summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-11-09drm/i915: Fix hpd handling for pins with two encodersVille Syrjälä1-13/+42
In my haste to remove irq_port[] I accidentally changed the way we deal with hpd pins that are shared by multiple encoders (DP and HDMI for pre-DDI platforms). Previously we would only handle such pins via ->hpd_pulse(), but now we queue up the hotplug work for the HDMI encoder directly. Worse yet, we now count each hpd twice and this increment the hpd storm count twice as fast. This can lead to spurious storms being detected. Go back to the old way of doing things, ie. delegate to ->hpd_pulse() for any pin which has an encoder with that hook implemented. I don't really like the idea of adding irq_port[] back so let's loop through the encoders first to check if we have an encoder with ->hpd_pulse() for the pin, and then go through all the pins and decided on the correct course of action based on the earlier findings. I have occasionally toyed with the idea of unifying the pre-DDI HDMI and DP encoders into a single encoder as well. Besides the hotplug processing it would have the other benefit of preventing userspace from trying to enable both encoders at the same time. That is simply illegal as they share the same clock/data pins. We have some testcases that will attempt that and thus fail on many older machines. But for now let's stick to fixing just the hotplug code. Cc: stable@vger.kernel.org # 4.19+ Cc: Lyude Paul <lyude@redhat.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2018-11-09drm/vc4: Prefer PPF over TPZ when dst >= 2/3 srcBoris Brezillon1-4/+4
The HVS spec recommends using PPF when the downscaling ratio is between 2/3 and 1. Let's modify vc4_get_scaling_mode() to follow this recommendation. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-2-boris.brezillon@bootlin.com
2018-11-09drm/vc4: ->x_scaling[1] should never be set to VC4_SCALING_NONEBoris Brezillon1-5/+7
For the YUV conversion to work properly, ->x_scaling[1] should never be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE into VC4_SCALING_PPF when that happens. The old ->x_scaling[0] adjustment is dropped as I couldn't find any mention to this constraint in the spec and it's proven to be unnecessary (I tested various multi-planar YUV formats with scaling disabled, and all of them worked fine without this adjustment). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.com
2018-11-09drm/i915/icl: Fix PLL mapping sanitization for DP portsImre Deak1-2/+25
We shouldn't consider an encoder inactive if it doesn't have a CRTC linked, but has virtual MST encoders with a crtc linked. Fix this. Also we should not sanitize the mapping for MST encoders, as it's always their primary encoder (which could be even in SST mode) whose active state determines if we need the clock being enabled for the corresponding physical port. Fix this too. This fixes at least an existing breakage where we incorrectly disabled the clock for an active DP encoder when sanitizing its MST virtual encoders. Not sure if there are BIOSes that enable an output in MST mode, but our HW readout is mostly missing for it anyway, so just warn for that case. Fixes: 70332ac539c5 ("drm/i915/icl+: Sanitize port to PLL mapping") Cc: Antonio Argenziano <antonio.argenziano@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reported-by: Antonio Argenziano <antonio.argenziano@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Tested-by: Clint Taylor <Clinton.A.Taylor@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107200836.10191-2-imre.deak@intel.com
2018-11-09drm/i915/ddi: Add more sanity check to the encoder HW readoutImre Deak1-24/+52
Check for reserved register field values and conflicting transcoder->port mappings (both MST and non-MST mappings or multiple SST mappings). This is also needed for the next patch to determine if a port is in MST mode during sanitization after HW readout. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Antonio Argenziano <antonio.argenziano@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107200836.10191-1-imre.deak@intel.com
2018-11-09drm/i915: Track rcu_head for our idle workerChris Wilson1-0/+3
While our little rcu worker might be able to be replaced now by the dedicated rcu_work, in the meantime we should mark up the rcu_head for correct debugobjects tracking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108092101.27598-2-chris@chris-wilson.co.uk
2018-11-09drm/i915: Initialise the obj->rcu headChris Wilson1-0/+9
Make the rcu_head known to the system, in particular for debugobjects. And having declared it for debugobjects, we need to tidy up afterwards. v2: mark the obj->rcu as being destroyed when we reuse its location for the freed list. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108691 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109090311.15321-1-chris@chris-wilson.co.uk
2018-11-09drm/sun4i: tcon: Support an active-low DE signal with RGB interfacePaul Kocialkowski2-1/+7
Some panels need an active-low data enable (DE) signal for the RGB interface. This requires flipping a bit in the TCON0 polarity register when setting up the mode for the RGB interface. Match the associated bus flag and use it to set the polarity inversion bit for the DE signal when required. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-4-contact@paulk.fr
2018-11-09drm/sun4i: tcon: Get the connector from the encoder in RGB setupPaul Kocialkowski1-12/+7
Features such as dithering and pixel data edge configuration currently rely on the panel registered with the TCON driver. However, bridges are also supported in addition to panels for RGB setup. Instead of retrieving the connector from the panel, get it from the encoder with the dedicated helper. Even in the case of bridges, the connector is registered with the encoder from our driver and is accessible when iterating connectors. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-3-contact@paulk.fr
2018-11-09drm/sun4i: tcon: Pass encoder to RGB setup functionPaul Kocialkowski1-1/+2
Passing the encoder to the TCON RGB setup functions allows accessing the connector from the encoder directly instead of relying on the panel. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-2-contact@paulk.fr
2018-11-09drm/i915: Keep overlay functions naming consistentJosé Roberto de Souza4-6/+6
All other overlay functions(almost all other functions in i915) follow intel_overlay_verb, so renaming overlay ones that do not match that. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-4-jose.souza@intel.com
2018-11-09drm/i915: Move intel_init_ipc() call to i915_load_modeset_init()José Roberto de Souza1-2/+2
IPC is a display feature, so i915_load_modeset_init() is the right place to initialize it. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-3-jose.souza@intel.com
2018-11-09drm/i915: Move FBC init and cleanup calls to modeset functionsJosé Roberto de Souza3-3/+4
Although FBC helps save power it do not belongs to power management also the cleanup was placed in i915_driver_unload() also not a good place. intel_modeset_init()/intel_modeset_cleanup() are better places also this will help make easy disable features that depends in display being enabled in driver. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-2-jose.souza@intel.com
2018-11-09drm/i915: Move drm_vblank_init() to i915_load_modeset_init()José Roberto de Souza1-12/+7
i915_load_modeset_init() is a more suitable place than i915_driver_load() as vblank is part of modeset. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108001647.11276-1-jose.souza@intel.com
2018-11-09drm/i915: remove padding from struct skl_wm_levelPaulo Zanoni1-1/+1
This reduces the size of struct skl_wm_level from 6 to 4, which reduces the size of struct skl_plane_wm from 104 to 70, which reduces the size of struct skl_pipe_wm from 524 to 356. A reduction of 168 padding bytes per pipe. This will increase even more the next time we bump I915_MAX_PLANES. v2: Paste the pahole output provided by Lucas: $ pahole -s -C skl_wm_level drivers/gpu/drm/i915/i915.o struct skl_wm_level { bool plane_en; /* 0 1 */ /* XXX 1 byte hole, try to pack */ uint16_t plane_res_b; /* 2 2 */ uint8_t plane_res_l; /* 4 1 */ /* size: 6, cachelines: 1, members: 3 */ /* sum members: 4, holes: 1, sum holes: 1 */ /* padding: 1 */ /* last cacheline: 6 bytes */ }; Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016220133.26991-3-paulo.r.zanoni@intel.com
2018-11-09drm/i915: Set MI_INVALIDATE_BSD for all video-decode enginesChris Wilson1-1/+1
We have multiple instances of VCS but only remember to invalidate the BSD caches on the first, ignoring the stale caches of any other engine. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108140039.12254-1-chris@chris-wilson.co.uk
2018-11-09drm/radeon: remove set but not used variable 'rdev'Yue Haibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_unref': drivers/gpu/drm/radeon/radeon_object.c:317:24: warning: variable 'rdev' set but not used [-Wunused-but-set-variable] It not used any more after commit e7e31600d3e2 ("drm/radeon: remove taking mclk_lock from radeon_bo_unref") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amdgpu/sdma4: use paging queue for buffer funcsAlex Deucher1-1/+11
Use the paging queue for buffer functions to avoid contention with the other queues. Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Chen Gong <Curry.Gong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amd/powerplay: correct code styleJim Qu1-90/+45
Whitespace cleanup. Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/i915/icl: Fix port B combo PHY context loss after DC transitionsImre Deak1-0/+8
On ICL DMC/PCODE retains the HW context only for port A across DC transitions, for the other port B combo PHY, it doesn't. So we need to do this manually after exiting from DC6. Do the reinit even after exiting from DC5, it won't hurt since we only reinit the PHY in case it's needed (in case it was disabled to begin with). As can be guessed from the bugzilla report leaving the PHY uninited will lead to a later timeout during the port B specific AUX and DDI_IO power well enabling. v2: - Apply the fix on all GEN>=11 platforms. (Rodrigo) Bspec: 21257 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108070 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-6-imre.deak@intel.com
2018-11-08drm/i915/icl: Skip init for an already enabled combo PHYImre Deak1-0/+6
Bspec says we should skip the initialization of combo PHYs that are already initialized. We'll need to reinit the PHYs more frequently when exiting from DC6 (after the next patch), so let's make sure the uninit sequence complies with the spec. For safety skip the init only if all the PHY register fields have their expected values. v2: - Print 'Port X' as we do elsewhere instead of 'Port-X'. (Jose) Bspec: 21257 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-5-imre.deak@intel.com
2018-11-08drm/i915/cnl+: Verify combo PHY HW state during PHY uninitImre Deak1-2/+101
Verify on CNL, ICL that the combo PHY HW state stayed intact after PHY initialization. v2: - Print 'Port X' as we do elsewhere instead of 'Port-X'. (Jose) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-4-imre.deak@intel.com
2018-11-08drm/i915/cnl+: Move the combo PHY init/uninit code to a new fileImre Deak4-119/+156
Similarly to the GEN9_LP DPIO PHY code keep the CNL+ combo PHY code in a separate file. No functional change. v2: - Use SPDX license tag instead of boilerplate. (Rodrigo) v3: - Use MIT instead of GPL-2.0 license. (Ville) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-3-imre.deak@intel.com
2018-11-08drm/i915/icl: Fix combo PHY uninitImre Deak1-0/+4
BSpec says to clear the comp init HW flag too during combo PHY uninit, so do that. The lack of this could badly interact with the PHY reinit after a DC6/9 transition at least, where (after a follow-up patch fixing the init code) we'd skip the initialization incorrectly due to this flag being set. BSpec: 21257 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-2-imre.deak@intel.com
2018-11-08drm/i915/execlists: Force write serialisation into context image vs executionChris Wilson1-1/+13
Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org
2018-11-08drm/syncobj: disable the timeline UAPI for now v2Christian König1-0/+4
Until we have sorted out all problems. v2: return -EINVAL during create if flag is set. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/260937/
2018-11-08drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()Lyude Paul1-5/+0
[why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/display: Drop reusing drm connector for MSTJerry (Fangzhi) Zuo2-35/+7
[why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/display: Cleanup MST non-atomic code workaroundJerry (Fangzhi) Zuo3-46/+4
[why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabledEvan Quan1-20/+17
With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/powerplay: set a default fclk/gfxclk ratioEvan Quan3-1/+19
Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher1-1/+2
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher1-0/+3
Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher1-0/+1
Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: add DC feature mask module parameterAlex Deucher3-0/+16
Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher1-1/+6
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: disable page queue on Vega10 SR-IOV VFTrigger Huang1-1/+4
Currently, SDMA page queue is not used under SR-IOV VF, and this queue will cause ring test failure in amdgpu module reload case. So just disable it. Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: set Vega20 LBPW as disabled at defaultEvan Quan1-0/+14
For Vega20, LBPW feature is disabled at default. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabledEvan Quan1-20/+17
With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/powerplay: set a default fclk/gfxclk ratioEvan Quan3-1/+19
Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/ttm: Fix bo_global and mem_global kfree errorTrigger Huang2-10/+0
ttm_bo_glob and ttm_mem_glob are defined as structure instance, while not allocated by kzalloc, so kfree should not be invoked to release them anymore. Otherwise, it will cause the following kernel BUG when unloading amdgpu module [ 48.419294] kernel BUG at /build/linux-5s7Xkn/linux-4.15.0/mm/slub.c:3894! [ 48.419352] invalid opcode: 0000 [#1] SMP PTI [ 48.419387] Modules linked in: amdgpu(OE-) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq snd_seq_device snd_timer aesni_intel snd soundcore joydev aes_x86_64 crypto_simd glue_helper cryptd input_leds mac_hid serio_raw binfmt_misc nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too psmouse i2c_piix4 8139cp mii floppy pata_acpi [ 48.419782] CPU: 1 PID: 1281 Comm: modprobe Tainted: G OE 4.15.0-20-generic #21-Ubuntu [ 48.419838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 48.419901] RIP: 0010:kfree+0x137/0x180 [ 48.419934] RSP: 0018:ffffb02101273bf8 EFLAGS: 00010246 [ 48.419974] RAX: ffffeee1418ad7e0 RBX: ffffffffc075f100 RCX: ffff8fed7fca7ed0 [ 48.420025] RDX: 0000000000000000 RSI: 000000000003440e RDI: 0000000022400000 [ 48.420073] RBP: ffffb02101273c10 R08: 0000000000000010 R09: ffff8fed7ffd3680 [ 48.420121] R10: ffffeee1418ad7c0 R11: ffff8fed7ffd3000 R12: ffffffffc075e2c0 [ 48.420169] R13: ffffffffc074ec10 R14: ffff8fed73063900 R15: ffff8fed737428e8 [ 48.420216] FS: 00007fdc912ec540(0000) GS:ffff8fed7fc80000(0000) knlGS:0000000000000000 [ 48.420267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.420308] CR2: 000055fa40c30060 CR3: 000000023470a006 CR4: 00000000003606e0 [ 48.420358] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.420405] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.420452] Call Trace: [ 48.420485] ttm_bo_global_kobj_release+0x20/0x30 [amdttm] [ 48.420528] kobject_release+0x6a/0x180 [ 48.420562] kobject_put+0x28/0x50 [ 48.420595] ttm_bo_global_release+0x36/0x50 [amdttm] [ 48.420636] amdttm_bo_device_release+0x119/0x180 [amdttm] [ 48.420678] ? amdttm_bo_clean_mm+0xa6/0xf0 [amdttm] [ 48.420760] amdgpu_ttm_fini+0xc9/0x180 [amdgpu] [ 48.420821] amdgpu_bo_fini+0x12/0x40 [amdgpu] [ 48.420889] gmc_v9_0_sw_fini+0x40/0x50 [amdgpu] [ 48.420947] amdgpu_device_fini+0x36f/0x4c0 [amdgpu] [ 48.421007] amdgpu_driver_unload_kms+0xb4/0x150 [amdgpu] [ 48.421058] drm_dev_unregister+0x46/0xf0 [drm] [ 48.421102] drm_dev_unplug+0x12/0x70 [drm] Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()Lyude Paul1-5/+0
[why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/display: Drop reusing drm connector for MSTJerry (Fangzhi) Zuo2-35/+7
[why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amd/display: Cleanup MST non-atomic code workaroundJerry (Fangzhi) Zuo3-46/+4
[why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu: fix frame size of amdgpu_xgmi_add_devices excceed 1024 bytesHawking Zhang1-5/+8
Instead of stack-allocated psp_xgmi_topology_info in function amdgpu_xgmi_add_device, dynamically allocated this structure to avoid the frame size of this function excceed 1024 bytes Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm: Fix htmldocs warnings in drm_fourcc.cSean Paul1-1/+1
Add a description for dev and remove the excess one for native. Fixes the following warnings: ../drivers/gpu/drm/drm_fourcc.c:112: warning: Function parameter or member 'dev' not described in 'drm_driver_legacy_fb_format' ../drivers/gpu/drm/drm_fourcc.c:112: warning: Excess function parameter 'native' description in 'drm_driver_legacy_fb_format' Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181107205546.216088-1-sean@poorly.run
2018-11-07drm/i915/icl: Fix power well 2 wrt. DC-off toggling orderImre Deak1-6/+6
To enable DC5/6 power well 2 has to be disabled as for previous platforms, so fix things up. Bspec: 4234 Fixes: 67ca07e7ac10 ("drm/i915/icl: Add power well support") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com
2018-11-07drm/i915: Add short HPD IRQ storm detection for non-MST systemsLyude Paul4-21/+115
Unfortunately, it seems that the HPD IRQ storm problem from the early days of Intel GPUs was never entirely solved, only mostly. Within the last couple of days, I got a bug report from one of our customers who had been having issues with their machine suddenly booting up very slowly after having updated. The amount of time it took to boot went from around 30 seconds, to over 6 minutes consistently. After some investigation, I discovered that i915 was reporting massive amounts of short HPD IRQ spam on this system from the DisplayPort port, despite there not being anything actually connected. The symptoms would start with one "long" HPD IRQ being detected at boot: [ 1.891398] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00440000, dig 0x00440000, pins 0x000000a0 [ 1.891436] [drm:intel_hpd_irq_handler [i915]] digital hpd port B - long [ 1.891472] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 0 [ 1.891508] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - long [ 1.891544] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 7 - cnt: 0 [ 1.891592] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port B - long [ 1.891628] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port D - long … followed by constant short IRQs afterwards: [ 1.895091] [drm:intel_encoder_hotplug [i915]] [CONNECTOR:66:DP-1] status updated from unknown to disconnected [ 1.895129] [drm:i915_hotplug_work_func [i915]] Connector DP-3 (pin 7) received hotplug event. [ 1.895165] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-3] [ 1.895275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.895312] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.895762] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.895799] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.896239] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450085 [ 1.896293] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.896330] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.896781] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 [ 1.896817] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short [ 1.897275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080 The customer's system in question has a GM45 GPU, which is apparently well known for hotplugging storms. So, workaround this impressively broken hardware by changing the default HPD storm threshold from 5 to 50. Then, make long IRQs count for 10, and short IRQs count for 1. This makes it so that 5 long IRQs will trigger an HPD storm, and on systems with short HPD storm detection 50 short IRQs will trigger an HPD storm. 50 short IRQs amounts to 100ms of constant pulsing, which seems like a good middleground between being too sensitive and not being sensitive enough (which would cause visible stutters in userspace every time a storm occurs). And just to be extra safe: we don't enable this by default on systems with MST support. There's too high of a chance of MST support triggering storm detection, and systems that are new enough to support MST are a lot less likely to have issues with IRQ storms anyway. As a note: this patch was tested using a ThinkPad T450s and a Chamelium to simulate the short IRQ storms. Changes since v1: - Don't use two separate thresholds, just make long IRQs count for 10 each and short IRQs count for 1. This simplifies the code a bit - Ville Syrjälä Changes since v2: - Document @long_hpd in intel_hpd_irq_storm_detect, no functional changes Changes since v4: - Remove !! in long_hpd assignment - Ville Syrjälä - queue_hp = true - Ville Syrjälä Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-6-lyude@redhat.com
2018-11-07drm/i915: Clarify flow for disabling IRQs on stormsLyude Paul1-3/+8
This is rather confusing to look at as-is: dev_priv->display.hpd_irq_setup(dev_priv); in intel_hpd_irq_handler() handles disabling the actual HPD IRQ, while intel_hpd_irq_storm_disable() handles moving the HPD pin state over from MARK_DISABLED to DISABLED along with enabling polling for it. Changes since v3: - Rename i915_hpd_irq_storm_disable() to i915_hpd_irq_storm_switch_to_polling() - Rodrigo Vivi Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-5-lyude@redhat.com
2018-11-07drm/i915: Fix threshold check in intel_hpd_irq_storm_detect()Lyude Paul1-10/+13
Currently in intel_hpd_irq_storm_detect() when we detect that the last recorded hotplug wasn't within the period defined by HPD_STORM_DETECT_DELAY, we make the mistake of resetting the HPD count to 0 without incrementing it. This results in us only enabling storm detection when we go +2 above the threshold, e.g. an HPD threshold of 5 would not trigger a storm until we reach a total of 7 hotplugs. So: rework the code a bit so we reset the HPD count when HPD_STORM_DETECT_DELAY has passed, then increment the count afterwards. Also, clean things up a bit to make it easier to undertand. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-4-lyude@redhat.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 18:01:19 +0300