summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-05-31drm/sun4i: dsi: Enforce boundaries on the start delayMaxime Ripard1-1/+5
[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ] The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/sun4i: dsi: Change the start delay calculationMaxime Ripard1-1/+3
[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ] The current calculation for the video start delay in the current DSI driver is that it is the total vertical size, minus the front porch and sync length, plus 1. This equals to the active vertical size plus the back porch plus 1. That 1 is coming in the Allwinner BSP from an variable that is set to 1. However, if we look at the Allwinner BSP more closely, and especially in the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can see that this variable is actually computed from the porches and the sync minus 10, clamped between 8 and 100. This fixes the start delay symptom we've seen on some panels (vblank timeouts with vertical white stripes at the bottom of the panel). Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm: Wake up next in drm_read() chain if we are forced to putback the eventChris Wilson1-0/+1
[ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ] After an event is sent, we try to copy it into the user buffer of the first waiter in drm_read() and if the user buffer doesn't have enough room we put it back onto the list. However, we didn't wake up any subsequent waiter, so that event may sit on the list until either a new vblank event is sent or a new waiter appears. Rare, but in the worst case may lead to a stuck process. Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/drv: Hold ref on parent device during drm_device lifetimeNoralf Trønnes1-1/+4
[ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ] This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/v3d: Handle errors from IRQ setup.Eric Anholt3-5/+18
[ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ] Noted in review by Dave Emett for V3D 4.2 support. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/omap: dsi: Fix PM for display blank with paired dss_pll callsTony Lindgren1-29/+31
[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ] Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves the DSS clocks enabled when the display is blanked wasting about extra 5mW of power while idle. The clock that is left on by not calling dss_pll_disable() is DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for DSI PLL. We can fix this issue by by making the current dsi_pll_uninit() into dsi_pll_disable(). This way we can just call dss_pll_disable() from dsi_display_uninit_dsi() and the code becomes a bit easier to follow. However, we need to also consider that DSI PLL can be muxed for DVI too as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI case, we want to unconditionally disable the clocks. To get around this issue, we separate out the DSI lane handling from dsi_pll_enable() and dsi_pll_disable() as suggested by Tomi in an earlier experimental patch. So we must only toggle the DSI regulator based on the vdds_dsi_enabled flag from dsi_display_init_dsi() and dsi_display_uninit_dsi(). We need to make these two changes together to avoid breaking things for DVI when fixing the DSI clock handling. And this all causes a slight renumbering of the error path for dsi_display_init_dsi(). Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Set stream->mode_changed when connectors changeNicholas Kazlauskas1-2/+1
[ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ] [Why] The kms_plane@plane-position-covered-pipe-*-planes subtests can produce a sequence of atomic commits such that neither active_changed nor mode_changed but connectors_changed. When this happens we remove the old stream from the context and add a new stream but the new stream doesn't have mode_changed=true set. This incorrect programming sequence causes CRC mismatches to occur in the test. The stream->mode_changed value should be set whenever a new stream is created. [How] A new stream is created whenever drm_atomic_crtc_needs_modeset is true. We previously covered the active_changed and mode_changed conditions for the CRTC but connectors_changed is also checked within drm_atomic_crtc_needs_modeset. So just use drm_atomic_crtc_needs_modeset directly to determine the mode_changed flag. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Fix Divide by 0 in memory calculationsMurton Liu1-5/+15
[ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ] Check if we get any values equal to 0, and set to 1 if so. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfersNoralf Trønnes2-19/+45
[ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ] Buffers passed to spi_sync() must be dma-safe even for tiny buffers since some SPI controllers use DMA for all transfers. Example splat with CONFIG_DMA_API_DEBUG enabled: [ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d] [ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190 [ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm [ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236 [ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190 [ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54 [ 23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286 [ 23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006 [ 23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450 [ 23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0 [ 23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c [ 23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001 [ 23.750679] FS: 0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690 [ 23.750686] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0 [ 23.750696] Call Trace: [ 23.750713] debug_dma_map_sg+0x100/0x340 [ 23.750727] ? dma_direct_map_sg+0x3b/0xb0 [ 23.750739] spi_map_buf+0x25a/0x300 [ 23.750751] __spi_pump_messages+0x2a4/0x680 [ 23.750762] __spi_sync+0x1dd/0x1f0 [ 23.750773] spi_sync+0x26/0x40 [ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi] [ 23.750802] ? spi_finalize_current_transfer+0x10/0x10 [ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi] Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: fix releasing planes when exiting odmDmytro Laktyushkin1-2/+4
[ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ] Releasing planes should not release the 2nd odm pipe right away, this change leaves us with 2 pipes with null planes and same stream when planes are released during odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/panel: otm8009a: Add delay at the end of initializationYannick Fertré1-0/+3
[ Upstream commit 0084c3c71126fc878c6dab8a6ab8ecc484c2be02 ] At the end of initialization, a delay is required by the panel. Without this delay, the panel could received a frame early & generate a crash of panel (black screen). Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/pl111: fix possible object reference leakWen Yang1-0/+4
[ Upstream commit bc29d3a69d4c1bd1a103e8b3c1ed81b807c1870b ] The call to of_find_matching_node_and_match returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD) Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS) Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amdgpu: fix old fence check in amdgpu_fence_emitChristian König1-7/+17
[ Upstream commit 3d2aca8c8620346abdba96c6300d2c0b90a1d0cc ] We don't hold a reference to the old fence, so it can go away any time we are waiting for it to signal. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm: etnaviv: avoid DMA API warning when importing buffersRussell King2-0/+6
[ Upstream commit 1262cc8893ecb0eb2c21e042d0d268cc180edb61 ] During boot, I get this kernel warning: WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536] Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000 caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14) [<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4) [<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124) [<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48) [<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc) [<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c) [<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c) [<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104) [<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c) [<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c) [<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8) [<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0) [<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48) [<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60) [<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd81a9fa8 to 0xd81a9ff0) 9fa0: b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600 9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8 9fe0: b6989f18 bec613dc b697185c b667be5c irq event stamp: 47905 hardirqs last enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680 hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680 softirqs last enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540 softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144 ---[ end trace af477747acbcc642 ]--- The reason is the contiguous buffer exceeds the default maximum segment size of 64K as specified by dma_get_max_seg_size() in linux/dma-mapping.h. Fix this by providing our own segment size, which is set to 2GiB to cover the window found in MMUv1 GPUs. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/msm: a5xx: fix possible object reference leakWen Yang1-4/+6
[ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sharat Masetty <smasetty@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/nouveau/bar/nv50: ensure BAR is mappedJon Derrick1-3/+9
[ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ] If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/sun4i: Unbind components before releasing DRM and memoryPaul Kocialkowski1-2/+3
[ Upstream commit e02bc29b2cfa7806830d6da8b2322cddd67e8dfe ] Our components may still be using the DRM device driver (if only to access our driver's private data), so make sure to unbind them before the final drm_dev_put. Also release our reserved memory after component unbind instead of before to match reverse creation order. Fixes: f5a9ed867c83 ("drm/sun4i: Fix component unbinding and component master deletion") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424090413.6918-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/imx: don't skip DP channel disable for background planeLucas Stach1-1/+1
[ Upstream commit 7bcde275eb1d0ac8793c77c7e666a886eb16633d ] In order to make sure that the plane color space gets reset correctly. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16gpu: ipu-v3: dp: fix CSC handlingLucas Stach1-3/+9
[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ] Initialize the flow input colorspaces to unknown and reset to that value when the channel gets disabled. This avoids the state getting mixed up with a previous mode. Also keep the CSC settings for the background flow intact when disabling the foreground flow. Root-caused-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/sun4i: Fix component unbinding and component master deletionPaul Kocialkowski1-0/+4
[ Upstream commit f5a9ed867c83875546c9aadd4ed8e785e9adcc3c ] For our component-backed driver to be properly removed, we need to delete the component master in sun4i_drv_remove and make sure to call component_unbind_all in the master's unbind so that all components are unbound when the master is. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-4-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/sun4i: Set device driver data at bind time for use in unbindPaul Kocialkowski1-0/+2
[ Upstream commit 02b92adbe33e6dbd15dc6e32540b22f47c4ff0a2 ] Our sun4i_drv_unbind gets the drm device using dev_get_drvdata. However, that driver data is never set in sun4i_drv_bind. Set it there to avoid getting a NULL pointer at unbind time. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-3-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/amd/display: If one stream full updates, full update all planesDavid Francis2-0/+22
[ Upstream commit c238bfe0be9ef7420f7669a69e27c8c8f4d8a568 ] [Why] On some compositors, with two monitors attached, VT terminal switch can cause a graphical issue by the following means: There are two streams, one for each monitor. Each stream has one plane current state: M1:S1->P1 M2:S2->P2 The user calls for a terminal switch and a commit is made to change both planes to linear swizzle mode. In atomic check, a new dc_state is constructed with new planes on each stream new state: M1:S1->P3 M2:S2->P4 In commit tail, each stream is committed, one at a time. The first stream (S1) updates properly, triggerring a full update and replacing the state current state: M1:S1->P3 M2:S2->P4 The update for S2 comes in, but dc detects that there is no difference between the stream and plane in the new and current states, and so triggers a fast update. The fast update does not program swizzle, so the second monitor is corrupted [How] Add a flag to dc_plane_state that forces full updates When a stream undergoes a full update, set this flag on all changed planes, then clear it on the current stream Subsequent streams will get full updates as a result Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/amd/display: extending AUX SW TimeoutMartin Leung2-6/+9
[ Upstream commit f4bbebf8e7eb4d294b040ab2d2ba71e70e69b930 ] [Why] AUX takes longer to reply when using active DP-DVI dongle on some asics resulting in up to 2000+ us edid read (timeout). [How] 1. Adjust AUX poll to match spec 2. Extend the SW timeout. This does not affect normal operation since we exit the loop as soon as AUX acks. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: fix possible object reference leakWen Yang1-0/+1
[ Upstream commit 2ae2c3316fb77dcf64275d011596b60104c45426 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in ↵Ondrej Jirman1-2/+3
sun8i_tcon_top_un/bind [ Upstream commit 1a07a94b47b1f528f39c3e6187b5eaf02efe44ea ] There are two problems here: 1. Not all clk_data->hws[] need to be initialized, depending on various configured quirks. This leads to NULL ptr deref in clk_hw_unregister_gate() in sun8i_tcon_top_unbind() 2. If there is error when registering the clk_data->hws[], err_unregister_gates error path will try to unregister IS_ERR()=true (invalid) pointer. For problem (1) I have this stack trace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: clk_hw_unregister+0x8/0x18 clk_hw_unregister_gate+0x14/0x28 sun8i_tcon_top_unbind+0x2c/0x60 component_unbind.isra.4+0x2c/0x50 component_bind_all+0x1d4/0x230 sun4i_drv_bind+0xc4/0x1a0 try_to_bring_up_master+0x164/0x1c0 __component_add+0xa0/0x168 component_add+0x10/0x18 sun8i_dw_hdmi_probe+0x18/0x20 platform_drv_probe+0x3c/0x70 really_probe+0xcc/0x278 driver_probe_device+0x34/0xa8 Problem (2) was identified by head scratching. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405233048.3823-1-megous@megous.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/amd/display: fix cursor black issuetiancyin1-0/+1
[ Upstream commit c1cefe115d1cdc460014483319d440b2f0d07c68 ] [Why] the member sdr_white_level of struct dc_cursor_attributes was not initialized, then the random value result that dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal value is 0x3c00), this cause the black cursor issue. [how] just initilize the obj of struct dc_cursor_attributes to zero to avoid the random value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: Fix an error code in mtk_hdmi_dt_parse_pdata()Dan Carpenter1-1/+0
[ Upstream commit 2d85978341e6a32e7443d9f28639da254d53f400 ] We don't want to overwrite "ret", it already holds the correct error code. The "regmap" variable might be a valid pointer as this point. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/omap: hdmi4_cec: Fix CEC clock handling for PMTony Lindgren1-7/+19
[ Upstream commit 36a1da15b5df493241b0011d2185fdd724ac1ed1 ] If CONFIG_OMAP4_DSS_HDMI_CEC is enabled in .config, deeper SoC idle states are blocked because the CEC clock gets always enabled on init. Let's fix the issue by moving the CEC clock handling to happen later in hdmi_cec_adap_enable() as suggested by Hans Verkuil <hverkuil@xs4all.nl>. This way the CEC clock gets only enabled when needed. This can be tested by doing cec-ctl --playback to enable the CEC, and doing cec-ctl --clear to disable it. Let's also fix the typo for "divider" in the comments while at it. Fixes: 8d7f934df8d8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support") Suggested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326151438.32414-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-04drm/meson: Uninstall IRQ handlerJean-Philippe Brucker1-1/+4
[ Upstream commit 2d8f92897ad816f5dda54b2ed2fd9f2d7cb1abde ] meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to use-after-free if the IRQ fires after unbind: [ 64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc ... [ 64.662001] pc : meson_irq+0x18/0x30 [meson_drm] I'm assuming that a similar problem could happen on the error path of bind(), so uninstall the IRQ handler there as well. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-2-jean-philippe.brucker@arm.com Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-04drm/meson: Fix invalid pointer in meson_drv_unbind()Jean-Philippe Brucker1-2/+2
[ Upstream commit 776e78677f514ecddd12dba48b9040958999bd5a ] meson_drv_bind() registers a meson_drm struct as the device's privdata, but meson_drv_unbind() tries to retrieve a drm_device. This may cause a segfault on shutdown: [ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197 ... [ 5194.788850] Call trace: [ 5194.791349] drm_dev_unregister+0x1c/0x118 [drm] [ 5194.795848] meson_drv_unbind+0x50/0x78 [meson_drm] Retrieve the right pointer in meson_drv_unbind(). Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.com Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-04drm: Fix drm_release() and device unplugNoralf Trønnes2-9/+3
[ Upstream commit 3f04e0a6cfebf48152ac64502346cdc258811f79 ] If userspace has open fd(s) when drm_dev_unplug() is run, it will result in drm_dev_unregister() being called twice. First in drm_dev_unplug() and then later in drm_release() through the call to drm_put_dev(). Since userspace already holds a ref on drm_device through the drm_minor, it's not necessary to add extra ref counting based on no open file handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug(). We now have this: - Userpace holds a ref on drm_device as long as there's open fd(s) - The driver holds a ref on drm_device as long as it's bound to the struct device When both sides are done with drm_device, it is released. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-04drm/tegra: hub: Fix dereference before checkThierry Reding1-1/+3
[ Upstream commit 7cf77b273a8fc51e7de622fa6691abd4436a9a6b ] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-05-02drm/vc4: Fix compilation error reported by kbuild test botMaarten Lankhorst1-1/+1
commit 462ce5d963f18b71c63f6b7730a35a2ee5273540 upstream. A pointer to crtc was missing, resulting in the following build error: drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types) drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: expected struct drm_crtc *crtc drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: got struct drm_crtc_state *state drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: kbuild test robot <lkp@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com Fixes: d08106796a78 ("drm/vc4: Fix memory leak during gpu reset.") Cc: <stable@vger.kernel.org> # v4.6+ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02Revert "drm/i915/fbdev: Actually configure untiled displays"Dave Airlie1-7/+5
commit 9fa246256e09dc30820524401cdbeeaadee94025 upstream. This reverts commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5. This commit is documented to break userspace X.org modesetting driver in certain configurations. The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed. This has been reported a few times, saying it's a userspace problem is clearly against the regression rules. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806 Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02drm/vc4: Fix memory leak during gpu reset.Maarten Lankhorst1-1/+1
commit d08106796a78a4273e39e1bbdf538dc4334b2635 upstream. __drm_atomic_helper_crtc_destroy_state does not free memory, it only cleans it up. Fix this by calling the functions own destroy function. Fixes: 6d6e50039187 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.") Cc: Eric Anholt <eric@anholt.net> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-2-maarten.lankhorst@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02drm/rockchip: fix for mailbox read validation.Damian Kos1-1/+1
[ Upstream commit e4056bbb6719fe713bfc4030ac78e8e97ddf7574 ] This is basically the same fix as in commit fa68d4f8476b ("drm/rockchip: fix for mailbox read size") but for cdn_dp_mailbox_validate_receive function. See patchwork.kernel.org/patch/10671981/ for details. Signed-off-by: Damian Kos <dkos@cadence.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27drm/amdgpu/gmc9: fix VM_L2_CNTL3 programmingAlex Deucher1-0/+1
commit 1925e7d3d4677e681cc2e878c2bdbeaee988c8e2 upstream. Got accidently dropped when 2+1 level support was added. Fixes: 6a42fd6fbf534096 ("drm/amdgpu: implement 2+1 PD support for Raven v3") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27drm/ttm: fix out-of-bounds read in ttm_put_pages() v2Christian König1-2/+3
commit a66477b0efe511d98dde3e4aaeb189790e6f0a39 upstream. When ttm_put_pages() tries to figure out whether it's dealing with transparent hugepages, it just reads past the bounds of the pages array without a check. v2: simplify the test if enough pages are left in the array (Christian). Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 5c42c64f7d54 ("drm/ttm: fix the fix for huge compound pages") Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20drm/amdkfd: use init_mqd function to allocate object for hid_mqd (CI)Kevin Wang1-51/+1
[ Upstream commit cac734c2dbd2514f14c8c6a17caba1990d83bf1d ] if use the legacy method to allocate object, when mqd_hiq need to run uninit code, it will be cause WARNING call trace. eg: (s3 suspend test) [ 34.918944] Call Trace: [ 34.918948] [<ffffffff92961dc1>] dump_stack+0x19/0x1b [ 34.918950] [<ffffffff92297648>] __warn+0xd8/0x100 [ 34.918951] [<ffffffff9229778d>] warn_slowpath_null+0x1d/0x20 [ 34.918991] [<ffffffffc03ce1fe>] uninit_mqd_hiq_sdma+0x4e/0x50 [amdgpu] [ 34.919028] [<ffffffffc03d0ef7>] uninitialize+0x37/0xe0 [amdgpu] [ 34.919064] [<ffffffffc03d15a6>] kernel_queue_uninit+0x16/0x30 [amdgpu] [ 34.919086] [<ffffffffc03d26c2>] pm_uninit+0x12/0x20 [amdgpu] [ 34.919107] [<ffffffffc03d4915>] stop_nocpsch+0x15/0x20 [amdgpu] [ 34.919129] [<ffffffffc03c1dce>] kgd2kfd_suspend.part.4+0x2e/0x50 [amdgpu] [ 34.919150] [<ffffffffc03c2667>] kgd2kfd_suspend+0x17/0x20 [amdgpu] [ 34.919171] [<ffffffffc03c103a>] amdgpu_amdkfd_suspend+0x1a/0x20 [amdgpu] [ 34.919187] [<ffffffffc02ec428>] amdgpu_device_suspend+0x88/0x3a0 [amdgpu] [ 34.919189] [<ffffffff922e22cf>] ? enqueue_entity+0x2ef/0xbe0 [ 34.919205] [<ffffffffc02e8220>] amdgpu_pmops_suspend+0x20/0x30 [amdgpu] [ 34.919207] [<ffffffff925c56ff>] pci_pm_suspend+0x6f/0x150 [ 34.919208] [<ffffffff925c5690>] ? pci_pm_freeze+0xf0/0xf0 [ 34.919210] [<ffffffff926b45c6>] dpm_run_callback+0x46/0x90 [ 34.919212] [<ffffffff926b49db>] __device_suspend+0xfb/0x2a0 [ 34.919213] [<ffffffff926b4b9f>] async_suspend+0x1f/0xa0 [ 34.919214] [<ffffffff922c918f>] async_run_entry_fn+0x3f/0x130 [ 34.919216] [<ffffffff922b9d4f>] process_one_work+0x17f/0x440 [ 34.919217] [<ffffffff922bade6>] worker_thread+0x126/0x3c0 [ 34.919218] [<ffffffff922bacc0>] ? manage_workers.isra.25+0x2a0/0x2a0 [ 34.919220] [<ffffffff922c1c31>] kthread+0xd1/0xe0 [ 34.919221] [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40 [ 34.919222] [<ffffffff92974c1d>] ret_from_fork_nospec_begin+0x7/0x21 [ 34.919224] [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40 [ 34.919224] ---[ end trace 38cd9f65c963adad ]--- Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/nouveau/volt/gf117: fix speedo readout registerIlia Mirkin4-1/+63
[ Upstream commit fc782242749fa4235592854fafe1a1297583c1fb ] GF117 appears to use the same register as GK104 (but still with the general Fermi readout mechanism). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/panel: panel-innolux: set display off in innolux_panel_unprepareHsin-Yi, Wang1-6/+5
[ Upstream commit 46f3ceaffa81e846677bca8668e0ad40e643cffd ] Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare(). This also fixes some mode check and irq timeout issue in MTK dsi code. Since some dsi code (e.g. mtk_dsi) have following call trace: 1. drm_panel_disable(), which calls innolux_panel_disable() 2. switch to cmd mode 3. drm_panel_unprepare(), which calls innolux_panel_unprepare() However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare. Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/ttm: Fix bo_global and mem_global kfree errorTrigger Huang2-10/+0
[ Upstream commit 30f33126feca0fe16df9e9302ffc28a953e2eb37 ] ttm_bo_glob and ttm_mem_glob are defined as structure instance, while not allocated by kzalloc, so kfree should not be invoked to release them anymore. Otherwise, it will cause the following kernel BUG when unloading amdgpu module [ 48.419294] kernel BUG at /build/linux-5s7Xkn/linux-4.15.0/mm/slub.c:3894! [ 48.419352] invalid opcode: 0000 [#1] SMP PTI [ 48.419387] Modules linked in: amdgpu(OE-) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq snd_seq_device snd_timer aesni_intel snd soundcore joydev aes_x86_64 crypto_simd glue_helper cryptd input_leds mac_hid serio_raw binfmt_misc nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too psmouse i2c_piix4 8139cp mii floppy pata_acpi [ 48.419782] CPU: 1 PID: 1281 Comm: modprobe Tainted: G OE 4.15.0-20-generic #21-Ubuntu [ 48.419838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 48.419901] RIP: 0010:kfree+0x137/0x180 [ 48.419934] RSP: 0018:ffffb02101273bf8 EFLAGS: 00010246 [ 48.419974] RAX: ffffeee1418ad7e0 RBX: ffffffffc075f100 RCX: ffff8fed7fca7ed0 [ 48.420025] RDX: 0000000000000000 RSI: 000000000003440e RDI: 0000000022400000 [ 48.420073] RBP: ffffb02101273c10 R08: 0000000000000010 R09: ffff8fed7ffd3680 [ 48.420121] R10: ffffeee1418ad7c0 R11: ffff8fed7ffd3000 R12: ffffffffc075e2c0 [ 48.420169] R13: ffffffffc074ec10 R14: ffff8fed73063900 R15: ffff8fed737428e8 [ 48.420216] FS: 00007fdc912ec540(0000) GS:ffff8fed7fc80000(0000) knlGS:0000000000000000 [ 48.420267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.420308] CR2: 000055fa40c30060 CR3: 000000023470a006 CR4: 00000000003606e0 [ 48.420358] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.420405] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.420452] Call Trace: [ 48.420485] ttm_bo_global_kobj_release+0x20/0x30 [amdttm] [ 48.420528] kobject_release+0x6a/0x180 [ 48.420562] kobject_put+0x28/0x50 [ 48.420595] ttm_bo_global_release+0x36/0x50 [amdttm] [ 48.420636] amdttm_bo_device_release+0x119/0x180 [amdttm] [ 48.420678] ? amdttm_bo_clean_mm+0xa6/0xf0 [amdttm] [ 48.420760] amdgpu_ttm_fini+0xc9/0x180 [amdgpu] [ 48.420821] amdgpu_bo_fini+0x12/0x40 [amdgpu] [ 48.420889] gmc_v9_0_sw_fini+0x40/0x50 [amdgpu] [ 48.420947] amdgpu_device_fini+0x36f/0x4c0 [amdgpu] [ 48.421007] amdgpu_driver_unload_kms+0xb4/0x150 [amdgpu] [ 48.421058] drm_dev_unregister+0x46/0xf0 [drm] [ 48.421102] drm_dev_unplug+0x12/0x70 [drm] Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/cirrus: Use drm_framebuffer_put to avoid kernel oops in clean-upThomas Zimmermann3-23/+29
[ Upstream commit abf7b30d7f61d981bfcca65d1e8331b27021b475 ] In the Cirrus driver, the regular clean-up code also performs the clean-up of a failed initialization. If the fbdev's framebuffer was not initialized, the clean-up will fail within drm_framebuffer_unregister_private. Booting with cirrus.bpp=16 triggers this bug. The framebuffer is currently stored directly within struct cirrus_fbdev. To fix the bug, we turn it into a pointer that is only set for initialized framebuffers. The fbdev's clean-up code skips uninitialized framebuffers. The memory for struct drm_framebuffer is allocated dynamically. This requires additional error handling within cirrusfb_create. The framebuffer clean-up is now performed by drm_framebuffer_put, which also frees the data strcuture's memory. Link: https://bugzilla.suse.com/show_bug.cgi?id=1101822 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20180720112743.27159-1-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failureYueHaibing1-1/+1
[ Upstream commit 909e9c9c428376e2a43d178ed4b0a2d5ba9cb7d3 ] pm_runtime_get_sync returns negative on failure. Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/exynos/mixer: fix MIXER shadow registry synchronisation codeAndrzej Hajda1-44/+66
[ Upstream commit 6a3b45ada960ac475ec2b4103d43e57943b2b8d3 ] MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20drm/udl: use drm_gem_object_put_unlocked.Dave Airlie1-1/+1
[ Upstream commit 8f3b487685b2acf71b42bb30d68fd9271bec8695 ] When Daniel removed struct_mutex he didn't fix this call to the unlocked variant which is required since we no longer use struct mutex. This fixes a bunch of: WARNING: CPU: 4 PID: 1370 at drivers/gpu/drm/drm_gem.c:931 drm_gem_object_put+0x2b/0x30 [drm] Modules linked in: udl xt_CHECKSUM ipt_MASQUERADE tun bridge stp llc nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t> CPU: 4 PID: 1370 Comm: Xorg Not tainted 5.0.0+ #2 backtraces when you plug in a udl device. Fixes: ae358dacd217 (drm/udl: Get rid of dev->struct_mutex usage) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17drm/udl: add a release method and delay modeset teardownDave Airlie3-1/+9
commit 9b39b013037fbfa8d4b999345d9e904d8a336fc2 upstream. If we unplug a udl device, the usb callback with deinit the mode_config struct, however userspace will still have an open file descriptor and a framebuffer on that device. When userspace closes the fd, we'll oops because it'll try and look stuff up in the object idr which we've destroyed. This punts destroying the mode objects until release time instead. Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-2-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17drm/i915/gvt: do not deliver a workload if its creation failsYan Zhao1-2/+3
commit dade58ed5af6365ac50ff4259c2a0bf31219e285 upstream. in workload creation routine, if any failure occurs, do not queue this workload for delivery. if this failure is fatal, enter into failsafe mode. Fixes: 6d76303553ba ("drm/i915/gvt: Move common vGPU workload creation into scheduler.c") Cc: stable@vger.kernel.org #4.19+ Cc: zhenyuw@linux.intel.com Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17drm/i915/gvt: do not let pin count of shadow mm go negativeYan Zhao1-1/+1
[ Upstream commit 663a50ceac75c2208d2ad95365bc8382fd42f44d ] shadow mm's pin count got increased in workload preparation phase, which is after workload scanning. it will get decreased in complete_current_workload() anyway after workload completion. Sometimes, if a workload meets a scanning error, its shadow mm pin count will not get increased but will get decreased in the end. This patch lets shadow mm's pin count not go below 0. Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization") Cc: zhenyuw@linux.intel.com Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfersVille Syrjälä1-0/+1
[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-16 14:10:28 +0300