| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some of the IOCTL messages can be called for different GPUs and it might
not be obvious which one called them from a problem. Using the drm_*()
macros the correct device will be shown in the messages.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250715212420.2254925-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use kmalloc_array() instead of kmalloc() with multiplication.
kmalloc_array() is a safer way because of its multiply overflow check.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The error log is supposed to be gaurded under if failure condition.
Fixes: faab5ea08367 ("drm/amdgpu: Check vcn sram load return value")
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only
be used for DP. Make sure to initialize the correct amount of PLLs
in DC for these DCE versions and use PLL0 only for DP.
Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at
initialization as opposed to DCE 6.1 and 7.x which use a different
clock source for DFS.
The following functions were used as reference from the old
radeon driver implementation of DCE 6.x:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr
with the dce_clk_mgr, causing incorrect behaviour on DCE6.
Fix it by removing the extra dce_clk_mgr_construct.
Fixes: 62eab49faae7 ("drm/amd/display: hide VGH asic specific structs")
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move amdgpu_device_health_check into amdgpu_device_gpu_recover to
ensure that if the device is present can be checked before reset
The reason is:
1.During the dpc event, the device where the dpc event occurs is not
present on the bus
2.When both dpc event and ATHUB event occur simultaneously,the dpc thread
holds the reset domain lock when detecting error,and the gpu recover thread
acquires the hive lock.The device is simultaneously in the states of
amdgpu_ras_in_recovery and occurs_dpc,so gpu recover thread will not go to
amdgpu_device_health_check.It waits for the reset domain lock held by the
dpc thread, but dpc thread has not released the reset domain lock.In the dpc
callback slot_reset,to obtain the hive lock, the hive lock is held by the
gpu recover thread at this time.So a deadlock occurred
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Try to ensure poison creation handle is completed in time
to set device rma value.
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the IPID register value for bad page threshold CPER according to
the latest definition.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The initial comment block before
amdgpu_fence_driver_guilty_force_completion() incorrectly used '/**' but
is not a kernel-doc comment, causing build warnings.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:742: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Kernel queue reset handling
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GPUs with multi-xcc have multiple MQDs per queue. This patch saves and
restores all the MQDs within the partition.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the SCLK limits have been set before S3 they will not
be restored. The limits are however cached in the driver and so
they can be restored by running a commit sequence during resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The power limit will be cached in smu->current_power_limit but
if the ASIC goes into S3 this value won't be restored.
Restore the value during SMU resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The variable `pm_suspend_target_state` is conditionally defined only when
`CONFIG_SUSPEND` is enabled (see `include/linux/suspend.h`). Directly
referencing it without guarding by `#ifdef CONFIG_SUSPEND` causes build
failures when suspend functionality is disabled (e.g., `CONFIG_SUSPEND=n`).
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously we tried to keep the HW specific PTE flags in each mapping,
but for CRIU that isn't sufficient any more since the original value is
needed for the checkpoint procedure.
So rework the whole handling, nuke the early mapping function, keep the
UAPI flags in each mapping instead of the HW flags and translate them to
the HW flags while filling in the PTEs.
Only tested on Navi 23 for now, so probably needs quite a bit of more
work.
v2: fix KFD and SVN handling
v3: one more SVN fix pointed out by Felix
v4: squash in gfx12 fix from David
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This driver, for the time being, assumes that the kernel page size is 4kB,
so it fails on loong64 and aarch64 with 16kB pages, and ppc64el with 64kB
pages.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250802024152.3021-1-Simon.Richter@hogyros.de
(cherry picked from commit 0521a868222ffe636bf202b6e9d29292c1e19c62)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The PF driver might be resumed just to configure VFs, but since
it is doing some asynchronous GuC reconfigurations after fresh
reset, we should wait until all pending works are completed.
This is especially important in case of LMEM provisioning, since
we also need to update the LMTT and send invalidation requests
to all GuCs, which are expected to be already in the VGT mode.
Fixes: 68ae022278a1 ("drm/xe/pf: Force GuC virtualization mode")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-3-michal.wajdeczko@intel.com
(cherry picked from commit c6c86441c465ea440dfb5039f1c26e629a6fd64c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We can't let restart worker run once device is removed, since other
data that it might want to access could be already released.
Explicitly disable worker as part of device cleanup action.
Fixes: a4d1c5d0b99b ("drm/xe/pf: Move VFs reprovisioning to worker")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-2-michal.wajdeczko@intel.com
(cherry picked from commit a424353937c24554bb242a6582ed8f018b4a411c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Doing devcoredump initializing before GT though look harmless, it leads
to problem during driver unbind. Because of this order, GT/Engine
release functions will be called before xe devcoredump release function
(xe_driver_devcoredump_fini) leading to the following kernel crash[1]
because the devcoredump functions might still use GT/Engine
datastructures after those are freed.
The following crash is observed while running the IGT
xe_wedged@wedged-at-any-timeout. The test forces a wedged state by
submitting a workload which hangs. Then does a unbind/rebind of the
driver to recover from the wedged state.
The hanged workload leads to a devcoredump. The following crash is
noticed when the devcoredump capture races with the driver unbind.
During driver unbind, the release function hw_engine_fini() will be
called which assigns NULL to hwe->gt. But the same data structure is
accessed during the coredump capture in the function
xe_engine_snapshot_print by reading snapshot->hwe->gt.
With this patch, we make sure the devcoredump is stopped before
deinitializing the core driver functions.
[1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: events_unbound xe_devcoredump_deferred_snap_work [xe]
RIP: 0010:xe_engine_snapshot_print+0x47/0x420 [xe]
Call Trace:
<TASK>
? drm_printf+0x64/0x90
__xe_devcoredump_read+0x23f/0x2d0 [xe]
? __pfx___drm_printfn_coredump+0x10/0x10
? __pfx___drm_puts_coredump+0x10/0x10
xe_devcoredump_deferred_snap_work+0x17a/0x190 [xe]
process_one_work+0x22e/0x6f0
worker_thread+0x1e8/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x11f/0x250
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
v2: Detailed commit description (Rodrigo)
v3: FIXME added (Rodrigo, Stuart)
Fixes: 4209d635a823 ("drm/xe: Remove devcoredump during driver release")
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731061300.14320-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250801052356.21885-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1fdc4c381ff765479d76ccf3134717c430c871b8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We already claim official support for SR-IOV PF/VF modes on PTL
and BMG platforms, but by default we start the Xe driver on those
platforms in non-virtualized mode (native) since we still have
max_vfs modparam set to disable creation of the VFs.
It's time to let the Xe driver support SR-IOV PF mode by default.
We were already testing this on our CI, which was relying on the
patch that was enabling it for CONFIG_DRM_XE_DEBUG used by our CI.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250722182618.30811-3-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a2b461bd6f3b36bded0a74178dec0e58e4714d3d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Extend WA 13012615864 to Graphics Versions 20.01,20.02,20.04
and 30.03.
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250731220143.72942-2-jonathan.cavitt@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix typo in comments:
souch -> such.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250721152818.1891212-1-hugo@hugovil.com
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250729054214.2264377-1-nichen@iscas.ac.cn
|
|
Fix bug in nt35560_set_brightness() which causes the function to
erroneously report an error. mipi_dsi_dcs_write() returns either a
negative value when an error occurred or a positive number of bytes
written when no error occurred. The buggy code reports an error under
either condition.
Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250731032343.1258366-2-me@brighamcampbell.com
|
|
HV101HD1-1E1 is a color active matrix TFT LCD module using amorphous
silicon TFT's (Thin Film Transistors) as an active switching devices. This
module has a 10.1 inch diagonally measured active area with HD resolutions
(1366 horizontal by 768 vertical pixel array).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250717135752.55958-3-clamor95@gmail.com
|
|
Use dev_err_probe() helper as directed by core driver model to handle
driver probe error. Use standard helper defined at drivers/base/core.c
to maintain code consistency.
Inspired by,
commit a787e5400a1ce ("driver core: add device probe log helper")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/aIJagJ/RnhSCtb2t@bhairav-test.ee.iitb.ac.in
|
|
There is a spelling mistake in the LEDS_BD2606MVV config. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724112358.142351-1-colin.i.king@gmail.com
|
|
Samsung AMS561RA01 is an AMOLED panel, using the Samsung S6E8AA5X01 MIPI
DSI controller. Implement a basic panel driver for such panels.
The driver also initializes a backlight device, which works by changing
the panel's gamma values and aid brightness levels appropriately, with
the help of look-up tables acquired from downstream kernel sources.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250721-panel-samsung-s6e8aa5x01-v5-2-1a315aba530b@disroot.org
|
|
Add support for the Olimex LCD-OLinuXino-5CTS, a 5-inch TFT LCD panel
with a mode operating at 33.3 MHz.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250702082230.1291953-2-paulk@sys-base.io
|
|
Parallel exec queues have an additional command streamer buffer which holds
a GGTT reference to data within context status. The GGTT references have to
be fixed after VF migration.
v2: Properly handle nop entry, verify if parsing goes ok
v3: Improve error/warn logging, add propagation of errors,
give names to magic offsets
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-9-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The WA buffer we use to capture context utilization contains GGTT
references. This means its instructions have to be either fixed or
re-emitted during VF post-migration recovery.
This patch adds re-emitting content of the utilization WA BB during
the recovery.
The way we write to vram requires scratch buffer to be used before
the whole block is memcopied. We are re-using a scratch buffer
introduced in earlier part of the recovery. This is not a performance
optimization, but a necessity to avoid creating dependencies between
locks.
v2: Notable rebase after "Prepare WA BB setup for more users" patch
v3: Added error propagation
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-8-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The commands within ring area allocated for a request may contain
references to GGTT. These references require update after VF
migration, in order to continue any preempted LRCs, or jobs which
were emitted to the ring but not sent to GuC yet.
This change calls the emit function again for all such jobs,
as part of post-migration recovery.
v2: Moved few functions to better files
v3: Take job_list_lock
v4: Rephrased comments
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-7-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
All contexts require an update of state data, as the data includes
GGTT references to memirq-related buffers.
Default contexts need these references updated as well, because they
are not refreshed when a new context is created from them.
The way we write to vram requires scratch buffer to be used
before the whole block is memcopied. Since using kalloc() within
specific recovery functions would lead to unintended relations
between locks, we are allocating the buffer earlier, before
any locks are taken. The same buffer will be used for other steps
of the recovery.
v2: Update addresses by xe_lrc_write_ctx_reg() rather than
set_memory_based_intr()
v3: Renamed parameter, reordered parameters in some functs
v4: Check if have MEMIRQ, move `xe_gt*` funct to proper file
v5: Revert back to requiring scratch buffer, but allocate it
earlier this time
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-6-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
All contexts require an update due to GGTT range shift, as that
affects their HWSP.
The HW status page of a context contains GGTT references, which
need to be shifted to a new range (or re-computed using the
previously updated vma nodes). The references include ring start
address and indirect state address.
v2: move some functions to better matched files
v3: Add missing kerneldocs
v4: Style fix
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-5-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Resetting GuC during recovery could interfere with the recovery
process. Such reset might be also triggered without justification,
due to migration taking time, rather than due to the workload not
progressing.
Doing GuC reset during the recovery would cause exit of RESFIX state,
and therefore continuation of GuC work while fixups are still being
applied. To avoid that, reset needs to be blocked during the recovery.
This patch blocks the reset during recovery. Reset request in that
time range will be stalled, and unblocked only after GuC goes out
of RESFIX state.
In case a reset procedure already started while the recovery is
triggered, there isn't much we can do - we cannot wait for it to
finish as it involves waiting for hardware, and we can't be sure
at which exact point of the reset procedure the GPU got switched.
Therefore, the rare cases where migration happens while reset is
in progress, are still dangerous. Resets are not a part of the
standard flow, and cause unfinished workloads - that will happen
during the reset interrupted by migration as well, so it doesn't
diverge that much from what normally happens during such resets.
v2: Introduce a new atomic for reset blocking, as we cannot reuse
`stopped` atomic (that could lead to losing a workload).
v3: Switched atomic functs to ones which include proper barriers
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-4-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
While applying post-migration fixups to VF, GuC will not respond
to any commands. This means submissions have no way of finishing.
To avoid acquiring additional resources and then stalling
on hardware access, pause the submission work. This will
decrease the chance of depleting resources, and speed up
the recovery.
v2: Commented xe_irq_resume() call
v3: Typo fix
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-3-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Non-virtualized resources require fixups after SRIOV VF migration.
Caching GGTT references rather than re-computing them from the
underlying Buffer Object is something we want to avoid, as such
code would require additional fixup step and additional locking
around all the places where the address is accessed.
This change removes the cached GPU address from the Sub-Allocation
Manager, and introduces a function which recomputes and returns
the address instead.
v2: renamed xe_sa_manager_gpu_addr(), added kerneldoc
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-2-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
It has been observed that during `xe_display_pm_suspend()` execution,
an HPD interrupt can still be triggered, resulting in `dig_port_work`
being scheduled. The issue arises when this work executes after
`xe_display_pm_suspend_late()`, by which time the display is fully
suspended.
This can lead to errors such as "DC state mismatch", as the dig_port
work accesses display resources that are no longer available or
powered.
To address this, introduce 'intel_encoder_block_all_hpds' and
'intel_encoder_unblock_all_hpds' functions, which iterate over all
encoders and block/unblock HPD respectively.
These are used to:
- Block HPD IRQs before calling 'intel_hpd_cancel_work' in suspend
and shutdown
- Unblock HPD IRQs after 'intel_hpd_init' in resume
This will prevent 'dig_port_work' being scheduled during display
suspend.
Continuation of previous patch discussion:
https://patchwork.freedesktop.org/patch/663964/
Changes in v2:
- Add 'intel_encoder_block_all_hpds' to 'xe_display_pm_shutdown'.(Imre
Deak)
- Add 'intel_hpd_cancel_work' to 'xe_display_fini_early' to cancel
any HPD pending work at late driver removal. (Imre Deak)
Changes in v3:
- Move 'intel_encoder_block_all_hpds' after intel_dp_mst_suspend
in 'xe_display_pm_shutdown'.(Imre Deak)
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250724083928.2298199-1-dibin.moolakadan.subrahmanian@intel.com
|
|
This driver, for the time being, assumes that the kernel page size is 4kB,
so it fails on loong64 and aarch64 with 16kB pages, and ppc64el with 64kB
pages.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250802024152.3021-1-Simon.Richter@hogyros.de
|
|
Display has switched to its own workqueue, no longer using
xe->unordered_wq.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250731111214.1130130-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Expose the places that need i915_utils.h, and include it where needed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/6338c8524e600e048b56c5484624cfb51ed49d1d.1753965351.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
After refactors, a lot of platform macros have become unused. Remove
them before new users have a chance to pop up.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/4507b49ead12c997de4615fa6ec277e666e5226a.1753965351.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_bridge_detect
This fix the make htmldocs warnings:
drivers/gpu/drm/drm_bridge.c:1242: warning: Function parameter or struct
member 'connector' not described in 'drm_bridge_detect'
Fixes: 5d156a9c3d5e ("drm/bridge: Pass down connector to drm bridge detect hook")
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250716125602.3166573-1-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Seems we missed one drm-misc-next pull-request in drm-misc-next-fixes.
This is required to pull in 5d156a9c3d5e ("drm/bridge: Pass down
connector to drm bridge detect hook") and update its docs.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Use recommended values as per wa_14021694213 to compare with the
calculated value and choose minimum of them.
v2: corrected checkpatch warning and retain the restriction for
min_hblank (Jani)
v3: use calculated value to compare with recomended value and choose
minimum of them (Imre)
v4: As driver supported min bpc is 8, omit the condition check for
bpc6 with ycbcr420. Added a note for the same (Imre)
v5: Add a warn for the unexpected case of 6bpc + uhbr + ycbcr420
v6: Reworded the comments and check fo anything < compressed bpp 8(Imre)
v7: Fix checkpatch warning. (Ankit)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250730-min_hblank-v7-1-179360220ced@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
|
|
There is a spelling mistake of 'notifer' in the comment which
should be 'notifier'.
Link: https://lkml.kernel.org/r/94190C5F54A19F3E+20250722073431.21983-3-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make sure to drop the OF node reference taken when creating the aux
bridge device when the device is later released.
Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers")
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708085124.15445-2-johan@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Pull virtio updates from Michael Tsirkin:
- vhost can now support legacy threading if enabled in Kconfig
- vsock memory allocation strategies for large buffers have been
improved, reducing pressure on kmalloc
- vhost now supports the in-order feature. guest bits missed the merge
window.
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits)
vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
vsock/virtio: Rename virtio_vsock_skb_rx_put()
vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
vsock/virtio: Move SKB allocation lower-bound check to callers
vsock/virtio: Rename virtio_vsock_alloc_skb()
vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
vsock/virtio: Validate length in packet header before skb_put()
vhost/vsock: Avoid allocating arbitrarily-sized SKBs
vhost_net: basic in_order support
vhost: basic in order support
vhost: fail early when __vhost_add_used() fails
vhost: Reintroduce kthread API and add mode selection
vdpa: Fix IDR memory leak in VDUSE module exit
vdpa/mlx5: Fix release of uninitialized resources on error path
vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit
virtio: virtio_dma_buf: fix missing parameter documentation
vhost: Fix typos
vhost: vringh: Remove unused functions
vhost: vringh: Remove unused iotlb functions
...
|
|
There is an extraneous space before a newline in a drm_dbg_kms message.
Remove the space.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801164658.2438212-1-colin.i.king@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
