summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2017-06-08drm/i915/gvt: Add runtime_pm get/put to proctect MMIO accessingChuanxiao Dong2-0/+22
In some cases, GVT-g is accessing MMIO without holding runtime_pm and this patch can add the inline API for doing the runtime_pm get/put to make sure when accessing HW MMIO the i915 HW is really powered on. Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: remove redundant -WallNick Desaulniers1-1/+1
This flag is already set in the top level Makefile of the kernel. Also, by having set CONFIG_DRM_I915_GVT, thereby appending -Wall to ccflags, you undo all the -Wno-* cflags previously set in the Make variable KBUILD_CFLAGS. For example: cc foo.c -Wall -Wno-format -Wall resets -Wformat. Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Legacy HSW related MMIO handler clean upfred gao2-25/+15
remove all the legacy pre-BDW mmio handlers and the corresponding usage/definition since pre-BDW platforms are not supported in GVT environment. v2: - clean up all the left dirty code before BDW, e.g all D_HSW usage and itself, D_IVB, D_PRE_BDW. (Zhenyu) v3: - change is based on gvt-staging. (Zhenyu) Signed-off-by: fred gao <fred.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Trigger scheduling after context completePing Gao1-0/+4
The time based scheduler poll context busy status at every micro-second during vGPU switch, it will make GPU idle for a while when the context is very small and completed before the next micro-second arrival. Trigger scheduling immediately after context complete will eliminate GPU idle and improve performance. Create two vGPU with same type, run Heaven simultaneously: Before this patch: +---------+----------+----------+ | | vGPU1 | vGPU2 | +---------+----------+----------+ | Heaven | 357 | 354 | +-------------------------------+ After this patch: +---------+----------+----------+ | | vGPU1 | vGPU2 | +---------+----------+----------+ | Heaven | 397 | 398 | +-------------------------------+ v2: Let need_reschedule protect by gvt-lock. Signed-off-by: Ping Gao <ping.a.gao@intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Support event based schedulingPing Gao3-6/+18
This patch decouple the time slice calculation and scheduler, let other event be able to trigger scheduling without impact the calculation for QoS. v2: add only one new enum definition. v3: fix typo. Signed-off-by: Ping Gao <ping.a.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Delete gvt_dbg_cmd() in cmd_parser_exec()Xiong Zhang1-6/+0
Since cmd message have been recorded in trace, gvt_dbg_cmd isn't necessary. This will reduce much of dmesg as gvt_dbg_cmd is repeated on each workload. Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Change flood gvt dmesg into traceXiong Zhang5-18/+119
Currently gvt dmesg is so heavy at drm.debug=0x2 that guest and host almost couldn't run on xengt. This patch transfer these repeated messages into trace, so dmesg is light at drm.debug=0x2, and user could get the target message through trace event and trace filter. Suggested-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: clean up the unused last_ctx_submit_time of struct intel_vgpuChangbin Du2-2/+0
Clean up it as it is not used now. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: add RING_INSTDONE and SC_INSTDONE mmio handler in GVT-gWeinan Li2-7/+15
kernel hangcheck needs to check RING_INSTDONE and SC_INSTDONE registers' state to know if hardware is still running. In GVT-g environment, we need to emulate these registers changing for all the guests although they are not render owner. Here we return the physical state for all the guests, then if INSTDONE is changing guest can know hardware is still running although its workload is pending. Read INSTDONE isn't one correct way to know if guest trigger gfx reset, especially with Linux guest, it will read ACTH first, then check INSTDONE and SUBSLICE registers to check if hardware is still running, at last trigger gfx reset when it finds all the registers is frozen. In Windows guest, read INSTDONE usually happens when OS detect TDR. With the difference between Windows and Linux guest, "disable_warn_untrack" may let debug log run into wrong state(Linux guest trigger hangcheck with no ACTHD changed, then check INSTDONE), but actually there is no TDR happened. The new policy is always WARN with untrack MMIO r/w. Bad effect is many noisy untrack mmio warning logs exist when real TDR happen. Even so you can control the log output or not by setting the debug mask bit. v2: remove log in instdone_mmio_read Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: implement per-vm mmio switching optimizationChangbin Du6-12/+80
Commit ab9da627906a ("drm/i915: make context status notifier head be per engine") gives us a chance to inspect every single request. Then we can eliminate unnecessary mmio switching for same vGPU. We only need mmio switching for different VMs (including host). This patch introduced a new general API intel_gvt_switch_mmio() to replace the old intel_gvt_load/restore_render_mmio(). This function can be further optimized for vGPU to vGPU switching. To support individual ring switch, we track the owner who occupy each ring. When another VM or host request a ring we do the mmio context switching. Otherwise no need to switch the ring. This optimization is very useful if only one guest has plenty of workloads and the host is mostly idle. The best case is no mmio switching will happen. v2: o fix missing ring switch issue. (chuanxiao) o support individual ring switch. Signed-off-by: Changbin Du <changbin.du@intel.com> Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: refactor function intel_vgpu_submit_execlistChangbin Du1-33/+23
The function intel_vgpu_submit_execlist could be more simpler. It actually does: 1) validate the submission. The first context must be valid, and all two must be privilege_access. 2) submit valid contexts. The first one need emulate schedule_in. We do not need a bitmap, valid desc copy valid_desc. Local variable emulate_schedule_in also can be optimized out. v2: dump desc content in err msg (Zhi Wang) Signed-off-by: Changbin Du <changbin.du@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: rewrite the trace gvt:gvt_command using trace style approachChangbin Du2-96/+32
The gvt:gvt_command trace involve unnecessary overhead even this trace is not enabled. We need improve it. The kernel trace infrastructure provide a full api to define a trace event. We should leverage them if possible. And one important thing is that a trace point should store raw data but not format string. This patch include two part work: 1) Refactor the gvt_command trace definition, including: o only store raw trace data. o use __dynamic_array() to declare a variable size buffer. o use __print_array() to format raw cmd data. o rename vm_id as vgpu_id. 2) Improve the trace invoking, including: o remove the cycles calculation for handler. We can get this data by any perf tool. o do not make a backup for raw cmd data which just doesn't make sense. With this patch, this trace has no overhead if it is not enabled. And we are trace style now. The final output example: gvt workload 0-211 [000] ...1 120.555964: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e880, raw cmd {0x4000000} gvt workload 0-211 [000] ...1 120.556014: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e884, raw cmd {0x7a000004,0x1004000,0xe1511018,0x0,0x7d,0x0} gvt workload 0-211 [000] ...1 120.556062: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e89c, raw cmd {0x7a000004,0x140000,0x0,0x0,0x0,0x0} gvt workload 0-211 [000] ...1 120.556110: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e8b4, raw cmd {0x10400002,0xe1511018,0x0,0x7d} Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/amdgpu/gfx: consolidate mqd buffer setup codeAlex Deucher4-132/+74
It was duplicated across multiple generations. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-08drm/amdgpu/gfx: move mec parameter setup into sw_initAlex Deucher3-47/+47
This will allow us to share more mec code. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-08drm/amdgpu/gfx: move more common KIQ code to amdgpu_gfx.cAlex Deucher4-211/+122
Lots more common stuff. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-08drm/amdgpu: move mec queue helpers to amdgpu_gfx.hAlex Deucher6-39/+40
They are gfx related, not general helpers. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-08drm/amdgpu/gfx9: remove spurious line in kiq setupAlex Deucher1-1/+0
This overrode what queue was actually assigned for kiq. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-08drm/amdgpu/gfx8: whitespace changeAlex Deucher1-1/+2
Make it consistent. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-07drm/amdgpu/gfx9: Raven has two MECsAlex Deucher1-0/+1
This was missed when Andres' queue patches were rebased. Fixes: 42794b27 (drm/amdgpu: take ownership of per-pipe configuration v3) Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-07drm/amdgpu: move gfx_v*_0_compute_queue_acquire to common codeAlex Deucher5-114/+42
Same function was duplicated in all gfx IP files. Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-07drm/amdgpu: fix mec queue policy on single MEC asicsAlex Deucher3-9/+27
Fixes hangs on single MEC asics. Fixes: 2ed286fb434 (drm/amdgpu: new queue policy, take first 2 queues of each pipe v2) Reviewed-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-07drm/pl111: Fix offset calculation for the primary plane.Eric Anholt1-13/+2
If src_x/y were nonzero, we failed to shift them down by 16 to get the pixel offset. The recent CMA helper function gets it right. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111") Reported-by: Mircea Carausu <mircea.carausu@broadcom.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170603015733.13266-1-eric@anholt.net Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-06-07drm/atmel-hlcdc: Fix panel registrationBoris Brezillon1-2/+0
Attach the panel-bridge created by drm_panel_bridge_add() to the parallel RGB encoder. Fixes: 96160a8071b2 ("drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.") Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496748866-17165-1-git-send-email-boris.brezillon@free-electrons.com
2017-06-07drm/bridge: Build the panel wrapper in drm_kms_helperMaarten Lankhorst1-1/+1
This fixes the following depmod error when building drm as a module: depmod: ERROR: Found 6 modules in dependency cycles! depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Tested-by: Lofstedt, Marta <marta.lofstedt@intel.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/3fd262cf-1db6-4335-320c-af92f9014502@linux.intel.com
2017-06-07drm/i915: Unify GT* and GT3 definitionsRodrigo Vivi1-30/+27
This patch clean up a bit the platform definition block in a way to avoid duplications and to let clear that GT3 for the current platform only have the extra Media engine (BSD2). v2: Kabylake IS_KABYLAKE as Anusha noticed. v3: Avoid EXTRA_ENGINE_MASK and list rings out on GT3 to make it more clear. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496765166-7068-1-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915: Remove unnecessary PORT3 definition.Rodrigo Vivi1-4/+2
Let's be picky and just use PICK directly. So we can extend this later without creating a new PORT_X por every new number of ports we have to handle. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496700722-13755-1-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Also need power well sanitize.Rodrigo Vivi1-2/+1
The workaround added in commit c6782b76d31a ("drm/i915/gen9: Reset secondary power well equests left on by DMC/KVMR") needs to be applied on Cannonlake as well. So let's assume any platform using this power well setup will also need and let's just go ahead and remove if condition. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-11-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Add power wells for CNLVille Syrjälä2-4/+137
CNL power wells are very similar to SKL, with the exception that the misc IO well has been split into separate AUX IO wells. Not sure if DMC is supposed to manage the AUX wells for us or not. Let's assume so for now. v2: DDI A power well wants DDI A domains, not DDI B domains v3: s/BIT/BIT_ULL and add proper Aux IO domains. (Rodrigo) v4: Remove PW_DDI_E. Not supported on Current CNL SKUs. (Rodrigo). v5: Removed DDI_E_IO_DOMAINS and moved PORT_DDI_E_IO to DDI_A_IO for the same reasons as v4 when we found out that current CNL SKUs don't have the full port E split. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-10-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/gen10: Set value of Indirect Context Offset for gen10Michel Thierry1-0/+5
Indirect Context Offset Pointer has changed for Cannonlake. INDIRECT_CTX_OFFSET[15:6] valid value for CNL is 19h per Spec. v2: rebased to intel_lr_indirect_ctx_offset v3: Commit message added per Tvrtko request. Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-9-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Cannonlake has same MOCS table than Skylake.Rodrigo Vivi1-1/+1
All registers and default configuration are the same for Skylake and Cannonlake. v2: Don't apply Wa for platforms without MOCS. (Paulo) v3: Removed WaDisableSkipCaching that Joonas noticed that according to spec it is not applicable to CNL. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-8-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Configure EU slice power gating.Rodrigo Vivi1-4/+3
Cannonlake also supports slice power gating on devices with more than one slice as SKL. Let's assume that this is the same for SKL+ and exclude BXT only. v2: Also remove KBL. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-7-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Cannonlake has 4 planes (3 sprites) per pipeJames Irwin1-1/+1
Issue: VIZ-4525 Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: James Irwin <james.irwin@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-6-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: add IS_CNL_REVID macroPaulo Zanoni1-0/+6
We're going to use it in the next commits. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-5-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Add Cannonlake PCI IDs for U-skus.Rodrigo Vivi1-0/+1
Platform enabling and its power-on are organized in different skus (U x Y x S x H, etc). So instead of organizing it in GT1 x GT2 x GT3 let's also use the platform sku. This is also the new Spec style what makes the review much more easy and straightforward. v2: Really include the PCI IDs to the picidlist[]; v3: Remove PCI IDs not present in spec. v4: Rebase. Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-3-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Cannonlake uses CNP PCH.Rodrigo Vivi1-0/+4
Avoid warning when CNP is detected with CNL. Also let's force it on the virtual detection. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-2-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/i915/cnl: Introduce Cannonlake platform defition.Rodrigo Vivi3-0/+12
Cannonlake is a Intel® Processor containing Intel® HD Graphics following Kabylake. It is Gen10. Let's start by adding the platform definition based on previous platforms but yet as alpha_support. On following patches we will start adding PCI IDs and the platform specific changes. CNL has an increased DDB size as Damien had previously noticed and provided a separated patch that got squashed here. v2: Squash DDB size here per Ander request. Credits-to: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-1-git-send-email-rodrigo.vivi@intel.com
2017-06-07drm/meson: Fix driver bind when only CVBS is availableNeil Armstrong1-5/+15
While introducing HDMI support, component matching on connectors node were bypassed since no driver would actually bind on the DT node. But when only a CVBS connector is present, only a single node is found in the graph, but ignored and a NULL match table is given to the component code. This code permits bypassing the components framework by binding directly the DRM driver when no components needs to be loaded. Fixes: a41e82e6c457 ("drm/meson: Add support for components") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com
2017-06-07drm/i915: Fix 90/270 rotated coordinates for FBCVille Syrjälä1-12/+7
The clipped src coordinates have already been rotated by 270 degrees for when the plane rotation is 90/270 degrees, hence the FBC code should no longer swap the width and height. Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Restore has_fbc=1 for ILK-MVille Syrjälä1-1/+1
Restore the lost has_fbc flag for mobile ILK. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Workaround VLV/CHV DSI scanline counter hardware failVille Syrjälä2-0/+30
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: stable@vger.kernel.org Cc: Jonas Aaberg <cja@gmx.net> Tested-by: Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Fix logical inversion for gen4 quirkingChris Wilson1-1/+1
The assertion that we want to make before disabling the pin of the pages for the unknown swizzling quirk is that the quirk is indeed active, and that the quirk is disabled before we do apply it to the pages. Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk") Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionallyChris Wilson1-1/+2
Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") added the restoration of the invalidation routine after the GuC was disabled, but missed that the GuC was unconditionally disabled when not used. This then overwrites the invalidate routine for the older chipsets, causing havoc and breaking resume as the most obvious victim. We place the guard inside i915_ggtt_disable_guc() to be backport friendly (the bug was introduced into v4.11) but it would be preferred to be in more control over when this was guard (i.e. do not try and teardown the data structures before we have enabled them). That should be true with the reorganisation of the guc loaders. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com> (cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.Maarten Lankhorst1-0/+9
On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic check time (v4)") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Prevent the system suspend complete optimizationImre Deak1-0/+9
Since commit bac2a909a096c9110525c18cbb8ce73c660d5f71 Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Date: Wed Jan 21 02:17:42 2015 +0100 PCI / PM: Avoid resuming PCI devices during system suspend PCI devices will default to allowing the system suspend complete optimization where devices are not woken up during system suspend if they were already runtime suspended. This however breaks the i915/HDA drivers for two reasons: - The i915 driver has system suspend specific steps that it needs to run, that bring the device to a different state than its runtime suspended state. - The HDA driver's suspend handler requires power that it will request from the i915 driver's power domain handler. This in turn requires the i915 driver to runtime resume itself, but this won't be possible if the suspend complete optimization is in effect: in this case the i915 runtime PM is disabled and trying to get an RPM reference returns -EACCESS. Solve this by requiring the PCI/PM core to resume the device during system suspend which in effect disables the suspend complete optimization. Regardless of the above commit the optimization stayed disabled for DRM devices until commit d14d2a8453d650bea32a1c5271af1458cd283a0f Author: Lukas Wunner <lukas@wunner.de> Date: Wed Jun 8 12:49:29 2016 +0200 drm: Remove dev_pm_ops from drm_class so this patch is in practice a fix for this commit. Another reason for the bug staying hidden for so long is that the optimization for a device is disabled if it's disabled for any of its children devices. i915 may have a backlight device as its child which doesn't support runtime PM and so doesn't allow the optimization either. So if this backlight device got registered the bug stayed hidden. Credits to Marta, Tomi and David who enabled pstore logging, that caught one instance of this issue across a suspend/ resume-to-ram and Ville who rememberd that the optimization was enabled for some devices at one point. The first WARN triggered by the problem: [ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746448] pm_runtime_get_sync() failed: -13 [ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_ numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915] [ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1 [ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017 [ 6250.746521] Workqueue: events_unbound async_run_entry_fn [ 6250.746525] Call Trace: [ 6250.746530] dump_stack+0x67/0x92 [ 6250.746536] __warn+0xc6/0xe0 [ 6250.746542] ? pci_restore_standard_config+0x40/0x40 [ 6250.746546] warn_slowpath_fmt+0x46/0x50 [ 6250.746553] ? __pm_runtime_resume+0x56/0x80 [ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746610] intel_display_power_get+0x1b/0x40 [i915] [ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915] [ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core] [ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel] [ 6250.746667] pci_pm_runtime_resume+0x76/0xa0 [ 6250.746672] __rpm_callback+0xb4/0x1f0 [ 6250.746677] ? pci_restore_standard_config+0x40/0x40 [ 6250.746682] rpm_callback+0x1f/0x80 [ 6250.746686] ? pci_restore_standard_config+0x40/0x40 [ 6250.746690] rpm_resume+0x4ba/0x740 [ 6250.746698] __pm_runtime_resume+0x49/0x80 [ 6250.746703] pci_pm_suspend+0x57/0x140 [ 6250.746709] dpm_run_callback+0x6f/0x330 [ 6250.746713] ? pci_pm_freeze+0xe0/0xe0 [ 6250.746718] __device_suspend+0xf9/0x370 [ 6250.746724] ? dpm_watchdog_set+0x60/0x60 [ 6250.746730] async_suspend+0x1a/0x90 [ 6250.746735] async_run_entry_fn+0x34/0x160 [ 6250.746741] process_one_work+0x1f2/0x6d0 [ 6250.746749] worker_thread+0x49/0x4a0 [ 6250.746755] kthread+0x107/0x140 [ 6250.746759] ? process_one_work+0x6d0/0x6d0 [ 6250.746763] ? kthread_create_on_node+0x40/0x40 [ 6250.746768] ret_from_fork+0x2e/0x40 [ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]--- v2: - Use the new pci_dev->needs_resume flag, to avoid any overhead during the ->pm_prepare hook. (Rafael) v3: - Update commit message to reference the actual regressing commit. (Lukas) v4: - Rebase on v4 of patch 1/2. Fixes: d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class") References: https://bugs.freedesktop.org/show_bug.cgi?id=100378 References: https://bugs.freedesktop.org/show_bug.cgi?id=100770 Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Marta Lofstedt <marta.lofstedt@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag Cc: <stable@vger.kernel.org> # v4.10.x Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com (cherry picked from commit adfdf85d795f4d4f487b61ee0b169d64c6e19081) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915/psr: disable psr2 for resolution greater than 32X20Nagaraju, Vathsala1-2/+3
psr1 is also disabled for panel resolution greater than 32X20. Added psr2 check to disable only for psr2 panels having resolution greater than 32X20. issue was introduced by commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba" commit message: "PSR2 is restricted to work with panel resolutions upto 3200x2000, move the check to intel_psr_match_conditions and fully block psr." v2: (Rodrigo) Add previous commit details which introduced the issue Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com (cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Hold a wakeref for probing the ring registersChris Wilson1-1/+17
Allow intel_engine_is_idle() to be called outside of the GT wakeref by acquiring the device runtime pm for ourselves. This allows the function to act as check after we assume the engine is idle and we release the GT wakeref held whilst we have requests. At the moment, we do not call it outside of an awake context but taking the wakeref as required makes it more convenient to use for quick debugging in future. [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit a091d4ee931b16ce4fef945d39a20b851a7e17b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Short-circuit i915_gem_wait_for_idle() if already idleChris Wilson1-0/+4
If the device is asleep (no GT wakeref), we know the GPU is already idle. If we add an early return, we can avoid touching registers and checking hw state outside of the assumed GT wakelock. This prevents causing such errors whilst debugging: [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Disable decoupled MMIOKai Chen1-1/+0
The decoupled MMIO feature doesn't work as intended by HW team. Enabling it with forcewake will only make debugging efforts more difficult, so let's disable it. Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang <zhe1.wang@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Kai Chen <kai.chen@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com (cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915/guc: Remove stale comment for q_failMichal Wajdeczko1-2/+0
This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/vmwgfx: Bump driver minor and dateThomas Hellstrom1-2/+2
While the atomic modesetting capability is signaled also elsewhere, also reflect it by a driver minor bump. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 16:42:52 +0300