summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-01-17drm/amdgpu: Don't fail resume process if resuming atomic state failsLyude Paul1-3/+2
commit 2d1af6a11cb9d88e0e3dd10258904c437fe1b315 upstream. This is an ugly one unfortunately. Currently, all DRM drivers supporting atomic modesetting will save the state that userspace had set before suspending, then attempt to restore that state on resume. This probably worked very well at one point, like many other things, until DP MST came into the picture. While it's easy to restore state on normal display connectors that were disconnected during suspend regardless of their state post-resume, this can't really be done with MST because of the fact that setting up a downstream sink requires performing sideband transactions between the source and the MST hub, sending out the ACT packets, etc. Because of this, there isn't really a guarantee that we can restore the atomic state we had before suspend once we've resumed. This sucks pretty bad, but so far I haven't run into any compositors that this actually causes serious issues with. Most compositors will notice the hotplug we send afterwards, and then reprobe state. Since nouveau and i915 also don't fail the suspend/resume process due to failing to restore the atomic state, let's make amdgpu match this behavior. Better to resume the GPU properly, then to stop the process half way because of a potentially unavoidable atomic commit failure. Eventually, we'll have a real fix for this problem on the DRM level. But we've got some more important low-hanging fruit to deal with first. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()Lyude Paul1-9/+23
commit fe7553bef8d676d1d8b40666868b33ec39b9df5d upstream. drm_dp_mst_topology_mgr_resume() returns whether or not it managed to find the topology in question after a suspend resume cycle, and the driver is supposed to check this value and disable MST accordingly if it's gone-in addition to sending a hotplug in order to notify userspace that something changed during suspend. Currently, amdgpu just makes the mistake of ignoring the return code from drm_dp_mst_topology_mgr_resume() which means that if a topology was removed in suspend, amdgpu never notices and assumes it's still connected which leads to all sorts of problems. So, fix this by actually checking the rc from drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the function while we're at it to fix the over-indenting. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17drm/i915: Unwind failure on pinning the gen7 ppgttChris Wilson1-3/+12
commit 280d479b310298dfeb1d6f9a1617eca37beb6ce4 upstream. If we fail to pin the ggtt vma slot for the ppgtt page tables, we need to unwind the locals before reporting the error. Or else on subsequent attempts to bind the page tables into the ggtt, we will already believe that the vma has been pinned and continue on blithely. If something else should happen to be at that location, choas ensues. Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk (cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2Ivan Mironov1-53/+73
commit 62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e upstream. SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu <mail@saahriktu.org> Suggested-by: saahriktu <mail@saahriktu.org> Cc: stable@vger.kernel.org Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17drm/fb_helper: Allow leaking fbdev smem_startNeil Armstrong2-0/+45
commit 4be9bd10e22dfc7fc101c5cf5969ef2d3a042d8a upstream. Since "drm/fb: Stop leaking physical address", the default behaviour of the DRM fbdev emulation is to set the smem_base to 0 and pass the new FBINFO_HIDE_SMEM_START flag. The main reason is to avoid leaking physical addresse to user-space, and it follows a general move over the kernel code to avoid user-space to manipulate physical addresses and then use some other mechanisms like dma-buf to transfer physical buffer handles over multiple subsystems. But, a lot of devices depends on closed sources binaries to enable OpenGL hardware acceleration that uses this smem_start value to pass physical addresses to out-of-tree modules in order to render into these physical adresses. These should use dma-buf buffers allocated from the DRM display device instead and stop relying on fbdev overallocation to gather DMA memory (some HW vendors delivers GBM and Wayland capable binaries, but older unsupported devices won't have these new binaries and are doomed until an Open Source solution like Lima finalizes). Since these devices heavily depends on this kind of software and because the smem_start population was available for years, it's a breakage to stop leaking smem_start without any alternative solutions. This patch adds a Kconfig depending on the EXPERT config and an unsafe kernel module parameter tainting the kernel when enabled. A clear comment and Kconfig help text was added to clarify why and when this patch should be reverted, but in the meantime it's a necessary feature to keep. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17drm/amd/display: Fix MST dp_blank REG_WAIT timeoutJerry (Fangzhi) Zuo1-2/+2
commit 8c9d90eebd23b6d40ddf4ce5df5ca2b932336a06 upstream. Need to blank stream before deallocate MST payload. [drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu] Call Trace: dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu] core_link_disable_stream+0x40/0x230 [amdgpu] ? generic_reg_update_ex+0xdb/0x130 [amdgpu] dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu] dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu] ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu] dc_commit_state+0x2ba/0x4d0 [amdgpu] amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu] ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu] ? wait_for_completion_timeout+0x1f/0x120 ? wait_for_completion_interruptible+0x1c/0x160 commit_tail+0x3d/0x60 [drm_kms_helper] drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper] drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm] drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm] drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm] drm_ioctl+0x1e0/0x430 [drm] ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm] ? ep_read_events_proc+0xb0/0xb0 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0 ? timerqueue_add+0x52/0x80 amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ---[ end trace 3ed7b77a97d60f72 ]--- Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17drm/amdgpu: Add new VegaM pci idAlex Deucher1-0/+1
commit f6653a0e0877572c87f6dab5351e7bd6b6b7100c upstream. Add a new pci id. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13drm/amd/display: Fix unintialized max_bpc state valuesNicholas Kazlauskas1-0/+2
commit 49f1c44b581b08e3289127ffe58bd208c3166701 upstream. [Why] If the "max bpc" isn't explicitly set in the atomic state then it have a value of 0. This has the correct behavior of limiting a panel to 8bpc in the case where the panel supports 8bpc. In the case of eDP panels this isn't a true assumption - there are panels that can only do 6bpc. Banding occurs for these displays. [How] Initialize the max_bpc when the connector resets to 8bpc. Also carry over the value when the state is duplicated. Bugzilla: https://bugs.freedesktop.org/108825 Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13drm/rockchip: psr: do not dereference encoder before it is null checked.Enric Balletbo i Serra1-1/+3
commit 4eda776c3cefcb1f01b2d85bd8753f67606282b5 upstream. 'encoder' is dereferenced before it is null sanity checked, hence we potentially have a null pointer dereference bug. Instead, initialise drm_drv from encoder->dev->dev_private after we are sure 'encoder' is not null. Fixes: 5182c1a556d7f ("drm/rockchip: add an common abstracted PSR driver") Cc: stable@vger.kernel.org Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13drm/vc4: Set ->is_yuv to false when num_planes == 1Boris Brezillon1-0/+1
commit 2b02a05bdc3a62d36e0d0b015351897109e25991 upstream. When vc4_plane_state is duplicated ->is_yuv is left assigned to its previous value, and we never set it back to false when switching to a non-YUV format. Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch of the vc4_plane_setup_clipping_and_scaling() function. Fixes: fc04023fafecf ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13drm/nouveau/drm/nouveau: Check rc from drm_dp_mst_topology_mgr_resume()Lyude Paul1-2/+10
commit b89fdf7ae8500feae1100d8b283176a44d31d698 upstream. We need to actually make sure we check this on resume since otherwise we won't know whether or not the topology is still there once we've resumed, which will cause us to still think the topology is connected even after it's been removed if the removal happens mid-suspend. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lockAndrey Grodzovsky1-2/+2
[ Upstream commit c554206077428af56cc2e0314b86b41cd030458c ] If CS is submitted using guilty ctx, we terminate amdgpu_cs_parser_init before locking ctx->lock, latter in amdgpu_cs_parser_fini we still are trying to release the lock just becase parser->ctx != NULL. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09DRM: UDL: get rid of useless vblank initializationEugeniy Paltsev1-6/+1
commit 32e932e37e6b6e13b66add307192c7ddd40a781d upstream. UDL doesn't support vblank functionality so we don't need to initialize vblank here (we are able to send page flip completion events even without vblank initialization) Moreover current drm_vblank_init call with num_crtcs > 0 causes sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every time. This breaks userspace apps (for example weston) which relies on timestamp value. Cc: stable@vger.kernel.org Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09drm/v3d: Skip debugfs dumping GCA on platforms without GCA.Eric Anholt1-4/+7
commit 2f20fa8d12e859a03f68bdd81d75830141bc9ac9 upstream. Fixes an oops reading this debugfs entry on BCM7278. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-4-eric@anholt.net Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Cc: <stable@vger.kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29drm/ioctl: Fix Spectre v1 vulnerabilitiesGustavo A. R. Silva1-2/+8
commit 505b5240329b922f21f91d5b5d1e535c805eca6d upstream. nr is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r] drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap) drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap) Fix this by sanitizing nr before using it to index dev->driver->ioctls and drm_ioctls. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21drm/ast: Fix connector leak during driver unloadSam Bobroff1-0/+1
[ Upstream commit e594a5e349ddbfdaca1951bb3f8d72f3f1660d73 ] When unloading the ast driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs. Correct this by calling drm_crtc_force_disable_all() in ast_fbdev_destroy(). Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/amdgpu/vcn: Update vcn.cur_state during suspendJames Zhu1-1/+2
[ Upstream commit 0a9b89b2e2e7b6d90f81ddc47e489be1043e01b1 ] Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend, to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/amd/powerplay: issue pre-display settings for display change eventEvan Quan2-2/+3
[ Upstream commit 10cb3e6b63bf4266a5198813526fdd7259ffb8be ] For display config change event only, pre-display config settings are needed. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: Fix error return checkingWen Yang1-1/+1
[ Upstream commit 098336deb946f37a70afc0979af388b615c378bf ] The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: dpu: Fix "WARNING: invalid free of devm_ allocated data"YueHaibing1-2/+0
[ Upstream commit ce25aa3ee6939d83979cccf7adc5737cba9a0cb7 ] 'dpu_enc' is a member of 'drm_enc' And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init. This gives this error message: ./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6: WARNING: invalid free of devm_ allocated data Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: dpu: Don't set legacy plane->crtc pointerSean Paul1-1/+0
[ Upstream commit 081679c51ef2fd7b23cf9ddb7d775b17f75de18c ] It causes a WARN in drm_atomic_get_plane_state(), and is not used by atomic (or dpu). Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm/hdmi: Enable HPD after HDMI IRQ is set upTodor Tomov3-8/+9
[ Upstream commit ee4456359640defe3f51cc6b728bfce4bc444c9e ] SoCs that contain MDP5 have a top level wrapper called MDSS that manages locks, power and irq for the sub-blocks within it. Irq for HDMI is also routed through the MDSS. Shortly after the Hot Plug Detection (HPD) is enabled in HDMI, HDMI interrupts are recieved by the MDSS interrupt handler. However at this moment the HDMI irq is still not mapped to the MDSS irq domain so the HDMI irq handler cannot be called to process the interrupts. This leads to a flood of HDMI interrupts on CPU 0. If we are lucky to have the HDMI initialization running on a different CPU, it will eventually map the HDMI irq to MDSS irq domain, the next HDMI interrupt will be handled by the HDMI irq handler, the interrupt flood will stop and we will recover. If the HDMI initialization is running on CPU 0, then it cannot complete and there is nothing to stop the interrupt flood on CPU 0. The system is stuck. Fix this by moving the HPD enablement after the HDMI irq is mapped to the MDSS irq domain. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/amdgpu: wait for IB test on first device openChristian König1-3/+3
[ Upstream commit 3bfa8897e4d08f822d1d58cf6cbbffbccef82e08 ] Instead of delaying that to the first query. Otherwise we could try to use the SDMA for VM updates before the IB tests are done. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/ttm: fix LRU handling in ttm_buffer_object_transferChristian König1-1/+3
[ Upstream commit d6e820fcd4cf08b11d291a1dd7bbd0636914647c ] We need to set the NO_EVICT flag on the ghost object or otherwise we are adding it to the LRU. When it is added to the LRU we can run into a race between destroying and evicting it again. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: Grab a vblank reference when waiting for commit_doneSean Paul1-0/+5
[ Upstream commit 3b712e43e3876b42b38321ecf790a1f5fe59c834 ] Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm/dsi: configure VCO rate for 10nm PLL driverAbhinav Kumar1-1/+3
[ Upstream commit 8531f0587f5c9e1a74cd9543a97617349f5e0706 ] Currenty the VCO rate in the 10nm PLL driver relies on the parent rate which is not configured. Configure the VCO rate to 19.2 Mhz as required by the 10nm PLL driver. Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: fix handling of cmdstream offsetRob Clark1-1/+4
[ Upstream commit 47e7f506ee6590ceb2efa1f08aca7f9f2ee5c1d3 ] Userspace hasn't used submit cmds with submit_offset != 0 for a while, but this starts cropping up again with cmdstream sub-buffer-allocation in libdrm_freedreno. Doesn't do much good to increment the buf ptr before assigning it. Fixes: 78b8e5b847b4 drm/msm: dump a rd GPUADDR header for all buffers in the command Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm/gpu: Fix a couple memory leaks in debugfsDan Carpenter1-4/+11
[ Upstream commit 51270de91412b819f654b849db3bf92dac0a0855 ] The msm_gpu_open() function should free "show_priv" on error or it causes static checker warnings. Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: Fix task dump in gpu recoverySharat Masetty1-5/+4
[ Upstream commit 482f96324a4e08818db7d75bb12beaaea6c9561d ] The current recovery code gets a pointer to the task struct and does a few things all within the rcu_read_lock. This puts constraints on the types of gfp flags that can be used within the rcu lock. This patch instead gets a reference to the task within the rcu lock and releases the lock immediately, this way the task stays afloat until we need it and we also get to use the desired gfp flags. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/amd/display: Fix 6x4K displays light-up on Vega20 (v2)Roman Li1-0/+2
[ Upstream commit c6888879fd55b1ba903c2a770127edbf6aef6f27 ] [Why] More than 4x4K didn't lightup on Vega20 due to low dcfclk value. Powerplay expects valid min requirement for dcfclk from DC. [How] Update min_dcfclock_khz based on min_engine_clock value. v2: backport to 4.20 (Alex) Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-19drm/amdgpu: update SMC firmware image for polaris10 variantsJunwei Zhang1-1/+2
commit d55d8be0747c96db28a1d08fc24d22ccd9b448ac upstream. Some new variants require different firmwares. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/amdgpu: update smu firmware images for VI variants (v2)Alex Deucher2-5/+31
commit 153573d8870e1c173721bdc1ced72b3ad0d85de4 upstream. Some new variants require updated firmware. V2: add MODULE_FIRMWARE for new firmwares Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/amdgpu: add some additional vega10 pci idsAlex Deucher1-0/+6
commit 2244b5887c6865b9e9cf14ee12a312b776aeeb58 upstream. New vega ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/amdkfd: add new vega10 pci idsAlex Deucher1-0/+6
commit 756e16bf79f2815e7c83a04881b5545b55a99fd3 upstream. New vega10 ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/amdgpu/powerplay: Apply avfs cks-off voltages on VIKenneth Feng2-0/+8
commit cf4197ed5796234a53beb71228198c7d1e678947 upstream. Instead of EVV cks-off voltages, avfs cks-off voltages can avoid the overshoot voltages when switching sclk. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/i915/execlists: Apply a full mb before execution for BraswellChris Wilson1-1/+6
commit cf66b8a0ba142fbd1bf10ac8f3ae92d1b0cb7b8f upstream. Braswell is really picky about having our writes posted to memory before we execute or else the GPU may see stale values. A wmb() is insufficient as it only ensures the writes are visible to other cores, we need a full mb() to ensure the writes are in memory and visible to the GPU. The most frequent failure in flushing before execution is that we see stale PTE values and execute the wrong pages. References: 987abd5c62f9 ("drm/i915/execlists: Force write serialisation into context image vs execution") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk (cherry picked from commit 490b8c65b9db45896769e1095e78725775f47b3e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/i915/gvt: Fix tiled memory decoding bug on BDWTina Zhang1-1/+1
commit a40fa231bb64b33e2cd54cf8ef44a9f89875fa11 upstream. Commit b244ffa15c8b ("drm/i915/gvt: Fix drm_format_mod value for vGPU plane") introduced a regression issue to the tiled memory decoding on BDW. This patch can fix this issue. Here is the issue detail: https://github.com/intel/gvt-linux/issues/61 v1->v2: - Refine the commit message. (Zhenyu) Fixes: b244ffa15c8b("drm/i915/gvt: Fix drm_format_mod value for vGPU plane") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"Brian Norris1-6/+0
commit 63238173b2faf3d6b85a416f1c69af6c7be2413f upstream. This reverts commit 7f3ef5dedb146e3d5063b6845781ad1bb59b92b5. It causes new warnings [1] on shutdown when running the Google Kevin or Scarlet (RK3399) boards under Chrome OS. Presumably our usage of DRM is different than what Marc and Heiko test. We're looking at a different approach (e.g., [2]) to replace this, but IMO the revert should be taken first, as it already propagated to -stable. [1] Report here: http://lkml.kernel.org/lkml/20181205030127.GA200921@google.com WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x1c4/0x294 ... Call trace: drm_mode_config_cleanup+0x1c4/0x294 rockchip_drm_unbind+0x4c/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... Memory manager not clean during takedown. WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mm.c:950 drm_mm_takedown+0x34/0x44 ... drm_mm_takedown+0x34/0x44 rockchip_drm_unbind+0x64/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... [2] https://patchwork.kernel.org/patch/10556151/ https://www.spinics.net/lists/linux-rockchip/msg21342.html [PATCH] drm/rockchip: shutdown drm subsystem on shutdown Fixes: 7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Vicente Bergas <vicencb@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181205181657.177703-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/nouveau/kms/nv50-: also flush fb writes when rewinding push bufferBen Skeggs1-11/+18
commit 970a5ee41c72df46e3b0f307528c7d8ef7734a2e upstream. Should hopefully fix a regression some people have been seeing since EVO push buffers were moved to VRAM by default on Pascal GPUs. Fixes: d00ddd9da ("drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/nouveau/kms: Fix memory leak in nv50_mstm_del()Lyude Paul1-0/+1
commit 24199c5436f267399afed0c4f1f57663c0408f57 upstream. Noticed this while working on redoing the reference counting scheme in the DP MST helpers. Nouveau doesn't attempt to call drm_dp_mst_topology_mgr_destroy() at all, which leaves it leaking all of the resources for drm_dp_mst_topology_mgr and it's children mstbs+ports. Fixes: f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream") Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19drm/msm: fix address space warningArnd Bergmann1-4/+4
In the linux-4.19 stable kernel, we get a warning about a type mismatch between phys_addr_t and dma_addr_t: drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c: In function '_dpu_dbg_dump_dpu_dbg_bus': drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:2003:16: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] list_size, &phys, GFP_KERNEL); ^~~~~ In file included from include/linux/dma-buf.h:31, from drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:20: include/linux/dma-mapping.h:561:15: note: expected 'dma_addr_t *' {aka 'long long unsigned int *'} but argument is of type 'phys_addr_t *' {aka 'unsigned int *'} dma_addr_t *dma_handle, gfp_t flag) ~~~~~~~~~~~~^~~~~~~~~~ drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c: In function '_dpu_dbg_dump_vbif_dbg_bus': drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:2154:16: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] list_size, &phys, GFP_KERNEL); ^~~~~ In file included from include/linux/dma-buf.h:31, from drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:20: include/linux/dma-mapping.h:561:15: note: expected 'dma_addr_t *' {aka 'long long unsigned int *'} but argument is of type 'phys_addr_t *' {aka 'unsigned int *'} This code was removed in linux-4.20 with upstream commit effec874792f ("drm/msm/dpu: Remove dpu_dbg"). Rather than backporting the large patch, this just fixes the warning by using the correct type. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17drm/ast: fixed reading monitor EDID not stable issueY.C. Chen1-6/+30
[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ] v1: over-sample data to increase the stability with some specific monitors v2: refine to avoid infinite loop v3: remove un-necessary "volatile" declaration [airlied: fix two checkpatch warnings] Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17drm/amdgpu: Add delay after enable RLC ucodeshaoyunl1-3/+4
[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ] Driver shouldn't try to access any GFX registers until RLC is idle. During the test, it took 12 seconds for RLC to clear the BUSY bit in RLC_GPM_STAT register which is un-acceptable for driver. As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK cycles to finish its critical section. In a lowest 300M enginer clock setting(default from vbios), 50 us delay is enough. This commit fix the hang when RLC introduce the work around for XGMI which requires more cycles to setup more registers than normal Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17drm/meson: add support for 1080p25 modeChristian Hewitt1-0/+1
[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ] This essential mode for PAL users is missing, so add it. Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13drm/i915: Downgrade Gen9 Plane WM latency errorChris Wilson1-2/+2
commit 86c1c87d0e6241cbe35bd52badfc84b154e1b959 upstream. According to intel_read_wm_latency() it is perfectly legal for one WM and all subsequent levels to be 0 (and the deeper powersaving states disabled), so don't shout *ERROR*, over and over again. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180726161527.10516-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13drm/amdgpu/gmc8: always load MC firmware in the driverAlex Deucher1-8/+1
commit b52b6738cc2d50d2a8f4d0095bcb5a86716008a5 upstream. Some power features rely on the driver loaded version so always load the MC firmware from the driver even if the vbios loaded a version already. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13drm/amdgpu/gmc8: update MC firmware for polarisAlex Deucher1-5/+24
commit a81a7c9c9ea3042ab02d66ac35def74abf091c15 upstream. Some variants require different MC firmware images. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13drm/msm: Move fence put to where failure occursRobert Foss1-7/+8
commit 2189463dba3eac10d7264a40ede12fc1a3c06fb1 upstream. If dma_fence_wait fails to wait for a supplied in-fence in msm_ioctl_gem_submit, make sure we release that in-fence. Also remove this dma_fence_put() from the 'out' label. Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13drm/lease: Send a distinct ueventDaniel Vetter3-1/+13
commit ce85882860f0e756f7066cbda1c43e8b50b73ab6 upstream. Sending the exact same hotplug event is not great uapi. Luckily the only already merged implementation of leases (in the -modesetting driver) doesn't care about what kind of uevent it gets, and unconditionally processes both hotplug and lease changes. So we can still adjust the uapi here. But e.g. weston tries to filter stuff, and I guess others might want to do that too. Try to make that possible. Cc: stable since it's uapi adjustement that we want to roll out everywhere. Michel Dänzer mentioned on irc that -amdgpu also has lease support. It has the same code flow as -modesetting though, so we can still go ahead. v2: Mention -amdgpu (Michel) Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129094226.30591-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13drm/amdgpu: update mc firmware image for polaris12 variantsJunwei Zhang1-0/+10
commit d7fd67653f847327e545bdb198b901ee124afd7c upstream. Some new variants require updated firmware. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-10 12:21:33 +0300