| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 771d6539f27bd55f43d8a95d53a7eeaaffa2681c ]
The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.
Fixes: fb10dc451c0f ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 902973dc1a049c0d7bf0c222b8f2b3876f01b4a2 ]
Same as the xRGB8888 formats, HVS5 has managed to swap the colour
channels for the xRGB1555 formats as well. Add the relevant
config for pixel_order_hvs5.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87551ec650bb87d35f1b29bba6a2430896e08da0 ]
HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-4-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 982ee94486863a41c6af9f2ab3f6681f72bc5c48 ]
The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX
has been repurposed on HVS5 to configure whether a display can
win back-to-back arbitration wins for the COB.
This is not desirable, therefore only select this bit on HVS4,
and explicitly clear it on HVS5.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-3-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df993fced230daa8452892406f3180c93ebf7e7b ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1284365e3e8cc33849f90cae20bca36fd7544e24 ]
The HVS Composite Output Buffer (COB) is the memory used to
generate the output pixel data.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
In testing triple screen support it has been noted that only
1 line was being assigned to HVS channel 2. Whilst that is fine
for the transposer (TXP), and indeed needed as only some pixels
have an alpha channel, it is insufficient to run a live display.
Split the COB more evenly between the 3 HVS channels.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-1-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 479d4f0be4237ba33bc9432787aeb62c90e30f95 ]
If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock
happened in the locking context. This situation should be addressed by
dropping all currently held locks and block until the contended lock
becomes available. Currently, vc4 is not dealing with the deadlock
properly, producing the following output when PROVE_LOCKING is enabled:
[ 825.612809] ------------[ cut here ]------------
[ 825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.613458] Modules linked in: 8021q mrp garp stp llc
raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211
btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec
clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill
drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng
rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6
[ 825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G W 6.1.0-rc6-01399-g941aae326315 #3
[ 825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 825.613777] Workqueue: events output_poll_execute [drm_kms_helper]
[ 825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.614829] sp : ffff800008313bf0
[ 825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000
[ 825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758
[ 825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001
[ 825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3
[ 825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000
[ 825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002
[ 825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800
[ 825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054
[ 825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10
[ 825.615219] Call trace:
[ 825.615232] drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.615773] drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.616003] output_poll_execute+0xe4/0x224 [drm_kms_helper]
[ 825.616233] process_one_work+0x2b4/0x618
[ 825.616264] worker_thread+0x24c/0x464
[ 825.616288] kthread+0xec/0x110
[ 825.616310] ret_from_fork+0x10/0x20
[ 825.616335] irq event stamp: 7634
[ 825.616349] hardirqs last enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78
[ 825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0
[ 825.616411] softirqs last enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6]
[ 825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6]
[ 825.617586] ---[ end trace 0000000000000000 ]---
Therefore, deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221229194638.178712-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0870d86eac8a9abd89a0be1b719d5dc5bac936f0 ]
The mapping is incorrect for RGB565_1X16 as it should be
DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3.
Fixes: 08302c35b59d ("drm/vc4: Add DPI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
extreme reduced blanking
The formula that determines the core clock requirement based on pixel
clock and blanking has been determined experimentally to minimise the
clock while supporting all modes we've seen.
A new reduced blanking mode (4kp60 at 533MHz rather than the standard
594MHz) has been seen that doesn't produce a high enough clock and
results in "flip_done timed out" error.
Increase the setup cost in the formula to make this work. The result is
a reduced blanking mode increases by up to 7MHz while leaving the
standard timing
mode untouched
Link: https://github.com/raspberrypi/linux/issues/4446
Fixes: 16e101051f32 ("drm/vc4: Increase the core clock based on HVS load")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127145558.446123-1-maxime@cerno.tech
|
|
Issue is some displays go blank at the point of firmware to kms
handover. Plugging/unplugging hdmi cable, power cycling display, or
switching standby off/on
typically resolve this case.
Finally managed to find a display that suffers from this, and track down
the issue.
The firmware uses AVMUTE in normal operation. It will set AVMUTE before
disabling hdmi clocks and phy. It will clear AVMUTE after clocks and phy
are set up for a new hdmi mode.
But with the hdmi handover from firmware to kms, AVMUTE will be set by
firmware.
kms driver typically has no GCP packet (except for deep colour modes).
The spec isn't clear on whether to consider the AVMUTE as continuing
indefinitely in the absence of a GCP packet, or to consider that state
to have ended.
Most displays behave as we want, but there are a number (from multiple
manufacturers) which need to see AVMUTE cleared before displaying a
picture.
Lets just always enable GCP packet with AVMUTE cleared. That resolves
the issue on problematic displays.
From HDMI 1.4 spec:
A CD field of zero (Color Depth not indicated) shall be used whenever
the Sink does not indicate support for Deep Color. This value may
also be used in Deep Color mode to transmit a GCP indicating only
non-Deep Color information (e.g. AVMUTE).
So use CD=0 where we were previously not enabling a GCP.
Link: https://forum.libreelec.tv/thread/24780-le-10-0-1-rpi4-no-picture-after-update-from-le-10-0-0
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127161219.457058-1-maxime@cerno.tech
|
|
YUV images can either be presented as one allocation with offsets
for the different planes, or multiple allocations with 0 offsets.
The driver only ever calls drm_fb_[dma|cma]_get_gem_obj with plane
index 0, therefore any application using the second approach was
incorrectly rendered.
Correctly determine the address for each plane, removing the
assumption that the base address is the same for each.
Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127155708.454704-1-maxime@cerno.tech
|
|
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/dcf1db75-d9cc-62cc-fa12-baf1b2b3bf31@xs4all.nl
|
|
Commit 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
Remove that variable.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113154637.1704116-1-maxime@cerno.tech
|
|
Commit 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") converted,
among other functions, vc4_create_object() to use drmm_mutex_init().
However, that function is used to allocate a BO, and therefore the
mutex needs to be freed much sooner than when the DRM device is removed
from the system.
For each buffer allocation we thus end up allocating a small structure
as part of the DRM-managed mechanism that is never freed, eventually
leading us to no longer having any free memory anymore.
Let's switch back to mutex_init/mutex_destroy to deal with it properly.
Fixes: 374146cad469 ("drm/vc4: Switch to drmm_mutex_init")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230112091243.490799-1-maxime@cerno.tech
|
|
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Commit 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug") introduced
the vc4_hdmi_reset_link() function. This function dereferences the
"connector" pointer before checking whether it is NULL or not.
Rework variable assignment to avoid this issue.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20221110134752.238820-3-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Simplify vc4_hdmi_supports_scrambling() by changing its first parameter
from struct drm_encoder to struct vc4_hdmi.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20221110134752.238820-2-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The drm_atomic_get_new_private_obj_state() function returns NULL
on error path, drm_atomic_get_old_private_obj_state() function
returns NULL on error path, too, they does not return error pointers.
By the way, vc4_hvs_get_new/old_global_state() should return
ERR_PTR(-EINVAL), otherwise there will be null-ptr-defer issue,
such as follows:
In function vc4_atomic_commit_tail():
|-- old_hvs_state = vc4_hvs_get_old_global_state(state); <-- return NULL
|-- if (WARN_ON(IS_ERR(old_hvs_state))) <-- no return
|-- unsigned long state_rate = max(old_hvs_state->core_clock_rate,
new_hvs_state->core_clock_rate); <-- null-ptr-defer
Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110094445.2930509-6-cuigaosheng1@huawei.com
|
|
A problem about modprobe vc4 failed is triggered with the following log
given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting...
[ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16
modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
fails, it returns without unregistering all the vc4 drivers, resulting the
vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com
|
|
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: locking improvements
- firmware: New API in the RaspberryPi firmware driver used by vc4
Core Changes:
- client: Null pointer dereference fix in drm_client_buffer_delete()
- mm/buddy: Add back random seed log
- ttm: Convert ttm_resource to use size_t for its size, fix for an
undefined behaviour
Driver Changes:
- bridge:
- adv7511: use dev_err_probe
- it6505: Fix return value check of pm_runtime_get_sync
- panel:
- sitronix: Fixes and clean-ups
- lcdif: Increase DMA burst size
- rockchip: runtime_pm improvements
- vc4: Fix for a regression preventing the use of 4k @ 60Hz, and
further HDMI rate constraints check.
- vmwgfx: Cursor improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103083437.ksrh3hcdvxaof62l@houat
|
|
Commit ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at
runtime_resume") reintroduced the call to clk_set_min_rate in an attempt
to fix the boot without a monitor connected on the RaspberryPi3.
However, that introduced a regression breaking the display output
entirely (black screen but no vblank timeout) on the Pi4.
This is due to the fact that we now have in a typical modeset at boot,
in vc4_hdmi_encoder_pre_crtc_configure(), we have a first call to
clk_set_min_rate() asking for the minimum rate of the HSM clock for our
given resolution, and then a call to pm_runtime_resume_and_get(). We
will thus execute vc4_hdmi_runtime_resume() which, since the commit
mentioned above, will call clk_set_min_rate() a second time with the
absolute minimum rate we want to enforce on the HSM clock.
We're thus effectively erasing the minimum mandated by the mode we're
trying to set. The fact that only the Pi4 is affected is due to the fact
that it uses a different clock driver that tries to minimize the HSM
clock at all time. It will thus lower the HSM clock rate to 120MHz on
the second clk_set_min_rate() call.
The Pi3 doesn't use the same driver and will not change the frequency on
the second clk_set_min_rate() call since it's still within the new
boundaries and it doesn't have the code to minimize the clock rate as
needed. So even though the boundaries are still off, the clock rate is
still the right one for our given mode, so everything works.
There is a lot of moving parts, so I couldn't find any obvious
solution:
- Reverting the original is not an option, as that would break the Pi3
again.
- We can't move the clk_set_min_rate() call in _pre_crtc_configure()
since because, on the Pi3, the HSM clock has the CLK_SET_RATE_GATE
flag which prevents the clock rate from being changed after it's
been enabled. Our calls to clk_set_min_rate() can change it, so they
need to be done before clk_prepare_enable().
- We can't remove the call to clk_prepare_enable() from the
runtime_resume hook to put it into _pre_crtc_configure() either,
since we need that clock to be enabled to access the registers, and
we can't count on the fact that the display will be active in all
situations (doing any CEC operation, or listing the modes while
inactive are valid for example()).
- We can't drop the call to clk_set_min_rate() in
_pre_crtc_configure() since we would need to still enforce the
minimum rate for a given resolution, and runtime_resume doesn't have
access to the current mode, if there's any.
- We can't copy the TMDS character rate into vc4_hdmi and reuse it
since, because it's part of the KMS atomic state, it needs to be
protected by a mutex. Unfortunately, some functions (CEC operations,
mostly) can be reentrant (through the CEC framework) and still need
a pm_runtime_get.
However, we can work around this issue by leveraging the fact that the
clk_set_min_rate() calls set boundaries for its given struct clk, and
that each different clk_get() call will return a different instance of
struct clk. The clock framework will then aggregate the boundaries for
each struct clk instances linked to a given clock, plus its hardware
boundaries, and will use that.
We can thus get an extra HSM clock user for runtime_pm use only, and use
our different clock instances depending on the context: runtime_pm will
use its own to set the absolute minimum clock setup so that we never
lock the CPU waiting for a register access, and the modeset part will
set its requirement for the current resolution. And we let the CCF do
the coordination.
It's not an ideal solution, but it's fairly unintrusive and doesn't
really change any part of the logic so it looks like a rather safe fix.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2136234
Fixes: ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at runtime_resume")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221021131339.2203291-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
A comment introduced by commit 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link
on hotplug") mentions a drm_atomic_helper_connector_hdmi_reset_link()
function that was part of the earlier versions but got moved internally
and is now named vc4_hdmi_reset_link(). Let's fix the function name.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
We access some fields protected by our internal mutex in
vc4_hdmi_reset_link() (saved_adjusted_mode, output_bpc, output_format)
and are calling functions that need to have that lock taken
(vc4_hdmi_supports_scrambling()).
However, the current code doesn't lock that mutex. Let's make sure it
does.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Following the clock rate range improvements to the clock framework,
trying to set a disjoint range on a clock will now result in an error.
Thus, we can't set a minimum rate higher than the maximum reported by
the firmware, or clk_set_min_rate() will fail.
Thus we need to clamp the rate we are about to ask for to the maximum
rate possible on that clock.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-7-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
At least the 4096x2160@60Hz mode requires some overclocking that isn't
available by default, even if hdmi_enable_4kp60 is enabled.
Let's add some logic to detect whether we can satisfy the core clock
requirements for that mode, and prevent it from being used otherwise.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-6-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
In order to support higher HDMI frequencies, users have to set the
hdmi_enable_4kp60 parameter in their config.txt file.
This will have the side-effect of raising the maximum of the core clock,
tied to the HVS, and managed by the HVS driver.
However, we are querying this in the HDMI driver by poking into the HVS
structure to get our struct clk handle.
Let's make this part of the HVS bind implementation to have all the core
clock related setup in the same place.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-5-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
In order to support higher HDMI frequencies, users have to set the
hdmi_enable_4kp60 parameter in their config.txt file.
We were detecting this so far by calling clk_round_rate() on the core
clock with the frequency we're supposed to run at when one of those
modes is enabled. Whether or not the parameter was enabled could then be
inferred by the returned rate since the maximum clock rate reported by
the firmware was one of the side effect of setting that parameter.
However, the recent clock rework we did changed what clk_round_rate()
was returning to always return the minimum allowed, and thus this test
wasn't reliable anymore.
Let's use the new clk_get_max_rate() function to reliably determine the
maximum rate allowed on that clock and fix the 4k@60Hz output.
Fixes: e9d6cea2af1c ("clk: bcm: rpi: Run some clocks at the minimum rate allowed")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-4-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- connector: Send hotplug event on cleanup
- edid: logging/debug improvements
- plane_helper: Improve tests
Driver Changes:
- bridge:
- it6505: Synchronization improvements
- panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- nouveau: Fix page-fault handling
- vmwgfx: fb and cursor refactoring, convert to generic hashtable
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027073407.c2tlaczvzjrnzazi@houat
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
- Documentation for page-flip flags
Cross-subsystem Changes:
- dma-buf: Add unlocked variant of vmapping and attachment-mapping
functions
Core Changes:
- atomic-helpers: CRTC primary plane test fixes
- connector: TV API consistency improvements, cmdline parsing
improvements
- crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper
- edid: Fixes for HFVSDB parsing,
- fourcc: Addition of the Vivante tiled modifier
- makefile: Sort and reorganize the objects files
- mode_config: Remove fb_base from drm_mode_config_funcs
- sched: Add a module parameter to change the scheduling policy,
refcounting fix for fences
- tests: Sort the Kunit tests in the Makefile, improvements to the
DP-MST tests
- ttm: Remove unnecessary drm_mm_clean() call
Driver Changes:
- New driver: ofdrm
- Move all drivers to a common dma-buf locking convention
- bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
- ast: Atomic Gamma LUT Support, Convert to SHMEM, various
improvements
- lcdif: Support for YUV planes
- mgag200: Fix PLL Setup on some revisions
- udl: Modesetting improvements, hot-unplug support
- vc4: Fix support for PAL-M
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
|
|
There are a couple of spelling mistakes in DRM_DEBUG messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021084035.65367-1-colin.i.king@gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* vc4: HDMI fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y0gGdlujszCstDeP@linux-uq9g
|
|
Backmerging to get v6.1-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
If our HSM clock has not been properly initialized, any register access
will silently lock up the system.
Let's check that this can't happen by adding a check for the rate before
any register access, and error out otherwise.
Link: https://lore.kernel.org/dri-devel/20220922145448.w3xfywkn5ecak2et@pengutronix.de/
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929-rpi-pi3-unplugged-fixes-v1-2-cd22e962296c@cerno.tech
|
|
This is a revert of commit fd5894fa2413 ("drm/vc4: hdmi: Remove clock
rate initialization"), with the code slightly moved around.
It turns out that we can't downright remove that code from the driver,
since the Pi0-3 and Pi4 are in different cases, and it only works for
the Pi4.
Indeed, the commit mentioned above was relying on the RaspberryPi
firmware clocks driver to initialize the rate if it wasn't done by the
firmware. However, the Pi0-3 are using the clk-bcm2835 clock driver that
wasn't doing this initialization. We therefore end up with the clock not
being assigned a rate, and the CPU stalling when trying to access a
register.
We can't move that initialization in the clk-bcm2835 driver, since the
HSM clock we depend on is actually part of the HDMI power domain, so any
rate setup is only valid when the power domain is enabled. Thus, we
reinstated the minimum rate setup at runtime_suspend, which should
address both issues.
Link: https://lore.kernel.org/dri-devel/20220922145448.w3xfywkn5ecak2et@pengutronix.de/
Fixes: fd5894fa2413 ("drm/vc4: hdmi: Remove clock rate initialization")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929-rpi-pi3-unplugged-fixes-v1-1-cd22e962296c@cerno.tech
|
|
The VC4 HDMI controller driver relies on the HDMI codec ASoC driver. In
order to set it up properly, in vc4_hdmi_audio_init(), our HDMI driver
will register a device matching the HDMI codec driver, and then register
an ASoC card using that codec.
However, if vc4 is compiled as a module, chances are that the hdmi-codec
driver will be too. In such a case, the module loader will have a very
narrow window to load the module between the device registration and the
card registration.
If it fails to load the module in time, the card registration will fail
with EPROBE_DEFER, and we'll abort the audio initialisation,
unregistering the HDMI codec device in the process.
The next time the bind callback will be run, it's likely that we end up
missing that window again, effectively preventing vc4 to probe entirely.
In order to prevent this, we can create a soft dependency of the vc4
driver on the HDMI codec one so that we're sure the HDMI codec will be
loaded before the VC4 module is, and thus we'll never end up in the
previous situation.
Fixes: 91e99e113929 ("drm/vc4: hdmi: Register HDMI codec")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902144111.3424560-1-maxime@cerno.tech
|
|
PAL-M is a Brazilian analog TV standard that uses a PAL-style chroma
subcarrier at 3.575611[888111] MHz on top of 525-line (480i60) timings.
This commit makes the driver actually use the proper VEC preset for this
mode instead of just changing PAL subcarrier frequency.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-25-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
ambiguity
We currently have two sets of TV properties.
The first one is there to deal with analog TV properties, creating
properties such as the TV mode, subconnectors, saturation, hue and so on.
It's created by calling the drm_mode_create_tv_properties() function.
The second one is there to deal with properties that might be useful on a
TV, creating the overscan margins for example. It's created by calling the
drm_mode_create_tv_margin_properties().
However, we also have a drm_atomic_helper_connector_tv_reset() function
that will reset the TV margin properties to their default values, and thus
is supposed to be called for the latter set. This creates an ambiguity due
to the inconsistent naming.
We can thus rename the drm_atomic_helper_connector_tv_reset() function to
drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity
and hopefully make it more obvious.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-4-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
We need 6.0-rc1 to merge the backlight rework PR.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
During a hotplug cycle (such as a TV going out of suspend, or when the
cable is disconnected and reconnected), the expectation is that the same
state used before the disconnection is reused until the next commit.
However, the HDMI scrambling requires that some flags are set in the
monitor, and those flags are very likely to be reset when the cable has
been disconnected. This will thus result in a blank display, even if the
display pipeline configuration hasn't been modified or is in the exact
same state.
The solution we've had so far is to enable the scrambling-related bits
again on reconnection, but the HDMI 2.0 specification (Section 6.1.3.1 -
Scrambling Control) requires that the scrambling enable bit is set
before sending any scrambled video signal. Using that solution thus
breaks that expectation.
The solution used by i915 is to do a full modeset on the connector so
that we disable the video signal, enable the scrambling bit, and enable
the video signal again.
As such, we took that code and plugged it into vc4. It probably could
have been turned into an helper, but it proved to be difficult for
several reasons:
* i915 has fairly different structures than simpler KMS drivers such
as vc4, so doing some code that works with both proved to be
difficult;
* Other simpler drivers could reuse some of it (tegra, dw-hdmi), but
it would still require to move some parameters currently stored in
private structure that are needed to compute whether the scrambling
is needed or not, and then inform the driver that it needs to be
enabled. Some of those parameters are already in core structures
(drm_display_mode, drm_display_info, bpc), but the output format
isnt't. Adding it is fairly challenging since unlike the TMDS char
rate or mode, there's no consensus on what format to pick in
drivers, so it's not possible to write some generic code that can
depend on it.
For these reasons, we chose to duplicate the code for now, until someone
else really needs it as well, in which case we will be able to convert
it into a generic helper.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-8-maxime@cerno.tech
|
|
We'll need it earlier in the driver, so let's move it next to the other
scrambling-related helpers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-7-maxime@cerno.tech
|
|
We'll need the locking context in future patch, so let's convert .detect
to .detect_ctx.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-6-maxime@cerno.tech
|
|
Our detect callback has a bunch of operations to perform depending on
the current and last status of the connector, such a setting the CEC
physical address or enabling the scrambling again.
This is currently dealt with a bunch of if / else statetements that make
it fairly difficult to read and extend.
Let's move all that logic to a function of its own.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-5-maxime@cerno.tech
|
|
We recently introduced a new mutex to protect concurrent execution of
ALSA and KMS hooks, and the concurrent access to some of vc4_hdmi
fields.
However, using it in the detect hook was creating a reentrency issue
with CEC code. Indeed, calling cec_s_phys_addr_from_edid from detect
might call the CEC adap_enable hook with the lock held, eventually
resulting in a deadlock.
Since we didn't really need to protect anything at the moment in the CEC
code, the decision was made to ignore the mutex in those CEC hooks,
working around the issue.
However, we can have the same thing happening if we end up triggering a
mode set from the detect callback, for example using
drm_atomic_helper_connector_hdmi_reset_link().
Since we don't really need to protect anything in detect either, let's
just drop the lock in detect, and add it again in CEC.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-4-maxime@cerno.tech
|
|
Even though vc4_hdmi_supports_scrambling takes a mode as an argument, it
never uses it. Let's remove it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-3-maxime@cerno.tech
|
|
We don't modify the drm_display_mode pointer we have in the driver in
most places, so let's make them const.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220829134731.213478-2-maxime@cerno.tech
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1-rc1:
[airlied - fix sun4i_tv build]
UAPI Changes:
- Hide unregistered connectors from GETCONNECTOR ioctl.
- drm/virtio no longer advertises LINEAR modifier, as it doesn't work.
-
Cross-subsystem Changes:
- Fix GPF in udmabuf failure path.
Core Changes:
- Rework TTM placement to use intersect/compatible functions.
- Drop legacy DP-MST support.
- More DP-MST related fixes, and move all state into atomic.
- Make DRM_MIPI_DBI select DRM_KMS_HELPER.
- Add audio_infoframe packing for DP.
- Add logging when some atomic check functions fail.
- Assorted documentation updates and fixes.
Driver Changes:
- Assorted cleanups and fixes in msm, lcdif, nouveau, virtio,
panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via,
bochs, qxl, sun4i.
- Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels.
- Improve DP-MST modeset state handling in amdgpu, nouveau, i915.
- Drop DP-MST from radeon driver, it was broken and only user of legacy
DP-MST.
- Handle unplugging better in vc4.
- Simplify drm cmdparser tests.
- Add DP support to ti-sn65dsi86.
- Add MT8195 DP support to mediatek.
- Support RGB565, XRGB64, and ARGB64 formats in vkms.
- Convert sun4i tv support to atomic.
- Refactor vc4/vec TV Modesetting, and fix timings.
- Use atomic helpers instead of simple display helpers in ssd130x.
Maintainer changes:
- Add Douglas Anderson as reviewer for panel-edp.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com
|
|
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech
|
|
Let's remove the superfluous tv_mode field, which was redundant with the
mode field in struct drm_tv_connector_state.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-27-459522d653a7@cerno.tech
|
|
Change the mode_set function pointer logic to declarative config0,
config1 and custom_freq fields, to make TV mode setting logic more
concise and uniform.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
[Maxime: Fixed != 0 check, added tv_mode variable]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-26-459522d653a7@cerno.tech
|
