| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 76a2db58e95e328007043f54ac3c7336ccbee440 upstream.
dcn32_update_clocks_update_dtb_dto() reprograms the DTB DTO of every
timing generator in the context whenever the DTBCLK reference changes,
passing a zeroed pixel rate and never setting is_hdmi.
dccg32_set_dtbclk_dto() treats a zero pixel rate as a disable request,
and that branch drives PIPE_DTO_SRC_SEL to the DP DTO source. A timing
generator actively scanning out an HDMI stream therefore has its pixel
rate source re-muxed out from under the live raster, and the OTG stops
on the spot.
Two displays where only one runs a 128b/132b link hit this reliably.
is_dtbclk_required() holds the DTBCLK reference high while both are
active, and the moment the 128b/132b stream is torn down (compositor
switch, display disable, hot-unplug) the next safe_to_lower pass drops
the reference to the lowest DPM level and the DTO walk freezes the
surviving screen. On Navi31 the DAL mailbox then goes deaf on the
DISPCLK hard-min that follows the walk in dcn32_update_clocks(),
stranding both SMU mailboxes until reboot.
Set is_hdmi for HDMI and DVI signals so the disable path leaves the
pixel rate source selection on the HDMI path, and pass the real pixel
rate for 128b/132b streams so a reference change rescales their DTO
instead of disabling it.
Fixes: 128c1ca0303f ("drm/amd/display: Update DTBCLK for DCN32")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ mschwartz: dcn32 clk_mgr hunk only, as 6.6.y predates the dcn35
clk_mgr. The rest is HDMI FRL enablement, absent before 7.2, so the
FRL conditions and the req_audio_dtbclk_khz assignment they guard are
dropped and the FRL-centric changelog is rewritten. Added the
pipe_ctx->stream check the new dereferences need. ]
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ea772a440d56b285f4d491affac50ecd41f6b402 upstream.
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
Fixes: 9d0af8b4def0 ("drm/amdgpu: pre-map device buffer as cached for A+A config")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 28c9b3c5dc35cc790d11e26ca3fc6e068be63998 upstream.
Call pm_genpd_remove() to unregister from global list prior to releasing
acp_genpd memory, and clear the pointer after free.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c01c811be47e6b146552dd59bfedbea8f09b8f4 upstream.
When width or height is less than 16, width_in_mb or height_in_mb
becomes 0, leading to fs_in_mb being 0. This causes a division by
zero when calculating num_dpb_buffer in H264 and H264 Perf decode
paths.
Add validation to reject frames with width < 16 or height < 16
before performing any calculations that depend on these values.
V2: Format change - move up all vaiable definitions.
V3: Use warn_once to avoid spam.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_dp_mst_topology_queue_probe()
commit 613059875958e7b217b250ed14c3b189f9488421 upstream.
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost.
Fixes: dbaeef363ea5 ("drm/dp_mst: Add a helper to queue a topology probe")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jonas Emilsson <jonas.emilsson@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/all/20260503034533.1023686-1-jonas.emilsson@gmail.com
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260622140532.526722-1-luciano.coelho@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b4082fabc67c9780b06eb959e59dd92fa79c0f0 upstream.
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 186bfdc4e26d019b2e7570cb121964a1d89b2e5b upstream.
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40cdbe9fa424cc6264a7aed93a04bd7d69109d9e upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6302be10b521f5106ce01eb5a724b9e7945a5061 upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00f4050f7c367d7bdce347ca279ce467c434cf15 upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 84a1a8a952ab4b8c23c5dd1f2eea4049cb4914f5 upstream.
There's no need to crash the kernel for this case.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d7c25208ca612b754f3bf39e9f16e725b828891)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0eebcab1ea2a77f086a04108f386f82ee3496022 upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d06c4173a7c38c7a39e98859f839ce714c7af2c9 upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53c78ab388bfc1a4d72e756815d0db0a842c812e upstream.
SCPM owns power feature control when enabled.
Make pp_features read-only during sysfs setup by clearing its write bits
and store callback.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a5786e191fdce36c5db170e5209cf609e8f0087)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c9e6367639548307d3f578f6943ce72c9d39087 upstream.
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects.
Fixes: 463873d57014 ("drm/vc4: Add an API for creating GPU shaders in GEM BOs.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/dri-devel/20260720085554.B0AF01F000E9@smtp.kernel.org/
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260721011558.1672477-1-lilinmao@kylinos.cn
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4f55260f7f7d4dc4d0ee55063dfb0c457b77991 upstream.
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available.
Fixes: 504901dbb0b5 ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260623193314.506257-1-ian.forbes@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2f895f3c852063258d62e9f74b081de07ca95df upstream.
amdgpu_bo_create_reserved() only allocates a new BO when
*bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is
NULL, it simply skips creation when *bo_ptr is non-NULL.
But it unconditionally reserves, pins, gart allocates
and maps the BO afterwards.
When the same non-NULL BO pointer is passed in again,
for example firmware buffers that live in adev and are
re-loaded on every resume / cp_resume / start
under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases
pin_count unconditionally, however the matching teardown only unpins
once, so pin_count never drops to zero, so TTM is not able
to move, swap or evict a BO, causing BO leaks.
This commit fixes this issue by only pinning the bo
once at creation, and repeated calls no longer
take additional pin references.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ddc0ae76202c447b6aec61e907b852bc94671cf)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9fa26b9eed6195bf840f39ac183b9a6237548755 upstream.
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
Fixes: 9b690ef3c704 ("drm/amd/display: Avoid full modeset when not required")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85371c5ef502d10add72eab38711e191dccea981 upstream.
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb06c ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d34acad064ee7d82bd18f5d87592c422d4d323ac)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db7e8108809a2245f0a17ba323f027cac0941ffb upstream.
On systems where PCI bus renumbering occurs (e.g. pci=realloc,
resource conflicts), the runtime bus number may differ from the
BIOS POST bus number recorded in the VFCT table. This causes
amdgpu_acpi_vfct_bios() to fail finding the VBIOS even though
the correct device entry exists.
Introduce amdgpu_acpi_vfct_match() which treats the bus number
as a soft filter: vendor/device/function identity is the hard
requirement, while exact bus match is the preferred path. When
bus numbers disagree but device identity matches, accept the
VFCT entry and log a dev_notice for diagnostics.
Reported-by: Oz Tiram <oz@shift-computing.de>
Closes: https://lore.kernel.org/amd-gfx/20260621173211.28443-1-oz@shift-computing.de/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260708193518.702584-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 11c141672045ffc0187aa604f2c0f597bc334fb2)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b56757a9a7456825eb668fde92299e01c5e2721 upstream.
Setting context engine slot N into I915_ENGINE_CLASS_INVALID /
I915_ENGINE_CLASS_INVALID_NONE and attempting to apply
I915_CONTEXT_PARAM_SSEU to the same slot N will deref NULL.
Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Cc: Faith Ekstrand <faith.ekstrand@collabora.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patch.msgid.link/20260701075555.52142-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 36eda5b5c2d40da41cc0a5403c26986237cf9e87)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eed3de2acf6aa5154d49098b026710b646db67ee upstream.
After a successful BALANCE/PARALLEL_SUBMIT extension on context
creation, error during processing of next user extension leaks
the siblings[] array. Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Cc: Faith Ekstrand <faith.ekstrand@collabora.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260701073030.44850-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit aa65e0a4b51b3b54b53e4142aaa2d997aa1061ff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e33f0de5fdcd09e51fdec1e5822448970b6420f upstream.
Avoid returning &node->base when node is NULL due to OOM
during GFP_ATOMIC allocation.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: bfaae47db3c0 ("drm/i915: make lockdep slightly happier about execbuf.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260624090940.74840-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 6029bc064f0b1bac184203a50fbaaf070fa18832)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e98ed3113943257ad6e5c1e6beddbdb482a70ad upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8d144a0eb09537055841af48c9e7c2d4cd48e84d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9dd618a635d39fbb211454b6e8837b2a7f10fb0 upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae658afc7f47f6147371ec42cc6b1a793dfdb5af)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec42c96c322e5cc48099ab5e67b5cbe236cb1949 upstream.
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e1a53892ba7f8a3e1da6bfc53c83ae7c812dccd upstream.
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected.
Fixes: b4b01b4995fb ("drm/virtio: add edid support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260620-b4-disp-22bba7bf-v1-1-b95924cee742@proton.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
prev_sink reference
commit a6e14b976be48eebd8769cb5b883a6af7fc5ade1 upstream.
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
Fixes: 54618888d1ea ("drm/amd/display: break down dc_link.c")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260626124555.36910-1-vulab@iscas.ac.cn
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 45510cf662dcf46b5d8926d454f338809f107b9d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac11060c6d4959e2d4ceada037d2e1e1bfcf6645 upstream.
The mode-setting pipeline can disabled damage clippings for a commit
by setting ignore_damage_clips in struct drm_plane_state. The commit
will then do a full display update.
Test the flag in DCN code and do a full update in DCN code if it has
been set.
Commit 35ed38d58257 ("drm: Allow drivers to indicate the damage helpers
to ignore damage clips") introduced ignore_damage_clips to selectively
ignore damage clipping in certain framebuffer changes. This driver does
not do that, but DRM's damage iterator will soon rely on the flag.
Therefore supporting it here as well make sense for consistency.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 35ed38d58257 ("drm: Allow drivers to indicate the damage helpers to ignore damage clips")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zackr@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a24019f6480fad5c077b5956eed942c8960323d6)
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb52249fbbe948875155ccd45cd8d74bf4ae747b upstream.
The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT
allocate_event_notification_slot has an option to specify
an event id to allocate at, used by CRIU. We weren't checking
the bounds on that value.
Check them.
v2: Lower bounds check is unecessary because of idr_alloc
already rejecting negative numbers. Upper bounds check should
be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might
not yet exist
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f896e86273dbbebb5eac966b4a201b5c62a02e9a upstream.
r100_copy_blit() copies BOs as 1024-pixel-wide ARGB8888 blits, so one
GPU page becomes one blit row. Large copies are split into chunks of at
most 8191 rows.
The kernel register header names the packet coordinate dwords SRC_Y_X
and DST_Y_X. In the BITBLT_MULTI description in
R5xx_Acceleration_v1.5.pdf docs, these correspond to [SRC_X1 | SRC_Y1]
and [DST_X1 | DST_Y1], which are signed 13-bit coordinates in the
-8192..8191 range. The old code kept SRC/DST_PITCH_OFFSET at the BO base
and used SRC_Y_X/DST_Y_X as the chunk address, so large BO moves could
exceed that coordinate range.
Compute per-chunk SRC/DST_PITCH_OFFSET bases and emit zero source and
destination coordinates. r100_copy_blit() already packs
SRC/DST_PITCH_OFFSET as pitch plus base offset, so large chunk addresses
belong there rather than in the coordinate fields.
This fixes Prison Architect corruption with 4096x4096 mipped textures
after they are evicted to GTT under memory pressure on RV530.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/work_items/6716
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pavel Ondračka <pavel.ondracka@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 87be26aee76239c6da03e599f238a426897f78ad)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3027973f692077a1b66a9fb26d6a7c46c0dc72c upstream.
In nvkm_acr_oneinit(), nvkm_kmap(acr->wpr) is invoked unconditionally
at line 309 to obtain a mapping reference. Additionally, when both
acr->wpr_fw and acr->wpr_comp are present, a second nvkm_kmap() is
called inside the conditional block. Both mappings are expected to be
released by nvkm_done(acr->wpr) at line 320 before the function returns
successfully.
However, when a mismatch is detected during the loop within the
conditional block, the function returns -EINVAL at line 318 without
calling nvkm_done(). This results in a leak of the kmap reference(s)
acquired earlier.
Fix the issue by invoking nvkm_done(acr->wpr) prior to the early return
to ensure proper release of the mapping references.
Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260606155606.77593-1-vulab@iscas.ac.cn
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 914a76a9f08366434bf595700f62026b7a19a9cc upstream.
Add missing Spectre mitigation for userspace controlled parallel
submission slot.
Discovered using AI-assisted static analysis confirmed by Intel
Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: e5e32171a2cf ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: <stable@vger.kernel.org> # v5.16+
Link: https://patch.msgid.link/20260622132539.165558-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 15b9353deff3cf72331c387780de3cf9c316b643)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab99ead646b1b833ecd57fe577a2816f2e848167 upstream.
nouveau_uvmm_vm_bind_ucopy() and nouveau_exec_ucopy() place their error
cleanup labels in allocation order rather than reverse allocation order.
On a u_memcpya() failure for in_sync.s, the goto to err_free_ops (or
err_free_pushs) frees the first allocation and then falls through to
err_free_ins, which calls u_free() on args->in_sync.s.
Since args->in_sync.s still holds the ERR_PTR returned by the failed
u_memcpya(), and ERR_PTR values are not caught by ZERO_OR_NULL_PTR(),
kvfree() proceeds to dereference it, which can result in a kernel oops.
A failure for out_sync.s instead jumps to err_free_ins and skips freeing
the first allocation, leading to a memory leak.
Fix by swapping the cleanup label order so resources are freed in the
correct reverse allocation sequence.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881484D91A6F80271415F71AF1A2@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 84c4c36acd5c4b2558b5069f869a165b2c655c84 upstream.
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
Fixes: ac9287055ff1 ("drm/amdgpu: add gfx shadow CS IOCTL support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee94a65f192c05c543b4d3ad7137cd696b5c18fc upstream.
The UVD code relies on GTT to GTT moves in order to ensure
that its BOs don't cross 256M segments.
Fixes: bfe5e585b44f ("drm/ttm: move last binding into the drivers.")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 21fd45e5e2628d00b478590bcc3d14d3de5d45b6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8002b744ad70055ef11ff7d0a7d685bfe8ffe6e4 upstream.
These UVD versions don't fully support GPUVM and are only
validated to work when their VCPU BO is placed in VRAM.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01b8dfc0660db5d6cdd62c22dc20f774a26ce853)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
(v2)
commit 32bd35f068a3507a1b3922cd12ea2985fc58c85b upstream.
UVD 4.x and older can only access MSG, FEEDBACK buffers from a
specific 256M VRAM segment that the VCPU BO is also located in.
We already modify all placements of the given BO to ensure
the BO is placed within this segment.
Previously, it always assumed that the VCPU segment is
the first 256M of VRAM, even though under some conditions
the VCPU BO could be allocated outside this segment,
which made UVD non-functional as the BOs were
not inside the same segment as the UVD VCPU BO.
Solve that by using the segment where the VCPU BO actually is.
This fixes an issue with UVD failing to initialize on SI/CIK
when resizable BAR is enabled and the VCPU BO is allocated
in a different segment.
v2:
- For other BOs, keep using the same UVD segment as before.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/3851
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbfd4d3fc2061a1ec8e9d36e65973ac3e813358a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b89ba3dba2f583626fb693e47e951ffb8bf591f upstream.
Three sideband reply parsers read 16-bit fields as:
val = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
and check bounds only after the fact. When idx == raw->curlen,
raw->msg[idx+1] reads one byte past the received message data into
the following struct fields (curchunk_len, curchunk_idx, curlen).
Affected functions:
- drm_dp_sideband_parse_enum_path_resources_ack()
full_payload_bw_number and avail_payload_bw_number fields
- drm_dp_sideband_parse_allocate_payload_ack()
allocated_pbn field
- drm_dp_sideband_parse_query_payload_ack()
allocated_pbn field
Fix by using a single combined check (idx + 2 > curlen) before each
2-byte read. Since the check is strictly tighter than idx > curlen,
no separate step is needed.
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510203128.2884846-1-ashutoshdesai993@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55bd5e685bda455b9b50c835f8c8442d52a344a3 upstream.
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection.
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260410041901.2438960-1-ashutoshdesai993@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a8f537f5a1eeac941f262fe73078d6b08ba83c0 upstream.
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added missing fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510201733.2882224-1-ashutoshdesai993@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d8b08844c0ecc6f2002fa68711e779aa18c8585 upstream.
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Link: https://lore.kernel.org/all/fbde0659-78f3-46e4-98cf-d832f765a18b@ideasonboard.com/
Cc: stable@vger.kernel.org # 6.1.x
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260505134705.188661-2-ivitro@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46c31e1604d121221167cb09380de8c7d53290b9 upstream.
The result of cdn_dp_reg_write() is checked everywhere (with the error
being logged by the callers) except one place in cdn_dp_config_video().
Add the missing result check, bailing out early on error...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/adf6b313-f7db-4d8f-9000-8c65446ba041@auroraos.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit bca364c4c75796650e53837fbec174a866141511.
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 612978b83f45bf7018815209db5395d759db6f26 ]
Compare the sampled clock values instead of their addresses. Comparing
addresses leaves the samples unsorted, preventing the code from discarding
the minimum and maximum samples.
Fixes: 1a5392479207 ("drm/i915/selftests: Measure CS_TIMESTAMP")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260714220430.238433-1-emreleno@gmail.com
(cherry picked from commit 682ea2d28d18bb06f9fc663cb5ab7e80dc0e606a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a82f1bb8191aec98a971a2196136016ef70c0880 ]
intel_engine_user.c checks CONFIG_DRM_I915_SELFTESTS before running
the engine UABI isolation check. Kconfig defines DRM_I915_SELFTEST,
without the trailing "S", and the rest of i915 uses
CONFIG_DRM_I915_SELFTEST.
Because CONFIG_DRM_I915_SELFTESTS is not backed by any Kconfig symbol,
the IS_ENABLED() test is always false. Use the existing selftest symbol
so the debug/selftest guarded path can be reached when selftests are
enabled.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the Kconfig definition and the inconsistent
guard in intel_engine_user.c.
Fixes: 750e76b4f9f6 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260705080225.436-1-pengpeng@iscas.ac.cn
(cherry picked from commit 14a2012a490258f3f93857bc4f1b203405964be7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
worker
[ Upstream commit d1b894c5bbb3fee0012bd14356286dc2384e8213 ]
A probe-time deadlock can occur between the dequeue worker and
drm_client_register(). During probe, drm_client_register() holds
clientlist_mutex and calls the fbdev hotplug callback, which triggers an
atomic commit that ends up sleeping in virtio_gpu_queue_ctrl_sgs()
waiting for virtqueue space. The dequeue worker that would free that
space calls virtio_gpu_cmd_get_display_info_cb(), which invokes
drm_kms_helper_hotplug_event() -> drm_client_dev_hotplug(), attempting
to acquire the same clientlist_mutex. Since wake_up() is only called
after the resp_cb loop, the probe thread is never woken and both threads
deadlock.
Fix this by removing the hotplug notification from
virtio_gpu_cmd_get_display_info_cb(). The display data (outputs[i].info)
is still updated synchronously in the callback.
For the init path, drm_client_register() already fires an initial
hotplug when the client is registered, which picks up the connector
state updated by display_info_cb.
For the runtime config_changed path, add a wait_event_timeout() in
config_changed_work_func() so that display_info_cb updates the connector
data before the hotplug notification is sent. Also replace
drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event() since
virtio-gpu never calls drm_kms_helper_poll_init() and thus
drm_helper_hpd_irq_event() always returns false without doing anything.
Fixes: 27655b9bb9f0 ("drm/client: Send hotplug event after registering a client")
Closes: https://syzkaller.appspot.com/bug?id=d6dd6f86d3aaf7eebe7406e45c1c6e549453f224
Closes: https://syzkaller.appspot.com/bug?id=908bd910da5dd79b88de4cf7baf376cc873a922e
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260713-virtiogpu_syzbot-v2-1-2958fa37d46d@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 337b1b566db087347194e4543ddfdfa5645275cc ]
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit faaa1e1155833e7d4ce7e3cfaf64c0d636b190db ]
drm_parse_tiled_block() casts the DisplayID block to a
struct displayid_tiled_block and reads the full fixed layout up to
tile->topology_id[7] without checking block->num_bytes. The DisplayID
iterator only validates the declared payload length, so a crafted EDID
can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or
DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at
the end of a DisplayID extension. The read then runs past the end of the
exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read.
Reject blocks shorter than the spec's 22-byte tiled payload before
reading the fixed struct, as drm_parse_vesa_mso_data() already does.
BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update
Read of size 2 at addr ffff888010077700 by task exploit/147
dump_stack_lvl (lib/dump_stack.c:94 ...)
print_report (mm/kasan/report.c:378 ...)
kasan_report (mm/kasan/report.c:595)
drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581)
bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574)
drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426)
status_store (drivers/gpu/drm/drm_sysfs.c:219)
...
vfs_write (fs/read_write.c:595 fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
Fixes: 40d9b043a89e ("drm/connector: store tile information from displayid (v3)")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260615184737.899892-1-xmei5@asu.edu
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2b270c0ecf6d95bcd14ef4c20d0301a88143ff5 ]
If there is an early failure during amdgpu probe, like missing firmware, it
will end up calling amdgpu_irq_disable_all, which takes irq.lock spinlock
without it being initialized.
Initializing irq.lock earlier at amdgpu_device_init fixes the issue.
[ 79.334079] INFO: trying to register non-static key.
[ 79.334081] The code is fine but needs lockdep annotation, or maybe
[ 79.334083] you didn't initialize this object before use?
[ 79.334084] turning off the locking correctness validator.
[ 79.334088] CPU: 2 UID: 0 PID: 1819 Comm: bash Not tainted 7.1.0-rc5-gfd06300b2348 #96 PREEMPT 8e8f461221633dae3c832d6689eaf0546c0ed4cd
[ 79.334092] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0133 08/05/2024
[ 79.334094] Call Trace:
[ 79.334095] <TASK>
[ 79.334097] dump_stack_lvl+0x5d/0x80
[ 79.334103] register_lock_class+0x7af/0x7c0
[ 79.334109] __lock_acquire+0x416/0x2610
[ 79.334114] lock_acquire+0xcf/0x310
[ 79.334117] ? amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.334503] ? _raw_spin_lock_irqsave+0x53/0x60
[ 79.334508] _raw_spin_lock_irqsave+0x3f/0x60
[ 79.334510] ? amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.334881] amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.335240] amdgpu_device_fini_hw+0x90/0x32c [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.335704] amdgpu_driver_load_kms.cold+0x22/0x44 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.336159] amdgpu_pci_probe+0x204/0x440 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.336494] local_pci_probe+0x3c/0x80
[ 79.336500] pci_call_probe+0x55/0x2e0
[ 79.336505] ? _raw_spin_unlock+0x2d/0x50
[ 79.336508] ? pci_match_device+0x157/0x180
[ 79.336512] pci_device_probe+0x9b/0x170
[ 79.336516] really_probe+0xd5/0x370
[ 79.336521] __driver_probe_device+0x84/0x150
[ 79.336525] device_driver_attach+0x47/0xb0
[ 79.336528] bind_store+0x73/0xc0
[ 79.336531] kernfs_fop_write_iter+0x176/0x250
[ 79.336536] vfs_write+0x24d/0x560
[ 79.336542] ksys_write+0x71/0xe0
[ 79.336546] do_syscall_64+0x122/0x710
[ 79.336550] ? do_syscall_64+0xd1/0x710
[ 79.336553] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 79.336557] RIP: 0033:0x7f92fd675006
[ 79.336561] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 79.336562] RSP: 002b:00007ffe4fa867a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 79.336565] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f92fd675006
[ 79.336567] RDX: 000000000000000d RSI: 000055b2dfce59b0 RDI: 0000000000000001
[ 79.336568] RBP: 00007ffe4fa867c0 R08: 0000000000000000 R09: 0000000000000000
[ 79.336569] R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
[ 79.336570] R13: 000055b2dfce59b0 R14: 00007f92fd7ca5c0 R15: 000055b2dfdbaf70
[ 79.336574] </TASK>
Fixes: 9950cda2a018 ("drm/amdgpu: drop the drm irq pre/post/un install callbacks")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dba3e10ecdeec85208e255853fcd3890880b10e)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
