CLK base offsetAlex Deucher1-0/+1
In case we need to access CLK registers. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/display: Stop leaking planesHarry Wentland1-1/+1
[Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/display: Fix misleading buffer informationShaokun Zhang1-2/+2
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07Revert "drm/amd/display: set backlight level limit to 1"Alex Deucher1-7/+0
This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd: Update atom_smu_info_v3_3 structureLeo Li1-2/+5
Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm: Add drm_any_plane_has_format()Ville Syrjälä1-0/+23
Add a function to check whether there is at least one plane that supports a specific format and modifier combination. Drivers can use this to reject unsupported formats/modifiers in .fb_create(). v2: Accept anyformat if the driver doesn't do planes (Eric) s/planes_have_format/any_plane_has_format/ (Eric) Check the modifier as well since we already have a function that does both v3: Don't do the check in the core since we may not know the modifier yet, instead export the function and let drivers call it themselves Cc: Eric Anholt <eric@anholt.net> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-1-ville.syrjala@linux.intel.com
2018-11-06drm/amdgpu/psp: add set_topology_info functionHawking Zhang1-1/+23
set_topology_info is used for driver to set current topology info to xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add get_topology_info functionHawking Zhang1-0/+39
get_topology_info function is used for driver to query topology_info for current device from xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: update topology info structuresHawking Zhang2-23/+18
topology info structure needs to match with the one defined in xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add get_hive_id functionHawking Zhang1-5/+12
get_hive_id is used for driver to query hive_id for current device from xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add get_node_id functionHawking Zhang4-9/+28
get_node_id function is used for driver to get node_id for current device from xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: initialize xgmi session (v2)Hawking Zhang2-1/+71
Setup and tear down xgmi as part of psp. v2: - make psp_xgmi_terminate static - squash in: drm/amdgpu: only issue xgmi cmd when it is enabled drm/amdgpu/psp: terminate xgmi ta in suspend and hw_fini phase Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add helper function to invoke xgmi ta per ta cmd_idHawking Zhang2-0/+39
psp_xgmi_invoke is the helper function to issue ta cmd to firmware Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add xgmi ta headerHawking Zhang1-0/+130
Add the psp xgmi driver interface. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 09:24:16 +0300