summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4
AgeCommit message (Collapse)AuthorFilesLines
2020-11-23drm/vc4: kms: Don't disable the muxing of an active CRTCMaxime Ripard2-36/+48
The current HVS muxing code will consider the CRTCs in a given state to setup their muxing in the HVS, and disable the other CRTCs muxes. However, it's valid to only update a single CRTC with a state, and in this situation we would mux out a CRTC that was enabled but left untouched by the new state. Fix this by setting a flag on the CRTC state when the muxing has been changed, and only change the muxing configuration when that flag is there. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-3-maxime@cerno.tech
2020-11-23drm/vc4: kms: Store the unassigned channel list in the stateMaxime Ripard2-25/+102
If a CRTC is enabled but not active, and that we're then doing a page flip on another CRTC, drm_atomic_get_crtc_state will bring the first CRTC state into the global state, and will make us wait for its vblank as well, even though that might never occur. Instead of creating the list of the free channels each time atomic_check is called, and calling drm_atomic_get_crtc_state to retrieve the allocated channels, let's create a private state object in the main atomic state, and use it to store the available channels. Since vc4 has a semaphore (with a value of 1, so a lock) in its commit implementation to serialize all the commits, even the nonblocking ones, we are free from the use-after-free race if two subsequent commits are not ran in their submission order. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-2-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Disable Wifi FrequenciesMaxime Ripard2-0/+29
There's cross-talk on the RPi4 between the 2.4GHz channels used by the WiFi chip and some resolutions, most notably 1440p at 60Hz. In such a case, we can either reject entirely the mode, or lower slightly the pixel frequency to remove the overlap. Let's go for the latter. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201029134018.1948636-2-maxime@cerno.tech
2020-11-19drm/vc4: kms: Document the muxing corner casesMaxime Ripard1-0/+22
We've had a number of muxing corner-cases with specific ways to reproduce them, so let's document them to make sure they aren't lost and introduce regressions later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105135656.383350-6-maxime@cerno.tech
2020-11-19drm/vc4: kms: Split the HVS muxing check in a separate functionMaxime Ripard1-3/+15
The code that assigns HVS channels during atomic_check is starting to grow a bit big, let's move it into a separate function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105135656.383350-5-maxime@cerno.tech
2020-11-19drm/vc4: kms: Rename NUM_CHANNELSMaxime Ripard1-3/+3
The NUM_CHANNELS define has a pretty generic name and was right before the function using it. Let's move to something that makes the hardware-specific nature more obvious, and to a more appropriate place. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105135656.383350-4-maxime@cerno.tech
2020-11-19drm/vc4: kms: Remove useless defineMaxime Ripard1-1/+0
NUM_OUTPUTS isn't used anymore, let's remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105135656.383350-3-maxime@cerno.tech
2020-11-19drm/vc4: kms: Switch to drmm_add_action_or_resetMaxime Ripard1-2/+2
Even though it was pointed in the review by Daniel, and I thought to have fixed it while applying the patches, but it turns out I forgot to commit the fixes in the process. Properly fix it this time. Fixes: dcda7c28bff2 ("drm/vc4: kms: Add functions to create the state objects") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105135656.383350-2-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Block odd horizontal timingsMaxime Ripard2-0/+15
The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels per clock cycle, and cannot deal with odd timings. Let's reject any mode with such timings. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-2-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Make sure our clock rate is within limitsMaxime Ripard1-0/+15
The HDMI controller cannot go above a certain pixel rate limit depending on the generations, but that limit is only enforced in mode_valid at the moment, which means that we won't advertise modes that exceed that limit, but the userspace is still free to try to setup a mode that would. Implement atomic_check to make sure we check it in that scenario too. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-1-maxime@cerno.tech
2020-11-03drm/vc4: drv: Remove unused variableMaxime Ripard1-1/+0
The commit dcda7c28bff2 ("drm/vc4: kms: Add functions to create the state objects") removed the last users of the vc4 variable, but didn't remove that variable resulting in a warning. Fixes: dcda7c28bff2 ("drm/vc4: kms: Add functions to create the state objects") Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201102162908.1436567-1-maxime@cerno.tech
2020-11-02drm/vc4: kms: Add functions to create the state objectsMaxime Ripard2-24/+57
In order to make the vc4_kms_load code and error path a bit easier to read and extend, add functions to create state objects, and use managed actions to cleanup if needed. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-6-maxime@cerno.tech
2020-11-02drm/vc4: Use devm_drm_dev_allocMaxime Ripard5-32/+25
We can simplify a bit the bind code, its error path and unbind by using the managed devm_drm_dev_alloc function. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-5-maxime@cerno.tech
2020-11-02drm/vc4: Use the helper to retrieve vc4_dev when neededMaxime Ripard2-3/+3
We have a helper to retrieve the vc4_dev structure from the drm_device one when needed, so let's use it consistently. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-4-maxime@cerno.tech
2020-11-02drm/vc4: gem: Add a managed action to cleanup the job queueMaxime Ripard3-10/+10
The job queue needs to be cleaned up using vc4_gem_destroy, but it's not used consistently (vc4_drv's bind calls it in its error path, but doesn't in unbind), and we can make that automatic through a managed action. Let's remove the requirement to call vc4_gem_destroy. Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-3-maxime@cerno.tech
2020-11-02drm/vc4: drv: Use managed drm_mode_config_initMaxime Ripard1-4/+3
Using drmm_mode_config_init instead of drm_mode_config_init allows us to cleanup a bit the error path. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-2-maxime@cerno.tech
2020-11-02drm/vc4: bo: Add a managed action to cleanup the cacheMaxime Ripard3-4/+4
The BO cache needs to be cleaned up using vc4_bo_cache_destroy, but it's not used consistently (vc4_drv's bind calls it in its error path, but doesn't in unbind), and we can make that automatic through a managed action. Let's remove the requirement to call vc4_bo_cache_destroy. Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-1-maxime@cerno.tech
2020-10-29drm/vc4: Rework the structure conversion functionsMaxime Ripard1-6/+6
Most of the helpers to retrieve vc4 structures from the DRM base structures rely on the fact that the first member of the vc4 structure is the DRM one and just cast the pointers between them. However, this is pretty fragile especially since there's no check to make sure that the DRM structure is indeed at the offset 0 in the structure, so let's use container_of to make it more robust. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
2020-10-29drm/vc4: hdmi: Add a name to the codec DAI componentMaxime Ripard1-0/+1
Since the components for a given device in ASoC are identified by their name, it makes sense to add one even though it's not strictly necessary. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
2020-10-28drm/vc4: hdmi: Avoid sleeping in atomic contextMaxime Ripard1-2/+3
When running the trigger hook, ALSA by default will take a spinlock, and thus will run the trigger hook in atomic context. However, our HDMI driver will send the infoframes as part of the trigger hook, and part of that process is to wait for a bit to be cleared for up to 100ms. To be nicer to the system, that wait has some usleep_range that interact poorly with the atomic context. There's several ways we can fix this, but the more obvious one is to make ALSA take a mutex instead by setting the nonatomic flag on the DAI link. That doesn't work though, since now the cyclic callback installed by the dmaengine helpers in ALSA will take a mutex, while that callback is run by dmaengine's virt-chan code in a tasklet where sleeping is not allowed either. Given the delay we need to poll the bit for, changing the usleep_range for a udelay and keep running it from a context where interrupts are disabled is not really a good option either. However, we can move the infoframe setup code in the hw_params hook, like is usually done in other HDMI controllers, that isn't protected by a spinlock and thus where we can sleep. Infoframes will be sent on a regular basis anyway, and since hw_params is where the audio parameters that end up in the infoframes are setup, this also makes a bit more sense. Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201027101558.427256-1-maxime@cerno.tech
2020-10-27drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-1006/+3140
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-09-25drm/vc4: crtc: Keep the previously assigned HVS FIFOMaxime Ripard3-6/+19
The HVS FIFOs are currently assigned each time we have an atomic_check for all the enabled CRTCs. However, if we are running multiple outputs in parallel and we happen to disable the first (by index) CRTC, we end up changing the assigned FIFO of the second CRTC without disabling and reenabling the pixelvalve which ends up in a stall and eventually a VBLANK timeout. In order to fix this, we can create a special value for our assigned channel to mark it as disabled, and if our CRTC already had an assigned channel in its previous state, we keep on using it. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-2-maxime@cerno.tech
2020-09-25drm/vc4: crtc: Rework a bit the CRTC state codeMaxime Ripard1-3/+10
The current CRTC state reset hook in vc4 allocates a vc4_crtc_state structure as a drm_crtc_state, and relies on the fact that vc4_crtc_state embeds drm_crtc_state as its first member, and therefore can be safely cast. However, this is pretty fragile especially since there's no check for this in place, and we're going to need to access vc4_crtc_state member at reset so this looks like a good occasion to make it more robust. Fixes: 6d6e50039187 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-1-maxime@cerno.tech
2020-09-23drm/vc4: kms: Assign a FIFO to enabled CRTCs instead of activeMaxime Ripard1-1/+1
The HVS has three FIFOs that can be assigned to a number of PixelValves through a mux. However, changing that FIFO requires that we disable and then enable the pixelvalve, so we want to assign FIFOs to all the enabled CRTCs, and not just the active ones. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918145918.101068-1-maxime@cerno.tech
2020-09-21drm/vc4: hvs: Pull the state of all the CRTCs prior to PV muxingMaxime Ripard1-0/+17
The vc4 display engine has a first controller called the HVS that will perform the composition of the planes. That HVS has 3 FIFOs and can therefore compose planes for up to three outputs. The timings part is generated through a component called the Pixel Valve, and the BCM2711 has 6 of them. Thus, the HVS has some bits to control which FIFO gets output to which Pixel Valve. The current code supports that muxing by looking at all the CRTCs in a new DRM atomic state in atomic_check, and given the set of constraints that we have, assigns FIFOs to CRTCs or reject the mode entirely. The actual muxing will occur during atomic_commit. However, that doesn't work if only a fraction of the CRTCs' state is updated in that state, since it will ignore the CRTCs that are kept running unmodified, and will thus unassign its associated FIFO, and later disable it. In order to make the code work as expected, let's pull the CRTC state of all the enabled CRTC in our atomic_check so that we can operate on all the running CRTCs, no matter whether they are affected by the new state or not. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
2020-09-16drm/vc4: Handing the return value of drm_universal_plane_initTian Tao1-0/+2
Handing the return value of drm_universal_plane_init to fix the following W=1 kernel build warning(s): vc4_plane.c: In function ‘vc4_plane_init’: vc4_plane.c:1340:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
2020-09-11drm/vc4: Fix bitwise OR versus ternary operator in vc4_plane_mode_setNathan Chancellor1-2/+2
Clang warns: drivers/gpu/drm/vc4/vc4_plane.c:901:27: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around the '|' expression to silence this warning fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around the '?:' expression to evaluate it first fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~~^ 1 warning generated. Add the parentheses as that was clearly intended, otherwise SCALER5_CTL2_ALPHA_PREMULT won't be added to the list. Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1150 Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910171831.4112580-1-natechancellor@gmail.com
2020-09-11drm/vc4: Update type of reg parameter in vc4_hdmi_{read,write}Nathan Chancellor1-2/+2
Clang warns 100+ times in the vc4 driver along the lines of: drivers/gpu/drm/vc4/vc4_hdmi_phy.c:518:13: warning: implicit conversion from enumeration type 'enum vc4_hdmi_field' to different enumeration type 'enum vc4_hdmi_regs' [-Wenum-conversion] HDMI_WRITE(HDMI_TX_PHY_POWERDOWN_CTL, ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ The HDMI_READ and HDMI_WRITE macros pass in enumerators of type vc4_hdmi_field but vc4_hdmi_write and vc4_hdmi_read expect a enumerator of type vc4_hdmi_regs, causing a warning for every instance of this. Update the parameter type so there is no more mismatch. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1149 Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910170401.3857250-1-natechancellor@gmail.com
2020-09-10drm/vc4: hdmi: Fix NULL vs IS_ERR() checks in vc5_hdmi_init_resources()Dan Carpenter1-16/+16
The devm_ioremap() function never returns error pointers, it returns NULL. Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910100825.GC79916@mwanda
2020-09-10drm/vc4: hdmi: Fix off by ones in vc4_hdmi_read/write()Dan Carpenter1-2/+2
The variant->registers[] has ->num_registers elements so the > comparison needs to be changes to >= to prevent an out of bounds access. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910100748.GA79916@mwanda
2020-09-09drm/vc4/vc4_hdmi: fill ASoC card ownerMarek Szyprowski1-0/+1
card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com
2020-09-07drm/vc4: drv: Support BCM2711Maxime Ripard4-13/+40
The BCM2711 has a reworked display pipeline, and the load tracker needs some adjustment to operate properly. Let's add a compatible for BCM2711 and disable the load tracker until properly supported. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/beac4f9ef0261bca731a0402c8354e9af740519c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Support the BCM2711 HDMI controllersMaxime Ripard5-0/+1004
Now that the driver is ready for it, let's bring in the HDMI controllers variants for the BCM2711. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b540c7a9ebb7ad51da39271a8388b69c7e27e582.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add pixel BVB clock controlHoegeun Kwon2-0/+24
The BCM2711 has another clock that needs to be ramped up depending on the pixel rate: the pixel BVB clock. Add the code to adjust that clock when changing the mode. [Maxime: Changed the commit log, used clk_set_min_rate] Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20200901040759.29992-3-hoegeun.kwon@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/d757ddd6549da140f178563e5fd2bf1d129913fd.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Switch to blank pixels when disabledMaxime Ripard2-0/+12
In order to avoid pixels getting stuck in an unflushable FIFO, we need when we disable the HDMI controller to switch away from getting our pixels from the pixelvalve and instead use blank pixels, and switch back to the pixelvalve when we enable the HDMI controller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/fde3efb1ad79f4476a73d310cbba3ec07dc6dabe.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Do the VID_CTL configuration at onceMaxime Ripard1-8/+6
The VID_CTL setup is done in several places in the driver even though it's not really required. Let's simplify it a bit to do the configuration in one go. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Implement finer-grained hooksMaxime Ripard1-4/+35
In order to prevent some pixels getting stuck in an unflushable FIFO on bcm2711, we need to enable the HVS, the pixelvalve (the CRTC) and the HDMI controller (the encoder) in an intertwined way, and with tight delays. However, the atomic callbacks don't really provide a way to work with either constraints, so we need to roll our own callbacks so that we can provide those guarantees. Since those callbacks have been implemented and called in the CRTC code, we can just implement them in the HDMI driver now. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/2e9226d971117065f3b97e597f04f7fe2f0c134c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Always recenter the HDMI FIFOMaxime Ripard1-20/+26
In order to avoid a pixel getting stuck in an unflushable FIFO, we need to recenter the FIFO every time we're doing a modeset and not only if we're connected to an HDMI monitor. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove register dumps in enableMaxime Ripard1-17/+0
The current code has some logic, disabled by default, to dump the register setup in the HDMI controller. However, since we're going to split those functions in multiple, shorter, functions that only make sense where they are called in sequence, keeping the register dump makes little sense. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/c8c8d388f2d32fc3536336be36d003a862487eb7.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Deal with multiple ALSA cardsMaxime Ripard2-1/+5
The HDMI driver was registering a single ALSA card so far with the name vc4-hdmi. Obviously, this is not going to work anymore when we will have multiple HDMI controllers since we will end up trying to register two files with the same name. Let's use the variant to avoid that name conflict. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/e60a37444e848a384a45707a21d6df8883115f86.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add audio-related callbacksDave Stevenson2-8/+21
The audio configuration has changed for the BCM2711, with notably a different parent clock and a different channel configuration. Make that modular to be able to support the BCM2711. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/85a8ca721c2d800be758c55870cea98536749680.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.Dave Stevenson1-1/+2
ALSA's iec958 plugin by default sets the block start preamble to 8, whilst this driver was programming the hardware to expect 0xF. Amend the hardware config to match ALSA. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0b126deb228baf1244c91e02ac0a8f7c9c60dc5.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streamingDave Stevenson2-0/+14
If the encoder is disabled and re-enabled (eg mode change) all infoframes are reset, whilst the audio subsystem know nothing about this change. The driver therefore needs to reinstate the audio infoframe for itself. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registersDave Stevenson1-1/+8
The register range used for audio setup in the previous generations of SoC were always the second range in the device tree. However, now that the BCM2711 has way more register ranges, it makes sense to retrieve it by names for it, while preserving the id-based lookup as a fallback. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/a1ba5605fe1006a1ead5262ef3d66ea5d0750381.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use clk_set_min_rate insteadMaxime Ripard1-1/+1
The HSM clock needs to be running at 101% the pixel clock of the HDMI controller, however it's shared between the two HDMI controllers, which means that if the resolutions are different between the two HDMI controllers, and the lowest resolution is on the second (in enable order) controller, the first HDMI controller will end up with a smaller than expected clock rate. Since we don't really need an exact frequency there, we can simply change the minimum rate we expect instead. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/821992209cc0d7a83254bf26fe2bf507ef0994d2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rateMaxime Ripard2-41/+41
The HSM clock needs to be setup at around 101% of the pixel rate. This was done previously by setting the clock rate to 163.7MHz at probe time and only check in mode_valid whether the mode pixel clock was under the pixel clock +1% or not. However, with 4k we need to change that frequency to a higher frequency than 163.7MHz, and yet want to have the lowest clock as possible to have a decent power saving. Let's change that logic a bit by setting the clock rate of the HSM clock to the pixel rate at encoder_enable time. This would work for the BCM2711 that support 4k resolutions and has a clock that can provide it, but we still have to take care of a 4k panel plugged on a BCM283x SoCs that wouldn't be able to use those modes, so let's define the limit in the variant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Rename drm_encoder pointer in mode_validMaxime Ripard1-1/+1
The mode_valid hook on the encoder uses a pointer to a drm_encoder called crtc, which is pretty confusing. Let's rename it to encoder to make it clear what it is. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7fbabab03992efe4a3a3640ac5ee2bb49b1c7338.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV defineMaxime Ripard1-1/+0
The CEC_CLOCK_DIV define is not used anywhere in the driver, let's remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/53805cc47e99a137e5f08c92fb781cc2e2134299.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add CEC support flagMaxime Ripard2-0/+7
Similarly to the audio support, CEC support is not there yet for the BCM2711, so let's skip entirely the CEC initialization through a variant flag. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-08 22:52:47 +0300