summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4
AgeCommit message (Collapse)AuthorFilesLines
2023-03-11drm/vc4: dpi: Fix format mapping for RGB565Dave Stevenson1-1/+1
[ Upstream commit 0870d86eac8a9abd89a0be1b719d5dc5bac936f0 ] The mapping is incorrect for RGB565_1X16 as it should be DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3. Fixes: 08302c35b59d ("drm/vc4: Add DPI driver") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11drm/vc4: dpi: Add option for inverting pixel clock and output enableDave Stevenson1-28/+38
[ Upstream commit 3c2707632146b22e97b0fbf6778bab8add2eaa1d ] DRM provides flags for inverting pixel clock and output enable signals, but these were not mapped to the relevant registers. Add those mappings. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-10-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Stable-dep-of: 0870d86eac8a ("drm/vc4: dpi: Fix format mapping for RGB565") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25drm/vc4: Fix missing platform_unregister_drivers() call in vc4_drm_register()Yuan Can1-1/+6
[ Upstream commit cf53db768a8790fdaae2fa3a81322b080285f7e5 ] A problem about modprobe vc4 failed is triggered with the following log given: [ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting... [ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16 modprobe: ERROR: could not insert 'vc4': Device or resource busy The reason is that vc4_drm_register() returns platform_driver_register() directly without checking its return value, if platform_driver_register() fails, it returns without unregistering all the vc4 drivers, resulting the vc4 can never be installed later. A simple call graph is shown as below: vc4_drm_register() platform_register_drivers() # all vc4 drivers are registered platform_driver_register() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without unregister drivers Fixing this problem by checking the return value of platform_driver_register() and do platform_unregister_drivers() if error happened. Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26drm/vc4: vec: Fix timings for VEC modesMateusz Kwiatkowski1-2/+2
[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ] This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25drm/vc4: dsi: Correct DSI divider calculationsDave Stevenson1-4/+2
[ Upstream commit 3b45eee87da171caa28f61240ddb5c21170cda53 ] The divider calculations tried to find the divider just faster than the clock requested. However if it required a divider of 7 then the for loop aborted without handling the "error" case, and could end up with a clock lower than requested. The integer divider from parent PLL to DSI clock is also capable of going up to /255, not just /7 that the driver was trying. This allows for slower link frequencies on the DSI bus where the resolution permits. Correct the loop so that we always have a clock greater than requested, and covering the whole range of dividers. Fixes: 86c1b9eff3f2 ("drm/vc4: Adjust modes in DSI to work around the integer PLL divider.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-13-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drm/vc4: txp: Force alpha to be 0xff if it's disabledMaxime Ripard1-0/+6
[ Upstream commit 5453343a88ede8b12812fced81ecd24cb888ccc3 ] If we use a format that has padding instead of the alpha component (such as XRGB8888), it appears that the Transposer will fill the padding to 0, disregarding what was stored in the input buffer padding. This leads to issues with IGT, since it will set the padding to 0xff, but will then compare the CRC of the two frames which will thus fail. Another nice side effect is that it is now possible to just use the buffer as ARGB. Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20220328153659.2382206-4-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drm/vc4: txp: Don't set TXP_VSTART_AT_EOFMaxime Ripard1-1/+1
[ Upstream commit 234998df929f14d00cbf2f1e81a7facb69fd9266 ] The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS. However, the HVS waits for VSTART to enable the FIFO and will thus start filling the FIFO before the start of the frame. This leads to corruption at the beginning of the first frame, and content from the previous frame at the beginning of the next frames. Since one VSTART is enough, let's get rid of it. Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/vc4: fix error code in vc4_create_object()Dan Carpenter1-1/+1
[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ] The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example. Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
[ Upstream commit 9ce0af3e9573fb84c4c807183d13ea2a68271e4b ] There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01drm/vc4/vc4_hdmi: fill ASoC card ownerMarek Szyprowski1-0/+1
[ Upstream commit ec653df2a0cbc306a4bfcb0e3484d318fa779002 ] card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23drm/vc4: Fix HDMI mode validationNicolas Saenz Julienne1-4/+16
[ Upstream commit b1e7396a1d0e6af6806337fdaaa44098d6b3343c ] Current mode validation impedes setting up some video modes which should be supported otherwise. Namely 1920x1200@60Hz. Fix this by lowering the minimum HDMI state machine clock to pixel clock ratio allowed. Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15drm/vc4: fix fb references in async updateHelen Koike1-0/+1
commit c16b85559dcfb5a348cc085a7b4c75ed49b05e2c upstream. Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new fb and put the old fb) is not required, as it's taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 539c320bfa97 ("drm/vc4: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02drm/vc4: Fix compilation error reported by kbuild test botMaarten Lankhorst1-1/+1
commit 462ce5d963f18b71c63f6b7730a35a2ee5273540 upstream. A pointer to crtc was missing, resulting in the following build error: drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types) drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: expected struct drm_crtc *crtc drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: got struct drm_crtc_state *state drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: kbuild test robot <lkp@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com Fixes: d08106796a78 ("drm/vc4: Fix memory leak during gpu reset.") Cc: <stable@vger.kernel.org> # v4.6+ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02drm/vc4: Fix memory leak during gpu reset.Maarten Lankhorst1-1/+1
commit d08106796a78a4273e39e1bbdf538dc4334b2635 upstream. __drm_atomic_helper_crtc_destroy_state does not free memory, it only cleans it up. Fix this by calling the functions own destroy function. Fixes: 6d6e50039187 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.") Cc: Eric Anholt <eric@anholt.net> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-2-maarten.lankhorst@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12drm/vc4: ->x_scaling[1] should never be set to VC4_SCALING_NONEBoris Brezillon1-5/+7
[ Upstream commit 0560054da5673b25d56bea6c57c8d069673af73b ] For the YUV conversion to work properly, ->x_scaling[1] should never be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE into VC4_SCALING_PPF when that happens. The old ->x_scaling[0] adjustment is dropped as I couldn't find any mention to this constraint in the spec and it's proven to be unnecessary (I tested various multi-planar YUV formats with scaling disabled, and all of them worked fine without this adjustment). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13drm/vc4: Set ->is_yuv to false when num_planes == 1Boris Brezillon1-0/+1
commit 2b02a05bdc3a62d36e0d0b015351897109e25991 upstream. When vc4_plane_state is duplicated ->is_yuv is left assigned to its previous value, and we never set it back to false when switching to a non-YUV format. Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch of the vc4_plane_setup_clipping_and_scaling() function. Fixes: fc04023fafecf ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01drm/vc4: Set ->legacy_cursor_update to false when doing non-async updatesBoris Brezillon1-0/+6
commit fcc86cb45d38ca2f24bcea9c29c7f4742041caed upstream. drm_atomic_helper_setup_commit() auto-completes commit->flip_done when state->legacy_cursor_update is true, but we know for sure that we want a sync update when we call drm_atomic_helper_setup_commit() from vc4_atomic_commit(). Explicitly set state->legacy_cursor_update to false to prevent this auto-completion. Fixes: 184d3cf4f738 ("drm/vc4: Use wait_for_flip_done() instead of wait_for_vblanks()") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-2-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10drm/vc4: Fix the "no scaling" case on multi-planar YUV formatsBoris Brezillon1-13/+12
When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-08-16Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds14-84/+749
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-07-25drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formatsBoris Brezillon1-0/+3
This is needed to ensure ->is_unity is correct when the plane was previously configured to output a multi-planar format with scaling enabled, and is then being reconfigured to output a uniplanar format. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com
2018-07-17drm/vc4: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-4/+4
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180717085428.18500-1-tzimmermann@suse.de
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter2-2/+2
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter1-1/+1
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-10drm/vc4: Support the case where the DSI device is disabledBoris Brezillon1-2/+13
Having a device with a status property != "okay" in the DT is a valid use case, and we should not prevent the registration of the DRM device when the DSI device connected to the DSI controller is disabled. Consider the ENODEV return code as a valid result and do not expose the DSI encoder/connector when it happens. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-5-boris.brezillon@bootlin.com
2018-07-07drm/vc4: Add support for the transposer blockBoris Brezillon6-24/+601
The transposer block is providing support for mem-to-mem composition, which is exposed as a drm_writeback connector in DRM. Add a driver to support this feature. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-9-boris.brezillon@bootlin.com
2018-07-07drm/vc4: Call drm_atomic_helper_fake_vblank() in the commit pathBoris Brezillon1-0/+2
Mimic what is done in drm_atomic_commit_tail() and call drm_atomic_helper_fake_vblank() so that VBLANK events are faked when the drm_crtc_state.no_vblank is true. Will be needed when we'll add support for the transposer block. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-8-boris.brezillon@bootlin.com
2018-07-07drm/vc4: Use wait_for_flip_done() instead of wait_for_vblanks()Boris Brezillon1-10/+1
drm_atomic_helper_wait_for_vblanks() assumes the CRTC will continuously generate VBLANK events and the vblank counter will keep increasing. While this work for a regular pipeline, it doesn't when you have the CRTC is feeding the transposer block, because this block works in oneshot mode, and, by the time we reach drm_atomic_helper_wait_for_vblanks() the only VBLANK event might have already been sent and the VBLANK counter will stay unchanged, thus triggering a timeout. Luckily, we can replace the drm_atomic_helper_wait_for_vblanks() call by drm_atomic_helper_wait_for_flip_done() because the only thing we want to check when calling drm_atomic_helper_wait_for_vblanks() from vc4_atomic_complete_commit() is that new FBs are in use and the old ones can be safely released. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-5-boris.brezillon@bootlin.com
2018-07-03drm/vc4: Remove unecessary dma_fence_opsDaniel Vetter1-8/+0
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. v2: Also remove the relase hook, dma_fence_free is the default. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180504140901.27471-1-daniel.vetter@ffwll.ch
2018-07-03drm: add missing ctx argument to plane transitional helpersRussell King1-1/+1
In commits: 34a2ab5e0689 ("drm: Add acquire ctx parameter to ->update_plane") 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") a pointer to a drm_modeset_acquire_ctx structure was added as an argument to the method prototypes. The transitional helpers are supposed to be directly plugged in as implementations of these methods, but doing so generates a warning. Add the missing argument. A number of buggy users were added for drm_plane_helper_disable() which need to be fixed up for this change, which we do by passing a NULL ctx argument. Fixes: 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
2018-07-02drm/vc4: Use drm_crtc_mask()Ville Syrjälä1-3/+3
Use drm_crtc_mask() where appropriate. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-9-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-06-29drm/vc4: Make DSI call into the bridge after the DSI link is enabled.Eric Anholt1-15/+27
This allows panels or bridges that need to send DSI commands during pre_enable() to successfully send them. We delay DISP0 (aka the actual display) enabling until after pre_enable so that pixels aren't streaming before then. v2: Just clear out the encoder->bridge value to disable the midlayer calls (idea by Andrzej Hajda). Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621231759.29604-1-eric@anholt.net Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
2018-06-28Merge tag 'drm-misc-next-2018-06-27' of ↵Dave Airlie2-2/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Cross-subsystem Changes: devicetree documentation dt-bindings defintions for sun8i (Jernej Skrabec) Core Changes: Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt) Improvements for in-kernel clients (Noralf Trønnes) Export and rename drm_crtc_port_mask() (Jernej Skrabec) Driver Changes: v3d: Add looking for GPU scheduler jobs management (Eric Anholt) Add Ilitek ILI9881c panel driver(Maxime Ripard) rockchip: vop: fixup linebuffer mode calc error (Sandy Huang) tinydrm: new driver for ILI9341 display panels (David Lechner) sun4i: Add TCON TOP driver (Jernej Skrabec) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of ↵Dave Airlie3-13/+92
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-21gpu: drm: vc4: Adding new typedef vm_fault_tSouptick Joarder2-2/+3
Use new return type vm_fault_t for fault handler. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan4-5/+69
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-20drm/vc4: Always obey implicit syncDaniel Vetter1-4/+7
Same justification as for drm_gem_fb_prepare_fb. Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-9-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11drm/vc4: Stop updating plane->fb/crtcVille Syrjälä1-3/+0
We want to get rid of plane->fb/crtc on atomic drivers. Stop setting them. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-13-ville.syrjala@linux.intel.com Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-06-08Merge tag 'drm-misc-next-fixes-2018-05-31' of ↵Dave Airlie1-0/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v4.18: Driver changes: - Plug small memory leak in vc4. (anholt) - Depend on MMU in v3d. (arnd) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/12faab25-e809-e73c-409c-5e9c08aa351c@linux.intel.com
2018-06-06Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-134/+530
Pull drm updates from Dave Airlie: "This starts to support NVIDIA volta hardware with nouveau, and adds amdgpu support for the GPU in the Kabylake-G (the intel + radeon single package chip), along with some initial Intel icelake enabling. Summary: New Drivers: - v3d - driver for broadcom V3D V3.x+ hardware - xen-front - XEN PV display frontend core: - handle zpos normalization in the core - stop looking at legacy pointers in atomic paths - improved scheduler documentation - improved aspect ratio validation - aspect ratio support for 64:27 and 256:135 - drop unused control node code. i915: - Icelake (ICL) enabling - GuC/HuC refactoring - PSR/PSR2 enabling and fixes - DPLL management refactoring - DP MST fixes - NV12 enabling - HDCP improvements - GEM/Execlist/reset improvements - GVT improvements - stolen memory first 4k fix amdgpu: - Vega 20 support - VEGAM support (Kabylake-G) - preOS scanout buffer reservation - power management gfxoff support for raven - SR-IOV fixes - Vega10 power profiles and clock voltage control - scatter/gather display support on CZ/ST amdkfd: - GFX9 dGPU support - userptr memory mapping nouveau: - major refactoring for Volta GV100 support tda998x: - HDMI i2c CEC support etnaviv: - removed unused logging code - license text cleanups - MMU handling improvements - timeout fence fix for 50 days uptime tegra: - IOMMU support in gr2d/gr3d drivers - zpos support vc4: - syncobj support - CTM, plane alpha and async cursor support analogix_dp: - HPD and aux chan fixes sun4i: - MIPI DSI support tilcdc: - clock divider fixes for OMAP-l138 LCDK board rcar-du: - R8A77965 support - dma-buf fences fixes - hardware indexed crtc/du group handling - generic zplane property support atmel-hclcdc: - generic zplane property support mediatek: - use generic video mode function exynos: - S5PV210 FIMD variant support - IPP v2 framework - more HW overlays support" * tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits) drm/amdgpu: fix 32-bit build warning drm/exynos: fimc: signedness bug in fimc_setup_clocks() drm/exynos: scaler: fix static checker warning drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC drm/amd/display: Remove use of division operator for long longs drm/amdgpu: Update GFX info structure to match what vega20 used drm/amdgpu/pp: remove duplicate assignment drm/sched: add rcu_barrier after entity fini drm/amdgpu: move VM BOs on LRU again drm/amdgpu: consistenly use VM moved flag drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories drm/amdgpu: further optimize amdgpu_vm_handle_moved drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2 drm/amdgpu: rework VM state machine lock handling v2 drm/amdgpu: Add runtime VCN PG support drm/amdgpu: Enable VCN static PG by default on RV drm/amdgpu: Add VCN static PG support on RV drm/amdgpu: Enable VCN CG by default on RV drm/amdgpu: Add static CG control for VCN on RV drm/exynos: Fix default value for zpos plane property ...
2018-05-31drm/vc4: Add support for SAND modifier.Dave Stevenson2-7/+83
This is the format generated by VC4's H.264 engine, and preferred by the ISP as well. By displaying SAND buffers directly, we can avoid needing to use the ISP to rewrite the SAND H.264 output to linear before display. This is a joint effort by Dave Stevenson (who wrote the initial patch and DRM demo) and Eric Anholt (drm_fourcc.h generalization, safety checks, RGBA support). v2: Make the parameter macro give all of the middle 48 bits (suggested by Daniels). Fix fourcc_mod_broadcom_mod()'s bits/shift being swapped. Mark NV12/21 as supported, not YUV420. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Daniel Stone <daniels@collabora.com> (v1) Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@anholt.net
2018-05-31drm/vc4: Add missing formats to vc4_format_mod_supported().Eric Anholt1-0/+2
Daniel's format_mod_supported() patch predated Dave's for NV21/61, and I didn't catch that when rebasing. This is a problem since the formats are now getting validated before being passed to the driver's atomic hooks. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Stone <daniels@collabora.com> Cc: Dave Stevenson <dave.stevenson@raspberrypi.org> Fixes: 423ad7b3cbd1 ("drm/vc4: Advertise supported modifiers for planes") Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-2-eric@anholt.net
2018-05-30drm/vc4: Fix leak of the file_priv that stored the perfmon.Eric Anholt1-0/+1
Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 65101d8c9108 ("drm/vc4: Expose performance counters to userspace") Link: https://patchwork.freedesktop.org/patch/msgid/20180409205813.7077-1-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18Merge drm-fixes-for-v4.17-rc6-urgent into drm-nextDave Airlie2-4/+23
Need to backmerge some nouveau fixes to reduce the nouveau -next conflicts a lot. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-05-17drm/vc4: plane: Expand the lower bits by repeating the higher bitsMaxime Ripard1-0/+1
The vc4 HVS uses an internal RGB888 representation of the frames, and will by default expand formats using a lower depth using zeros. This causes an issue when we try to use other compositing software such as pixman that fill the missing bits by repeating the higher significant bits. As such, we can't check the display output in a reliable way by doing a software composition and an hardware one and compare both. To prevent this, force the same behaviour so that we can do such things. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180517133759.25626-1-maxime.ripard@bootlin.com
2018-05-15drm/vc4: Fix leak of the file_priv that stored the perfmon.Eric Anholt1-0/+1
Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 65101d8c9108 ("drm/vc4: Expose performance counters to userspace") Link: https://patchwork.freedesktop.org/patch/msgid/20180409205813.7077-1-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-05-15Merge tag 'drm-misc-next-2018-05-15' of ↵Dave Airlie5-6/+63
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.18: UAPI Changes: - Fix render node number regression from control node removal. Driver Changes: - Small header fix for virgl, used by qemu. - Use vm_fault_t in qxl. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 15 May 2018 06:16:03 PM AEST # gpg: using RSA key FE558C72A67013C3 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/e63306b9-67a0-74ab-8883-08b3d9db72d2@mblankhorst.nl
2018-05-15Merge tag 'exynos-drm-next-for-v4.18' of ↵Dave Airlie1-1/+45
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Add S5PV210 FIMD variant support. - Add IPP v2 framework. . it is a rewritten version of the Exynos mem-to-mem image processing framework which supprts color space conversion, image up/down-scaling and rotation. This new version replaces existing userspace API with new easy-to-use and simple ones so we have already applied the use of these API to real user, Tizen Platform[1], and also makes existing Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API. And below are patch lists we have applied to a real user, https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipp https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fe https://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp TDM(Tizen Display Manager) is a Display HAL for Tizen platform. Ps. Only real user using IPP API is Tizen. [1] https://www.tizen.org/ - Two cleanups . One is to just remove mode_set callback from MIPI-DSI driver because drm_display_mode data is already available from crtc atomic state. . And other is to just use new return type, vm_fault_t for page fault handler. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Mon 14 May 2018 14:23:53 AEST # gpg: using RSA key 573834890C4312B8 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/1526276453-29879-1-git-send-email-inki.dae@samsung.com
2018-05-11Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst3-32/+18
drm-misc-next is still based on v4.16-rc7, and was getting a bit stale. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-05-09drm/vc4: Fix scaling of uni-planar formatsBoris Brezillon1-1/+1
When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 17:38:02 +0300