summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2021-05-22drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors ↵Kai-Heng Feng3-0/+12
are connected commit 227545b9a08c68778ddd89428f99c351fc9315ac upstream. Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and another one is 4K 30Hz (pixelclock 297MHz). The issue is gone after setting "power_dpm_force_performance_level" to "high". Following the indication, we found that the issue occurs when sclk is too low. So resolve the issue by disabling sclk switching when there are two monitors requires high pixelclock (> 297MHz). v2: - Only apply the fix to Oland. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22drm/radeon: Fix off-by-one power_state index heap overwriteKees Cook1-3/+3
[ Upstream commit 5bbf219328849e83878bddb7c226d8d42e84affc ] An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22drm/radeon: fix copy of uninitialized variable back to userspaceColin Ian King1-0/+1
commit 8dbc2ccac5a65c5b57e3070e36a3dc97c7970d96 upstream. Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can copy back uninitialised data in value_tmp that pointer *value points to. This can occur when rdev->family is less than CHIP_BONAIRE and less than CHIP_TAHITI. Fix this by adding in a missing -EINVAL so that no invalid value is copied back to userspace. Addresses-Coverity: ("Uninitialized scalar variable) Cc: stable@vger.kernel.org # 3.13+ Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22Fix misc new gcc warningsLinus Torvalds1-1/+1
commit e7c6e405e171fb33990a12ecfd14e6500d9e5cf2 upstream. It seems like Fedora 34 ends up enabling a few new gcc warnings, notably "-Wstringop-overread" and "-Warray-parameter". Both of them cause what seem to be valid warnings in the kernel, where we have array size mismatches in function arguments (that are no longer just silently converted to a pointer to element, but actually checked). This fixes most of the trivial ones, by making the function declaration match the function definition, and in the case of intel_pm.c, removing the over-specified array size from the argument declaration. At least one 'stringop-overread' warning remains in the i915 driver, but that one doesn't have the same obvious trivial fix, and may or may not actually be indicative of a bug. [ It was a mistake to upgrade one of my machines to Fedora 34 while being busy with the merge window, but if this is the extent of the compiler upgrade problems, things are better than usual - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrey Zhizhikin <andrey.z@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22drm/amdgpu: fix NULL pointer dereferenceGuchun Chen1-1/+1
[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ] ttm->sg needs to be checked before accessing its child member. Call Trace: amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu] ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm] ttm_bo_release+0x17d/0x300 [ttm] amdgpu_bo_unref+0x1a/0x30 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu] kfd_ioctl+0x222/0x400 [amdgpu] ? kfd_dev_is_large_bar+0x90/0x90 [amdgpu] __x64_sys_ioctl+0x8e/0xd0 ? __context_tracking_exit+0x52/0x90 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f97f264d317 Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317 RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003 RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004 R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16 R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotalMarijn Suijten1-1/+9
[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ] Leaving this at a close-to-maximum register value 0xFFF0 means it takes very long for the MDSS to generate a software vsync interrupt when the hardware TE interrupt doesn't arrive. Configuring this to double the vtotal (like some downstream kernels) leads to a frame to take at most twice before the vsync signal, until hardware TE comes up. In this case the hardware interrupt responsible for providing this signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at all. This solves severe panel update issues observed on at least the Xperia Loire and Tone series, until said gpio is properly hooked up to an irq. Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac7c4fshaoyunl1-1/+1
[ Upstream commit c8941550aa66b2a90f4b32c45d59e8571e33336e ] This recent change introduce SDMA interrupt info printing with irq->process function. These functions do not require a set function to enable/disable the irq Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-16drm/imx: imx-ldb: fix out of bounds array access warningArnd Bergmann1-0/+10
[ Upstream commit 33ce7f2f95cabb5834cf0906308a5cb6103976da ] When CONFIG_OF is disabled, building with 'make W=1' produces warnings about out of bounds array access: drivers/gpu/drm/imx/imx-ldb.c: In function 'imx_ldb_set_clock.constprop': drivers/gpu/drm/imx/imx-ldb.c:186:8: error: array subscript -22 is below array bounds of 'struct clk *[4]' [-Werror=array-bounds] Add an error check before the index is used, which helps with the warning, as well as any possible other error condition that may be triggered at runtime. The warning could be fixed by adding a Kconfig depedency on CONFIG_OF, but Liu Ying points out that the driver may hit the out-of-bounds problem at runtime anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-10drm/msm: Ratelimit invalid-fence messageRob Clark1-1/+1
[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ] We have seen a couple cases where low memory situations cause something bad to happen, followed by a flood of these messages obscuring the root cause. Lets ratelimit the dmesg spam so that next time it happens we don't lose the kernel traces leading up to this. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07drm/amdgpu: check alignment on CPU page for bo mapXℹ Ruoyao1-4/+4
commit e3512fb67093fabdf27af303066627b921ee9bd8 upstream. The page table of AMDGPU requires an alignment to CPU page so we should check ioctl parameters for it. Return -EINVAL if some parameter is unaligned to CPU page, instead of corrupt the page table sliently. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()Nirmoy Das1-1/+1
commit 5e61b84f9d3ddfba73091f9fbc940caae1c9eb22 upstream. Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/msm: fix shutdown hook in case GPU components failed to bindDmitry Baryshkov1-0/+4
[ Upstream commit 623f279c77811475ac8fd5635cc4e4451aa71291 ] If GPU components have failed to bind, shutdown callback would fail with the following backtrace. Add safeguard check to stop that oops from happening and allow the board to reboot. [ 66.617046] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 66.626066] Mem abort info: [ 66.628939] ESR = 0x96000006 [ 66.632088] EC = 0x25: DABT (current EL), IL = 32 bits [ 66.637542] SET = 0, FnV = 0 [ 66.640688] EA = 0, S1PTW = 0 [ 66.643924] Data abort info: [ 66.646889] ISV = 0, ISS = 0x00000006 [ 66.650832] CM = 0, WnR = 0 [ 66.653890] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107f81000 [ 66.660505] [0000000000000000] pgd=0000000100bb2003, p4d=0000000100bb2003, pud=0000000100897003, pmd=0000000000000000 [ 66.671398] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 66.677115] Modules linked in: [ 66.680261] CPU: 6 PID: 352 Comm: reboot Not tainted 5.11.0-rc2-00309-g79e3faa756b2 #38 [ 66.688473] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 66.695347] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 66.701507] pc : msm_atomic_commit_tail+0x78/0x4e0 [ 66.706437] lr : commit_tail+0xa4/0x184 [ 66.710381] sp : ffff8000108f3af0 [ 66.713791] x29: ffff8000108f3af0 x28: ffff418c44337000 [ 66.719242] x27: 0000000000000000 x26: ffff418c40a24490 [ 66.724693] x25: ffffd3a842a4f1a0 x24: 0000000000000008 [ 66.730146] x23: ffffd3a84313f030 x22: ffff418c444ce000 [ 66.735598] x21: ffff418c408a4980 x20: 0000000000000000 [ 66.741049] x19: 0000000000000000 x18: ffff800010710fbc [ 66.746500] x17: 000000000000000c x16: 0000000000000001 [ 66.751954] x15: 0000000000010008 x14: 0000000000000068 [ 66.757405] x13: 0000000000000001 x12: 0000000000000000 [ 66.762855] x11: 0000000000000001 x10: 00000000000009b0 [ 66.768306] x9 : ffffd3a843192000 x8 : ffff418c44337000 [ 66.773757] x7 : 0000000000000000 x6 : 00000000a401b34e [ 66.779210] x5 : 00ffffffffffffff x4 : 0000000000000000 [ 66.784660] x3 : 0000000000000000 x2 : ffff418c444ce000 [ 66.790111] x1 : ffffd3a841dce530 x0 : ffff418c444cf000 [ 66.795563] Call trace: [ 66.798075] msm_atomic_commit_tail+0x78/0x4e0 [ 66.802633] commit_tail+0xa4/0x184 [ 66.806217] drm_atomic_helper_commit+0x160/0x390 [ 66.811051] drm_atomic_commit+0x4c/0x60 [ 66.815082] drm_atomic_helper_disable_all+0x1f4/0x210 [ 66.820355] drm_atomic_helper_shutdown+0x80/0x130 [ 66.825276] msm_pdev_shutdown+0x14/0x20 [ 66.829303] platform_shutdown+0x28/0x40 [ 66.833330] device_shutdown+0x158/0x330 [ 66.837357] kernel_restart+0x40/0xa0 [ 66.841122] __do_sys_reboot+0x228/0x250 [ 66.845148] __arm64_sys_reboot+0x28/0x34 [ 66.849264] el0_svc_common.constprop.0+0x74/0x190 [ 66.854187] do_el0_svc+0x24/0x90 [ 66.857595] el0_svc+0x14/0x20 [ 66.860739] el0_sync_handler+0x1a4/0x1b0 [ 66.864858] el0_sync+0x174/0x180 [ 66.868269] Code: 1ac020a0 2a000273 eb02007f 54ffff01 (f9400285) [ 66.874525] ---[ end trace 20dedb2a3229fec8 ]--- Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30drm/radeon: fix AGP dependencyChristian König1-0/+1
[ Upstream commit cba2afb65cb05c3d197d17323fee4e3c9edef9cd ] When AGP is compiled as module radeon must be compiled as module as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17drm: meson_drv add shutdown functionArtem Lapkin1-0/+11
commit fa0c16caf3d73ab4d2e5d6fa2ef2394dbec91791 upstream. Problem: random stucks on reboot stage about 1/20 stuck/reboots // debug kernel log [ 4.496660] reboot: kernel restart prepare CMD:(null) [ 4.498114] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin [ 4.503949] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU... ...STUCK... Solution: add shutdown function to meson_drm driver // debug kernel log [ 5.231896] reboot: kernel restart prepare CMD:(null) [ 5.246135] [drm:meson_drv_shutdown] ... [ 5.259271] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin [ 5.274688] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU... [ 5.338331] reboot: Restarting system [ 5.358293] psci: PSCI_0_2_FN_SYSTEM_RESET reboot_mode:0 cmd:(null) bl31 reboot reason: 0xd bl31 reboot reason: 0x0 system cmd 1. ...REBOOT... Tested: on VIM1 VIM2 VIM3 VIM3L khadas sbcs - 1000+ successful reboots and Odroid boards, WeTek Play2 (GXBB) Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Artem Lapkin <art@khadas.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210302042202.3728113-1-art@khadas.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/compat: Clear bounce structuresDaniel Vetter1-0/+11
commit de066e116306baf3a6a62691ac63cfc0b1dabddb upstream. Some of them have gaps, or fields we don't clear. Native ioctl code does full copies plus zero-extends on size mismatch, so nothing can leak. But compat is more hand-rolled so need to be careful. None of these matter for performance, so just memset. Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those are security holes anyway. Acked-by: Maxime Ripard <mripard@kernel.org> Reported-by: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com # vblank ioctl Cc: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210222100643.400935-1-daniel.vetter@ffwll.ch (cherry picked from commit e926c474ebee404441c838d18224cd6f246a71b7) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11drm/msm/a5xx: Remove overwriting A5XX_PC_DBG_ECO_CNTL registerAngeloGioacchino Del Regno1-2/+0
[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ] The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets programmed to some different values on a per-model basis. At least, this is what we intend to do here; Unfortunately, though, this register is being overwritten with a static magic number, right after applying the GPU-specific configuration (including the GPU-specific quirks) and that is effectively nullifying the efforts. Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL register in order to retain the wanted configuration for the target GPU. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07drm/virtio: use kvmalloc for large allocationsSergey Senozhatsky1-3/+3
commit ea86f3defd55f141a44146e66cbf8ffb683d60da upstream. We observed that some of virtio_gpu_object_shmem_init() allocations can be rather costly - order 6 - which can be difficult to fulfill under memory pressure conditions. Switch to kvmalloc_array() in virtio_gpu_object_shmem_init() and let the kernel vmalloc the entries array. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20201105014744.1662226-1-senozhatsky@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Doug Horn <doughorn@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)Konrad Dybcio1-1/+1
[ Upstream commit 33a7808ce1aea6e2edc1af25db25928137940c02 ] The previous registers were *almost* correct, but instead of PHYs, they were pointing at DSI PLLs, resulting in the PHY id autodetection failing miserably. Fixes: dcefc117cc19 ("drm/msm/dsi: Add support for msm8x94") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03gma500: clean up error handling in initDan Carpenter1-9/+13
[ Upstream commit 15ccc39b3aab667c6fa131206f01f31bfbccdf6a ] The main problem with this error handling was that it didn't clean up if i2c_add_numbered_adapter() failed. This code is pretty old, and doesn't match with today's checkpatch.pl standards so I took the opportunity to tidy it up a bit. I changed the NULL comparison, and removed the WARNING message if kzalloc() fails and updated the label names. Fixes: 1b082ccf5901 ("gma500: Add Oaktrail support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/X8ikkAqZfnDO2lu6@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03drm/gma500: Fix error return code in psb_driver_load()Jialin Zhang1-0/+2
[ Upstream commit 6926872ae24452d4f2176a3ba2dee659497de2c4 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5c49fd3aa0ab ("gma500: Add the core DRM files and headers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201130020216.1906141-1-zhangjialin11@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/i2c/gm200: increase width of aux semaphore owner fieldsBen Skeggs1-4/+4
[ Upstream commit ba6e9ab0fcf3d76e3952deb12b5f993991621d9c ] Noticed while debugging GA102. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/privring: ack interrupts the same way as RMBen Skeggs2-6/+14
[ Upstream commit e05e06cd34f5311f677294a08b609acfbc315236 ] Whatever it is that we were doing before doesn't work on Ampere. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/bios: fix issue shadowing expansion ROMsBen Skeggs1-1/+1
[ Upstream commit 402a89660e9dc880710b12773076a336c9dab3d7 ] This issue has generally been covered up by the presence of additional expansion ROMs after the ones we're interested in, with header fetches of subsequent images loading enough of the ROM to hide the issue. Noticed on GA102, which lacks a type 0x70 image compared to TU102,. [ 906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes [ 906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes [ 906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes [ 906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes vs [ 22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes [ 22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes [ 23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes [ 23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes [ 23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/atomic: put state on error pathPan Bian1-1/+1
commit 43b67309b6b2a3c08396cc9b3f83f21aa529d273 upstream. Put the state before returning error code. Fixes: 44596b8c4750 ("drm/atomic: Unify conflicting encoder handling.") Signed-off-by: Pan Bian <bianpan2016@163.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210119121127.84127-1-bianpan2016@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17drm/i915: Fix mismatch between misplaced vma check and vma insertChris Wilson1-1/+1
commit 0e53656ad8abc99e0a80c3de611e593ebbf55829 upstream When inserting a VMA, we restrict the placement to the low 4G unless the caller opts into using the full range. This was done to allow usersapce the opportunity to transition slowly from a 32b address space, and to avoid breaking inherent 32b assumptions of some commands. However, for insert we limited ourselves to 4G-4K, but on verification we allowed the full 4G. This causes some attempts to bind a new buffer to sporadically fail with -ENOSPC, but at other times be bound successfully. commit 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") suggests that there is a genuine problem with stateless addressing that cannot utilize the last page in 4G and so we purposefully excluded it. This means that the quick pin pass may cause us to utilize a buggy placement. Reported-by: CQ Tang <cq.tang@intel.com> Testcase: igt/gem_exec_params/larger-than-life-batch Fixes: 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: CQ Tang <cq.tang@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk (cherry picked from commit 5f22cc0b134ab702d7f64b714e26018f7288ffee) Signed-off-by: Jani Nikula <jani.nikula@intel.com> [sudip: use file from old path] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()Zwane Mwaikambo1-1/+1
commit 73b62cdb93b68d7e2c1d373c6a411bc00c53e702 upstream. I observed this when unplugging a DP monitor whilst a computer is asleep and then waking it up. This left DP chardev nodes still being present on the filesystem and accessing these device nodes caused an oops because drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened. This can also be reproduced by creating a device node with mknod(1) and issuing an open(2) [166164.933198] BUG: kernel NULL pointer dereference, address: 0000000000000018 [166164.933202] #PF: supervisor read access in kernel mode [166164.933204] #PF: error_code(0x0000) - not-present page [166164.933205] PGD 0 P4D 0 [166164.933208] Oops: 0000 [#1] PREEMPT SMP NOPTI [166164.933211] CPU: 4 PID: 99071 Comm: fwupd Tainted: G W 5.8.0-rc6+ #1 [166164.933213] Hardware name: LENOVO 20RD002VUS/20RD002VUS, BIOS R16ET25W (1.11 ) 04/21/2020 [166164.933232] RIP: 0010:drm_dp_aux_dev_get_by_minor+0x29/0x70 [drm_kms_helper] [166164.933234] Code: 00 0f 1f 44 00 00 55 48 89 e5 41 54 41 89 fc 48 c7 c7 60 01 a4 c0 e8 26 ab 30 d7 44 89 e6 48 c7 c7 80 01 a4 c0 e8 47 94 d6 d6 <8b> 50 18 49 89 c4 48 8d 78 18 85 d2 74 33 8d 4a 01 89 d0 f0 0f b1 [166164.933236] RSP: 0018:ffffb7d7c41cbbf0 EFLAGS: 00010246 [166164.933237] RAX: 0000000000000000 RBX: ffff8a90001fe900 RCX: 0000000000000000 [166164.933238] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffffc0a40180 [166164.933239] RBP: ffffb7d7c41cbbf8 R08: 0000000000000000 R09: ffff8a93e157d6d0 [166164.933240] R10: 0000000000000000 R11: ffffffffc0a40188 R12: 0000000000000003 [166164.933241] R13: ffff8a9402200e80 R14: ffff8a90001fe900 R15: 0000000000000000 [166164.933244] FS: 00007f7fb041eb00(0000) GS:ffff8a9411500000(0000) knlGS:0000000000000000 [166164.933245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [166164.933246] CR2: 0000000000000018 CR3: 00000000352c2003 CR4: 00000000003606e0 [166164.933247] Call Trace: [166164.933264] auxdev_open+0x1b/0x40 [drm_kms_helper] [166164.933278] chrdev_open+0xa7/0x1c0 [166164.933282] ? cdev_put.part.0+0x20/0x20 [166164.933287] do_dentry_open+0x161/0x3c0 [166164.933291] vfs_open+0x2d/0x30 [166164.933297] path_openat+0xb27/0x10e0 [166164.933306] ? atime_needs_update+0x73/0xd0 [166164.933309] do_filp_open+0x91/0x100 [166164.933313] ? __alloc_fd+0xb2/0x150 [166164.933316] do_sys_openat2+0x210/0x2d0 [166164.933318] do_sys_open+0x46/0x80 [166164.933320] __x64_sys_openat+0x20/0x30 [166164.933328] do_syscall_64+0x52/0xc0 [166164.933336] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (gdb) disassemble drm_dp_aux_dev_get_by_minor+0x29 Dump of assembler code for function drm_dp_aux_dev_get_by_minor: 0x0000000000017b10 <+0>: callq 0x17b15 <drm_dp_aux_dev_get_by_minor+5> 0x0000000000017b15 <+5>: push %rbp 0x0000000000017b16 <+6>: mov %rsp,%rbp 0x0000000000017b19 <+9>: push %r12 0x0000000000017b1b <+11>: mov %edi,%r12d 0x0000000000017b1e <+14>: mov $0x0,%rdi 0x0000000000017b25 <+21>: callq 0x17b2a <drm_dp_aux_dev_get_by_minor+26> 0x0000000000017b2a <+26>: mov %r12d,%esi 0x0000000000017b2d <+29>: mov $0x0,%rdi 0x0000000000017b34 <+36>: callq 0x17b39 <drm_dp_aux_dev_get_by_minor+41> 0x0000000000017b39 <+41>: mov 0x18(%rax),%edx <========= 0x0000000000017b3c <+44>: mov %rax,%r12 0x0000000000017b3f <+47>: lea 0x18(%rax),%rdi 0x0000000000017b43 <+51>: test %edx,%edx 0x0000000000017b45 <+53>: je 0x17b7a <drm_dp_aux_dev_get_by_minor+106> 0x0000000000017b47 <+55>: lea 0x1(%rdx),%ecx 0x0000000000017b4a <+58>: mov %edx,%eax 0x0000000000017b4c <+60>: lock cmpxchg %ecx,(%rdi) 0x0000000000017b50 <+64>: jne 0x17b76 <drm_dp_aux_dev_get_by_minor+102> 0x0000000000017b52 <+66>: test %edx,%edx 0x0000000000017b54 <+68>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93> 0x0000000000017b56 <+70>: test %ecx,%ecx 0x0000000000017b58 <+72>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93> 0x0000000000017b5a <+74>: mov $0x0,%rdi 0x0000000000017b61 <+81>: callq 0x17b66 <drm_dp_aux_dev_get_by_minor+86> 0x0000000000017b66 <+86>: mov %r12,%rax 0x0000000000017b69 <+89>: pop %r12 0x0000000000017b6b <+91>: pop %rbp 0x0000000000017b6c <+92>: retq 0x0000000000017b6d <+93>: xor %esi,%esi 0x0000000000017b6f <+95>: callq 0x17b74 <drm_dp_aux_dev_get_by_minor+100> 0x0000000000017b74 <+100>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74> 0x0000000000017b76 <+102>: mov %eax,%edx 0x0000000000017b78 <+104>: jmp 0x17b43 <drm_dp_aux_dev_get_by_minor+51> 0x0000000000017b7a <+106>: xor %r12d,%r12d 0x0000000000017b7d <+109>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74> End of assembler dump. (gdb) list *drm_dp_aux_dev_get_by_minor+0x29 0x17b39 is in drm_dp_aux_dev_get_by_minor (drivers/gpu/drm/drm_dp_aux_dev.c:65). 60 static struct drm_dp_aux_dev *drm_dp_aux_dev_get_by_minor(unsigned index) 61 { 62 struct drm_dp_aux_dev *aux_dev = NULL; 63 64 mutex_lock(&aux_idr_mutex); 65 aux_dev = idr_find(&aux_idr, index); 66 if (!kref_get_unless_zero(&aux_dev->refcount)) 67 aux_dev = NULL; 68 mutex_unlock(&aux_idr_mutex); 69 (gdb) p/x &((struct drm_dp_aux_dev *)(0x0))->refcount $8 = 0x18 Looking at the caller, checks on the minor are pushed down to drm_dp_aux_dev_get_by_minor() static int auxdev_open(struct inode *inode, struct file *file) { unsigned int minor = iminor(inode); struct drm_dp_aux_dev *aux_dev; aux_dev = drm_dp_aux_dev_get_by_minor(minor); <==== if (!aux_dev) return -ENODEV; file->private_data = aux_dev; return 0; } Fixes: e94cb37b34eb ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Zwane Mwaikambo <zwane@yosper.io> Reviewed-by: Lyude Paul <lyude@redhat.com> [added Cc to stable] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2010122231070.38717@montezuma.home Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()Yang Yingliang1-0/+1
[ Upstream commit 723ae803218da993143387bf966042eccefac077 ] Return -ENOMEM when allocating refill memory failed. Fixes: 71e8831f6407 ("drm/omap: DMM/TILER support for OMAP4+ platform") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201117061045.3452287-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29drm/gma500: fix double free of gma_connectorTom Rix1-1/+1
[ Upstream commit 4e19d51ca5b28a1d435a844c7b2a8e1b1b6fa237 ] clang static analysis reports this problem: cdv_intel_dp.c:2101:2: warning: Attempt to free released memory kfree(gma_connector); ^~~~~~~~~~~~~~~~~~~~ In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off() fails, the handler calls cdv_intel_dp_destroy(connector) which does the first free of gma_connector. So adjust the goto label and skip the second free. Fixes: d112a8163f83 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201003193928.18869-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29drm/tegra: sor: Disable clocks on error in tegra_sor_init()Qinglang Miao1-2/+8
[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ] Fix the missing clk_disable_unprepare() before return from tegra_sor_init() in the error handling case. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong1-3/+4
commit a34a0a632dd991a371fec56431d73279f9c54029 upstream drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine [sudip: use old functions before rename] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18drm/gma500: Fix out-of-bounds access to struct drm_device.vblank[]Thomas Zimmermann1-22/+12
commit 06ad8d339524bf94b89859047822c31df6ace239 upstream. The gma500 driver expects 3 pipelines in several it's IRQ functions. Accessing struct drm_device.vblank[], this fails with devices that only have 2 pipelines. An example KASAN report is shown below. [ 62.267688] ================================================================== [ 62.268856] BUG: KASAN: slab-out-of-bounds in psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.269450] Read of size 1 at addr ffff8880012bc6d0 by task systemd-udevd/285 [ 62.269949] [ 62.270192] CPU: 0 PID: 285 Comm: systemd-udevd Tainted: G E 5.10.0-rc1-1-default+ #572 [ 62.270807] Hardware name: /DN2800MT, BIOS MTCDT10N.86A.0164.2012.1213.1024 12/13/2012 [ 62.271366] Call Trace: [ 62.271705] dump_stack+0xae/0xe5 [ 62.272180] print_address_description.constprop.0+0x17/0xf0 [ 62.272987] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.273474] __kasan_report.cold+0x20/0x38 [ 62.273989] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.274460] kasan_report+0x3a/0x50 [ 62.274891] psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.275380] drm_irq_install+0x131/0x1f0 <...> [ 62.300751] Allocated by task 285: [ 62.301223] kasan_save_stack+0x1b/0x40 [ 62.301731] __kasan_kmalloc.constprop.0+0xbf/0xd0 [ 62.302293] drmm_kmalloc+0x55/0x100 [ 62.302773] drm_vblank_init+0x77/0x210 Resolve the issue by only handling vblank entries up to the number of CRTCs. I'm adding a Fixes tag for reference, although the bug has been present since the driver's initial commit. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 5c49fd3aa0ab ("gma500: Add the core DRM files and headers") Cc: Alan Cox <alan@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org#v3.3+ Link: https://patchwork.freedesktop.org/patch/msgid/20201105190256.3893-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18drm/amdgpu: perform srbm soft reset always on SDMA resumeEvan Quan1-15/+12
[ Upstream commit 253475c455eb5f8da34faa1af92709e7bb414624 ] This can address the random SDMA hang after pci config reset seen on Hawaii. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
[ Upstream commit 9ce0af3e9573fb84c4c807183d13ea2a68271e4b ] There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10drm/i915: Break up error capture compression loops with cond_resched()Chris Wilson1-0/+3
commit 7d5553147613b50149238ac1385c60e5c7cacb34 upstream. As the error capture will compress user buffers as directed to by the user, it can take an arbitrary amount of time and space. Break up the compression loops with a call to cond_resched(), that will allow other processes to schedule (avoiding the soft lockups) and also serve as a warning should we try to make this loop atomic in the future. Testcase: igt/gem_exec_capture/many-* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk (cherry picked from commit 293f43c80c0027ff9299036c24218ac705ce584e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/ttm: fix eviction valuable range check.Dave Airlie1-1/+1
commit fea456d82c19d201c21313864105876deabe148b upstream. This was adding size to start, but pfn and start are in pages, so it should be using num_pages. Not sure this fixes anything in the real world, just noticed it during refactoring. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20201019222257.1684769-2-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdgpu: don't map BO in reserved regionMadhav Chauhan1-0/+10
commit c4aa8dff6091cc9536aeb255e544b0b4ba29faf4 upstream. 2MB area is reserved at top inside VM. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/i915: Force VT'd workarounds when running as a guest OSChris Wilson1-1/+5
commit 8195400f7ea95399f721ad21f4d663a62c65036f upstream. If i915.ko is being used as a passthrough device, it does not know if the host is using intel_iommu. Mixing the iommu and gfx causes a few issues (such as scanout overfetch) which we need to workaround inside the driver, so if we detect we are running under a hypervisor, also assume the device access is being virtualised. Reported-by: Stefan Fritsch <sf@sfritsch.de> Suggested-by: Stefan Fritsch <sf@sfritsch.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Stefan Fritsch <sf@sfritsch.de> Cc: stable@vger.kernel.org Tested-by: Stefan Fritsch <sf@sfritsch.de> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk (cherry picked from commit f566fdcd6cc49a9d5b5d782f56e3e7cb243f01b8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/bridge/synopsys: dsi: add support for non-continuous HS clockAntonio Borneo1-2/+7
[ Upstream commit c6d94e37bdbb6dfe7e581e937a915ab58399b8a5 ] Current code enables the HS clock when video mode is started or to send out a HS command, and disables the HS clock to send out a LP command. This is not what DSI spec specify. Enable HS clock either in command and in video mode. Set automatic HS clock management for panels and devices that support non-continuous HS clock. Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701194234.18123-1-yannick.fertre@st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctlyNadezda Lutovinova1-2/+10
[ Upstream commit f688a345f0d7a6df4dd2aeca8e4f3c05e123a0ee ] If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr, then a null pointer dereference is accessed. The patch adds checking of the return value of ge_b850v3_lvds_init(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Fix use after free in get_capset_info callback.Doug Horn2-3/+9
[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ] If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets. Signed-off-by: Doug Horn <doughorn@google.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29drm/gma500: fix error checkTom Rix1-1/+1
[ Upstream commit cdd296cdae1af2d27dae3fcfbdf12c5252ab78cf ] Reviewing this block of code in cdv_intel_dp_init() ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ... cdv_intel_edp_panel_vdd_off(gma_encoder); if (ret == 0) { /* if this fails, presume the device is a ghost */ DRM_INFO("failed to retrieve link info, disabling eDP\n"); drm_encoder_cleanup(encoder); cdv_intel_dp_destroy(connector); goto err_priv; } else { The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure. So change to <= Fixes: d112a8163f83 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14drm/amdgpu: prevent double kfree ttm->sgPhilip Yang1-0/+1
[ Upstream commit 1d0e16ac1a9e800598dcfa5b6bc53b704a103390 ] Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14drm/syncobj: Fix drm_syncobj_handle_to_fd refcount leakGiuliano Procida1-1/+0
Commit 5fb252cad61f20ae5d5a8b199f6cc4faf6f418e1, a cherry-pick of upstream commit e7cdf5c82f1773c3386b93bbcf13b9bfff29fa31, introduced a refcount imbalance and thus a struct drm_syncobj object leak which can be triggered with DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD. The function drm_syncobj_handle_to_fd first calls drm_syncobj_find which increments the refcount of the object on success. In all of the drm_syncobj_handle_to_fd error paths, the refcount is decremented, but in the success path the refcount should remain at +1 as the struct drm_syncobj now belongs to the newly opened file. Instead, the refcount was incremented again to +2. Fixes: 5fb252cad61f ("drm/syncobj: Stop reusing the same struct file for all syncobj -> fd") Signed-off-by: Giuliano Procida <gprocida@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14drm/sun4i: mixer: Extend regmap max_registerMartin Cerveny1-1/+1
[ Upstream commit 74ea06164cda81dc80e97790164ca533fd7e3087 ] Better guess. Secondary CSC registers are from 0xF0000. Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-3-m.cerveny@computer.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_configJean Delvare1-1/+1
commit a39d0d7bdf8c21ac7645c02e9676b5cb2b804c31 upstream. A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation. Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: stable@vger.kernel.org Cc: Navid Emamdoost <navid.emamdoost@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01drm/vc4/vc4_hdmi: fill ASoC card ownerMarek Szyprowski1-0/+1
[ Upstream commit ec653df2a0cbc306a4bfcb0e3484d318fa779002 ] card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/nouveau/debugfs: fix runtime pm imbalance on errorDinghao Liu1-1/+4
[ Upstream commit 00583fbe8031f69bba8b0a9a861efb75fb7131af ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amdgpu: increase atombios cmd timeoutJohn Clements1-2/+2
[ Upstream commit 1b3460a8b19688ad3033b75237d40fa580a5a953 ] mitigates race condition on BACO reset between GPU bootcode and driver reload Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/omap: fix possible object reference leakWen Yang1-1/+3
[ Upstream commit 47340e46f34a3b1d80e40b43ae3d7a8da34a3541 ] The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01gma/gma500: fix a memory disclosure bug due to uninitialized bytesKangjie Lu1-0/+2
[ Upstream commit 57a25a5f754ce27da2cfa6f413cfd366f878db76 ] `best_clock` is an object that may be sent out. Object `clock` contains uninitialized bytes that are copied to `best_clock`, which leads to memory disclosure and information leak. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191018042953.31099-1-kjlu@umn.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 16:44:33 +0300