summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2023-03-30drm/amdgpu: reposition the gpu reset checking for reuseTim Huang2-20/+25
commit aaee0ce460b954e08b6e630d7e54b2abb672feb8 upstream. Move the amdgpu_acpi_should_gpu_reset out of CONFIG_SUSPEND to share it with hibernate case. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/amdgpu: skip ASIC reset for APUs when go to S4Tim Huang1-1/+4
commit b589626674de94d977e81c99bf7905872b991197 upstream. For GC IP v11.0.4/11, PSP TMR need to be reserved for ASIC mode2 reset. But for S4, when psp suspend, it will destroy the TMR that fails the ASIC reset. [ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset [ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002 [ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed! [ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62 [ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62 [ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs [ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62 We can skip the reset on APUs, assuming we can resume them properly. Verified on some GFX11, GFX10 and old GFX9 APUs. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/i915: Preserve crtc_state->inherited during state clearingVille Syrjälä1-0/+1
commit 3a84f2c6c9558c554a90ec26ad25df92fc5e05b7 upstream. intel_crtc_prepare_cleared_state() is unintentionally losing the "inherited" flag. This will happen if intel_initial_commit() is forced to go through the full modeset calculations for whatever reason. Afterwards the first real commit from userspace will not get forced to the full modeset path, and thus eg. audio state may not get recomputed properly. So if the monitor was already enabled during boot audio will not work until userspace itself does an explicit full modeset. Cc: stable@vger.kernel.org Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit 2553bacaf953b48c59357f5a622282bc0c45adae) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/i915/active: Fix missing debug object activationNirmoy Das1-2/+1
commit e92eb246feb9019b0b137706c934b8891cdfe3c2 upstream. debug_active_activate() expected ref->count to be zero which is not true anymore as __i915_active_activate() calls debug_active_activate() after incrementing the count. v2: No need to check for "ref->count == 1" as __i915_active_activate() already make sure of that(Janusz). References: https://gitlab.freedesktop.org/drm/intel/-/issues/6733 Fixes: 04240e30ed06 ("drm/i915: Skip taking acquire mutex for no ref->active callback") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313114613.9874-1-nirmoy.das@intel.com (cherry picked from commit bfad380c542438a9b642f8190b7fd37bc77e2723) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD NaviKai-Heng Feng4-17/+18
commit 2b072442f4962231a8516485012bb2d2551ef2fe upstream. S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default"). The root cause is still not clear for now. So extend and apply the ASPM quirk from commit e02fe3bc7aba ("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to workaround the issue on Navi cards too. Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/meson: fix missing component unbind on bind errorsJohan Hovold1-5/+8
commit ba98413bf45edbf33672e2539e321b851b2cfbd1 upstream. Make sure to unbind all subcomponents when binding the aggregate device fails. Fixes: a41e82e6c457 ("drm/meson: Add support for components") Cc: stable@vger.kernel.org # 4.12 Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230306103533.4915-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/amd/display: fix wrong index used in dccg32_set_dpstreamclkHersen Wu1-2/+1
commit 4c94e57c258cb7800aa5f3a9d9597d91291407a9 upstream. [Why & How] When merging commit 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"), index change was not picked up. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming") Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not foundMatheus Castello1-2/+2
commit 1a70ca89d59c7c8af006d29b965a95ede0abb0da upstream. Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent with what all the other DRM bridge drivers are doing and this is required since the bridge might not be there when the driver is probed and this should not be a fatal failure. Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Matheus Castello <matheus.castello@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30drm/amd: Fix initialization mistake for NBIO 7.3.0Mario Limonciello1-5/+9
[ Upstream commit 1717cc5f2962a4652c76ed3858b499ccae6c277c ] The same strapping initialization issue that happened on NBIO 7.5.1 appears to be happening on NBIO 7.3.0. Apply the same fix to 7.3.0 as well. Note: This workaround relies upon the integrated GPU being enabled in BIOS. If the integrated GPU is disabled in BIOS a different workaround will be required. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/amdgpu: Fix call trace warning and hang when removing amdgpu devicelyndonli1-1/+1
[ Upstream commit 93bb18d2a873d2fa9625c8ea927723660a868b95 ] On GPUs with RAS enabled, below call trace and hang are observed when shutting down device. v2: use DRM device unplugged flag instead of shutdown flag as the check to prevent memory wipe in shutdown stage. [ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu] [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu] [ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu] [ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu] [ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [ +0.000090] drm_dev_release+0x28/0x50 [drm] [ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm] [ +0.000011] devm_action_release+0x15/0x20 [ +0.000003] release_nodes+0x40/0xc0 [ +0.000001] devres_release_all+0x9e/0xe0 [ +0.000001] device_unbind_cleanup+0x12/0x80 [ +0.000003] device_release_driver_internal+0xff/0x160 [ +0.000001] driver_detach+0x4a/0x90 [ +0.000001] bus_remove_driver+0x6c/0xf0 [ +0.000001] driver_unregister+0x31/0x50 [ +0.000001] pci_unregister_driver+0x40/0x90 [ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu] Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/amd/display: Update clock table to include highest clock settingSwapnil Patel1-1/+18
[ Upstream commit 2d99a7ec25cf456cd3680eb314d6454138e5aa64 ] [Why] Currently, the clk manager matches SocVoltage with voltage from fused settings (dfPstate clock table). And then corresponding clocks are selected. However in certain situations, this leads to clk manager not including at least one entry with highest supported clock setting. [How] Update the clk manager to include at least one entry with highest supported clock setting. Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/cirrus: NULL-check pipe->plane.state->fb in cirrus_pipe_update()Alexandr Sapozhnikov1-1/+1
[ Upstream commit 7245e629dcaaf308f1868aeffa218e9849c77893 ] After having been compared to NULL value at cirrus.c:455, pointer 'pipe->plane.state->fb' is passed as 1st parameter in call to function 'cirrus_fb_blit_rect' at cirrus.c:461, where it is dereferenced at cirrus.c:316. Found by Linux Verification Center (linuxtesting.org) with SVACE. v2: * aligned commit message to line-length limits Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230215171549.16305-1-alsp705@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/amd/display: Set dcn32 caps.seamless_odmHersen Wu1-0/+1
[ Upstream commit f9537b1fa7fb51c2162bc15ce469cbbf1ca0fbfe ] [Why & How] seamless_odm set was not picked up while merging commit 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled") Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled") Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915: Update vblank timestamping stuff on seamless M/N changeVille Syrjälä1-0/+8
[ Upstream commit 59ad01c786a4c94afacc7feb0ab97bf8d6672a46 ] When we change the M/N values seamlessly during a fastset we should also update the vblank timestamping stuff to make sure the vblank timestamp corrections/guesstimations come out exact. Note that only crtc_clock and framedur_ns can actually end up changing here during fastsets. Everything else we touch can only change during full modesets. Technically we should try to do this exactly at the start of vblank, but that would require some kind of double buffering scheme. Let's skip that for now and just update things right after the commit has been submitted to the hardware. This means the information will be properly up to date when the vblank irq handler goes to work. Only if someone ends up querying some vblanky stuff in between the commit and start of vblank may we see a slight discrepancy. Also this same problem really exists for the DRRS downclocking stuff. But as that is supposed to be more or less transparent to the user, and it only drops to low gear after a long delay (1 sec currently) we probably don't have to worry about it. Any time something is actively submitting updates DRRS will remain in high gear and so the timestamping constants will match the hardware state. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-1-ville.syrjala@linux.intel.com (cherry picked from commit 8cb1f95cca68421b08333175719fdd3615372ca8) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915: Fix format for perf_limit_reasonsVinay Belgaumkar1-1/+1
[ Upstream commit f8d62aa8d24d9883df738e450bfe6be396e11979 ] Use hex format so that it is easier to decode. Fixes: fe5979665f64 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230315022906.2467408-1-vinay.belgaumkar@intel.com (cherry picked from commit 5e008ba67cb80084e99b40ccd46f9029ae421632) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915/gt: perform uc late init after probe error injectionAndrzej Hajda1-2/+2
[ Upstream commit 150784f9285e656373cf3953ef4a7663f1e1a0f2 ] Probe pseudo errors should be injected only in places where real errors can be encountered, otherwise unwinding code can be broken. Placing intel_uc_init_late before i915_inject_probe_error violated this rule, resulting in following bug: __intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt)) Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS") Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com (cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915/guc: Fix missing ecodesJohn Harrison1-0/+22
[ Upstream commit 8df23e4c4f72f4e201c28e6fb0a67e2dbf30628a ] Error captures are tagged with an 'ecode'. This is a pseduo-unique magic number that is meant to distinguish similar seeming bugs with different underlying signatures. It is a combination of two ring state registers. Unfortunately, the register state being used is only valid in execlist mode. In GuC mode, the register state exists in a separate list of arbitrary register address/value pairs rather than the named entry structure. So, search through that list to find the two exciting registers and copy them over to the structure's named members. v2: if else if instead of if if (Alan) Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Fixes: a6f0f9cf330a ("drm/i915/guc: Plumb GuC-capture into gpu_coredump") Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-2-John.C.Harrison@Intel.com (cherry picked from commit 9724ecdbb9ddd6da3260e4a442574b90fc75188a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915/guc: Rename GuC register state capture node to be more obviousJohn Harrison2-5/+5
[ Upstream commit 583ebae783b8241a30581c084ad6226051b594c5 ] The GuC specific register state entry in the error capture object was just called 'capture'. Although the companion 'node' entry was called 'guc_capture_node'. Rename the base entry to be 'guc_capture' instead so that it is a) more consistent and b) more obvious what it is. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-9-John.C.Harrison@Intel.com Stable-dep-of: 8df23e4c4f72 ("drm/i915/guc: Fix missing ecodes") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915/mtl: Disable MC6 for MTL A stepBadal Nilawar4-48/+9
[ Upstream commit 088a422c3fa3ee9268d400078626b0c202cfe9dd ] The Wa_14017073508 require to send Media Busy/Idle mailbox while accessing Media tile. As of now it is getting handled while __gt_unpark, __gt_park. But there are various corner cases where forcewakes are taken without __gt_unpark i.e. without sending Busy Mailbox especially during register reads. Forcewakes are taken without busy mailbox leads to GPU HANG. So bringing mailbox calls under forcewake calls are no feasible option as forcewake calls are atomic and mailbox calls are blocking. The issue already fixed in B step so disabling MC6 on A step and reverting previous commit which handles Wa_14017073508 Fixes: 8f70f1ec587d ("drm/i915/mtl: Add Wa_14017073508 for SAMedia") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310061339.2495416-2-badal.nilawar@intel.com (cherry picked from commit 038a24835ab68f341eaa7a0e3bcc6ce0f9b22e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/i915/fbdev: lock the fbdev obj before vma pinTejas Upadhyay1-6/+18
[ Upstream commit ed00eba03474adbf525ff03d69705d8c78b76456 ] lock the fbdev obj before calling into i915_vma_pin_iomap(). This helps to solve below : <7>[ 93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <4>[ 93.581844] ------------[ cut here ]------------ <4>[ 93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915] Fixes: f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.") Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com (cherry picked from commit 561b31acfd65502a2cda2067513240fc57ccdbdc) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/amd/display: Fix DP MST sinks removal issueCruise Hung1-0/+9
[ Upstream commit cbd6c1b17d3b42b7935526a86ad5f66838767d03 ] [Why] In USB4 DP tunneling, it's possible to have this scenario that the path becomes unavailable and CM tears down the path a little bit late. So, in this case, the HPD is high but fails to read any DPCD register. That causes the link connection type to be set to sst. And not all sinks are removed behind the MST branch. [How] Restore the link connection type if it fails to read DPCD register. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cbd6c1b17d3b42b7935526a86ad5f66838767d03) Modified for stable backport as a lot of the code in this file was moved in 6.3 to drivers/gpu/drm/amd/display/dc/link/link_detection.c. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/amd/display: Remove OTG DIV register write for Virtual signals.Saaem Rizvi1-1/+1
[ Upstream commit 709671ffb15dcd1b4f6afe2a9d8c67c7c4ead4a1 ] [WHY] Hot plugging and then hot unplugging leads to k1 and k2 values to change, as signal is detected as a virtual signal on hot unplug. Writing these values to OTG_PIXEL_RATE_DIV register might cause primary display to blank (known hw bug). [HOW] No longer write k1 and k2 values to register if signal is virtual, we have safe guards in place in the case that k1 and k2 is unassigned so that an unknown value is not written to the register either. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30drm/amd/display: fix k1 k2 divider programming for phantom streamsAurabindo Pillai1-2/+2
[ Upstream commit 3b214bb7185d8284d7d4c53e15127f69a375abf6 ] [Why & How] When k1 and k2 divider programming logic is executed for a phantom stream, the corresponding master stream should be used for the calculation. Fix the if condition to use the master stream for checking signal type instead of the phantom stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: 709671ffb15d ("drm/amd/display: Remove OTG DIV register write for Virtual signals.") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/amd/display: Write to correct dirty_rectBenjamin Cheng1-3/+3
commit 751281c55579f0cb0e56c9797d4663f689909681 upstream. When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does not use the counter i. This causes the fill_dc_dity_rect() to always fill dirty_rects[0], causing graphical artifacts when a damage clip aware DRM client sends more than 1 damage clip. Instead, use the flip_addrs->dirty_rect_count which is incremented by fill_dc_dirty_rect() on a successful fill. Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amd/display: disconnect MPCC only on OTG changeAyush Gupta1-1/+5
commit 7304ee979b6b6422f41a1312391a5e505fc29ccd upstream. [Why] Framedrops are observed while playing Vp9 and Av1 10 bit video on 8k resolution using VSR while playback controls are disappeared/appeared [How] Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta <ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers1-3/+0
commit 56574f89dbd84004c3fd6485bcaafb5aa9b8be14 upstream. [WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amd/pm: bump SMU 13.0.4 driver_if header versionTim Huang2-3/+3
commit ab9bdb1213b4b40942af6a383f555d0c14874c1b upstream. Align the SMU driver interface version with PMFW to suppress the version mismatch message on driver loading. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSesGuilherme G. Piccoli1-0/+19
commit 542a56e8eb4467ae654eefab31ff194569db39cd upstream. The VCN firmware loading path enables the indirect SRAM mode if it's advertised as supported. We might have some cases of FW issues that prevents this mode to working properly though, ending-up in a failed probe. An example below, observed in the Steam Deck: [...] [drm] failed to load ucode VCN0_RAM(0x3A) [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000) amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110) [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110 amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init [...] Disabling the VCN block circumvents this, but it's a very invasive workaround that turns off the entire feature. So, let's add a quirk on VCN loading that checks for known problematic BIOSes on Vangogh, so we can proactively disable the indirect SRAM mode and allow the HW proper probe and VCN IP block to work fine. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385 Fixes: 82132ecc5432 ("drm/amdgpu: enable Vangogh VCN indirect sram mode") Cc: stable@vger.kernel.org Cc: James Zhu <James.Zhu@amd.com> Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amd/pm: Fix sienna cichlid incorrect OD volage after resumeBłażej Szczygieł1-10/+33
commit a9386ee9681585794dbab95d4ce6826f73d19af6 upstream. Always setup overdrive tables after resume. Preserve only some user-defined settings in user_overdrive_table if they're set. Copy restored user_overdrive_table into od_table to get correct values. On cold boot, BTC was triggered and GfxVfCurve was calibrated. We got VfCurve settings (a). On resuming back, BTC will be triggered again and GfxVfCurve will be recalibrated. VfCurve settings (b) got may be different from those of cold boot. So if we reuse those VfCurve settings (a) got on cold boot on suspend, we can run into discrepencies. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Błażej Szczygieł <mumei6102@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amdgpu: Don't resume IOMMU after incomplete initFelix Kuehling1-1/+10
commit f3921a9a641483784448fb982b2eb738b383d9b9 upstream. Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other kgd2kfd calls. This should fix IOMMU errors on resume from suspend when KFD IOMMU initialization failed. Reported-by: Matt Fagnani <matt.fagnani@bell.net> Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454 Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info> Cc: stable@vger.kernel.org Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Matt Fagnani <matt.fagnani@bell.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/i915/dg2: Add HDMI pixel clock frequencies 267.30 and 319.89 MHzAnkit Nautiyal1-0/+62
commit 46bc23dcd94569270d02c4c1f7e62ae01ebd53bb upstream. Add snps phy table values for HDMI pixel clocks 267.30 MHz and 319.89 MHz. Values are based on the Bspec algorithm for PLL programming for HDMI. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8008 Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230223043619.3941382-1-ankit.k.nautiyal@intel.com (cherry picked from commit d46746b8b13cbd377ffc733e465d25800459a31b) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/i915/active: Fix misuse of non-idle barriers as fence trackersJanusz Krzysztofik1-11/+14
commit e0e6b416b25ee14716f3549e0cbec1011b193809 upstream. Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333 Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org # v5.5 Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/sun4i: fix missing component unbind on bind errorsJohan Hovold1-2/+4
commit c22f2ff8724b49dce2ae797e9fbf4bc0fa91112f upstream. Make sure to unbind all subcomponents when binding the aggregate device fails. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Cc: stable@vger.kernel.org # 4.7 Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230306103242.4775-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/shmem-helper: Remove another errant put in error pathDmitry Osipenko1-3/+6
commit ee9adb7a45516cfa536ca92253d7ae59d56db9e4 upstream. drm_gem_shmem_mmap() doesn't own reference in error code path, resulting in the dma-buf shmem GEM object getting prematurely freed leading to a later use-after-free. Fixes: f49a51bfdc8e ("drm/shme-helpers: Fix dma_buf_mmap forwarding bug") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230108211311.3950107-1-dmitry.osipenko@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/edid: fix info leak when failing to get panel idJohan Hovold1-1/+1
commit 4d8457fe0eb9c80ff7795cf8a30962128b71d853 upstream. Make sure to clear the transfer buffer before fetching the EDID to avoid leaking slab data to the logs on errors that leave the buffer unchanged. Fixes: 69c7717c20cc ("drm/edid: Dump the EDID when drm_edid_get_panel_id() has an error") Cc: stable@vger.kernel.org # 6.2 Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230302074704.11371-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/ttm: Fix a NULL pointer dereferenceThomas Hellström1-1/+1
commit 9a9a8fe26751334b7739193a94eba741073b8a55 upstream. The LRU mechanism may look up a resource in the process of being removed from an object. The locking rules here are a bit unclear but it looks currently like res->bo assignment is protected by the LRU lock, whereas bo->resource is protected by the object lock, while *clearing* of bo->resource is also protected by the LRU lock. This means that if we check that bo->resource points to the LRU resource under the LRU lock we should be safe. So perform that check before deciding to swap out a bo. That avoids dereferencing a NULL bo->resource in ttm_bo_swapout(). Fixes: 6a9b02899402 ("drm/ttm: move the LRU into resource handling v4") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Qiang Yu <qiang.yu@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.19+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-2-thomas.hellstrom@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytesAlex Hung1-1/+4
[ Upstream commit 031f196d1b1b6d5dfcb0533b431e3ab1750e6189 ] [WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_finiHoratio Zhang1-3/+3
[ Upstream commit 23f4a2d29ba57bf88095f817de5809d427fcbe7e ] The call trace occurs when the amdgpu is removed after the mode1 reset. During mode1 reset, from suspend to resume, there is no need to reinitialize the ta firmware buffer which caused the bo pin_count increase redundantly. [ 489.885525] Call Trace: [ 489.885525] <TASK> [ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm] [ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu] [ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu] [ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu] [ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu] [ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0 [ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 489.886132] ? __pm_runtime_resume+0x60/0x90 [ 489.886134] pci_device_remove+0x3e/0xb0 [ 489.886135] __device_release_driver+0x1ab/0x2a0 [ 489.886137] driver_detach+0xf3/0x140 [ 489.886138] bus_remove_driver+0x6c/0xf0 [ 489.886140] driver_unregister+0x31/0x60 [ 489.886141] pci_unregister_driver+0x40/0x90 [ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu] Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Signed-off-by: longlyao <Longlong.Yao@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/amdkfd: Fix an illegal memory accessQu Huang1-6/+3
[ Upstream commit 4fc8fff378b2f2039f2a666d9f8c570f4e58352c ] In the kfd_wait_on_events() function, the kfd_event_waiter structure is allocated by alloc_event_waiters(), but the event field of the waiter structure is not initialized; When copy_from_user() fails in the kfd_wait_on_events() function, it will enter exception handling to release the previously allocated memory of the waiter structure; Due to the event field of the waiters structure being accessed in the free_waiters() function, this results in illegal memory access and system crash, here is the crash log: localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0 localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082 localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000 localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0 localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64 localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002 localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698 localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0 localhost kernel: Call Trace: localhost kernel: _raw_spin_lock_irqsave+0x30/0x40 localhost kernel: remove_wait_queue+0x12/0x50 localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu] localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu] localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: __x64_sys_ioctl+0x8e/0xd0 localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0 localhost kernel: do_syscall_64+0x33/0x80 localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 localhost kernel: RIP: 0033:0x152a4dff68d7 Allocate the structure with kcalloc, and remove redundant 0-initialization and a redundant loop condition check. Signed-off-by: Qu Huang <qu.huang@linux.dev> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/i915/sseu: fix max_subslices array-index-out-of-bounds accessAndrea Righi1-1/+1
[ Upstream commit 193c41926d152761764894f46e23b53c00186a82 ] It seems that commit bc3c5e0809ae ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format") exposed a potential out-of-bounds access, reported by UBSAN as following on a laptop with a gen 11 i915 card: UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27 index 6 is out of range for type 'u16 [6]' CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022 Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x3a __ubsan_handle_out_of_bounds.cold+0x42/0x47 gen11_compute_sseu_info+0x121/0x130 [i915] intel_sseu_info_init+0x15d/0x2b0 [i915] intel_gt_init_mmio+0x23/0x40 [i915] i915_driver_mmio_probe+0x129/0x400 [i915] ? intel_gt_probe_all+0x91/0x2e0 [i915] i915_driver_probe+0xe1/0x3f0 [i915] ? drm_privacy_screen_get+0x16d/0x190 [drm] ? acpi_dev_found+0x64/0x80 i915_pci_probe+0xac/0x1b0 [i915] ... According to the definition of sseu_dev_info, eu_mask->hsw is limited to a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but gen11_sseu_info_init() can potentially set 8 sub-slices, in the !IS_JSL_EHL(gt->i915) case. Fix this by reserving up to 8 slots for max_subslices in the eu_mask struct. Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Fixes: bc3c5e0809ae ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format") Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com (cherry picked from commit 3cba09a6ac86ea1d456909626eb2685596c07822) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/i915/psr: Use calculated io and fast wake linesJouni Högander2-17/+63
[ Upstream commit 71c602103c74b277bef3d20a308874a33ec8326d ] Currently we are using hardcoded 7 for io and fast wake lines. According to Bspec io and fast wake times are both 42us for DISPLAY_VER >= 12 and 50us and 32us for older platforms. Calculate line counts for these and configure them into PSR2_CTL accordingly Use 45 us for the fast wake calculation as 42 seems to be too tight based on testing. Bspec: 49274, 4289 Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 64cf40a125ff ("drm/i915/psr: Program default IO buffer Wake and Fast Wake") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com (cherry picked from commit cb42e8ede5b475c096e473b86c356b1158b4bc3b) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/meson: fix 1px pink line on GXM when scaling video overlayChristian Hewitt1-0/+2
[ Upstream commit 5c8cf1664f288098a971a1d1e65716a2b6a279e1 ] Playing media with a resolution smaller than the crtc size requires the video overlay to be scaled for output and GXM boards display a 1px pink line on the bottom of the scaled overlay. Comparing with the downstream vendor driver revealed VPP_DUMMY_DATA not being set [0]. Setting VPP_DUMMY_DATA prevents the 1px pink line from being seen. [0] https://github.com/endlessm/linux-s905x/blob/master/drivers/amlogic/amports/video.c#L7869 Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230303123312.155164-1-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/panfrost: Don't sync rpm suspension after mmu flushingDmitry Osipenko1-1/+1
[ Upstream commit ba3be66f11c3c49afaa9f49b99e21d88756229ef ] Lockdep warns about potential circular locking dependency of devfreq with the fs_reclaim caused by immediate device suspension when mapping is released by shrinker. Fix it by doing the suspension asynchronously. Reviewed-by: Steven Price <steven.price@arm.com> Fixes: ec7eba47da86 ("drm/panfrost: Rework page table flushing and runtime PM interaction") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-3-dmitry.osipenko@collabora.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/msm/gem: Prevent blocking within shrinker loopDmitry Osipenko2-4/+16
[ Upstream commit 9630b585b607bd26f505d34620b14d75b9a5af7d ] Consider this scenario: 1. APP1 continuously creates lots of small GEMs 2. APP2 triggers `drop_caches` 3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable GEMs 4. msm_gem_shrinker_scan() returns non-zero number of freed pages and causes shrinker to try shrink more 5. msm_gem_shrinker_scan() returns non-zero number of freed pages again, goto 4 6. The APP2 is blocked in `drop_caches` until APP1 stops producing purgeable GEMs To prevent this blocking scenario, check number of remaining pages that GPU shrinker couldn't release due to a GEM locking contention or shrinking rejection. If there are no remaining pages left to shrink, then there is no need to free up more pages and shrinker may break out from the loop. This problem was found during shrinker/madvise IOCTL testing of virtio-gpu driver. The MSM driver is affected in the same way. Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: b352ba54a820 ("drm/msm/gem: Convert to using drm_gem_lru") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22drm/virtio: Pass correct device to dma_sync_sgtable_for_device()Oleksandr Tyshchenko1-2/+2
[ Upstream commit a54bace095d00e9222161495649688bc43de4dde ] The "vdev->dev.parent" should be used instead of "vdev->dev" as a device for which to perform the DMA operation in both virtio_gpu_cmd_transfer_to_host_2d(3d). Because the virtio-gpu device "vdev->dev" doesn't really have DMA OPS assigned to it, but parent (virtio-pci or virtio-mmio) device "vdev->dev.parent" has. The more, the sgtable in question the code is trying to sync here was mapped for the parent device (by using its DMA OPS) previously at: virtio_gpu_object_shmem_init()->drm_gem_shmem_get_pages_sgt()-> dma_map_sgtable(), so should be synced here for the same parent device. Fixes: b5c9ed70d1a9 ("drm/virtio: Improve DMA API usage for shmem BOs") Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230224153450.526222-1-olekstysh@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17drm/amd/display: adjust MALL size available for DCN32 and DCN321Samson Tam5-5/+78
commit 235fef6c7fd341026eee90cc546e6e8ff8b2c315 upstream. [Why] MALL size available can vary for different SKUs. Use num_chans read from VBIOS to determine the available MALL size we can use [How] Define max_chans for DCN32 and DCN321. If num_chans is max_chans, then return max_chans as we can access the entire MALL space. Otherwise, define avail_chans as the number of available channels we are allowed instead. Return corresponding number of channels back and use this to calculate available MALL size. Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17drm/amd/display: Allow subvp on vactive pipes that are 2560x1440@60Alvin Lee2-1/+32
commit 2ebd1036209c2e7b61e6bc6e5bee4b67c1684ac6 upstream. Enable subvp on specifically 1440p@60hz displays even though it can switch in vactive. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4Veerabadhran Gopalakrishnan1-0/+1
[ Upstream commit 6ce2ea07c5ff0a8188eab0e5cd1f0e4899b36835 ] Added the video capability query support for VCN version 4_0_4 Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17drm/amdgpu/soc21: don't expose AV1 if VCN0 is harvestedAlex Deucher1-13/+48
[ Upstream commit a6de636eb04f146d23644dbbb7173e142452a9b7 ] Only VCN0 supports AV1. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: 6ce2ea07c5ff ("drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17drm/amdgpu: fix return value check in kfdShashank Sharma1-1/+1
[ Upstream commit 20534dbcc7b7bfb447279cdcfb0d88ee3b779a18 ] This patch fixes a return value check in kfd doorbell handling. This function should return 0(error) only when the ida_simple_get returns < 0(error), return > 0 is a success case. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed") Acked-by: Christian Koenig <chriatian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-16 14:59:28 +0300