summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-12-03drm/i915/icl: push pll to port mapping/unmapping to ddi encoder hooksJani Nikula3-62/+34
Unclutter the haswell_crtc_enable() and haswell_crtc_disable() functions a bit by moving the pll to port mapping and unmapping functions to the ddi encoder hooks. This allows removal of a bunch of boilerplate code from the functions. Additionally, the ICL DSI encoder needs to do the clock gating and ungating slightly differently, and this allows its own handling in a clean fashion. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f8e2982ceea4c05dc254a0c15e2b3be1d5f271d3.1543500285.git.jani.nikula@intel.com
2018-12-03drm/omap: fix incorrect union usageSebastian Reichel1-25/+33
The DSI encoder sets dssdev->ops->dsi.set_config, which is stored at the same offset as dssdev->ops->hdmi.set_hdmi_mode. The code in omap_encoder only checks if dssdev->ops->hdmi.set_hdmi_mode is NULL. Due to the way union works, it won't be NULL if dsi.set_config is set. This means dsi_set_config will be called with config=hdmi_mode=false=NULL parameter resulting in a NULL dereference. Also the dereference happens while console is locked, so kernel hangs without any debug output without "fb.lockless_register_fb=1" parameter. This restructures the code, so that the HDMI mode is only configured for HDMI output types. Fixes: 83910ad3f51fb ("drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Tony Lindgren <tony@atomide.com> [tomi.valkeinen@ti.com: dropped the safeguard] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-5-sebastian.reichel@collabora.com
2018-12-03drm/omap: populate DSI platform bus earlierSebastian Reichel1-10/+10
After the changes from 4.20 the DSI encoder tries to find the attached panel before populating the DSI bus. If the panel is not found -EPROBE_DEFER is returned, so the DSI bus is never populated and the panel never added. Fix this by populating the DSI bus before searching for the video sink in dsi_init_output(). Fixes: 27d624527d992 ("drm/omap: dss: Acquire next dssdev at probe time") Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com
2018-12-03drm/omap: fix bus_flags for panel-dpiTomi Valkeinen2-1/+2
panel-dpi used to convey the bus-flags via the videomode, but recent changes changed the use of videomode to DRM's drm_display_mode which does not contain bus-flags. This broke panel-dpi, which didn't explicitly store the bus-flags into dssdev->bus_flags. Fix this by setting dssdev->bus_flags. Also change the bus_flags type to u32, as that is the type used in the DRM framework, and we would get a warning with drm_bus_flags_from_videomode() otherwise. Fixes: 3fbda31e814868d8477ddf52d74b7b8f596578e8 ("drm/omap: Split mode fixup and mode set from encoder enable") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181126092447.11864-1-tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-12-03drm/i915/selftests: Terminate hangcheck sanitycheck forciblyChris Wilson1-3/+9
If all else fails and we are stuck eternally waiting for the undying request, abandon all hope. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-6-chris@chris-wilson.co.uk
2018-12-03drm/i915/ringbuffer: Clear semaphore sync registers on ring initChris Wilson1-0/+7
Ensure that the sync registers are cleared every time we restart the ring to avoid stale values from creeping in from random neutrinos. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108888 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-3-chris@chris-wilson.co.uk
2018-12-03drm/meson: Fix an Alpha Primary Plane bug on Meson GXL/GXM SoCsNeil Armstrong3-0/+40
On the Amlogic GXL & GXM SoCs, a bug occurs on the primary plane when alpha is used where the alpha is not aligned with the pixel content. The workaround Amlogic implemented is to reset the OSD1 plane hardware block each time the plane is (re)enabled, solving the issue. In the reset, we still need to save the content of 2 registers which depends on the status of the plane, in addition to reload the scaler conversion matrix at the same time. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> [narmstrong: fixed typo in commit log] Link: https://patchwork.freedesktop.org/patch/msgid/20181128100734.6536-1-narmstrong@baylibre.com
2018-12-03drm/i915/gvt: Fix tiled memory decoding bug on BDWTina Zhang1-1/+1
Commit b244ffa15c8b ("drm/i915/gvt: Fix drm_format_mod value for vGPU plane") introduced a regression issue to the tiled memory decoding on BDW. This patch can fix this issue. Here is the issue detail: https://github.com/intel/gvt-linux/issues/61 v1->v2: - Refine the commit message. (Zhenyu) Fixes: b244ffa15c8b("drm/i915/gvt: Fix drm_format_mod value for vGPU plane") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-12-03drm/mediatek: Only try to attach bridge if there is oneNicolas Boichat1-4/+7
Even if dsi->bridge is NULL, we still try to call drm_bridge_attach, and print out an error message, before creating the connector. When no bridge is provided, let's skip these 2 steps and directly create the connector. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
2018-12-01drm/v3d: Fix prime imports of buffers from other drivers.Eric Anholt1-0/+1
v3d_bo_get_pages() checks this to decide to map the imported buffer instead of the backing shmem file. The caller was about to set this value anyway, and there's no error path in between. Ideally we wouldn't even allocate the shmem file for our imports, but that's a more invasive fix. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-3-eric@anholt.net Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dave Emett <david.emett@broadcom.com>
2018-12-01drm/v3d: Drop the "dev" argument to lock/unlock of BO reservations.Eric Anholt1-11/+9
They were unused, as Dave Emett noticed in TFU review. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Dave Emett <david.emett@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-2-eric@anholt.net Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-12-01drm/v3d: Add support for submitting jobs to the TFU.Eric Anholt7-51/+402
The TFU can copy from raster, UIF, and SAND input images to UIF output images, with optional mipmap generation. This will certainly be useful for media EGL image input, but is also useful immediately for mipmap generation without bogging the V3D core down. For now we only run the queue 1 job deep, and don't have any hang recovery (though I don't think we should need it, with TFU). Queuing multiple jobs in the HW will require synchronizing the YUV coefficient regs updates since they don't get FIFOed with the job. v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain why TFU is AUTH, clarify the syncing docs, drop the unused TFU interrupt regs (you're expected to use the hub's), don't take &bo->base for NULL bos. v3: Fix a little whitespace alignment (noticed by checkpatch), rebase on drm_sched_job_cleanup() changes. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Dave Emett <david.emett@broadcom.com> (v2) Link: https://patchwork.freedesktop.org/patch/264607/
2018-11-30drm/i915/psr: Get pipe id following atomic guidelinesJosé Roberto de Souza2-15/+5
As stated in struct drm_encoder, crtc field should only be used by non-atomic drivers. So here caching the pipe id in intel_psr_enable() what is way more simple and efficient than at every call to intel_psr_flush()/invalidate() get the drm.mode_config.connection_mutex lock to safely be able to get the pipe id by reading drm_connector_state.crtc. This should fix the null pointer dereference crash below as the previous way to get the pipe id was prone to race conditions. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105959 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128072838.22773-1-jose.souza@intel.com
2018-11-30drm/amdgpu: wait for IB test on first device openChristian König1-3/+3
Instead of delaying that to the first query. Otherwise we could try to use the SDMA for VM updates before the IB tests are done. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amdgpu: add VCN JPEG support amdgpu_ctx_num_entitiesAlex Deucher1-0/+1
Looks like it was missed when setting support was added. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/ttm: fix LRU handling in ttm_buffer_object_transferChristian König1-1/+3
We need to set the NO_EVICT flag on the ghost object or otherwise we are adding it to the LRU. When it is added to the LRU we can run into a race between destroying and evicting it again. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Clean up for DCN1 clock debug loggingFatemeh Darbehani5-23/+32
[Why] To prepare for clock debug logging. With the exception of removing max_supported_dppclk_khz from logs, there are no functional changes. [How] Add clk_bypass struct and clean up buffer logic Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Su Chung <Su.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: 3.2.08Steven Chiu1-1/+1
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Allow clock lower on dce100David Francis1-1/+13
dce100 was set to always pass safe_to_lower = false to the clock manager Thus, on suspend the clocks were not being set to 0 which is incorrect behaviour This was causing s3 resume to blackscreen on intel CPUs with dce100 GPUs attached (Note that the hash in this Fixes: tag is the hash on Alex's tree) Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead") Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Program dithering if requestedSivapiriyanKumarasamy2-0/+9
Dithering needs to be enabled or disabled as requested. If dc_stream_update->dither_option is non-null, program the FMT blocks. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Copy crc_enabled when duplicating dm_crtc_stateNicholas Kazlauskas1-0/+1
[Why] When running igt@kms_plane@pixel-format-pipe-* tests the CRC read will time out and the test will fail. This is because the CRTC is duplicated but the crc_enabled parameter isn't copied over to the new dm_crtc_state. CRC reads will time out because amdgpu_dm_crtc_handle_crc_irq will no longer call drm_crtc_add_crc_entry. [How] Copy crc_enabled when duplicating the state. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Add customizable tracing eventChiawen Huang1-0/+1
[why] add customizable log with a message input, which is for adding test log in debugging as printf function in ETW. [Usage] EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC); Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Re-arrange GFX9 fieldsNevenko Stupar1-3/+4
For more clear usage in future Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: fbc state could not reach while enable fbchersen wu3-83/+66
[WHY] fbc is within the data path from memory to dce. while re-configure mc dmif, fbc should be enabled. otherwise, fbc may not be enabled properly. [HOW] before re-configure mc dmif, disable fbc, only after dmif re-configuration fully done, enable fbc again. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Info frame cleanupHarmanprit Tatla7-142/+42
* Use provided infopacket in stream (if valid) instead of reconstructing in set_vendor_info_packet() * Use proper format for enums * Use dc info packet struct instead Signed-off-by: Harmanprit Tatla <Harmanprit.Tatla@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: CTS 4.2.2.7abdoulaye berthe1-1/+1
[Why] Failure to read Detailed Capabilities Info. [How] Read Detailed Capbilities Info 80h-08Fh. Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Fix spelling of axis in modules/color/color_gamma.cKrunoslav Kovac1-8/+8
Use axis instead of axix Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Remove unused panel patch "disconnect_delay"Joshua Aberback1-1/+0
[Why] This patch is for use by dm, no need for it in dc. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Start documentation of DCDavid Francis6-13/+135
[Why] There are a lot of unintuitive parts of the dm-dc interface. It would help us if these were documented to provide a common understanding of what they are supposed to do [How] Most of this documentation is stubs, to be filled out more thoroughly by the experts Not every dm-accessible function and struct is mentioned. Simple functions like getters, setters, retain, release, create, destroy can be left unadorned. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: 3.2.07Steven Chiu1-1/+1
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: fix sporadic multiple aux transaction failureYogesh Mohan Marimuthu2-51/+21
[why] When there are multiple aux transaction in parallel, it is sometime sporadically the aux transaction starts to continuously fail. The aux transaction was failing because the busy bit for the given gpio pin was always set. The busy bit was alway set because the programming sequence to read, modify and write busy bit was not atomic. Due to which when multiple threads are trying to modify the busy bits for their gpio pins in the same integer variable sometimes the busy bits integer variable is written with old data causing failure. [how] Instead of using individual bits to track gpio pins and grouping them to integers, one byte will be allcoated for each gpio pin. Now whenever a gpio pin needs to be set to mark being used, only writing a value of one to that byte is sufficient, other bytes are not impacted. Also no need to have atomicity with bytes unlike with bits. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amdgpu: wait for IB test on first device openChristian König1-3/+3
Instead of delaying that to the first query. Otherwise we could try to use the SDMA for VM updates before the IB tests are done. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amdgpu: add VCN JPEG support amdgpu_ctx_num_entitiesAlex Deucher1-0/+1
Looks like it was missed when setting support was added. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amdgpu: don't expose fan attributes on APUsAlex Deucher1-0/+13
They don't have a fan controller. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amdgpu: Fix num_doorbell calculation issueOak Zeng1-2/+5
When paging queue is enabled, it use the second page of doorbell. The AMDGPU_DOORBELL64_MAX_ASSIGNMENT definition assumes all the kernel doorbells are in the first page. So with paging queue enabled, the total kernel doorbell range should be original num_doorbell plus one page (0x400 in dword), not *2. Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/ttm: fix LRU handling in ttm_buffer_object_transferChristian König1-1/+3
We need to set the NO_EVICT flag on the ghost object or otherwise we are adding it to the LRU. When it is added to the LRU we can run into a race between destroying and evicting it again. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: Fix NULL ptr deref for commit_planes_to_streamNicholas Kazlauskas1-1/+1
[Why] With scaling, underscan and abm changes we can end up calling commit_planes_to_stream in commit_tail. This call uses dm_state->context which can be NULL if the commit was a fast update. [How] Use dc_state instead since that can't be NULL unless the system ran out of memory. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108912 Fixes: e64abff2f133 ("drm/amd/display: Use private obj helpers for dm_atomic_state") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/msm: Grab a vblank reference when waiting for commit_doneSean Paul1-0/+5
Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-11-30drm/msm/dsi: configure VCO rate for 10nm PLL driverAbhinav Kumar1-1/+3
Currenty the VCO rate in the 10nm PLL driver relies on the parent rate which is not configured. Configure the VCO rate to 19.2 Mhz as required by the 10nm PLL driver. Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-11-30drm/msm: fix handling of cmdstream offsetRob Clark1-1/+4
Userspace hasn't used submit cmds with submit_offset != 0 for a while, but this starts cropping up again with cmdstream sub-buffer-allocation in libdrm_freedreno. Doesn't do much good to increment the buf ptr before assigning it. Fixes: 78b8e5b847b4 drm/msm: dump a rd GPUADDR header for all buffers in the command Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30drm/msm/gpu: Fix a couple memory leaks in debugfsDan Carpenter1-4/+11
The msm_gpu_open() function should free "show_priv" on error or it causes static checker warnings. Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30drm/msm: Fix task dump in gpu recoverySharat Masetty1-5/+4
The current recovery code gets a pointer to the task struct and does a few things all within the rcu_read_lock. This puts constraints on the types of gfp flags that can be used within the rcu lock. This patch instead gets a reference to the task within the rcu lock and releases the lock immediately, this way the task stays afloat until we need it and we also get to use the desired gfp flags. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30drm/msm: Check if target supports crash dump captureSharat Masetty1-0/+4
This patch simply checks first to see if the target can support crash dump capture before proceeding. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30drm/bridge: fix AUX_CMD_SEND bit value for ti, sn65dsi86 bridgeSandeep Panda1-1/+1
Fix the AUX_CMD_SEND bit for ti,sn65dsi86 bridge chip. With wrong value the dpcd aux transactions with eDP panel are failing. Signed-off-by: Sandeep Panda <spanda@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181130092745.4219-1-spanda@codeaurora.org
2018-11-30drm: Fix up drm_atomic_state_helper.[hc] extractionDaniel Vetter2-157/+157
I've misplaced two functions by accident: - drm_atomic_helper_duplicate_state is really part of the resume/suspend/shutdown device-wide helpers. - drm_atomic_helper_legacy_gamma_set is part of the legacy ioctl compat helpers. Move them both back. Fixes: 9ef8a9dc4b21 ("drm: Extract drm_atomic_state_helper.[hc]") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128100728.4674-1-daniel.vetter@ffwll.ch
2018-11-30drm/i915/selftests: Fix live_workarounds to actually do resetsTvrtko Ursulin1-12/+53
The test was missing some magic ingredients to actually trigger the resets. In case of the full reset we need the I915_RESET_HANDOFF flag set, and in case of engine reset we need a busy request. Thanks to Chris for helping with reset magic. v2: * Grab RPM ref over reset. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181130095211.23849-1-tvrtko.ursulin@linux.intel.com
2018-11-30drm/i915/selftests: Extract spinner codeTvrtko Ursulin4-250/+290
Pull out spinner code to a standalone file to enable it to be shortly used by other and new test cases. Plain code movement - no functional changes. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181130080254.15383-1-tvrtko.ursulin@linux.intel.com
2018-11-30drm: Fix compiler warning in drm_atomic_helper.cSean Paul1-0/+3
Kbuild was complaining about: >> drivers/gpu/drm/drm_atomic_helper.c:3169:27: warning: 'state' may be used uninitialized in this function [-Wmaybe-uninitialized] Now state can't actually be used uninitialized, but we'll assign a value anyways so it stops bellyaching. Kbuild config: link: https://lists.01.org/pipermail/kbuild-all/2018-November/055374.html tree: git://anongit.freedesktop.org/drm/drm-misc for-linux-next head: b7ea04d299c78b6cf96ab281a1683ff62a74f969 commit: b7ea04d299c78b6cf96ab281a1683ff62a74f969 [4/4] drm: Add DRM_MODESET_LOCK_BEGIN/END helpers config: x86_64-randconfig-x017-201847 (attached as .config) compiler: gcc-7 (Debian 7.3.0-1) 7.3.0 reproduce: git checkout b7ea04d299c78b6cf96ab281a1683ff62a74f969 # save the attached .config to linux build tree make ARCH=x86_64 Fixes: b7ea04d299c7 ("drm: Add DRM_MODESET_LOCK_BEGIN/END helpers") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> [seanpaul added extra details on airlied's suggestion] Link: https://patchwork.freedesktop.org/patch/msgid/20181129203652.223634-1-sean@poorly.run
2018-11-30drm/i915/icl: Remove Wa_1604302699Tvrtko Ursulin1-5/+0
It seems that the documentation does not reference this any more, plus, bit 28 does not stick when written to the register. Therefore I can only assume this is something which was documented in the past but got removed from the hardware in the meantime. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129134630.8222-1-tvrtko.ursulin@linux.intel.com
2018-11-30drm/i915: Remove whitelist application from ringbuffer backendTvrtko Ursulin1-2/+0
There is no white-listing before Gen8 and after the removal ringbuffer support for these platforms we can remove the call to this no-op. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181129134128.7994-1-tvrtko.ursulin@linux.intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 15:29:25 +0300