summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-05-30drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successfulDeepak Rawat1-0/+2
commit 91ba9f28a3de97761c2b5fd5df5d88421268e507 upstream. SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO (and not call a new vmw_dmabuf_init) when a new fb size is same as current fb. This was changed in a recent commit which is causing page_flip to fail on VM with low display memory and multi-mon failure when cycle monitors from secondary display. Cc: <stable@vger.kernel.org> # 4.14, 4.16 Fixes: 20fb5a635a0c ("drm/vmwgfx: Unpin the screen object backup buffer when not used") Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2Sergei Shtylyov1-5/+6
[ Upstream commit 8525d04ba8a6a9ecfa4bd619c988ca873a5fc2a4 ] According to the latest revision 2.00 of the R-Car Gen2 manual, the LVDS and the bias circuit must be enabled after the LVDS I/O pins are enabled, not before. Fix the Gen2 LVDS startup sequence accordingly. While at it, also fix the comment preceding the first LVDCR0 write that still talks about hardcoding the LVDS mode 0. Fixes: 90374b5c25c9 ("drm/rcar-du: Add internal LVDS encoder support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen3Sergei Shtylyov1-2/+5
[ Upstream commit 796ceb9269626afaed3b4955c40d2c3d7a8c5d01 ] According to the latest revisions of the R-Car Gen3 manual, the LVDS mode must be set before the LVDS I/O pins are enabled, not after -- fix the Gen3 LVDS startup sequence accordingly. Fixes: e947eccbeba4 ("drm: rcar-du: Add support for LVDS mode selection") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Updated comment in rcar_du_lvdsenc_start_gen3()] [Moved Gen2 startup comment update to separate commit] [Fixed =| typo] Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/rockchip: Respect page offset for PRIME mmap callsØrjan Eide1-1/+6
[ Upstream commit 57de50af162b67612da99207b061ade3239e57db ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/amdgpu: adjust timeout for ib_ring_tests(v2)Monk Liu1-1/+32
[ Upstream commit dbf797655a43c6318ebb90b899e6583fcadc6472 ] issue: sometime GFX/MM ib test hit timeout under SRIOV env, root cause is that engine doesn't come back soon enough so the current IB test considered as timed out. fix: for SRIOV GFX IB test wait time need to be expanded a lot during SRIOV runtimei mode since it couldn't really begin before GFX engine come back. for SRIOV MM IB test it always need more time since MM scheduling is not go together with GFX engine, it is controled by h/w MM scheduler so no matter runtime or exclusive mode MM IB test always need more time. v2: use ring type instead of idx to judge Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/amdgpu: disable GFX ring and disable PQ wptr in hw_finiMonk Liu1-1/+7
[ Upstream commit 9f0178fb67699992d38601cb923b434f9986dd68 ] otherwise there will be DMAR reading error comes out from CP since GFX is still alive and CPC's WPTR_POLL is still enabled, which would lead to DMAR read error. fix: we can hault CPG after hw_fini, but cannot halt CPC becaues KIQ stil need to be alive to let RLCV invoke, but its WPTR_POLL could be disabled. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm: omapdrm: dss: Move initialization code from component bind to probeLaurent Pinchart1-89/+104
[ Upstream commit 215003b4ae1d47035092fef73b6a22aa82037091 ] There's no reason to delay initialization of most of the driver (such as mapping memory I/O, getting clocks or enabling runtime PM) to the component master bind handler. This additionally fixes a real PM issue caused enabling runtime PM in the bind handler. The bind handler performs the following sequence of PM operations: pm_runtime_enable(dev); pm_runtime_get_sync(dev); ... (access the hardware to read the device revision) ... pm_runtime_put_sync(dev); If a failure occurs at this point, the error path calls pm_runtime_disable() to balance the pm_runtime_enable() call. To understand the problem, it should be noted that the bind handler is called when one of the component registers itself, which happens in the component's probe handler. Furthermore, as the components are children of the DSS, the device core calls pm_runtime_get_sync() on the DSS platform device before calling the component's probe handler. This increases the DSS power usage count but doesn't runtime resume the device, as runtime PM is disabled at that point. The bind handler is thus called with runtime PM disabled, with the device runtime suspended, but with the power usage count larger than 0. The pm_runtime_get_sync() call will thus further increase the power usage count and runtime resume the device. The pm_runtime_put_sync() handler will decrease the power usage count to a non-zero value and will thus not suspend the device. Finally, the pm_runtime_disable() call will disable runtime PM, preventing the pm_runtime_put() call in the device core from runtime suspending the device. The DSS device is thus left powered on. To fix this, move the initialization code from the bind handler to the probe handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/bridge: sii902x: Retry status read after DDI I2CLinus Walleij1-4/+16
[ Upstream commit 2e7a66a8b5ebf1b04a866e5d7c981640f7f62934 ] The following happens when connection a DVI output driven from the SiI9022 using a DVI-to-VGA adapter plug: i2c i2c-0: sendbytes: NAK bailout. i2c i2c-0: sendbytes: NAK bailout. Then no picture. Apparently the I2C engine inside the SiI9022 is not smart enough to try to fall back to DDC I2C. Or the vendor have not integrated the electronics properly. I don't know which one it is. After this, the I2C bus seems stalled and the first attempt to read the status register fails, and the code returns with negative return value, and the display fails to initialized. Instead, retry status readout five times and continue even if this fails. Tested on the ARM Versatile Express with a DVI-to-VGA connector, it now gives picture. Introduce a helper struct device *dev variable to make the code more readable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180305101702.13441-1-linus.walleij@linaro.org Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/panel: simple: Fix the bus format for the Ontat panelEric Anholt1-1/+1
[ Upstream commit 5651e5e094591f479adad5830ac1bc45196a39b3 ] This fixes bad color output. When I was first testing the device I had the DPI hardware set to 666 mode, but apparently in the refactor to use the bus_format information from the panel driver, I failed to actually update the panel. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit") Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'Christophe JAILLET1-1/+4
[ Upstream commit e770f6bf18182bc3af6ceec30189b6c323cbc157 ] 'drm_vblank_init()' can fail. So handle this (unlikely) error. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/6cbf3d70ac3904489c7194c895225c4103aebb96.1520885192.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/meson: Fix some error handling paths in 'meson_drv_bind_master()'Christophe JAILLET1-8/+16
[ Upstream commit 2c18107b9d58972588cd45d89b8f58d0f033c110 ] If one of these functions fail, we whould free 'drm', as alreadry done in the other error handling paths, below and above. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/df47e03d36c2cf7bc37ec3105fc47c16555bd946.1520885192.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/amdkfd: add missing include of mm.hOded Gabbay1-0/+1
[ Upstream commit 7420f482ea5163bf6dae39a5c7628d5397cd6307 ] This patch fixes kernel build in ARCH=frv Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/vmwgfx: Unpin the screen object backup buffer when not usedThomas Hellstrom1-8/+21
[ Upstream commit 20fb5a635a0c8478ac98f15cfafc2ea83df29565 ] We were relying on the pinned screen object backup buffer to be destroyed when not used. But if we hold a copy of the atomic state, like when hibernating, the backup buffer might not be destroyed since it's refcounted by the atomic state. This causes us to hibernate with a buffer pinned in VRAM. Fix this by only having the buffer pinned when it is actually used by a screen object. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/amdkfd: Fix scratch memory with HWS enabledFelix Kuehling1-2/+1
[ Upstream commit c70a36268799cf2f902b5a31e452571fcb96bfe9 ] Program sh_hidden_private_base_vmid correctly in the map-process PM4 packet. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/ast: Fixed 1280x800 Display IssueY.C. Chen1-2/+2
[ Upstream commit 5a9f698feb11b198f17b2acebbfe0e2716a3beed ] The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/tegra: Shutdown on driver unbindThierry Reding1-0/+1
[ Upstream commit 192b4af6cd28cdad9b42fd79c21a90a2aeb0bec7 ] Since commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), removing the last framebuffer will no longer disable the corresponding pipeline, which causes the KMS core to complain about leaked connectors on driver unbind. Fix this by calling drm_atomic_helper_shutdown() on driver unbind, which will cause all display pipelines to be shut down and therefore drop the extra references on the connectors. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/nouveau/bl: fix backlight regressionKarol Herbst1-5/+5
[ Upstream commit 9e75dc61eaa9acd1bff83c3b814ac2af6dc1f64c ] Fixes: 3c66c87dc9 ("drm/nouveau/disp: remove hw-specific customisation of output paths") Suggested-by: Ben Skeggs <skeggsb@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/imx: move arming of the vblank event to atomic_flushLucas Stach1-0/+5
[ Upstream commit 6a055b92de15af987b4027826d43aa103c65a3c4 ] Right now the vblank event completion is racing with the atomic update, which is especially bad when the PRE is in use, as one of the hardware issue workaround might extend the atomic commit for quite some time. If the vblank IRQ happens to trigger during that time, we will prematurely signal the atomic commit completion to userspace, which causes tearing when userspace re-uses a framebuffer we haven't managed to flip away from yet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30gpu: ipu-v3: prg: avoid possible array underflowArnd Bergmann1-3/+9
[ Upstream commit 746d024c3211813946b319411aeb2b47767f8fb0 ] gcc-8 reports that we access an array with a negative index in an error case: drivers/gpu/ipu-v3/ipu-prg.c: In function 'ipu_prg_channel_disable': drivers/gpu/ipu-v3/ipu-prg.c:252:43: error: array subscript -22 is below array bounds of 'struct ipu_prg_channel[3]' [-Werror=array-bounds] This moves the range check in front of the first time that variable gets used. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/sun4i: Fix dclk_set_phaseGiulio Benetti1-1/+4
[ Upstream commit e64b6afa98f3629d0c0c46233bbdbe8acdb56f06 ] Phase value is not shifted before writing. Shift left of 28 bits to fit right bits Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1519836413-35023-1-git-send-email-giulio.benetti@micronovasrl.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/amd/amdgpu: Correct VRAM width for APUs with GMC9Tom St Denis1-1/+4
[ Upstream commit 585b7f161c85bd5ca675b97580faf21c506541e3 ] DDR4 has a 64-bit width not 128-bits. It was reporting twice the width. Tested with my Ryzen 2400G. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30virtio-gpu: fix ioctl and expose the fixed status to userspace.Dave Airlie1-6/+11
[ Upstream commit 9a191b114906457c4b2494c474f58ae4142d4e67 ] This exposes to mesa that it can use the fixed ioctl for querying later cap sets, cap set 1 is forever frozen in time. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180221015003.22884-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/meson: fix vsync buffer updateNeil Armstrong3-4/+12
[ Upstream commit e88230a3744a71a0b5ecfb45e08ddfe1c884e50d ] The plane buffer address/stride/height was incorrectly updated in the plane_atomic_update operation instead of the vsync irq. This patch delays this operation in the vsync irq along with the other plane delayed setup. This issue was masked using legacy framebuffer and X11 modesetting, but is clearly visible using gbm rendering when buffer is submitted late after vblank, like using software decoding and OpenGL rendering in Kodi. With this patch, tearing and other artifacts disappears completely. Cc: Michal Lazo <michal.lazo@gmail.com> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1518689976-23292-1-git-send-email-narmstrong@baylibre.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/exynos: fix comparison to bitshift when dealing with a maskWolfram Sang1-1/+1
[ Upstream commit 1293b6191010672c0c9dacae8f71c6f3e4d70cbe ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/exynos: g2d: use monotonic timestampsArnd Bergmann1-3/+3
[ Upstream commit a588a8bb7b25a3fb4f7fed00feb7aec541fc2632 ] The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandleTobias Jordan1-0/+3
[ Upstream commit 3addaba8141bc6a4f649a48f46e552af32922147 ] Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: ea9c260514c1 ("gpu: ipu-v3: add driver for Prefetch Resolve Gasket") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandleTobias Jordan1-0/+3
[ Upstream commit c795f3052b60b01e80485fad98c53e5e67d093c9 ] Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macrosThomas Hellstrom1-8/+17
commit 938ae7259c908ad031da35d551da297640bb640c upstream. Depending on whether the kernel is compiled with frame-pointer or not, the temporary memory location used for the bp parameter in these macros is referenced relative to the stack pointer or the frame pointer. Hence we can never reference that parameter when we've modified either the stack pointer or the frame pointer, because then the compiler would generate an incorrect stack reference. Fix this by pushing the temporary memory parameter on a known location on the stack before modifying the stack- and frame pointers. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glkMichel Thierry2-0/+7
commit b579f924a90f42fa561afd8201514fc216b71949 upstream. Factor in clear values wherever required while updating destination min/max. References: HSDES#1604444184 Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: mesa-dev@lists.freedesktop.org Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com Cc: stable@vger.kernel.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514165445.9198-1-michel.thierry@intel.com (backported from commit 0c79f9cb77eae28d48a4f9fc1b3341aacbbd260c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22drm: Match sysfs name in link removal to link creationHaneen Mohammed1-1/+1
commit 7f6df440b8623c441c42d070bf592e2d2c1fa9bb upstream. This patch matches the sysfs name used in the unlinking with the linking function. Otherwise, remove_compat_control_link() fails to remove sysfs created by create_compat_control_link() in drm_dev_register(). Fixes: 6449b088dd51 ("drm: Add fake controlD* symlinks for backwards compat") Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> [seanpaul added Fixes and Cc tags] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180511041542.GA4253@haneen-vb Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/atomic: Clean private obj old_state/new_state in ↵Ville Syrjälä1-0/+2
drm_atomic_state_default_clear() commit b5cb2e5a1f64d882a155add7522247ab0523051e upstream. Clear the old_state and new_state pointers for private objects in drm_atomic_state_default_clear(). We don't actually have functions to get the new/old state for private objects so getting access to the potentially stale pointers requires a bit more manual labour than for other object types. But let's clear the pointers for private objects as well, if only to avoid future surprises when someone decides to add the functions to get at them. v2: Split private objs to a separate patch (Daniel) Cc: <stable@vger.kernel.org> # v4.14+ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: a4370c777406 (drm/atomic: Make private objs proper objects) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()Ville Syrjälä1-0/+6
commit f0b408eebc993310bea3f2daae286c40bd3f063b upstream. Clear the old_state and new_state pointers for every object in drm_atomic_state_default_clear(). Otherwise drm_atomic_get_{new,old}_*_state() will hand out stale pointers to anyone who hasn't first confirmed that the object is in fact part of the current atomic transcation, if they are called after we've done the ww backoff dance while hanging on to the same drm_atomic_state. For example, handle_conflicting_encoders() looks like it could hit this since it iterates the full connector list and just calls drm_atomic_get_new_connector_state() for each. And I believe we have now witnessed this happening at least once in i915 check_digital_port_conflicts(). Commit 8b69449d2663 ("drm/i915: Remove last references to drm_atomic_get_existing* macros") changed the safe drm_atomic_get_existing_connector_state() to the unsafe drm_atomic_get_new_connector_state(), which opened the doors for this particular bug there as well. v2: Split private objs out to a separate patch (Daniel) Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: 581e49fe6b41 ("drm/atomic: Add new iterators over all state, v3.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/nouveau: Fix deadlock in nv50_mstm_register_connector()Lyude Paul1-4/+3
commit 352672db857290ab5b0e2b6a99c414f92bee024c upstream. Currently; we're grabbing all of the modesetting locks before adding MST connectors to fbdev. This isn't actually necessary, and causes a deadlock as well: ====================================================== WARNING: possible circular locking dependency detected 4.17.0-rc3Lyude-Test+ #1 Tainted: G O ------------------------------------------------------ kworker/1:0/18 is trying to acquire lock: 00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] but task is already holding lock: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (crtc_ww_class_mutex){+.+.}: ww_mutex_lock+0x43/0x80 drm_modeset_lock+0x71/0x130 [drm] drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (crtc_ww_class_acquire){+.+.}: drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dev->mode_config.mutex){+.+.}: drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&helper->lock){+.+.}: __mutex_lock+0x70/0x9d0 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(crtc_ww_class_mutex); lock(crtc_ww_class_acquire); lock(crtc_ww_class_mutex); lock(&helper->lock); *** DEADLOCK *** 5 locks held by kworker/1:0/18: #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm] #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm] #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] stack backtrace: CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G O 4.17.0-rc3Lyude-Test+ #1 Hardware name: Gateway FX6840/FX6840, BIOS P01-A3 05/17/2010 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.38+0x1ce/0x1db __lock_acquire+0x128f/0x1350 ? lock_acquire+0x9f/0x200 ? lock_acquire+0x9f/0x200 ? __ww_mutex_lock.constprop.13+0x8f/0x1000 lock_acquire+0x9f/0x200 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] __mutex_lock+0x70/0x9d0 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? ww_mutex_lock+0x43/0x80 ? _cond_resched+0x15/0x30 ? ww_mutex_lock+0x43/0x80 ? drm_modeset_lock+0xb2/0x130 [drm] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] ? mark_held_locks+0x50/0x80 ? kfree+0xcf/0x2a0 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] ? trace_hardirqs_on_caller+0xed/0x180 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau] ? find_held_lock+0x2d/0x90 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] ? __mutex_unlock_slowpath+0x3b/0x280 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 ? process_one_work+0x650/0x650 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x50/0x50 ret_from_fork+0x3a/0x50 Taking example from i915, the only time we need to hold any modesetting locks is when changing the port on the mstc, and in that case we only need to hold the connection mutex. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel logFlorent Flament1-1/+2
commit e8f48f96db7e482995743f461b3e8a5c1a102533 upstream. Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by: Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 280b54ade5914d3b4abe4f0ebe083ddbd4603246) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/vc4: Fix scaling of uni-planar formatsBoris Brezillon1-1/+1
commit 9a0e9802217291e54c4dd1fc5462f189a4be14ec upstream. When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09drm/bridge: vga-dac: Fix edid memory leakSean Paul1-1/+3
commit 49ceda9de2da4d1827941d06701f3017c27c1855 upstream. edid should be freed once it's finished being used. Fixes: 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support") Cc: Rob Herring <robh@kernel.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09drm/vmwgfx: Fix a buffer object leakThomas Hellstrom1-0/+1
commit 13f149d47392782baafd96d54d4e65f3b5ca342f upstream. A buffer object leak was introduced when fixing a premature buffer object release. Fix this. Cc: <stable@vger.kernel.org> Fixes: 73a88250b709 ("Fix a destoy-while-held mutex problem.") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01drm/i915: Enable display WA#1183 from its correct spotImre Deak1-6/+5
commit ac315c621f01d4b8a53dec317c7ae322fd26ff38 upstream. The DMC FW specific part of display WA#1183 is supposed to be enabled whenever enabling DC5 or DC6, so move it to the DC6 enable function from the DC6 disable function. I noticed this after Daniel's patch to remove the unused skl_disable_dc6() function. Fixes: 53421c2fe99c ("drm/i915: Apply Display WA #1183 on skl, kbl, and cfl") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419155109.29451-1-imre.deak@intel.com (cherry picked from commit b49be6622f08187129561cff0409f7b06b33de57) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shadersNicolai Hähnle1-2/+5
commit 75569c182e4f65cd8826a5853dc9cbca703cbd0e upstream. Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01drm/virtio: fix vq wait_event conditionGerd Hoffmann1-2/+2
commit d02d270014f70dcab0117776b81a37b6fca745ae upstream. Wait until we have enough space in the virt queue to actually queue up our request. Avoids the guest spinning in case we have a non-zero amount of free entries but not enough for the request. Cc: stable@vger.kernel.org Reported-by: Alain Magloire <amagloire@blackberry.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180403095904.11152-1-kraxel@redhat.com Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29drm: bridge: dw-hdmi: Fix overflow workaround for Amlogic Meson GX SoCsNeil Armstrong1-0/+3
commit 9c305eb442f3b371fc722ade827bbf673514123e upstream. The Amlogic Meson GX SoCs, embedded the v2.01a controller, has been also identified needing this workaround. This patch adds the corresponding version to enable a single iteration for this specific version. Fixes: be41fc55f1aa ("drm: bridge: dw-hdmi: Handle overflow workaround based on device version") Acked-by: Archit Taneja <architt@codeaurora.org> [narmstrong: s/identifies/identified and rebased against Jernej's change] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1519386277-25902-1-git-send-email-narmstrong@baylibre.com [narmstrong: v4.14 to v4.16 backport] Cc: <stable@vger.kernel.org> # 4.14.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/nouveau/pmu/fuc: don't use movw directly anymoreKarol Herbst4-1292/+1292
[ Upstream commit fe9748b7b41cee11f8db57fb8b20bc540a33102a ] Fixes failure to compile with recent envyas as a result of the 'movw' alias being removed for v5. A bit of history: v3 only has a 16-bit sign-extended immediate mov op. In order to set the high bits, there's a separate 'sethi' op. envyas validates that the value passed to mov(imm) is between -0x8000 and 0x7fff. In order to simplify macros that load both the low and high word, a 'movw' alias was added which takes an unsigned 16-bit immediate. However the actual hardware op still sign extends. v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op is gone (loads 0 into the dst reg). However due to a bug in envyas, the movw alias still existed, and selected the no-longer-present v3 16-bit immediate mov op. As a result usage of movw on v5 is the same as mov with a 0x0 argument. The proper fix throughout is to only ever use the 'movw' alias in combination with 'sethi'. Anything else should get the sign-extended validation to ensure that the intended value ends up in the destination register. Changes in fuc3 binaries is the result of a different encoding being selected for a mov with an 8-bit value. v2: added commit message written by Ilia, thanks for that! v3: messed up rebasing, now it should apply Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changingImre Deak3-9/+25
commit 5e1df40f40ee45a97bb1066c3d71f0ae920a9672 upstream. Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602c815 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com (cherry picked from commit e76019a81921e87a4d9e7b3d86102bc708a6c227) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (Rebased for v4.14 stable tree due to upstream cdclk_state and pcu_lock change) Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/i915: Fix LSPCON TMDS output buffer enabling from low-power stateImre Deak1-7/+32
commit 7eb2c4dd54ff841f2fe509a84973eb25fa20bda2 upstream. LSPCON adapters in low-power state may ignore the first I2C write during TMDS output buffer enabling, resulting in a blank screen even with an otherwise enabled pipe. Fix this by reading back and validating the written value a few times. The problem was noticed on GLK machines with an onboard LSPCON adapter after entering/exiting DC5 power state. Doing an I2C read of the adapter ID as the first transaction - instead of the I2C write to enable the TMDS buffers - returns the correct value. Based on this we assume that the transaction itself is sent properly, it's only the adapter that is not ready for some reason to accept this first write after waking from low-power state. In my case the second I2C write attempt always succeeded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854 Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/i915: Do no use kfree() to free a kmem_cache_alloc() return valueXidong Wang1-1/+1
commit fcf1fadf4c65eea6c519c773d2d9901e8ad94f5f upstream. Along the eb_lookup_vmas() error path, the return value from kmem_cache_alloc() was freed using kfree(). Fix it to use the proper kmem_cache_free() instead. Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Xidong Wang <wangxidong_97@163.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk (cherry picked from commit 6be1187dbffa0027ea379c53f7ca0c782515c610) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/i915/audio: Fix audio detection issue on GLKGaurav K Singh1-1/+1
commit b4615730530be85fc45ab4631c2ad6d8e2d0b97d upstream. On Geminilake, sometimes audio card is not getting detected after reboot. This is a spurious issue happening on Geminilake. HW codec and HD audio controller link was going out of sync for which there was a fix in i915 driver but was not getting invoked for GLK. Extending this fix to GLK as well. Tested by Du,Wenkai on GLK board. Bspec: 21829 v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N) Cc: <stable@vger.kernel.org> # b651bd2a3ae3 ("drm/i915/audio: Fix audio enumeration issue on BXT") Cc: <stable@vger.kernel.org> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by: Abhay Kumar <abhay.Kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523989338-29677-1-git-send-email-gaurav.k.singh@intel.com (cherry picked from commit 8221229046e862977ae93ec9d34aa583fbd10397) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/i915/gvt: throw error on unhandled vfio ioctlsGerd Hoffmann1-1/+1
commit 9f591ae60e1be026901398ef99eede91237aa3a1 upstream. On unknown/unhandled ioctls the driver should return an error, so userspace knows it tried to use something unsupported. Cc: stable@vger.kernel.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26drm/vc4: Fix memory leak during BO teardownDaniel J Blueman2-0/+3
commit c0db1b677e1d584fab5d7ac76a32e1c0157542e0 upstream. During BO teardown, an indirect list 'uniform_addr_offsets' wasn't being freed leading to leaking many 128B allocations. Fix the memory leak by releasing it at teardown time. Cc: stable@vger.kernel.org Fixes: 6d45c81d229d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180402071035.25356-1-daniel@quora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/i915: Correctly handle limited range YCbCr data on VLV/CHVVille Syrjälä2-18/+73
commit 5deae9191130db6b617c94fb261804597cf9b508 upstream. Turns out the VLV/CHV fixed function sprite CSC expects full range data as input. We've been feeding it limited range data to it all along. To expand the data out to full range we'll use the color correction registers (brightness, contrast, and saturation). On CHV pipe B we were actually doing the right thing already because we progammed the custom CSC matrix to do expect limited range input. Now that well pre-expand the data out with the color correction unit, we need to change the CSC matrix to operate with full range input instead. This should make the sprite output of the other pipes match the sprite output of pipe B reasonably well. Looking at the resulting pipe CRCs, there can be a slight difference in the output, but as I don't know the formula used by the fixed function CSC of the other pipes, I don't think it's worth the effort to try to match the output exactly. It might not even be possible due to difference in internal precision etc. One slight caveat here is that the color correction registers are single bufferred, so we should really be updating them during vblank, but we still don't have a mechanism for that, so just toss in another FIXME. v2: Rebase v3: s/bri/brightness/ s/con/contrast/ (Shashank) v4: Clarify the constants and math (Shashank) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Tang, Jun" <jun.tang@intel.com> Reported-by: "Tang, Jun" <jun.tang@intel.com> Cc: stable@vger.kernel.org Fixes: 7f1f3851feb0 ("drm/i915: sprite support for ValleyView v4") Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-5-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/radeon: Fix PCIe lane width calculationPaul Parsons1-2/+2
commit 85e290d92b4b794d0c758c53007eb4248d385386 upstream. Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver. The dmesg output included driver warnings about an invalid PCIe lane width. Tracking the problem back led to si_set_pcie_lane_width_in_smc(). The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Applying the increment silenced the warnings. The code has not changed since, so either my analysis was incorrect or the bug has gone unnoticed. Hence submitting this as an RFC. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 09:16:12 +0300