summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2011-10-28Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds185-5482/+18166
* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (290 commits) Revert "drm/ttm: add a way to bo_wait for either the last read or last write" Revert "drm/radeon/kms: add a new gem_wait ioctl with read/write flags" vmwgfx: Don't pass unused arguments to do_dirty functions vmwgfx: Emulate depth 32 framebuffers drm/radeon: Lower the severity of the radeon lockup messages. drm/i915/dp: Fix eDP on PCH DP on CPT/PPT drm/i915/dp: Introduce is_cpu_edp() drm/i915: use correct SPD type value drm/i915: fix ILK+ infoframe support drm/i915: add DP test request handling drm/i915: read full receiver capability field during DP hot plug drm/i915/dp: Remove eDP special cases from bandwidth checks drm/i915/dp: Fix the math in intel_dp_link_required drm/i915/panel: Always record the backlight level again (but cleverly) i915: Move i915_read/write out of line drm/i915: remove transcoder PLL mashing from mode_set per specs drm/i915: if transcoder disable fails, say which drm/i915: set watermarks for third pipe on IVB drm/i915: export a CPT mode set verification function drm/i915: fix transcoder PLL select masking ...
2011-10-27Revert "drm/ttm: add a way to bo_wait for either the last read or last write"Dave Airlie10-120/+38
This reverts commit dfadbbdb57b3f2bb33e14f129a43047c6f0caefa. Further upstream discussion between Marek and Thomas decided this wasn't fully baked and needed further work, so revert it before it hits mainline. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-27Revert "drm/radeon/kms: add a new gem_wait ioctl with read/write flags"Dave Airlie7-46/+8
This reverts commit d3ed74027f1dd197b7e08247a40d3bf9be1852b0. Further upstream discussion between Thomas and Marek decided this needed more work and driver specifics. So revert before it goes upstream. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-24Merge branch 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux ↵Dave Airlie21-421/+1130
into drm-core-next * 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux: (72 commits) drm/i915/dp: Fix eDP on PCH DP on CPT/PPT drm/i915/dp: Introduce is_cpu_edp() drm/i915: use correct SPD type value drm/i915: fix ILK+ infoframe support drm/i915: add DP test request handling drm/i915: read full receiver capability field during DP hot plug drm/i915/dp: Remove eDP special cases from bandwidth checks drm/i915/dp: Fix the math in intel_dp_link_required drm/i915/panel: Always record the backlight level again (but cleverly) i915: Move i915_read/write out of line drm/i915: remove transcoder PLL mashing from mode_set per specs drm/i915: if transcoder disable fails, say which drm/i915: set watermarks for third pipe on IVB drm/i915: export a CPT mode set verification function drm/i915: fix transcoder PLL select masking drm/i915: fix IVB cursor support drm/i915: fix debug output for 3 pipe configs drm/i915: add PLL sharing support to handle 3 pipes drm/i915: fix PCH PLL assertion check for 3 pipes drm/i915: use transcoder select bits on VGA and HDMI on CPT ...
2011-10-23vmwgfx: Don't pass unused arguments to do_dirty functionsJakob Bornecrantz1-9/+3
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-23vmwgfx: Emulate depth 32 framebuffersJakob Bornecrantz1-1/+9
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-21drm/radeon: Lower the severity of the radeon lockup messages.Dave Jones1-1/+1
abrt files a lot of bug reports when users get GPU lockups, but there's not really enough context to do anything useful with them. Given the lack of GPU context being dumped, this patch removes the stack trace, so that abrt ignores the messages. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-21drm/i915/dp: Fix eDP on PCH DP on CPT/PPTAdam Jackson1-6/+6
According to the gen6 docs, only the DP_A port (on-CPU eDP) still uses the old IBX bit shift for the link training pattern setup bits. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915/dp: Introduce is_cpu_edp()Adam Jackson1-2/+13
The obvious counterpart to is_pch_edp(). Convert existing instances of the idiom to the new routine. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: use correct SPD type valueJesse Barnes1-1/+1
SPD frames are actually type 0x83, not just 0x3. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: fix ILK+ infoframe supportJesse Barnes1-7/+11
Misc fixes based on tests with an infoframe analyzer: - checksum *does* include header bytes - DIP enable & AVI infoframe are tied together in hw, so disable both and make sure AVI frames are enabled first - use every vsync flag for SPD frames to avoid reserved value in frequency field when enabling both AVI & SPD Fixes https://bugs.freedesktop.org/show_bug.cgi?id=40281. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: add DP test request handlingJesse Barnes1-0/+37
DPCD 1.1+ adds some automated test infrastructure support. Add support for reading the IRQ source and jumping to a test handling routine if needed. Subsequent patches will handle particular tests; this patch just ACKs any requested tests by default. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: read full receiver capability field during DP hot plugJesse Barnes1-2/+2
Read link status first, followed by the full DPCD receiver cap field rather than just the first 8 bytes. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915/dp: Remove eDP special cases from bandwidth checksAdam Jackson1-18/+2
These were just working around the math being wrong. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915/dp: Fix the math in intel_dp_link_requiredAdam Jackson1-5/+21
The previous code was confused about units, which is pretty reasonable given that the units themselves are confusing. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915/panel: Always record the backlight level again (but cleverly)Takashi Iwai1-8/+13
The commit 47356eb67285014527a5ab87543ba1fae3d1e10a introduced a mechanism to record the backlight level only at disabling time, but it also introduced a regression. Since intel_lvds_enable() may be called without disabling (e.g. intel_lvds_commit() calls it unconditionally), the backlight gets back to the last recorded value. For example, this happens when you dim the backlight, close the lid and open the lid, then the backlight suddenly goes to the brightest. This patch fixes the bug by recording the backlight level always when changed via intel_panel_set_backlight(). And, intel_panel_{enable|disable}_backlight() call the internal function not to update the recorded level wrongly. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21i915: Move i915_read/write out of lineAndi Kleen2-19/+43
With the tracing code in there they are far too big to inline. .text savings compared to a non force inline kernel: i915_restore_display 4393 12036 +7643 i915_save_display 4295 11459 +7164 i915_handle_error 2979 6666 +3687 i915_driver_irq_handler 2923 5086 +2163 i915_ringbuffer_info 458 1661 +1203 i915_save_vga - 1200 +1200 i915_driver_irq_uninstall 453 1624 +1171 i915_driver_irq_postinstall 913 2078 +1165 ironlake_enable_drps 719 1872 +1153 i915_restore_vga - 1142 +1142 intel_display_capture_error_state 784 2030 +1246 intel_init_emon 719 2016 +1297 and more ... [AK: these are older numbers, with the new SNB forcewake checks it will be even worse] Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: remove transcoder PLL mashing from mode_set per specsJesse Barnes1-25/+0
Belongs in PCH enable instead. The duplication is worrying and the specs explicitly list transcoder select *after* actual PLL enable, which doesn't occur until later. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: if transcoder disable fails, say whichJesse Barnes1-1/+1
Just some extra debug output. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: set watermarks for third pipe on IVBJesse Barnes2-0/+15
The watermark reg for the third pipe is in an unusual offset; add support for it and set watermarks for 3 pipe configs. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: export a CPT mode set verification functionJesse Barnes3-0/+32
At the point where we check, we can't do much about the failure, but it can aid debugging. Note that the auto-train override bit will be reset as part of normal mode setting with this patch if a pipe ever does get stuck, but that's consistent with the workaround for CPT provided by the hardware team. This patch helped catch the fact that the pipe wasn't running in the !composite sync FDI case on my IVB SDV, so has already shown to be useful. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: fix transcoder PLL select maskingJesse Barnes1-5/+10
Transcoder A will always use PLL A and transcoder B will use PLL B. But transcoder C could use either, so always mask the select bits off before or'ing in a new value. Reported-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: fix IVB cursor supportJesse Barnes2-5/+43
The cursor regs have moved around, add the offsets and new macros for getting at them. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: fix debug output for 3 pipe configsJesse Barnes1-1/+1
We can have more than just A and B these days. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: add PLL sharing support to handle 3 pipesJesse Barnes2-38/+63
Add two new fields to the intel_crtc struct for 3 pipe support: no_pll and use_pll_a. The no_pll field is only set on the 3rd pipe to indicate that it doesn't have a PLL of its own and so shouldn't try to write the main PLL regs. The use_pll_a field controls which PLL pipe 3 will share, A or B. The core code will try to share PLLs with whichever pipe has the same timings, rejecting the mode set if none is found. This means that pipe 3 must always be set after one of the other pipes has been configured with real PLL settings. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: fix PCH PLL assertion check for 3 pipesJesse Barnes1-0/+13
Add a couple of checks now that we're using the 3rd transcoder: 1) make sure the transcoder PLL enable bit is set for the transcoder in question 2) when checking actual PLL enable, use the selected PLL number rather than the transcoder number (they could be different now) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: use transcoder select bits on VGA and HDMI on CPTJesse Barnes2-17/+11
Required for 3 pipe functionality. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: split refclk code out of ironlake_crtc_mode_setJesse Barnes1-4/+35
Just a cleanup to make the mode_set function more manageable. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: support 3 pipes on IVB+Jesse Barnes7-9/+20
Well almost anyway. IVB has 3 planes, pipes, transcoders, and FDI interfaces, but only 2 pipe PLLs. So two of the pipes must use the same pipe timings (e.g. 2 DP plus one other, or two HDMI with the same mode and one other, etc.). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: PLL macro cleanup and pipe assertion checkJesse Barnes2-3/+9
Add a macro for accessing the two pipe PLLs and add a check to make sure we don't access a non-existent one in the enable/disable functions. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: always set FDI composite sync bitJesse Barnes2-0/+3
It's needed for 3 pipe support as well as just regular functionality (e.g. DisplayPort). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Adam Jackson <ajax@redhat.com> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Use PIPE_CONTROL for flushing on gen6+.Jesse Barnes2-12/+130
v2 by danvet: Use a new flag to flush the render target cache on gen6+ (hw reuses the old write flush bit), as suggested by Ben Widawsdy. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: this seems to fix cairo-perf-trace hangs on my snb] Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Rename PIPE_CONTROL bit defines to be less terse.Kenneth Graunke2-10/+12
"STALL_AT_SCOREBOARD" is much clearer than "STALL_EN" now that there are several different kinds of stalls. Also, "INSTRUCTION_CACHE_INVALIDATE" is a lot easier to understand at a glance than the terse "IS_FLUSH." Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: use INVALIDATE for ro cache flags for more consistency] Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Remove implied length of 2 from GFX_OP_PIPE_CONTROL #define.Kenneth Graunke2-5/+5
Not all PIPE_CONTROLs have a length of 2, so remove it from the #define and make each invocation specify the desired length. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: implement style suggestion from Ben Widawsdy] Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: ILK + VT-d workaroundBen Widawsky1-0/+30
Idle the GPU before doing any unmaps. We know if VT-d is in use through an exported variable from iommu code. This should avoid a known HW issue. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Remove early exit on i915_gpu_idleBen Widawsky1-6/+0
[Description from: Daniel Vetter] I've just discussed this quickly with Chris on irc and it's probably best to just kill the list_empty early bailout. gpu_idle isn't a fastpath, so who cares. One candidate where we emit commands to the ring without adding anything onto these lists is e.g. pageflip. There are probably more. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: drop KM_USER0 argument to k(un)map_atomicDaniel Vetter2-5/+5
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Defend against userspace creating a gem object with size==0Chris Wilson1-0/+2
We currently only round up the userspace size to the next page. We assume that userspace hasn't made a mistake and requested a zero-length gem object and all through our internal code we then presume that every object is backed by at least a single page. Fix that oversight and report EINVAL back to userspace if they try to create a zero length object. [danvet: This fixes tests/gem_bad_length] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: simplify swapin/out swizzle checking a bitDaniel Vetter2-12/+2
Use the helper function already employed by the pwrite/pread functions. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: fix swizzling on gen6+Daniel Vetter1-1/+4
Fixes tests/gem_tiled_pread on my snb. I know, mesa doesn't use this on gen6+, but I also hate failing testcases. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: properly cancel rps_work on module unload v2Daniel Vetter1-0/+5
The rps disabling code wasn't properly cancelling outstanding work items. Also add a comment that explains why we're not racing with the work item that could unmask interrupts - that piece of code confused me quite a bit. v2: Ben Widawsky pointed out that the first patch would deadlock (and a few lesser problems). All corrected. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: close PM interrupt masking races in the rps work funcDaniel Vetter1-1/+1
This patch closes the following race: We get a PM interrupt A, mask it, set dev_priv->iir = PM_A and kick of the work item. Scheduler isn't grumpy, so the work queue takes rps_lock, grabs pm_iir = dev_priv->pm_iir and pm_imr = READ(PMIMR). Note that pm_imr == pm_iir because we've just masked the interrupt we've got. Now hw sends out PM interrupt B (not masked), we process it and mask it. Later on the irq handler also clears PMIIR. Then the work item proceeds and at the end clears PMIMR. Because (local) pm_imr == pm_iir we have pm_imr & ~pm_iir == 0 so all interrupts are enabled. Hardware is still interrupt-happy, and sends out a new PM interrupt B. PMIMR doesn't mask B (it does not mask anything), PMIIR is cleared, so we get it and hit the WARN in the interrupt handler (because dev_priv->pm_iir == PM_B). That's why I've moved the WRITE(PMIMR, 0) up under the protection of the rps_lock. And write an uncoditional 0 to PMIMR, because that's what we'll do anyway. This races looks much more likely because we can arbitrarily extend the window by grabing dev->struct mutex right after the irq handler has processed the first PM_B interrupt. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: close PM interrupt masking races in the irq handlerDaniel Vetter1-2/+4
Quoting Chris Wilson's more concise description: "Ah I think I see the problem. As you point out we only mask the current interrupt received, so that if we have a task pending (and so IMR != 0) we actually unmask the pending interrupt and so could receive it again before the tasklet is finally kicked off by the grumpy scheduler." We need the hw to issue PM interrupts A, B, A while the scheduler is hating us and refuses to run the rps work item. On receiving PM interrupt A we hit the WARN because dev_priv->pm_iir == PM_A | PM_B Also add a posting read as suggested by Chris to ensure proper ordering of the writes to PMIMR and PMIIR. Just in case somebody weakens write ordering. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Remove redundant bit shifting from intel_gmbus_set_speedAdam Jackson2-8/+2
Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Rename intel_sdvo_hdmi_sink_detectAdam Jackson1-2/+2
This is general TMDS detect, not HDMI specifically. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Fix multifunction SDVO detectionAdam Jackson1-2/+1
I can't think of any sensible reason to limit this to a mask of 0x0f, ie, SDVO_OUTPUT_{TMDS,RGB,CVBS,SVID}0. Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21drm/i915: Remove "i2c_speed" nonsense from child device tableAdam Jackson4-14/+8
I have no evidence for this byte being used this way, and lots of counterexamples. Restore the struct to its empirical definition and patch up gmbus setup to match. Signed-off-by: Adam Jackson <ajax@redhat.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-21Merge branch 'fix-pch-refclk' into fooKeith Packard5-60/+115
2011-10-21Merge branch 'edp-training-fixes' into drm-intel-nextKeith Packard5-122/+414
Conflicts: drivers/gpu/drm/i915/intel_dp.c Just whitespace change conflicts