summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2020-12-30drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()Zwane Mwaikambo1-1/+1
commit 73b62cdb93b68d7e2c1d373c6a411bc00c53e702 upstream. I observed this when unplugging a DP monitor whilst a computer is asleep and then waking it up. This left DP chardev nodes still being present on the filesystem and accessing these device nodes caused an oops because drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened. This can also be reproduced by creating a device node with mknod(1) and issuing an open(2) [166164.933198] BUG: kernel NULL pointer dereference, address: 0000000000000018 [166164.933202] #PF: supervisor read access in kernel mode [166164.933204] #PF: error_code(0x0000) - not-present page [166164.933205] PGD 0 P4D 0 [166164.933208] Oops: 0000 [#1] PREEMPT SMP NOPTI [166164.933211] CPU: 4 PID: 99071 Comm: fwupd Tainted: G W 5.8.0-rc6+ #1 [166164.933213] Hardware name: LENOVO 20RD002VUS/20RD002VUS, BIOS R16ET25W (1.11 ) 04/21/2020 [166164.933232] RIP: 0010:drm_dp_aux_dev_get_by_minor+0x29/0x70 [drm_kms_helper] [166164.933234] Code: 00 0f 1f 44 00 00 55 48 89 e5 41 54 41 89 fc 48 c7 c7 60 01 a4 c0 e8 26 ab 30 d7 44 89 e6 48 c7 c7 80 01 a4 c0 e8 47 94 d6 d6 <8b> 50 18 49 89 c4 48 8d 78 18 85 d2 74 33 8d 4a 01 89 d0 f0 0f b1 [166164.933236] RSP: 0018:ffffb7d7c41cbbf0 EFLAGS: 00010246 [166164.933237] RAX: 0000000000000000 RBX: ffff8a90001fe900 RCX: 0000000000000000 [166164.933238] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffffc0a40180 [166164.933239] RBP: ffffb7d7c41cbbf8 R08: 0000000000000000 R09: ffff8a93e157d6d0 [166164.933240] R10: 0000000000000000 R11: ffffffffc0a40188 R12: 0000000000000003 [166164.933241] R13: ffff8a9402200e80 R14: ffff8a90001fe900 R15: 0000000000000000 [166164.933244] FS: 00007f7fb041eb00(0000) GS:ffff8a9411500000(0000) knlGS:0000000000000000 [166164.933245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [166164.933246] CR2: 0000000000000018 CR3: 00000000352c2003 CR4: 00000000003606e0 [166164.933247] Call Trace: [166164.933264] auxdev_open+0x1b/0x40 [drm_kms_helper] [166164.933278] chrdev_open+0xa7/0x1c0 [166164.933282] ? cdev_put.part.0+0x20/0x20 [166164.933287] do_dentry_open+0x161/0x3c0 [166164.933291] vfs_open+0x2d/0x30 [166164.933297] path_openat+0xb27/0x10e0 [166164.933306] ? atime_needs_update+0x73/0xd0 [166164.933309] do_filp_open+0x91/0x100 [166164.933313] ? __alloc_fd+0xb2/0x150 [166164.933316] do_sys_openat2+0x210/0x2d0 [166164.933318] do_sys_open+0x46/0x80 [166164.933320] __x64_sys_openat+0x20/0x30 [166164.933328] do_syscall_64+0x52/0xc0 [166164.933336] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (gdb) disassemble drm_dp_aux_dev_get_by_minor+0x29 Dump of assembler code for function drm_dp_aux_dev_get_by_minor: 0x0000000000017b10 <+0>: callq 0x17b15 <drm_dp_aux_dev_get_by_minor+5> 0x0000000000017b15 <+5>: push %rbp 0x0000000000017b16 <+6>: mov %rsp,%rbp 0x0000000000017b19 <+9>: push %r12 0x0000000000017b1b <+11>: mov %edi,%r12d 0x0000000000017b1e <+14>: mov $0x0,%rdi 0x0000000000017b25 <+21>: callq 0x17b2a <drm_dp_aux_dev_get_by_minor+26> 0x0000000000017b2a <+26>: mov %r12d,%esi 0x0000000000017b2d <+29>: mov $0x0,%rdi 0x0000000000017b34 <+36>: callq 0x17b39 <drm_dp_aux_dev_get_by_minor+41> 0x0000000000017b39 <+41>: mov 0x18(%rax),%edx <========= 0x0000000000017b3c <+44>: mov %rax,%r12 0x0000000000017b3f <+47>: lea 0x18(%rax),%rdi 0x0000000000017b43 <+51>: test %edx,%edx 0x0000000000017b45 <+53>: je 0x17b7a <drm_dp_aux_dev_get_by_minor+106> 0x0000000000017b47 <+55>: lea 0x1(%rdx),%ecx 0x0000000000017b4a <+58>: mov %edx,%eax 0x0000000000017b4c <+60>: lock cmpxchg %ecx,(%rdi) 0x0000000000017b50 <+64>: jne 0x17b76 <drm_dp_aux_dev_get_by_minor+102> 0x0000000000017b52 <+66>: test %edx,%edx 0x0000000000017b54 <+68>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93> 0x0000000000017b56 <+70>: test %ecx,%ecx 0x0000000000017b58 <+72>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93> 0x0000000000017b5a <+74>: mov $0x0,%rdi 0x0000000000017b61 <+81>: callq 0x17b66 <drm_dp_aux_dev_get_by_minor+86> 0x0000000000017b66 <+86>: mov %r12,%rax 0x0000000000017b69 <+89>: pop %r12 0x0000000000017b6b <+91>: pop %rbp 0x0000000000017b6c <+92>: retq 0x0000000000017b6d <+93>: xor %esi,%esi 0x0000000000017b6f <+95>: callq 0x17b74 <drm_dp_aux_dev_get_by_minor+100> 0x0000000000017b74 <+100>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74> 0x0000000000017b76 <+102>: mov %eax,%edx 0x0000000000017b78 <+104>: jmp 0x17b43 <drm_dp_aux_dev_get_by_minor+51> 0x0000000000017b7a <+106>: xor %r12d,%r12d 0x0000000000017b7d <+109>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74> End of assembler dump. (gdb) list *drm_dp_aux_dev_get_by_minor+0x29 0x17b39 is in drm_dp_aux_dev_get_by_minor (drivers/gpu/drm/drm_dp_aux_dev.c:65). 60 static struct drm_dp_aux_dev *drm_dp_aux_dev_get_by_minor(unsigned index) 61 { 62 struct drm_dp_aux_dev *aux_dev = NULL; 63 64 mutex_lock(&aux_idr_mutex); 65 aux_dev = idr_find(&aux_idr, index); 66 if (!kref_get_unless_zero(&aux_dev->refcount)) 67 aux_dev = NULL; 68 mutex_unlock(&aux_idr_mutex); 69 (gdb) p/x &((struct drm_dp_aux_dev *)(0x0))->refcount $8 = 0x18 Looking at the caller, checks on the minor are pushed down to drm_dp_aux_dev_get_by_minor() static int auxdev_open(struct inode *inode, struct file *file) { unsigned int minor = iminor(inode); struct drm_dp_aux_dev *aux_dev; aux_dev = drm_dp_aux_dev_get_by_minor(minor); <==== if (!aux_dev) return -ENODEV; file->private_data = aux_dev; return 0; } Fixes: e94cb37b34eb ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Zwane Mwaikambo <zwane@yosper.io> Reviewed-by: Lyude Paul <lyude@redhat.com> [added Cc to stable] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2010122231070.38717@montezuma.home Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()Yang Yingliang1-0/+1
[ Upstream commit 723ae803218da993143387bf966042eccefac077 ] Return -ENOMEM when allocating refill memory failed. Fixes: 71e8831f6407 ("drm/omap: DMM/TILER support for OMAP4+ platform") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201117061045.3452287-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm/msm/dsi_pll_10nm: restore VCO rate during restore_stateDmitry Baryshkov1-0/+8
[ Upstream commit a4ccc37693a271330a46208afbeaed939d54fdbb ] PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly") Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm/tve200: Fix handling of platform_get_irq() errorKrzysztof Kozlowski1-2/+2
[ Upstream commit 77bb5aaf2bb8180e7d1bb70b4df306f511707a7d ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 179c02fe90a4 ("drm/tve200: Add new driver for TVE200") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-2-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm/gma500: fix double free of gma_connectorTom Rix1-1/+1
[ Upstream commit 4e19d51ca5b28a1d435a844c7b2a8e1b1b6fa237 ] clang static analysis reports this problem: cdv_intel_dp.c:2101:2: warning: Attempt to free released memory kfree(gma_connector); ^~~~~~~~~~~~~~~~~~~~ In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off() fails, the handler calls cdv_intel_dp_destroy(connector) which does the first free of gma_connector. So adjust the goto label and skip the second free. Fixes: d112a8163f83 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201003193928.18869-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm/tegra: sor: Disable clocks on error in tegra_sor_init()Qinglang Miao1-2/+8
[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ] Fix the missing clk_disable_unprepare() before return from tegra_sor_init() in the error handling case. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm/tegra: replace idr_init() by idr_init_base()Deepak R Varma1-1/+1
[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ] idr_init() uses base 0 which is an invalid identifier for this driver. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused. References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong1-3/+4
commit a34a0a632dd991a371fec56431d73279f9c54029 upstream drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine [sudip: use old functions before rename] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30drm/xen-front: Fix misused IS_ERR_OR_NULL checksOleksandr Andrushchenko3-6/+6
commit 14dee058610446aa464254fc5c8e88c7535195e0 upstream The patch c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend" from Apr 3, 2018, leads to the following static checker warning: drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create() warn: passing zero to 'ERR_CAST' drivers/gpu/drm/xen/xen_drm_front_gem.c 133 struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev, 134 size_t size) 135 { 136 struct xen_gem_object *xen_obj; 137 138 xen_obj = gem_create(dev, size); 139 if (IS_ERR_OR_NULL(xen_obj)) 140 return ERR_CAST(xen_obj); Fix this and the rest of misused places with IS_ERR_OR_NULL in the driver. Fixes: c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend" Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02drm/atomic_helper: Stop modesets on unregistered connectors harderLyude Paul4-31/+30
commit de9f8eea5a44b0b756d3d6345af7f8e630a3c8c0 upstream. Unfortunately, it appears our fix in: commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com (cherry picked from commit 39b50c603878f4f8ae541ac4088a805d588abc79) Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Fixes: 34ca26a98ad6 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: stable@vger.kernel.org Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24drm/sun4i: dw-hdmi: fix error return code in sun8i_dw_hdmi_bind()Xiongfeng Wang1-0/+1
[ Upstream commit 6654b57866b98230a270953dd34f67de17ab1708 ] Fix to return a negative error code from the error handling case instead of 0 in function sun8i_dw_hdmi_bind(). Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/1605488969-5211-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18drm/gma500: Fix out-of-bounds access to struct drm_device.vblank[]Thomas Zimmermann1-22/+12
commit 06ad8d339524bf94b89859047822c31df6ace239 upstream. The gma500 driver expects 3 pipelines in several it's IRQ functions. Accessing struct drm_device.vblank[], this fails with devices that only have 2 pipelines. An example KASAN report is shown below. [ 62.267688] ================================================================== [ 62.268856] BUG: KASAN: slab-out-of-bounds in psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.269450] Read of size 1 at addr ffff8880012bc6d0 by task systemd-udevd/285 [ 62.269949] [ 62.270192] CPU: 0 PID: 285 Comm: systemd-udevd Tainted: G E 5.10.0-rc1-1-default+ #572 [ 62.270807] Hardware name: /DN2800MT, BIOS MTCDT10N.86A.0164.2012.1213.1024 12/13/2012 [ 62.271366] Call Trace: [ 62.271705] dump_stack+0xae/0xe5 [ 62.272180] print_address_description.constprop.0+0x17/0xf0 [ 62.272987] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.273474] __kasan_report.cold+0x20/0x38 [ 62.273989] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.274460] kasan_report+0x3a/0x50 [ 62.274891] psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.275380] drm_irq_install+0x131/0x1f0 <...> [ 62.300751] Allocated by task 285: [ 62.301223] kasan_save_stack+0x1b/0x40 [ 62.301731] __kasan_kmalloc.constprop.0+0xbf/0xd0 [ 62.302293] drmm_kmalloc+0x55/0x100 [ 62.302773] drm_vblank_init+0x77/0x210 Resolve the issue by only handling vblank entries up to the number of CRTCs. I'm adding a Fixes tag for reference, although the bug has been present since the driver's initial commit. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 5c49fd3aa0ab ("gma500: Add the core DRM files and headers") Cc: Alan Cox <alan@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org#v3.3+ Link: https://patchwork.freedesktop.org/patch/msgid/20201105190256.3893-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18drm/amd/pm: do not use ixFEATURE_STATUS for checking smc runningEvan Quan1-4/+1
[ Upstream commit 786436b453001dafe81025389f96bf9dac1e9690 ] This reverts commit f87812284172a9809820d10143b573d833cd3f75 ("drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume"). It was intended to fix Hawaii S4(hibernation) issue but break S3. As ixFEATURE_STATUS is filled with garbage data on resume which can be only cleared by reloading smc firmware(but that will involve many changes). So, we will revert this S4 fix and seek a new way. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18drm/amd/pm: perform SMC reset on suspend/hibernationEvan Quan5-0/+39
[ Upstream commit 277b080f98803cb73a83fb234f0be83a10e63958 ] So that the succeeding resume can be performed based on a clean state. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18drm/amdgpu: perform srbm soft reset always on SDMA resumeEvan Quan1-15/+12
[ Upstream commit 253475c455eb5f8da34faa1af92709e7bb414624 ] This can address the random SDMA hang after pci config reset seen on Hawaii. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
[ Upstream commit 9ce0af3e9573fb84c4c807183d13ea2a68271e4b ] There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10drm/i915: Break up error capture compression loops with cond_resched()Chris Wilson1-0/+3
commit 7d5553147613b50149238ac1385c60e5c7cacb34 upstream. As the error capture will compress user buffers as directed to by the user, it can take an arbitrary amount of time and space. Break up the compression loops with a call to cond_resched(), that will allow other processes to schedule (avoiding the soft lockups) and also serve as a warning should we try to make this loop atomic in the future. Testcase: igt/gem_exec_capture/many-* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk (cherry picked from commit 293f43c80c0027ff9299036c24218ac705ce584e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/ttm: fix eviction valuable range check.Dave Airlie1-1/+1
commit fea456d82c19d201c21313864105876deabe148b upstream. This was adding size to start, but pfn and start are in pages, so it should be using num_pages. Not sure this fixes anything in the real world, just noticed it during refactoring. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20201019222257.1684769-2-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/display: Don't invoke kgdb_breakpoint() unconditionallyTakashi Iwai1-1/+1
commit 8b7dc1fe1a5c1093551f6cd7dfbb941bd9081c2e upstream. ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdgpu: don't map BO in reserved regionMadhav Chauhan1-0/+10
commit c4aa8dff6091cc9536aeb255e544b0b4ba29faf4 upstream. 2MB area is reserved at top inside VM. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/i915: Force VT'd workarounds when running as a guest OSChris Wilson1-1/+5
commit 8195400f7ea95399f721ad21f4d663a62c65036f upstream. If i915.ko is being used as a passthrough device, it does not know if the host is using intel_iommu. Mixing the iommu and gfx causes a few issues (such as scanout overfetch) which we need to workaround inside the driver, so if we detect we are running under a hypervisor, also assume the device access is being virtualised. Reported-by: Stefan Fritsch <sf@sfritsch.de> Suggested-by: Stefan Fritsch <sf@sfritsch.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Stefan Fritsch <sf@sfritsch.de> Cc: stable@vger.kernel.org Tested-by: Stefan Fritsch <sf@sfritsch.de> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk (cherry picked from commit f566fdcd6cc49a9d5b5d782f56e3e7cb243f01b8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/display: HDMI remote sink need mode validation for LinuxFangzhi Zuo1-1/+1
[ Upstream commit 95d620adb48f7728e67d82f56f756e8d451cf8d2 ] [Why] Currently mode validation is bypassed if remote sink exists. That leads to mode set issue when a BW bottle neck exists in the link path, e.g., a DP-to-HDMI converter that only supports HDMI 1.4. Any invalid mode passed to Linux user space will cause the modeset failure due to limitation of Linux user space implementation. [How] Mode validation is skipped only if in edid override. For real remote sink, clock limit check should be done for HDMI remote sink. Have HDMI related remote sink going through mode validation to elimiate modes which pixel clock exceeds BW limitation. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drm/bridge/synopsys: dsi: add support for non-continuous HS clockAntonio Borneo1-2/+7
[ Upstream commit c6d94e37bdbb6dfe7e581e937a915ab58399b8a5 ] Current code enables the HS clock when video mode is started or to send out a HS command, and disables the HS clock to send out a LP command. This is not what DSI spec specify. Enable HS clock either in command and in video mode. Set automatic HS clock management for panels and devices that support non-continuous HS clock. Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701194234.18123-1-yannick.fertre@st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctlyNadezda Lutovinova1-2/+10
[ Upstream commit f688a345f0d7a6df4dd2aeca8e4f3c05e123a0ee ] If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr, then a null pointer dereference is accessed. The patch adds checking of the return value of ge_b850v3_lvds_init(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30Fix use after free in get_capset_info callback.Doug Horn2-3/+9
[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ] If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets. Signed-off-by: Doug Horn <doughorn@google.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29drm/gma500: fix error checkTom Rix1-1/+1
[ Upstream commit cdd296cdae1af2d27dae3fcfbdf12c5252ab78cf ] Reviewing this block of code in cdv_intel_dp_init() ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ... cdv_intel_edp_panel_vdd_off(gma_encoder); if (ret == 0) { /* if this fails, presume the device is a ghost */ DRM_INFO("failed to retrieve link info, disabling eDP\n"); drm_encoder_cleanup(encoder); cdv_intel_dp_destroy(connector); goto err_priv; } else { The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure. So change to <= Fixes: d112a8163f83 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14drm/amdgpu: prevent double kfree ttm->sgPhilip Yang1-0/+1
[ Upstream commit 1d0e16ac1a9e800598dcfa5b6bc53b704a103390 ] Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14drm/nouveau/mem: guard against NULL pointer access in mem_delKarol Herbst1-0/+2
commit d10285a25e29f13353bbf7760be8980048c1ef2f upstream. other drivers seems to do something similar Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-2-kherbst@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07drm/sun4i: mixer: Extend regmap max_registerMartin Cerveny1-1/+1
[ Upstream commit 74ea06164cda81dc80e97790164ca533fd7e3087 ] Better guess. Secondary CSC registers are from 0xF0000. Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-3-m.cerveny@computer.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_configJean Delvare1-1/+1
commit a39d0d7bdf8c21ac7645c02e9676b5cb2b804c31 upstream. A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation. Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: stable@vger.kernel.org Cc: Navid Emamdoost <navid.emamdoost@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01drm/sun4i: sun8i-csc: Secondary CSC register correctionMartin Cerveny1-1/+1
[ Upstream commit cab4c03b4ba54c8d9378298cacb8bc0fd74ceece ] "Allwinner V3s" has secondary video layer (VI). Decoded video is displayed in wrong colors until secondary CSC registers are programmed correctly. Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library") Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-2-m.cerveny@computer.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/vc4/vc4_hdmi: fill ASoC card ownerMarek Szyprowski1-0/+1
[ Upstream commit ec653df2a0cbc306a4bfcb0e3484d318fa779002 ] card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amdkfd: fix a memory leak issueDennis Li1-0/+2
[ Upstream commit 087d764159996ae378b08c0fdd557537adfd6899 ] In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/nouveau/dispnv50: fix runtime pm imbalance on errorDinghao Liu1-1/+3
[ Upstream commit dc455f4c888365595c0a13da445e092422d55b8d ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/nouveau: fix runtime pm imbalance on errorDinghao Liu1-1/+3
[ Upstream commit d7372dfb3f7f1602b87e0663e8b8646da23ebca7 ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/nouveau/debugfs: fix runtime pm imbalance on errorDinghao Liu1-1/+4
[ Upstream commit 00583fbe8031f69bba8b0a9a861efb75fb7131af ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01PCI: Use ioremap(), not phys_to_virt() for platform ROMMikel Rychliski3-26/+52
[ Upstream commit 72e0ef0e5f067fd991f702f0b2635d911d0cf208 ] On some EFI systems, the video BIOS is provided by the EFI firmware. The boot stub code stores the physical address of the ROM image in pdev->rom. Currently we attempt to access this pointer using phys_to_virt(), which doesn't work with CONFIG_HIGHMEM. On these systems, attempting to load the radeon module on a x86_32 kernel can result in the following: BUG: unable to handle page fault for address: 3e8ed03c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2 Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS MP11.88Z.005C.B08.0707021221 07/02/07 EIP: radeon_get_bios+0x5ed/0xe50 [radeon] Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06 EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000 ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206 CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0 Call Trace: r520_init+0x26/0x240 [radeon] radeon_device_init+0x533/0xa50 [radeon] radeon_driver_load_kms+0x80/0x220 [radeon] drm_dev_register+0xa7/0x180 [drm] radeon_pci_probe+0x10f/0x1a0 [radeon] pci_device_probe+0xd4/0x140 Fix the issue by updating all drivers which can access a platform provided ROM. Instead of calling the helper function pci_platform_rom() which uses phys_to_virt(), call ioremap() directly on the pdev->rom. radeon_read_platform_bios() previously directly accessed an __iomem pointer. Avoid this by calling memcpy_fromio() instead of kmemdup(). pci_platform_rom() now has no remaining callers, so remove it. Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/msm/a5xx: Always set an OPP supported hardware valueJordan Crouse1-7/+20
[ Upstream commit 0478b4fc5f37f4d494245fe7bcce3f531cf380e9 ] If the opp table specifies opp-supported-hw as a property but the driver has not set a supported hardware value the OPP subsystem will reject all the table entries. Set a "default" value that will match the default table entries but not conflict with any possible real bin values. Also fix a small memory leak and free the buffer allocated by nvmem_cell_read(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/msm: fix leaks if initialization failsPavel Machek1-2/+4
[ Upstream commit 66be340f827554cb1c8a1ed7dea97920b4085af2 ] We should free resources in unlikely case of allocation failure. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amd/display: Stop if retimer is not availableRodrigo Siqueira1-38/+29
[ Upstream commit a0e40018dcc3f59a10ca21d58f8ea8ceb1b035ac ] Raven provides retimer feature support that requires i2c interaction in order to make it work well, all settings required for this configuration are loaded from the Atom bios which include the i2c address. If the retimer feature is not available, we should abort the attempt to set this feature, otherwise, it makes the following line return I2C_CHANNEL_OPERATION_NO_RESPONSE: i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); ... if (!i2c_success) ASSERT(i2c_success); This ends up causing problems with hotplugging HDMI displays on Raven, and causes retimer settings to warn like so: WARNING: CPU: 1 PID: 429 at drivers/gpu/drm/amd/amdgpu/../dal/dc/core/dc_link.c:1998 write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Modules linked in: edac_mce_amd ccp kvm irqbypass binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel amdgpu(+) snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi aesni_intel snd_seq amd_iommu_v2 gpu_sched aes_x86_64 crypto_simd cryptd glue_helper snd_seq_device ttm drm_kms_helper snd_timer eeepc_wmi wmi_bmof asus_wmi sparse_keymap drm mxm_wmi snd k10temp fb_sys_fops syscopyarea sysfillrect sysimgblt soundcore joydev input_leds mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 igb i2c_algo_bit hid_generic usbhid i2c_piix4 dca ahci hid libahci video wmi gpio_amdpt gpio_generic CPU: 1 PID: 429 Comm: systemd-udevd Tainted: G W 5.2.0-rc1sept162019+ #1 Hardware name: System manufacturer System Product Name/ROG STRIX B450-F GAMING, BIOS 2605 08/06/2019 RIP: 0010:write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Code: ff 0f b6 4d ce 44 0f b6 45 cf 44 0f b6 c8 45 89 cf 44 89 e2 48 c7 c6 f0 34 bc c0 bf 04 00 00 00 e8 63 b0 90 ff 45 84 ff 75 02 <0f> 0b 42 0f b6 04 73 8d 50 f6 80 fa 02 77 8c 3c 0a 0f 85 c8 00 00 RSP: 0018:ffffa99d02726fd0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa99d02727035 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff976acc857440 RBP: ffffa99d02727018 R08: 0000000000000002 R09: 000000000002a600 R10: ffffe90610193680 R11: 00000000000005e3 R12: 000000000000005d R13: ffff976ac4b201b8 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f14f99e1680(0000) GS:ffff976acc840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdf212843b8 CR3: 0000000408906000 CR4: 00000000003406e0 Call Trace: core_link_enable_stream+0x626/0x680 [amdgpu] dce110_apply_ctx_to_hw+0x414/0x4e0 [amdgpu] dc_commit_state+0x331/0x5e0 [amdgpu] ? drm_calc_timestamping_constants+0xf9/0x150 [drm] amdgpu_dm_atomic_commit_tail+0x395/0x1e00 [amdgpu] ? dm_plane_helper_prepare_fb+0x20c/0x280 [amdgpu] commit_tail+0x42/0x70 [drm_kms_helper] drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper] amdgpu_dm_atomic_commit+0x95/0xa0 [amdgpu] drm_atomic_commit+0x4a/0x50 [drm] restore_fbdev_mode_atomic+0x1c0/0x1e0 [drm_kms_helper] restore_fbdev_mode+0x4c/0x160 [drm_kms_helper] ? _cond_resched+0x19/0x40 drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] fbcon_init+0x471/0x630 visual_init+0xd5/0x130 do_bind_con_driver+0x20a/0x430 do_take_over_console+0x7d/0x1b0 do_fbcon_takeover+0x5c/0xb0 fbcon_event_notify+0x6cd/0x8a0 notifier_call_chain+0x4c/0x70 blocking_notifier_call_chain+0x43/0x60 fb_notifier_call_chain+0x1b/0x20 register_framebuffer+0x254/0x360 __drm_fb_helper_initial_config_and_unlock+0x2c5/0x510 [drm_kms_helper] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] amdgpu_fbdev_init+0xcd/0x100 [amdgpu] amdgpu_device_init+0x1156/0x1930 [amdgpu] amdgpu_driver_load_kms+0x8d/0x2e0 [amdgpu] drm_dev_register+0x12b/0x1c0 [drm] amdgpu_pci_probe+0xd3/0x160 [amdgpu] local_pci_probe+0x47/0xa0 pci_device_probe+0x142/0x1b0 really_probe+0xf5/0x3d0 driver_probe_device+0x11b/0x130 device_driver_attach+0x58/0x60 __driver_attach+0xa3/0x140 ? device_driver_attach+0x60/0x60 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x74/0xb0 ? kmem_cache_alloc_trace+0x1a3/0x1c0 driver_attach+0x1e/0x20 bus_add_driver+0x147/0x220 ? 0xffffffffc0cb9000 driver_register+0x60/0x100 ? 0xffffffffc0cb9000 __pci_register_driver+0x5a/0x60 amdgpu_init+0x74/0x83 [amdgpu] do_one_initcall+0x4a/0x1fa ? _cond_resched+0x19/0x40 ? kmem_cache_alloc_trace+0x3f/0x1c0 ? __vunmap+0x1cc/0x200 do_init_module+0x5f/0x227 load_module+0x2330/0x2b40 __do_sys_finit_module+0xfc/0x120 ? __do_sys_finit_module+0xfc/0x120 __x64_sys_finit_module+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f14f9500839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9bc4f5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055afb5abce30 RCX: 00007f14f9500839 RDX: 0000000000000000 RSI: 000055afb5ace0f0 RDI: 0000000000000017 RBP: 000055afb5ace0f0 R08: 0000000000000000 R09: 000000000000000a R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000 R13: 000055afb5aad800 R14: 0000000000020000 R15: 0000000000000000 ---[ end trace c286e96563966f08 ]--- This commit reworks the way that we handle i2c write for retimer in the way that we abort this configuration if the feature is not available in the device. For debug sake, we kept a simple log message in case the retimer is not available. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amdgpu: increase atombios cmd timeoutJohn Clements1-2/+2
[ Upstream commit 1b3460a8b19688ad3033b75237d40fa580a5a953 ] mitigates race condition on BACO reset between GPU bootcode and driver reload Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amd/display: dal_ddc_i2c_payloads_create can fail causing panicAric Cyr1-27/+25
[ Upstream commit 6a6c4a4d459ecacc9013c45dcbf2bc9747fdbdbd ] [Why] Since the i2c payload allocation can fail need to check return codes [How] Clean up i2c payload allocations and check for errors Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/omap: fix possible object reference leakWen Yang1-1/+3
[ Upstream commit 47340e46f34a3b1d80e40b43ae3d7a8da34a3541 ] The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amdgpu/powerplay/smu7: fix AVFS handling with custom powerplay tableAlex Deucher1-0/+7
[ Upstream commit 901245624c7812b6c95d67177bae850e783b5212 ] When a custom powerplay table is provided, we need to update the OD VDDC flag to avoid AVFS being enabled when it shouldn't be. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/amdgpu/powerplay: fix AVFS handling with custom powerplay tableAlex Deucher1-0/+7
[ Upstream commit 53dbc27ad5a93932ff1892a8e4ef266827d74a0f ] When a custom powerplay table is provided, we need to update the OD VDDC flag to avoid AVFS being enabled when it shouldn't be. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01gma/gma500: fix a memory disclosure bug due to uninitialized bytesKangjie Lu1-0/+2
[ Upstream commit 57a25a5f754ce27da2cfa6f413cfd366f878db76 ] `best_clock` is an object that may be sent out. Object `clock` contains uninitialized bytes that are copied to `best_clock`, which leads to memory disclosure and information leak. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191018042953.31099-1-kjlu@umn.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()Yu Kuai1-8/+18
[ Upstream commit 0680a622318b8d657323b94082f4b9a44038dfee ] if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23drm/mediatek: Add exception handing in mtk_drm_probe() if component init failYu Kuai1-1/+6
[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ] mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17drm/msm: Disable preemption on all 5xx targetsJordan Crouse1-1/+2
commit 7b3f3948c8b7053d771acc9f79810cc410f5e2e0 upstream. Temporarily disable preemption on a5xx targets pending some improvements to protect the RPTR shadow from being corrupted. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17drm/tve200: Stabilize enable/disableLinus Walleij1-1/+21
commit f71800228dc74711c3df43854ce7089562a3bc2d upstream. The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo. This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ. This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-21 02:33:16 +0300