summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2015-05-10Merge tag 'drm-intel-fixes-2015-05-08' of ↵Dave Airlie3-9/+29
git://anongit.freedesktop.org/drm-intel into drm-fixes misc i915 fixes. * tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it
2015-05-10drm: Zero out invalid vblank timestamp in drm_update_vblank_count.Mario Kleiner1-5/+4
Since commit 844b03f27739135fe1fed2fef06da0ffc4c7a081 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-05-08drm/tegra: Don't use vblank_disable_immediate on incapable driver.Mario Kleiner1-1/+0
Tegra would not only need a hardware vblank counter that increments at leading edge of vblank, but also support for instantaneous high precision vblank timestamp queries, ie. a proper implementation of dev->driver->get_vblank_timestamp(). Without these, there can be off-by-one errors during vblank disable/enable if the scanout is inside vblank at en/disable time, and additionally clients will never see any useable vblank timestamps when querying via drmWaitVblank ioctl. This would negatively affect swap scheduling under X11 and Wayland. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-05-08Merge tag 'drm-amdkfd-fixes-2015-05-07' of ↵Dave Airlie2-4/+7
git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Add missing initialization of SDMA vm register when creating an SDMA queue - Don't report local memory size, as we don't support local memory allocation yet. - Allow to unregister process with exisiting queues. Until now we blocked it with BUG_ON, which was also an error by itself. * tag 'drm-amdkfd-fixes-2015-05-07' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues
2015-05-07drm/radeon: stop trying to suspend UVD sessionsChristian König2-21/+19
Saving the current UVD state on suspend and restoring it on resume just doesn't work reliable. Just close cleanup all sessions on suspend. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/radeon: more strictly validate the UVD codecChristian König1-2/+31
MPEG 2/4 are only supported since UVD3. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/radeon: make UVD handle checking more strictChristian König1-29/+43
Invalid messages can crash the hw otherwise. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/radeon: make VCE handle check more strictChristian König1-17/+48
Invalid handles can crash the hw. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/radeon: fix userptr lockupChristian König1-0/+3
We shouldn't try to reserve and wait for a BO that isn't bound. Otherwise we can run into a deadlock if we have a fault during binding the BO. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/radeon: fix userptr BO unpin bug v3monk.liu1-5/+3
Fixing a memory leak with userptrs. v2: clean up the loop, use an iterator instead v3: remove unused variable Signed-off-by: monk.liu <monk.liu@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/amdkfd: Initialize sdma vm when creating sdma queueXihan Zhang1-0/+2
This patch fixes a bug where sdma vm wasn't initialized when an sdma queue was created in HWS mode. This caused GPUVM faults to appear on dmesg and it is one of the causes that SDMA queues are not working. Signed-off-by: Xihan Zhang <xihan.zhang@amd.com> Reviewed-by: Ben Goz <ben.goz@amd.comt> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/amdkfd: Don't report local memory sizeOded Gabbay1-2/+2
This patch sets the local memory size that is reported to userspace to 0. This is done to make sure that userspace won't try to allocate local memory for HSA. As long as amdkfd doesn't support allocating local memory for HSA, we need this patch. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/amdkfd: allow unregister process with queuesOded Gabbay1-2/+3
Sometimes we might unregister process that have queues, because we couldn't preempt the queues. Until now we blocked it with BUG_ON but instead just print it as debug. Reviewed-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-07drm/i915: Drop PIPE-A quirk for 945GSE HP MiniChris Wilson1-3/+0
Since the introduction of BIOS fb preservation, circa 3.17, we began encountering a failure during boot when trying to use force-detect before GEM was initialised. That bug is from commit 7fad798e16fecddd41c6a91728a09f0b9507e40c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jul 4 17:51:47 2012 +0200 drm/i915: ensure the force pipe A quirk is actually followed but investigation of the affected machine revealed that it was using a PIPE-A quirk even though it was a 945GSE and the quirk is only supposed to be used to workaround a hardware issue on 830/845. That quirk was added for this HP Mini in commit 6b93afc564a5e74b0eaaa46c95f557449951b3b9 Author: Bryce Harrington <bryce@bryceharrington.org> Date: Wed May 27 03:40:52 2009 -0700 add pipe a force quirk for Dell mini in order to workaround an issue with the BIOS behaving strangely during lid-close. Since then we have a much larger hammer to thwart the BIOS after opening the lid and the PIPE-A quirk is no longer required. Reported-and-tested-by: Apostolos B. <barz621@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=21960 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87521 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-07drm/i915: Sink rate read should be saved in deca-kHzSonika Jindal1-1/+2
The sink rate read from supported link rate table is in KHz as per spec while in drm, the saved clock is in deca-KHz. So divide the link rate by 10 before storing. Reading of rates was added by: commit fc0f8e25318f ("drm/i915/skl: Read sink supported rates from edp panel") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-06drm/i915/dp: there is no audio on port AJani Nikula1-3/+3
The eDP port A register on PCH split platforms has a slightly different register layout from the other ports, with bit 6 being either alternate scrambler reset or reserved, depending on the generation. Our misinterpretation of the bit as audio has lead to warning. Fix this by not enabling audio on port A, since none of our platforms support audio on port A anyway. v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958 Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-05drm/i915: Add missing MacBook Pro models with dual channel LVDSLukas Wunner1-1/+17
Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz) as a BTO option, both versions used dual channel LVDS even though the smaller one would have fit into a single channel. Notes: Bug report showing that the MacBookPro8,2 with 1440x900 uses dual channel LVDS (this lead to it being hardcoded in intel_lvds.c by Daniel Vetter with commit 618563e3945b9d0864154bab3c607865b557cecc): https://bugzilla.kernel.org/show_bug.cgi?id=42842 If i915.lvds_channel_mode=2 is missing even though the machine needs it, every other vertical line is white and consequently, only the left half of the screen is visible (verified by myself on a MacBookPro9,1). Forum posting concerning a MacBookPro6,2 with 1440x900, author is using i915.lvds_channel_mode=2 on the kernel command line, proving that the machine uses dual channels: https://bbs.archlinux.org/viewtopic.php?id=185770 Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all MacBook Pro "A1286" models, and that model number encompasses the MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's driven with dual channel LVDS: http://www.ebay.com/itm/-/400690878560 http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286 http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones with i915 graphics and dual channel LVDS, so that list should be complete. And the 8,2 is already in intel_lvds.c. Possible motivation to use dual channel LVDS even on the 1440x900 models: Reduce the number of different parts, i.e. use identical logic boards and display cabling on both versions and the only differing component is the panel. Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org [Jani: included notes in the commit message for posterity] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-05drm/i915: Assume dual channel LVDS if pixel clock necessitates itLukas Wunner1-1/+7
Single channel LVDS maxes out at 112 MHz, anything above must be dual channel. This avoids the need to specify i915.lvds_channel_mode=2 on all 17" MacBook Pro models with i915 graphics since they had 1920x1200 (193 MHz), plus those 15" pre-retina models which had a resolution of 1680x1050 (119 MHz) as a BTO option. Source for 112 MHz limit of single channel LVDS is section 2.3 of: https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the resolution necessitates it, suggested by Jani Nikula. v3: Fix typo, thanks Joonas Lahtinen. v4: Split commit in two, suggested by Ville Syrjälä. Signed-off-by: Lukas Wunner <lukas@wunner.de> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org [Jani: included spec reference into the commit message] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-05drm/radeon: don't setup audio on asics that don't support itAlex Deucher1-0/+4
bug: https://bugzilla.kernel.org/show_bug.cgi?id=97701 Reported-by: Mikael Pettersson <mikpelinux@gmail.com> Tested-by: Mikael Pettersson <mikpelinux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-05-04drm/radeon: disable semaphores for UVD V1 (v2)Christian König5-13/+39
Hardware doesn't seem to work correctly, just block userspace in this case. v2: add missing defines Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320 Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-04Merge tag 'drm-intel-fixes-2015-04-30' of ↵Dave Airlie2-0/+10
git://anongit.freedesktop.org/drm-intel into drm-fixes Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
2015-05-04Merge branch 'drm-next0420' of ↵Dave Airlie1-4/+5
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
2015-04-28drm/i915/chv: Implement WaDisableShadowRegForCpdDeepak S2-0/+10
This WA is avoid problem between shadow vs wake FIFO unload problem during CPD/RC6 transactions on CHV. v2: Define individual bits GTFIFOCTL (Ville) v3: move WA to uncore_early_sanitize (ville) Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: fixed some whitespace issues while applying] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-27drm/radeon: fix userptr return value checking (v2)Christian König1-5/+5
Otherwise we print false warning from time to time. v2: agd5f: rebase Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-27drm/radeon: check new address before removing old oneChristian König1-14/+17
Otherwise the change isn't atomic. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-27drm/radeon: reset BOs address after clearing it.Christian König1-0/+2
Otherwise it is possible that we will have page table corruption if we change a BOs address multiple times. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-27drm/radeon: fix lockup when BOs aren't part of the VM on releaseChristian König1-1/+2
If we unmap BOs before releasing them them the intervall tree locks up because we try to remove an entry not inside the tree. Based on a patch from Michel Dänzer. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-27drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5Alex Deucher1-0/+1
Seems to have problems with high mclks. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon: adjust pll when audio is not enabledAlex Deucher1-0/+3
Fixes display problems with some monitors when audio is not enabled. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89505 https://bugzilla.kernel.org/show_bug.cgi?id=94171 Plus several reports on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon: only enable audio streams if the monitor supports itAlex Deucher2-12/+21
Selectively enable which packets we send based on monitor caps. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon: only mark audio as connected if the monitor supports it (v3)Alex Deucher2-14/+21
Otherwise the driver may try and send audio which may confuse the monitor. v2: set pin to NULL if no audio v3: avoid crash with analog encoders Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon/audio: don't enable packets until the endAlex Deucher1-13/+17
Don't enable the audio and avi infoframes and audio stream until all the state is set up. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon: drop dce6_dp_enableAlex Deucher3-28/+2
It's mostly duplicated with evergreen_dp_enable. This is a prerequisite for fix implemented in another patch. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon: fix ordering of AVI packet setupAlex Deucher2-10/+11
Set the line first, then enable the stream. May fix pink line problems on some displays. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-04-27drm/radeon: Use drm_calloc_ab for CS relocsMichel Dänzer1-2/+2
The number of relocs is passed in by userspace and can be large. It has been observed to cause kcalloc failures in the wild. Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-27Merge tag 'drm-intel-next-fixes-2015-04-25' of ↵Dave Airlie5-14/+95
git://anongit.freedesktop.org/drm-intel into drm-fixes three fixes for i915. * tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
2015-04-24drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT regImre Deak1-2/+2
Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across suspend/resume, so fix this. This was introduced in commit ddeea5b0c36f3665446518c609be91f9336ef674 Author: Imre Deak <imre.deak@intel.com> Date: Mon May 5 15:19:56 2014 +0300 drm/i915: vlv: add runtime PM support I noticed this only by reading the code. To my knowledge it shouldn't cause any real problems at the moment, since the power well backing this register remains on across a runtime s/r. This may change once system-wide s0ix functionality is enabled in the kernel. v2: - resend after a missing git add -u :/ Cc: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-23drm/i915: Workaround to avoid lite restore with HEAD==TAILMichel Thierry2-2/+36
WaIdleLiteRestore is an execlists-only workaround, and requires the driver to ensure that any context always has HEAD!=TAIL when attempting lite restore. Add two extra MI_NOOP instructions at the end of each request, but keep the requests tail pointing before the MI_NOOPs. We may not need to executed them, and this is why request->tail is sampled before adding these extra instructions. If we submit a context to the ELSP which has previously been submitted, move the tail pointer past the MI_NOOPs. This ensures HEAD!=TAIL. v2: Move overallocation to gen8_emit_request, and added note about sampling request->tail in commit message (Chris). v3: Remove redundant request->tail assignment in __i915_add_request, in lrc mode this is already set in execlists_context_queue. Do not add wa implementation details inside gem (Chris). v4: Apply the wa whenever the req has been resubmitted and update comment (Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-23drm/i915: cope with large i2c transfersDmitry Torokhov2-10/+57
The hardware, according to the specs, is limited to 256 byte transfers, and current driver has no protections in case users attempt to do larger transfers. The code will just stomp over status register and mayhem ensues. Let's split larger transfers into digestable chunks. Doing this allows Atmel MXT driver on Pixel 1 function properly (it hasn't since commit 9d8dc3e529a19e427fd379118acd132520935c5d "Input: atmel_mxt_ts - implement T44 message handling" which tries to consume multiple touchscreen/touchpad reports in a single transaction). Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-21dma-buf: cleanup dma_buf_export() to make it easily extensibleSumit Semwal8-16/+62
At present, dma_buf_export() takes a series of parameters, which makes it difficult to add any new parameters for exporters, if required. Make it simpler by moving all these parameters into a struct, and pass the struct * as parameter to dma_buf_export(). While at it, unite dma_buf_export_named() with dma_buf_export(), and change all callers accordingly. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2015-04-21Merge tag 'fbdev-4.1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Small fixes and improvements to various fbdev drivers" * tag 'fbdev-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (24 commits) omapdss: extend pm notifier to handle hibernation OMAPDSS: Correct video ports description file path in DT binding doc OMAPDSS: disable VT switch fbdev: sh_mobile_lcdc: Fix destruction of uninitialized mutex video: fbdev: sh_mobile_lcdcfb: Fix ROP3 sysfs attribute parsing fbdev: pm3fb: cleanup some confusing indenting hyperv: hyperv_fb: match wait_for_completion_timeout return type video: fbdev: use msecs_to_jiffies for time conversions fbdev: via/via_clock: fix sparse warning video: fbdev: make of_device_id array const fbdev: sm501fb: use memset_io OMAPDSS: workaround for MFLAG + NV12 issue OMAPDSS: Add support for MFLAG OMAPDSS: setup default fifo thresholds OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG OMAPDSS: DISPC: fix div by zero issue in overlay scaling OMAPDSS: DISPC: change sync_pclk_edge default value OMAPDSS: change signal_level & signal_edge enum values OMAPDSS: DISPC: explicit handling for sync and de levels OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES ...
2015-04-20Merge Linus master into drm-nextDave Airlie10-27/+15
The merge is clean, but the arm build fails afterwards, due to API changes in the regulator tree. I've included the patch into the merge to fix the build. Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-04-20drm/rockchip: fix error check when getting irqHeiko Stuebner1-4/+5
platform_get_irq() can return negative error values and we already test for these. Therefore the variable holding this value should be signed to not loose possible error values. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-By: Daniel Kurtz <djkurtz@chromium.org>
2015-04-18Merge tag 'devicetree-for-linus' of ↵Linus Torvalds2-21/+5
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Here are the devicetree changes queued up for v4.1. Nothing really exciting here. Rob has another few commits for big-endian attached UARTs, but those will be sent in a separate merge request since they haven't been as thoroughly tested as this batch. Here are the highlights: - lots of unittest cleanup from Frank Rowand - bugfixes and updates to the of_graph code - tighten up of_get_mac_address() code - documentation updates" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/unittest: Fix of_platform_depopulate test case of/unittest: early return from test skips tests of/unittest: breadcrumbs to reduce pain of future maintainers of/unittest: reduce checkpatch noise - line after declarations of/unittest: typo in error string of/unittest: add const where needed of_net: factor out repetitive code from of_get_mac_address() drivers/of: Add empty ranges quirk for PA-Semi of: Allow selection of OF_DYNAMIC and OF_OVERLAY if OF_UNITTEST of: Empty node & property flag accessors when !OF of: Explicitly include linux/types.h in of_graph.h dt-bindings: brcm: rationalize Broadcom documentation naming of/unittest: replace 'selftest' with 'unittest' Documentation: rename of_selftest.txt to of_unittest.txt Documentation: update the of_selftest.txt dt: OF_UNITTEST make dependency broken MAINTAINERS: Pantelis Antoniou device tree overlay maintainer of: Add of_graph_get_port_by_id function of: Add for_each_endpoint_of_node helper macro of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
2015-04-17kernel.h: implement DIV_ROUND_CLOSEST_ULLJavi Merino2-3/+1
We have grown a number of different implementations of DIV_ROUND_CLOSEST_ULL throughout the kernel. Move the i915 one to kernel.h so that it can be reused. Signed-off-by: Javi Merino <javi.merino@arm.com> Reviewed-by: Jeff Epler <jepler@unpythonic.net> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Alex Elder <elder@linaro.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Javi Merino <javi.merino@arm.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16Merge tag 'drm-intel-next-fixes-2015-04-15' of ↵Dave Airlie13-77/+91
git://anongit.freedesktop.org/drm-intel into drm-next Misc i915 fixes. * tag 'drm-intel-next-fixes-2015-04-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Dont enable CS_PARSER_ERROR interrupts at all drm/i915: Move drm_framebuffer_unreference out of struct_mutex for takeover drm/i915: Allocate connector state together with the connectors drm/i915/chv: Remove DPIO force latency causing interpair skew issue drm/i915: Don't cancel DRRS worker synchronously for flush/invalidate drm/i915: Fix locking in DRRS flush/invalidate hooks
2015-04-16Merge tag 'topic/drm-misc-2015-04-15' of ↵Dave Airlie31-299/+170
git://anongit.freedesktop.org/drm-intel into drm-next One more drm-misch pull for 4.1 with mostly simple stuff and boring refactoring. Even the cursor fix from Matt is just to make a really anal igt happy. * tag 'topic/drm-misc-2015-04-15' of git://anongit.freedesktop.org/drm-intel: drm: fix trivial typo mistake drm: Make integer overflow checking cover universal cursor updates (v2) drm: make crtc/encoder/connector/plane helper_private a const pointer drm/armada: constify struct drm_encoder_helper_funcs pointer drm/radeon: constify more struct drm_*_helper funcs pointers drm/edid: add #defines for ELD versions drm/atomic: Add for_each_{connector,crtc,plane}_in_state helper macros drm: Use kref_put_mutex in drm_gem_object_unreference_unlocked drm/drm: constify all struct drm_*_helper funcs pointers drm/qxl: constify all struct drm_*_helper funcs pointers drm/nouveau: constify all struct drm_*_helper funcs pointers drm/radeon: constify all struct drm_*_helper funcs pointers drm/gma500: constify all struct drm_*_helper funcs pointers drm/mgag200: constify all struct drm_*_helper funcs pointers drm/exynos: constify all struct drm_*_helper funcs pointers drm: Fix some typos
2015-04-16Merge branch 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm ↵Dave Airlie3-38/+42
into drm-next This set of patches adjust the setup of the HDMI CTS/N values for audio support to be compliant with the work-around given in the iMX6 errata documentation as part of the preparation for integrating audio support for this driver, and also update the HDMI phy configuration for Rockchip devices to improve the HDMI eye pattern. * 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: rockchip/dw_hdmi-rockchip: improve for HDMI electrical test drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver drm: bridge/dw_hdmi: fixed codec style drm: bridge/dw_hdmi: adjust n/cts setting order drm: bridge/dw_hdmi: protect n/cts setting with a mutex drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts() Conflicts: drivers/gpu/drm/imx/dw_hdmi-imx.c
2015-04-16Merge branch 'drm-next-4.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie5-29/+87
into drm-next Some final bits for 4.1. Some fixes for userptrs and allow a new packet for VCE to enable some new features in mesa. * 'drm-next-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: allow creating overlapping userptrs drm/radeon: add userptr config option drm/radeon: add video usability info support for VCE
2015-04-14Merge tag 'trace-v4.1' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Some clean ups and small fixes, but the biggest change is the addition of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints. Tracepoints have helper functions for the TP_printk() called __print_symbolic() and __print_flags() that lets a numeric number be displayed as a a human comprehensible text. What is placed in the TP_printk() is also shown in the tracepoint format file such that user space tools like perf and trace-cmd can parse the binary data and express the values too. Unfortunately, the way the TRACE_EVENT() macro works, anything placed in the TP_printk() will be shown pretty much exactly as is. The problem arises when enums are used. That's because unlike macros, enums will not be changed into their values by the C pre-processor. Thus, the enum string is exported to the format file, and this makes it useless for user space tools. The TRACE_DEFINE_ENUM() solves this by converting the enum strings in the TP_printk() format into their number, and that is what is shown to user space. For example, the tracepoint tlb_flush currently has this in its format file: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) After adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); Its format file will contain this: __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" })" * tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Add enum_map file to show enums that have been mapped writeback: Export enums used by tracepoint to user space v4l: Export enums used by tracepoints to user space SUNRPC: Export enums in tracepoints to user space mm: tracing: Export enums in tracepoints to user space irq/tracing: Export enums in tracepoints to user space f2fs: Export the enums in the tracepoints to userspace net/9p/tracing: Export enums in tracepoints to userspace x86/tlb/trace: Export enums in used by tlb_flush tracepoint tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM() tracing: Allow for modules to convert their enums to values tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation tracing: Give system name a pointer brcmsmac: Move each system tracepoints to their own header iwlwifi: Move each system tracepoints to their own header mac80211: Move message tracepoints to their own header tracing: Add TRACE_SYSTEM_VAR to xhci-hcd tracing: Add TRACE_SYSTEM_VAR to kvm-s390 tracing: Add TRACE_SYSTEM_VAR to intel-sst ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 04:33:05 +0300