| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.2-2026-08-06:
amdgpu:
- JPEG queue reset fixes
- GC 12 fix
- GMC 12.1 fixes
- Lockdep false positive fix
- Userq fix
- Bounds checking fixes
- Devcoredump fixes
- DCN 2.0.1 fix
- Aperture mapping fix
- DC avmute fix
- DC self refresh fix
radeon:
- Performance regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260806211538.994087-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc6:
- panthor & shmem helpers: Check vma range inside pmd fault handler.
- panthor: handle empty firmware sections correctly.
- bridge/ps8640: Forward aux transfer errors.
- amdxdna: Improve error handling in amdxdna_insert_pages.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/415659f6-5199-4078-8319-22d7529e777d@linux.intel.com
|
|
amdgpu_dm_crtc_set_static_screen_optimze() maps sso_enable to the
Replay and PSR1 vsync events. allow_sr_entry is an entry gate, but the
helper currently applies it to both directions.
A non-fast update clears allow_sr_entry. During a modeset, a separate
hardware-programming event keeps self-refresh blocked while the stream
is reprogrammed. If vblank is enabled before the entry delay expires,
the ISM calls the helper with sso_enable false. The early return drops
the disable request, so the vsync events are not set.
After enough fast commits, allow_sr_entry becomes true and the
hardware-programming event can be cleared. Since the vblank reference
remains held, there is no further zero-to-one vblank transition to
restore the missing vsync events. Replay or PSR1 can then become active
while vblank is still enabled.
Gate only requests that enable static-screen optimization. Always
process disable requests so a vblank requestor keeps Replay and PSR1
blocked.
On a Phoenix system, repeated SDDM-to-VT handoffs produced stuck flips
followed by flip_done and commit-wait timeouts. The timeout was not
observed with this change applied.
Fixes: 3c108046e1d6 ("drm/amd/display: Add power module on Linux")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Signed-off-by: David Weber <weber.aulendorf@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd0c00982166d34ed47b11ba29cd8bf2950cc2e2)
Cc: stable@vger.kernel.org
|
|
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the fini
routines. After drm_dev_unplug() the drm_dev_enter() guard in
amdgpu_ttm_fini() always returns false, so iounmap() for
aper_base_kaddr is silently skipped. On connected_to_cpu hardware
ioremap_cache() maps the aperture as WB; when iounmap() is skipped the
stale WB PAT entry persists. On reload IP discovery's
memremap(MEMREMAP_WC) on the same aperture range hits a WB/WC conflict,
producing an ioremap error and failing re-probe.
Remove the drm_dev_enter() guard and call iounmap() unconditionally.
The aperture mapping is plain MMIO and does not require device-presence
protection. Surprise-removal cleanup of aper_base_kaddr is already
handled unconditionally by amdgpu_device_unmap_mmio().
Fixes: 62d5f9f7110a ("drm/amdgpu: Unmap MMIO mappings when device is not unplugged")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb3f68af9f6fce9343a2bd13b4d68a1c02d283df)
Cc: stable@vger.kernel.org
|
|
Some older DCE timing generators do not implement is_tg_enabled in
their ops table. Calling it unconditionally when waiting for AV mute
frames causes a NULL pointer dereference on Southern Islands dGPUs
when turning the display off over HDMI.
Check that tg and the required ops exist before waiting for frames.
Fixes: 414da24137ac ("drm/amd/display: Add AV mute wait frames to dce110_set_avmute")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5557
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5)
Cc: stable@vger.kernel.org
|
|
devres teardown is LIFO. The aperture devres node was registered after
the DRM device node, so devres_release_all() unmaps the aperture before
the DRM device release callback fires amdgpu_device_fini_sw(). IP
sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a
pointer derived from aper_base_kaddr, causing a kernel page fault on
probe failure / rollback:
BUG: unable to handle page fault ... PMD 0
RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu]
Call Trace:
amdgpu_device_fini_sw
amdgpu_driver_release_kms
devm_drm_dev_init_release
devres_release_all
This reverts commit d871e99879cb5fd1fa798b006b4888887e63a17a.
Fixes: d871e99879cb ("drm/amdgpu: fix aperture mapping leak")
Reported-by: Yuansheng Mao <yuansheng.mao@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 336e0cd576817ac64a4b394ca2b3680029f3e37f)
Cc: stable@vger.kernel.org
|
|
regression
Commit 527ba26e50ec ("drm/radeon: delete radeon_fence_process in
is_signaled, no deadlock") removed the hardware polling from
radeon_fence_is_signaled() to fix a self-deadlock caused by
wake_up_all(&rdev->fence_queue) being called with the fence queue
lock held.
However, removing the polling entirely causes significant performance
regression (e.g. glxgears FPS drop) because the fence signaled check
becomes purely passive — it only reads the cached last_seq without
probing the GPU, so completed GPU work is not detected in time,
causing unnecessary CPU stalls in sync-heavy workloads.
Fix this by calling radeon_fence_activity() directly instead of
radeon_fence_process(). radeon_fence_activity() reads the hardware
fence counter and updates last_seq via atomic ops without calling
wake_up_all(), thus avoiding the deadlock while restoring timely
fence detection.
Fixes: 527ba26e50ec ("drm/radeon: delete radeon_fence_process in is_signaled, no deadlock")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f59ad4cca219c7fdf934f712c5860ec5f5900fd7)
Cc: stable@vger.kernel.org
|
|
The VBIOS for Cyan Skillfish devices (DCN201) indicates there is
DisplayPort ref clock spread spectrum downspread, so the audio clock
is corrected for it.
However, the clock source in this hardware does not seem to actually be
running with a clock downspread, so DisplayPort audio desyncs with video
after several minutes.
Ignore dprefclk SS downspread on CYAN_SKILLFISH2 asic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5429
Signed-off-by: Travis K. Bangs <tbangs89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f3a2d86587432fdd9a6d401507b60a01153453c5)
Cc: stable@vger.kernel.org
|
|
Check for mmhub0 rather than mmhub1. Looks like a copy
paste typo.
Fixes: d0c989a0aad3 ("drm/amd/amdgpu : Use the MES INV_TLBS API for tlb invalidation on gfx12_1")
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0e8faef0aaa4d08f3f4f67ee7bb74e1babc8efc4)
Cc: stable@vger.kernel.org
|
|
Allocate each ring buffer separately. A single allocation summing all
ring sizes can exceed the page allocator's MAX_ORDER limit and fail;
per-ring buffers stay small enough to satisfy. The existing allocation
style doesn't capture any ring data if the huge allocation fails.
Splitting into multiple allocations helps to capture as much data as
possible for the core dump.
A failed ring is left with a NULL buffer and skipped when formatting.
Fixes: eea85914d15b ("drm/amdgpu: save ring content before resetting the device")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Assisted-by: Claude Code
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e8e92b7892a6377bef86106bfff1b98cf586aee)
Cc: stable@vger.kernel.org
|
|
The number of rings with outstanding fences can be large, requiring a
bigger allocation. Such allocations don't need to be physically
contiguous, so use kvzalloc/kvcalloc which fall back to vmalloc when
contiguous memory isn't available. This also matches the existing
kvfree used to free these allocations.
Also guard the allocation with ring_count to avoid passing 0 size to
allocation routines.
Fixes: eea85914d15b ("drm/amdgpu: save ring content before resetting the device")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74d48bd6b7e12eba65de0507475b059966685ad1)
Cc: stable@vger.kernel.org
|
|
On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through
to ib->length_dw without a limit, while ring_emit_ib() encodes length
into packet fields. Oversized values can corrupt adjacent control bits
and destabilize command submission.
Add a per-ring IB packet size limit helper and reject command
submissions exceeding the corresponding dword limit before IB
allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE,
and apply the MM fallback limit for other ring types.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52)
Cc: stable@vger.kernel.org
|
|
Creating a user queue can race with a GPU reset. While recovery holds
reset_domain->sem for write, MES is unresponsive, so the ADD_QUEUE from
amdgpu_userq_map_helper() times out (-110) and an otherwise valid queue
create fails:
amdgpu: MES(0) failed to respond to msg=ADD_QUEUE
[drm:mes_userq_map [amdgpu]] *ERROR* Failed to map queue in HW, err (-110)
amdgpu: [drm] *ERROR* ... Failed to map Queue
amdgpu: [drm] *ERROR* ... Failed to create usermode queue
Take reset_domain->sem for read around the map so it runs only once MES
is back up. This mirrors amdgpu_userq_cleanup() and honors the
userq_mutex -> reset_domain->sem order; the reset path never takes
userq_mutex, so there is no deadlock.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8e151fe629c63b0eb08aa57de0d434614db3e1b)
Cc: stable@vger.kernel.org
|
|
Move fs_reclaim_acquire() to before all lock acquisitions to eliminate
false positive circular locking dependency warning.
This is a 7.2-cycle regression fix suitable for stable backport.
v3: Address Mikhail Gavrilov technical review:
- Clarify that fs_reclaim_acquire/release pair only REGISTERS the
fs_reclaim lock class, does NOT create a static edge when called
with no locks held
- Explain that the actual fs_reclaim -> notifier_lock edge is
established at runtime during memory reclaim -> MMU notifier path
- Add Cc: Arunpravin PaneerSelvam
v2: Address Mikhail Gavrilov review feedback:
- Fix author name: Michael -> Mikhail Gavrilov in all trailers
- Add Fixes: tag to link regression to original commit
- Add Tested-by: Mikhail Gavrilov (tested on RX 7900 XTX)
Fixes: 1d0f5838b126 ("drm/amdgpu: Add lockdep annotations for lock ordering validation")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Analyzed-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Test-case-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin PaneerSelvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 70a1e9849e6ed12bb9f1c0faa24b0f1f9de601eb)
Cc: stable@vger.kernel.org
|
|
Needed to properly lock the interface before using it.
Cc: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e37aa0bd56ba75801a6a21bed45f96372cd9fdc)
Cc: stable@vger.kernel.org
|
|
TA_CNTL2.TRUNCATE_COORD_MODE selects whether texture coordinate
truncation is D3D9/GL/Vulkan conformant. gfx11 reads it and reports it to
userspace via AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD, but gfx12 never
read it, so the flag was always reported as 0 and userspace fell back to
the non-conformant path.
Read it in gfx_v12_0_constants_init() like gfx11 does.
Fixes: 52cb80c12e8a ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4261cbc7b03f1f56e95aeaf1492b8690fa5a253e)
Cc: stable@vger.kernel.org
|
|
Like jpeg_v5_0_0, in DPG mode the ring reset path only clears the
JPEG_PG_MODE bit and never resets a hung JRBC, so the post-reset ring test
times out and the driver falls back to a full MODE1 reset.
Temporarily force the static power-gating path during the reset so the
stop/start sequence power-cycles the JPEG block (JMI soft reset + power
off/on), matching the jpeg_v4_0 reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e93659cab11c48255dcac58af60203c99815586b)
Cc: stable@vger.kernel.org
|
|
Like jpeg_v5_0_0, in DPG mode the ring reset path only clears the
JPEG_PG_MODE bit and never resets a hung JRBC, so the post-reset ring test
times out and the driver falls back to a full MODE1 reset.
Temporarily force the static power-gating path during the reset so the
stop/start sequence power-cycles the JPEG block (JMI soft reset + power
off/on), matching the jpeg_v4_0 reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 75a308eef4503a9d2bf297bef5a9317d2209e696)
Cc: stable@vger.kernel.org
|
|
In DPG mode jpeg_v5_0_0_ring_reset() takes the DPG stop path, which only
clears the JPEG_PG_MODE bit and never resets the JRBC. A hung ring is not
recovered: the post-reset ring test times out and the driver falls back to
a full MODE1 reset.
Temporarily force the static power-gating path during the reset so the
stop/start sequence power-cycles the JPEG block (JMI soft reset + power
off/on), matching the jpeg_v4_0 reset which has no DPG path.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79b3612827d1adcd2008cd585961fa35a6ff20f2)
Cc: stable@vger.kernel.org
|
|
When checking a different patch[1] sashiko AI pointed out that
panthor needs the same fix[2]:
In the ->huge_fault handler do not install a PMD huge page
mapping if the huge page exceeds the boundaries of the VMA.
[1] https://lore.kernel.org/lkml/20260622215718.1532689-1-lk@c--e.de/
[2] https://sashiko.dev/#/patchset/20260622215718.1532689-1-lk%40c--e.de
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Fixes: 68cbf96b1e9b ("drm/panthor: Part ways with drm_gem_shmem_object")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/lkml/20260622215718.1532689-1-lk@c--e.de/
Link: https://patch.msgid.link/20260623181942.1536598-1-lk@c--e.de
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
VFs were missing the call to apply the global scheduling policy.
Call xe_guc_submit_enable() during vf_uc_load_hw() to ensure VFs
get the same policy enforcement as PF.
Fixes: 26caeae9fb48 ("drm/xe/guc: Set RCS/CCS yield policy")
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260709075945.1337660-1-marcin.bernatowicz@linux.intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit f09360e857130f7ab7f069e2421e6b4a6e502531)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The q->replay_state is blindly overwritten, which can potentially leak
memory that was previously allocated by vmemdup_user().
Return an error if q->replay_state is not empty.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 1026c1a73a96 ("drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260624111421.1258364-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In the ->huge_fault handler do not install a PMD huge page
mapping if the huge page exceeds the boundaries of the VMA.
All other ->huge_fault handlers have similar checks and the
resulting mapping will trigger a VM_BUG_ON_VMA() if it ever
reaches copy_pmd_range().
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: stable@vger.kernel.org
Fixes: fc3bbf34e643 ("drm/shmem-helper: Fix huge page mapping in fault handler")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260622215718.1532689-1-lk@c--e.de
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally.
Cc: stable@vger.kernel.org # 6.15
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
One DP DSC fix and one HDMI 2.0 fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/amvIvqJehP7uaUgx@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.2-2026-07-30:
amdgpu:
- PM sysfs fix for APUs
- Follow on pageflip timeout fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260730150018.801791-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Check no-DMA huge-pte cases before DMA segment test (Himal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/amtk7ZddR12dgg-A@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fies for v7.2-rc6:
- vmwgfx:
- Improve various size checks and limit checks.
- Fix oops when submitting invalid execbuf ioctl.
- Correctly lock in vmfwgx fence signaling path.
- More validation of execbuf ioctl.
- Fix oops in vmwgfx vkms init failure path.
- Overflow handling in shader path.
- Improve firmware validation in panthor.
- Fix small leak in bridge/display-connector
- Improve imagination trace points.
- Fix QAIC transaction length check.
- Restrict some DP bandwidth calculations to HDMI DFP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/178a513f-2d7f-4e3a-811b-cd0d9dc309eb@linux.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.2-2026-07-29:
amdgpu:
- VCN 5.3 fix
- UserQ fixes
- GEM close optimization
- HDMI AV mute fix
- UML build fixes
- GFXOFF residency metrics fixes
- SMU 15 fixes
- debug_vm fix
- PSP 15 fixes
- NBIO 7.11.5 fix
- pptable use after free fix
- gpu metrics fetch fix
- DC viewport fix
- DML2.1 fix
- i2c retimer spam fix
- UMD profile pstate fix
- Power metrics format cleanup
- GTT size fix on APUs
- DC context logging fix
amdkfd:
- Various bounds checking fixes
- Mutex locking fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260729182209.4072227-1-alexander.deucher@amd.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20260729
1. Check CRTC state before freeing
2. mtk_hdmi: Fix DDC adapter double put in v2
3. mtk_hdmi_common: take i2c adapter module reference
4. mtk_dsi: Enable HS clock only at pre-enable
5. ovl_adaptor: balance component registrations
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patch.msgid.link/20260729131701.4158-1-chunkuang.hu@kernel.org
|
|
ps8640_aux_transfer_msg() programs the AUX address registers, starts the
AUX transfer, waits for SWAUX_SEND to clear, and reads the AUX status
register. Several of those regmap operations have return values, but the
function only checks a stale ret after the status read.
Propagate failures from the address write, transfer start, completion
poll, and status read. This avoids returning a transfer length when the
bridge register transaction or AUX completion wait failed.
Fixes: 13afcdd7277e ("drm/bridge: parade-ps8640: Add support for AUX channel")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260723103509.2-ps8640-v2-pengpeng@iscas.ac.cn
|
|
HDMI 2.0 section 6.1.3.1 specifies that after enabling
Scrambling_Enable and starting scrambled video transmission, the source
should poll Scrambling_Status until it reads 1 or until a timeout of
200 ms expires.
Add a polling step after enabling the HDMI port to check the scrambling
status when HDMI scrambling is enabled.
On some HDMI 2.0 sinks, omitting this check can result in 4K@60Hz
(594 MHz) failing to come up correctly because the sink has not yet
finished its scrambling setup. In practice, waiting for the scrambling
status here fixes such sinks.
While this synchronous polling is not itself explicitly required for
correct modeset sequencing, HDMI 2.0 section 6.1.3.1 does recommend it
as the way for the source to verify that the TMDS link is functioning
correctly with scrambling enabled.
v3:
- Add explicit HDMI 2.0 section reference in code comment
- Clarify commit message around the observed sink fix
v2:
- Poll TMDS_Scrambler_Status for up to 200 ms instead of using a fixed
delay
Reported-by: Jerome Tollet <jtollet@cisco.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6868
Link: https://lore.kernel.org/dri-devel/20251230091037.5603-1-jerome.tollet@gmail.com/
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20260520022544.3097252-1-ankit.k.nautiyal@intel.com
(cherry picked from commit b7d51d65e4f12a48392d260613108ec262bc7774)
Fixes: 15953637886d ("drm/i915: enable scrambling")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
panthor_fw_load_section_entry() skips BO creation when the firmware section
VA range is empty. If such a section is added to the firmware section list,
section->mem is left as NULL.
Later reload and unplug paths iterate over all firmware sections and
dereference section->mem, which can lead to a NULL pointer dereference.
Zero-sized firmware sections are valid, so accept them as no-op entries but
skip adding them to the section list.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260724172621.63046-1-osama.abdelkader@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
|
|
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: 48ab86360af1 ("drm/amd/display: check GRPH_FLIP status before sending event")
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05984e29520a28c27f5a2388742c957a6a87ee7a)
|
|
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db69777cd2f059d50fe34e365ddd5add)
Cc: stable@vger.kernel.org
|
|
iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual
address points inside the shared section. The returned pointer is later
used as a full firmware interface structure, so accepting an address near
the end of the shared section can still lead to out-of-bounds accesses.
Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges
that do not fit entirely in the shared section.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260720114918.15973-1-osama.abdelkader@gmail.com
|
|
On a non-range clear, curs.size is never set, so the segment test
(next - va_curs_start > curs->size) returns false for every level > 0
before the clear_pt short-circuit is reached. The clear then descends to
level 0 instead of forming a huge zero-leaf, wasting page tables and
risking -ENOMEM on unbind.
Move the null-VMA, purged-BO and clear_pt short-circuits above the
curs->size test. The bind path always sets curs.size, so it is unaffected.
v2
- Also set curs.size on the clear path so the cursor stays meaningful
during the walk. clear_pt is only reached with range == NULL, so assert
that invariant. (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 5b658b7e89c3 ("drm/xe: Clear scratch page on vm_bind")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728055916.593707-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
(cherry picked from commit 04eeeb45cb61b8a3e9d785003457e550c920ba49)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Trace point pvr_job_submit_fw() is used to trace job submission to
the FW. Currently it is recorded when a command is written to the Client
circular buffer.
Move trace recording after writing command to the Kernel circular buffer to
better represent command submission to the FW.
Fixes: c1079aebb4de ("drm/imagination: Add support for trace points")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260724-b4-tracepoint-fix-v3-1-8f8e5e8179d3@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
|
|
intel_dp_hdmi_sink_max_frl() limits the sink's max FRL rate by its
DSC max FRL rate whenever the sink supports DSC 1.2.
However, the DSC max FRL rate (HF-VSDB DSC_Max_FRL_Rate) only applies
to compressed video transport, which requires a DSC 1.2 encoder in
the PCON (configured via intel_dp_pcon_dsc_configure()).
Without such an encoder the HDMI link always carries uncompressed
video, for which the regular Max_FRL_Rate is the correct limit.
Applying the DSC limit unconditionally trains the FRL link at a lower
rate than both the PCON and the sink support.
E.g. an LG OLED G4 (Max_FRL_Rate 48 Gbps, DSC_Max_FRL_Rate 24 Gbps)
behind a Synaptics VMM7100 PCON (PCON max FRL bw 48 Gbps, no DSC
encoder):
Sink max rate from EDID = 24 Gbps
FRL trained with : 24 Gbps
while Windows/macOS train the same hardware at 40/48 Gbps.
The too low FRL rate needlessly constrains the formats available to
the sink.
Only apply the sink's DSC max FRL rate if the PCON has a DSC 1.2
encoder, matching the gate in intel_dp_pcon_dsc_configure().
PCONs with a DSC encoder keep the current conservative behavior,
since the link is trained once and compressed transport may be used
for any subsequent mode.
With this the setup above trains at 48 Gbps.
Tested on PTL (xe) with the above PCON/sink combo.
Fixes: 10fec80b48c5 ("drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260718105207.5565-3-alexander.kaplan@sms-medipool.de
(cherry picked from commit 71b57dd92f94569dca4bdf883fbd8ca5d4ed4bae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The OVL adaptor registers both an aggregate driver for its child devices
and a component for the main DRM aggregate. Probe currently ignores an
error from registering the child aggregate and leaves that aggregate
registered if registering the DRM component fails. The remove callback
also leaves the DRM component registered.
These imbalances can leave component framework entries referring to a
device whose probe failed or whose driver has been detached. The aggregate
unbind callback also fails to undo component_bind_all(), leaving its child
components marked as bound when the aggregate is removed.
Check the aggregate registration result, unwind it when the component
registration fails, and unregister the component before the aggregate on
remove. Keep runtime PM enabled until both framework registrations have
been removed, and unbind all child components from the aggregate unbind
callback.
Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4+
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260721152242.47138-1-mhun512@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Commit 76255024cadb ("drm/mediatek: mtk_dsi: enable hs clock
during pre-enable") rightfully moves the HS clock enablement to
before atomic_enable(), but it's moving it to mtk_dsi_poweron(),
which is not only called in the .atomic_pre_enable() callback
for the DRM bridge, but also in the MediaTek DRM's .ddp_start()
callback, which happens way before the bridge ones.
The HS clock enablement should be done at just the right time,
otherwise some bridge chips (or some Display Driver ICs) may
not work correctly: this is seen at least with a Parade DSI to
eDP bridge (PS8640) on the MT8173 Elm Chromebook.
This resolves a regression that was seen on the aforementioned
machine, which was happening only after a suspend-resume cycle.
Cc: <stable@vger.kernel.org> # 7.1.x
Fixes: 76255024cadb ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Adam Thiede <me@adamthiede.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260728153145.578404-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The PCON max FRL bandwidth field lives in byte 2 of the DFP Detailed
Capability Info (DPCD 0x82 for the first DFP).
The DP standard defines the meaning of descriptor bytes 1-3 strictly
per DFP type, and for a DisplayPort type DFP all of them are
reserved, with "read all 0s" semantics (DP v2.0, section 2.12.3,
Table 2-183).
The FRL bandwidth field is an HDMI DFP extension added by the VESA
DP-to-HDMI PCON specification.
drm_dp_get_pcon_max_frl_bw() however parses the byte without checking
the DFP type, the branch presence or DETAILED_CAP_INFO_AVAILABLE.
Without the latter the port descriptors are one byte wide and
port_cap[2] is not even the right register.
All neighbouring helpers parsing the same descriptor are scoped by
the DFP type already, see for instance drm_dp_downstream_max_bpc()
reading the same byte and returning 0 for a DP type DFP.
amdgpu's DC parses the field only for HDMI(/DP++) detailed types as
well.
This is not theoretical.
A Synaptics VMM7100 based USB-C to HDMI adapter with a macOS targeted
firmware advertises a DisplayPort type DFP with the type byte
replicated across the whole descriptor (08 08 08 08).
i915 decodes that as "PCON limited to 18 Gbps FRL" and prunes every
mode above ~750 MHz dotclock, including all the 4k@100/120 modes the
sink EDID offers, while macOS drives 4k@120 through the same adapter
just fine via DP DSC (and amdgpu's type-scoped parser would ignore
the bogus field as well).
Only parse the field for an HDMI DFP behind a DPCD 1.1+ branch
device that reports detailed cap info, matching the type-scoped
field layout of the spec and the rest of the helpers.
Fixes: ce32a6239de6 ("drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260610193825.2933-1-alexander.kaplan@sms-medipool.de
|
|
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf23c ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)
Cc: stable@vger.kernel.org
|
|
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5dafdd649280c7dc6c22c8f877da3f54fcc441e1)
Cc: stable@vger.kernel.org
|
|
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f3c ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121fb6 ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790bafec47a507e9662bf380f2e027d420)
Cc: stable@vger.kernel.org
|
|
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 138531c8850cc247aa12b104bb29ea387bcdcbb1)
Cc: stable@vger.kernel.org
|
|
Commit a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C")
had also changed the "Set retimer failed" messages from DC_LOG_DEBUG()
to DC_LOG_ERROR(). This unfortunately can create log spam.
Change those back to DC_LOG_DEBUG() only.
Fixes: a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da8609eef18b0a3490d0e1fa9440659fadc8194d)
Cc: stable@vger.kernel.org
|
|
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa)
Cc: stable@vger.kernel.org
|
|
Verify that the phantom plane was allocated to avoid a later
segfault.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4970
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f)
Cc: stable@vger.kernel.org
|
|
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da)
Cc: stable@vger.kernel.org
|
