| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add dmub command to support LSDMA
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Move vmalloc.h include code to header file.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add support for 2nd sharpening range for cases where we want
override existing DCN sharpening range
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When doing 2:1 downscaling on a YUV sub-sampled format, the chroma
scaling ratio is 1:1. Since chroma has cositing, it is needed to do
scaling on the chroma plane(s) and not to bypass chroma scaling.
[How]
Do not set the chroma taps to one when the chroma ratio is identity
and the input format is a sub-sampled YUV format.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Navid Assadian <Navid.Assadian@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DML needs a path for FAMS methods.
[How]
Apply instance of fams2_stream_sub_params_v2 structure with
a FAMS placeholder for DML.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In the case of an external monitor disconnection,
the kernel mode will attempt to post new timing
validation with two path counts (eDP + external
monitor removed to virtual).
[how]
Skip validating color depth and pixel encoding in the
scenario involving a DP to HDMI active converter dongle.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Observe that we try to access DPCD 0x600h of disconnected DP ports.
In order not to wasting time on retrying these ports, call
dpcd_write_rx_power_ctrl() after checking its connection status.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The `drm_*()` print macros will handle including the driver in the print
already. The extra print of the word `amdgpu` is unnecessary.
[How]
Modify all prints to drop `amdgpu: `.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The quantity and duration of FAMS2 commands are set to increase
in future products. This necessitates the implementation of a new
mechanism for chaining commands together, allowing all commands
to be processed within a single transaction.
[How]
The indirect buffer acts as a shared buffer on the driver side,
mapped to DMUB's internal CW7 address. Its source address and
size are sent through mailbox command to DMUB, triggering the
transaction.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Move only RMCM programming outside of dcn401. Extended HW
definition in dc for memory layout to extend support.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Nits programming for SDR panel is only supported by VESA ABC.
[How]
1. Loose nits programming for OLED SDR panel with AMD ABC.
2. We support two ABC methods. Disable one before we program the other
in case panel freaks out.
3. Update HDR judgement in setBR with a solider condition.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Store state related info inside mode_lib.
- Fix bad DCFCLK deep sleep
- Update FAMS structure in DMUB header
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
New enums need to be added to the end to avoid
back compat issues.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Refactoring some DMUB related structs and enum.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DC and AC levels are advertised in a percentage, not a luminance.
[How]
Scale DC and AC levels to supported values.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4221
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Default BIOS brightness caps are buried in ACPI.
[How]
Add extra dynamic debug that can show default brightness caps.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
It sent an error msg when it failed to read the DP tunneling DPCD field.
This should just be a warning msg. Use a DC log instead of a DM error msg.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We've made fix for garbage in dcn31_reset_back_end_for_pipe(), adding
blank_stream() before disable_crtc(). And set_dpms_off() will call
blank_stream() again.
[How]
Add flag to avoid calling blank_stream() twice.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.
[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Add userq fence support to SDMAv7.0.
- GFX12's user fence irq src id differs from GFX11's,
hence we need create a new irq srcid header file for GFX12.
User fence irq src id information-
GFX11 and SDMA6.0 - 0x43
GFX12 and SDMA7.0 - 0x46
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The "num_syncobj_handles" is a u32 value that comes from the user via the
ioctl. On 32bit systems the "sizeof(uint32_t) * num_syncobj_handles"
multiplication can have an integer overflow. Use size_mul() to fix that.
Fixes: 38c67ec9aa4b ("drm/amdgpu: Add input fence to sync bo map/unmap")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch only affects 32bit systems. There are several integer
overflows bugs here but only the "sizeof(u32) * num_syncobj"
multiplication is a problem at runtime. (The last lines of this patch).
These variables are u32 variables that come from the user. The issue
is the multiplications can overflow leading to us allocating a smaller
buffer than intended. For the first couple integer overflows, the
syncobj_handles = memdup_user() allocation is immediately followed by
a kmalloc_array():
syncobj = kmalloc_array(num_syncobj_handles, sizeof(*syncobj), GFP_KERNEL);
In that situation the kmalloc_array() works as a bounds check and we
haven't accessed the syncobj_handlesp[] array yet so the integer overflow
is harmless.
But the "num_syncobj" multiplication doesn't have that and the integer
overflow could lead to an out of bounds access.
Fixes: a292fdecd728 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Users have reported that they have to reduce the level of undervolting
to acheive stability when dynamic workload profiles are enabled on
GC 10.3.x. Disable dynamic workload profiles if the user has enabled
OD.
Fixes: b9467983b774 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4262
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.15.x
|
|
This patch updates the cleaner shader, which is responsible for
initializing GPU resources such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs). Changes include adjustments to register clearing and shader
configuration.
- Updated GPU resource initialization addresses in the cleaner shader
from `be803080` to `be803000`.
- Simplified the logic in the SGPR clearing section, ensuring all SGPRs
are set to zero.
Fixes: 25961bad9212 ("drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Manu Rastogi <manu.rastogi@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add more checks for valid vram size and log error, if any.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
KFD has been confirmed that can run on RISCV systems. It's necessary to
support CONFIG_HSA_AMD on RISCV.
Signed-off-by: Xuemei Liu <liu.xuemei1@zte.com.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Access the dma-fence internals via the previously added helpers.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250515095004.28318-6-tvrtko.ursulin@igalia.com
|
|
With the goal of reducing the need for drivers to touch (and dereference)
fence->ops, we move the 64-bit seqnos flag from struct dma_fence_ops to
the fence->flags.
Drivers which were setting this flag are changed to use new
dma_fence_init64() instead of dma_fence_init().
v2:
* Streamlined init and added kerneldoc.
* Rebase for amdgpu userq which landed since.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250515095004.28318-3-tvrtko.ursulin@igalia.com
|
|
The default core shrink target of 128 pages (SHRINK_BATCH) is quite low
relative to how cheap TTM pool shrinking is, and how the free pages are
distributed in page order pools.
We can make the target a bit more aggressive by making it roughly the
average number of pages across all pools, freeing more of the cached
pages every time shrinker core invokes our callback.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250603112750.34997-3-tvrtko.ursulin@igalia.com
|
|
Currently the TTM shrinker aborts shrinking as soon as it frees pages from
any of the page order pools and by doing so it can fail to respect the
freeing target which was configured by the shrinker core.
We use the wording "can fail" because the number of freed pages will
depend on the presence of pages in the pools and the order of the pools on
the LRU list. For example if there are no free pages in the high order
pools the shrinker core may require multiple passes over the TTM shrinker
before it will free the default target of 128 pages (assuming there are
free pages in the low order pools). This inefficiency can be compounded by
the pool LRU where multiple further calls into the TTM shrinker are
required to end up looking at the pool with pages.
Improve this by never freeing less than the shrinker core has requested.
At the same time we start reporting the number of scanned pages (freed in
this case), which prevents the core shrinker from giving up on the TTM
shrinker too soon and moving on.
v2:
* Simplify loop logic. (Christian)
* Improve commit message.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250603112750.34997-2-tvrtko.ursulin@igalia.com
|
|
Pull bitmap updates from Yury Norov:
- dead code cleanups for cpumasks and nodemasks (me)
- fixed-width flavors of GENMASK() and BIT() (Vincent, Lucas and me)
- FIELD_MODIFY() helper (Luo)
- for_each_node_with_cpus() optimization (me)
- bitmap-str fixes (Andy)
* tag 'bitmap-for-6.16-rc1' of https://github.com/norov/linux:
topology: make for_each_node_with_cpus() O(N)
bitfield: Add FIELD_MODIFY() helper
bitmap-str: Add missing header(s)
bitmap-str: Get rid of 'extern' for function prototypes
build_bug.h: more user friendly error messages in BUILD_BUG_ON_ZERO()
test_bits: add tests for BIT_U*()
test_bits: add tests for GENMASK_U*()
drm/i915: Convert REG_GENMASK*() to fixed-width GENMASK_U*()
bits: introduce fixed-type BIT_U*()
bits: introduce fixed-type GENMASK_U*()
bits: add comments and newlines to #if, #else and #endif directives
cpumask: drop cpumask_assign_cpu()
riscv: switch set_icache_stale_mask() to using non-atomic assign_cpu()
cpumask: add non-atomic __assign_cpu()
nodemask: drop nodes_shift
|
|
Christian needs a recent drm-next branch to merge fence patches.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
When configuring the HDMI PLL, calculations use DIV_ROUND_UP_ULL and
DIV_ROUND_DOWN_ULL macros, which internally rely on do_div. However, do_div
expects a 32-bit (u32) divisor, and at higher data rates, the divisor can
exceed this limit. This leads to incorrect division results and
ultimately misconfigured PLL values.
This fix replaces do_div calls with div64_base64 calls where diviser
can exceed u32 limit.
Fixes: 5947642004bf ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250528064557.4172149-1-dibin.moolakadan.subrahmanian@intel.com
|
|
The VF GGTT configuration was prepared by the PF, which should be
trusted, was obtained from the GuC, which likely already did some
sanity checks too, but since it's a received data, we should have
our own sanity checks to detect early any misconfiguration.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250602103325.549-4-michal.wajdeczko@intel.com
|
|
Some of our VF functions, even if they take a GT pointer, work
only on primary GT and really are tile-related and would be better
to keep them separate from the rest of true GT-oriented functions.
Move them to a file and update to take a tile pointer instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20250602103325.549-3-michal.wajdeczko@intel.com
|
|
In upcoming patch we want to separate tile-oriented VF functions
from GT-oriented functions and to allow the former access a GGTT
configuration stored at GT level we need to provide some helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis<tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20250602103325.549-2-michal.wajdeczko@intel.com
|
|
Import dmabuf without mapping its sg_table to avoid issues likes:
udl 2-1.4:1.0: swiotlb buffer is full (sz: 2097152 bytes), total 65536 (slots), used 1 (slots)
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-3-oushixiong1025@163.com
|
|
Import dmabuf without mapping its sg_table to avoid issues likes:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-2-oushixiong1025@163.com
|
|
[WHY]
1. Drivers using DRM_GEM_SHADOW_PLANE_HELPER_FUNCS and
DRM_GEM_SHMEM_DRIVER_OPS (e.g., udl, ast) do not require
sg_table import.
They only need dma_buf_vmap() to access the shared buffer's
kernel virtual address.
2. On certain Aspeed-based boards, a dma_mask of 0xffff_ffff may
trigger SWIOTLB during dmabuf import. However, IO_TLB_SEGSIZE
restricts the maximum DMA streaming mapping memory, resulting in
errors like:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
[HOW]
Provide a gem_prime_import implementation without sg_table mapping
to avoid issues (e.g., "swiotlb buffer is full"). Drivers that do not
require sg_table can adopt this.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-1-oushixiong1025@163.com
|
|
There is unmatched xe_vm_unlock() in the __xe_exec_queue_init().
Leftover from commit fbeaad071a98 ("drm/xe: Create LRC BO without VM")
Fixes: fbeaad071a98 ("drm/xe: Create LRC BO without VM")
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://lore.kernel.org/r/20250530135627.2821612-1-maciej.patelczyk@intel.com
|
|
Add the userspace interface to load the driver with fewer engines.
The syntax is to just echo the engine names to a file in configfs, like
below:
echo 'rcs0,bcs0' > /sys/kernel/config/xe/<bdf>/engine_allowed
With that engines other than rcs0 and bcs0 will not be enabled. To
enable all instances from a class, a '*' can be used.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-4-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Sometimes it's useful to load the driver with a smaller set of engines
to allow more targeted debugging, particularly on early enabling.
Besides checking what is fused off in hardware, add similar logic to
disable engines in software. This will use configfs to allow users
to set what engine to disable, so already add prepare for that. The
exact configfs interface will be added later.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-3-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
It's useful to see in the log message what GT was being checked for
disabled/fused-off engines. Especially on multi-tile platforms the
different tiles may be fused differently making it harder to parse
the information.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-2-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Drop the semicolons from the dummy implementation: they shouldn't be
there.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-1-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There could be a scenario where the VF driver is resuming faster
than the driver PF is able to complete the VF FLR sequence which
includes reset of the VF scratch registers. This may result in
deletion of the ongoing HXG message (it could be either a host
request or a GuC response).
When we detect that HXG message was likey lost (scratch register
with HXG header was zeroed) try to send this request once more
before giving up.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250528090021.329-1-michal.wajdeczko@intel.com
|
|
During the probe we dump the discovered GT topology, but instead
of a generic printer we can use our own GT-oriented printer which
contains information about the source GT.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250530210524.505-1-michal.wajdeczko@intel.com
|
|
We are processing here G2H messages, so we should use GT oriented
messages to retain information about the origin GT. While at it,
print error codes in a user-friendly way.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250530164835.461-1-michal.wajdeczko@intel.com
|
|
Like done in commit eaa287069a70 ("drm/xe/guc_submit: Simplify and fix
diff calculation"), just use u32 for wrapping the value, which is
simpler and more correct: when wrapping on 32b, the accumulated value
was off by one.
Also, do not mix the u64 value from pmt with the u32 value used for the
calculation.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250530-xe-hwmon-wrap-v2-1-ce653db7fe4a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Starting PXP and adding a queue to the PXP queue list are separate
actions. Given that a queue can only be added to the list if PXP is
active, the 2 actions were bundled together to avoid having to
re-lock and re-check the status to perform the queue addition after
having done so during the PXP start. However, we don't save a lot of
complexity by doing so and we lose in clarity of code, so overall it's
cleaner to just keep the 2 actions separate.
v2: remove leftover rpm_get (John), fix rpm_put in error case
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-8-daniele.ceraolospurio@intel.com
|
|
The expected flow of operations when using PXP is to query the PXP
status and wait for it to transition to "ready" before attempting to
create an exec_queue. This flow is followed by the Mesa driver, but
there is no guarantee that an incorrectly coded (or malicious) app
will not attempt to create the queue first without querying the status.
Therefore, we need to clarify what the expected behavior of the queue
creation ioctl is in this scenario.
Currently, the ioctl always fails with an -EBUSY code no matter the
error, but for consistency it is better to distinguish between "failed
to init" (-EIO) and "not ready" (-EBUSY), the same way the query ioctl
does. Note that, while this is a change in the return code of an ioctl,
the behavior of the ioctl in this particular corner case was not clearly
spec'd, so no one should have been relying on it (and we know that Mesa,
which is the only known userspace for this, didn't).
v2: Minor rework of the doc (Rodrigo)
Fixes: 72d479601d67 ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-7-daniele.ceraolospurio@intel.com
|
