summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/sun4i
AgeCommit message (Collapse)AuthorFilesLines
2022-05-03Merge drm/drm-next into drm-misc-nextMaxime Ripard1-3/+0
Christian needs a backmerge to avoid a merge conflict for amdgpu. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-05-03Backmerge tag 'v5.18-rc5' of ↵Dave Airlie1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 5.18-rc5 There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-04-29drm/sun4i: dsi: delete unnecessary IS_ERR() checksDan Carpenter1-4/+3
The "dsi->bus_clk" pointer cannot be an error pointer at this point. The check is confusing and unnecessary. Delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/YmqH71MtoGn2AXUg@kili
2022-04-26drm/sun4i: Remove obsolete references to PHYS_OFFSETSamuel Holland1-3/+0
commit b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") added a platform device notifier that sets the DMA offset for all of the display engine frontend and backend devices. The code applying the offset to DMA buffer physical addresses was then removed from the backend driver in commit 756668ba682e ("drm/sun4i: backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET was left in the frontend driver. As a result, the offset was applied twice in the frontend driver. This likely went unnoticed because it only affects specific configurations (scaling or certain pixel formats) where the frontend is used, on boards with both one of these older SoCs and more than 1 GB of DRAM. In addition, the references to PHYS_OFFSET prevent compiling the driver on architectures where PHYS_OFFSET is not defined. Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org
2022-04-26drm/sun4i: Add compatible for D1 display engineSamuel Holland1-0/+1
Now that the various blocks in the D1 display engine pipeline are supported, we can enable the overall engine. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-15-samuel@sholland.org
2022-04-26drm/sun4i: Add support for D1 TCONsSamuel Holland1-0/+8
D1 has a TCON TOP, so its quirks are similar to those for the R40 TCONs. While there are some register changes, the part of the TCON TV supported by the driver matches the R40 quirks, so that quirks structure can be reused. D1 has the first supported TCON LCD with a TCON TOP, so the TCON LCD needs a new quirks structure. D1's TCON LCD hardware supports LVDS; in fact it provides dual-link LVDS from a single TCON. However, it comes with a brand new LVDS PHY. Since this PHY has not been tested, leave out LVDS driver support for now. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-14-samuel@sholland.org
2022-04-26drm/sun4i: Add support for D1 TCON TOPSamuel Holland1-3/+12
D1 has a TCON TOP with TCON TV0 and DSI, but no TCON TV1. This puts the DSI clock name at index 1 in clock-output-names. Support this by only incrementing the index for clocks that are actually supported. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-13-samuel@sholland.org
2022-04-26drm/sun4i: Add support for D1 mixersSamuel Holland1-0/+26
D1 has a display engine with the usual pair of mixers, albeit with relatively few layers. In fact, D1 appears to be the first SoC to have a mixer without any UI layers. Add support for these new variants. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-12-samuel@sholland.org
2022-04-26drm/sun4i: csc: Add support for the new MMIO layoutSamuel Holland4-16/+24
D1 changes the MMIO offsets for the CSC blocks in the first mixer. The mixers' ccsc property is used as an index into the ccsc_base array. Use an enumeration to describe this index, and add the new set of offsets. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-11-samuel@sholland.org
2022-04-26drm/sun4i: Allow VI layers to be primary planesSamuel Holland1-1/+5
D1's mixer 1 has no UI layers, only a single VI layer. That means the mixer can only be used if the primary plane comes from this VI layer. Add the code to handle this case. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-10-samuel@sholland.org
2022-04-26sun4i/drm: sun8i: use mode_set engine callbackJernej Skrabec2-30/+30
Newly introduced mode_set callback in engine structure is a much better place for setting mixer output size and interlace mode for the following reasons: 1. Aforementioned properties change only when mode changes, so it's enough to be set only once per mode set. Currently it's done whenever properties of primary plane are changed. 2. It's assumed that primary plane will always cover whole screen. While this is true most of the time, it's not always. DE2/3 planes are universal and mostly equal in functionality. There is no reason to add artificial limitation to primary planes. 3. The current code only works for UI layers, but some mixers do not have any UI layers. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> [Samuel: update commit message] Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-9-samuel@sholland.org
2022-04-26sun4i/drm: backend: use mode_set engine callbackJernej Skrabec1-20/+20
Newly introduced mode_set callback in engine structure is a much better place for setting backend output size and interlace mode for following reasons: 1. Aforementioned properties change only when mode changes, so it's enough to be set only once per mode set. Currently it's done whenever properties of primary plane are changed. 2. It's assumed that primary plane will always cover whole screen. While this is true most of the time, it's not always. Planes are universal. There is no reason to add artificial limitation to primary plane. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> [Samuel: drop unused 'interlaced' variable] Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-8-samuel@sholland.org
2022-04-26sun4i/drm: engine: Add mode_set callbackJernej Skrabec2-0/+28
This optional callback is useful for setting properties which depends only on current mode. Such properties are width, height and interlaced output. These properties are currently set in update layer callback for primary plane which is less than ideal. More about that in follow up patches, which will migrate that code to this newly defined callback. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-7-samuel@sholland.org
2022-04-26drm/sun4i: Allow building the driver on RISC-VSamuel Holland1-1/+1
Allwinner D1 is a RISC-V SoC which contains a DE 2.0 engine. Let's remove the dependency on a specific CPU architecture, so the driver can be built wherever ARCH_SUNXI is selected. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-6-samuel@sholland.org
2022-04-26drm/sun4i: hdmi: Use more portable I/O helpersSamuel Holland1-2/+2
readsb/writesb are unavailable on some architectures. In preparation for removing the Kconfig architecture dependency, switch to the equivalent but more portable ioread/write8_rep helpers. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-5-samuel@sholland.org
2022-04-22drm/sun4i: hdmi: Replace drm_detect_hdmi_monitor() with is_hdmiJosé Expósito2-4/+3
Once EDID is parsed, the monitor HDMI support information is available through drm_display_info.is_hdmi. This driver calls drm_detect_hdmi_monitor() to receive the same information and stores its own cached value, which is less efficient. Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi instead and also remove sun4i_hdmi.hdmi_monitor as it is no longer necessary. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220421170725.903361-6-jose.exposito89@gmail.com
2022-04-19drm: bridge: dw_hdmi: add reset function for PHY GEN1Sandor Yu1-1/+1
PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds1-10/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-25Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-10/+9
Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ...
2022-03-08drm/sun4i: mixer: Fix P010 and P210 format numbersJernej Skrabec1-4/+4
It turns out that DE3 manual has inverted YUV and YVU format numbers for P010 and P210. Invert them. This was tested by playing video decoded to P010 and additionally confirmed by looking at BSP driver source. Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
2022-02-25drm/sun4i: layer: Remove redundant zpos initialisationMaxime Ripard1-9/+7
The sun4i KMS driver will call drm_plane_create_zpos_property() with an init value depending on the plane type. Since the initial value wasn't carried over in the state, the driver had to set it again in sun4i_backend_layer_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@lists.linux.dev Cc: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-18-maxime@cerno.tech
2022-02-25drm/sun4i: Make use of the helper component_compare_ofYong Wu1-10/+1
Use the common compare helper from component. Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: linux-sunxi@lists.linux.dev Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20220214060819.7334-13-yong.wu@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-07Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst1-1/+3
First backmerge into drm-misc-next. Required for more helpers backmerged, and to pull in 5.17 (rc2). Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2022-01-27drm/sun4i: Use drm_module_platform_driver() to register the driverJavier Martinez Canillas1-1/+2
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-17-javierm@redhat.com
2022-01-14Merge tag 'drm-misc-fixes-2022-01-14' of ↵Daniel Vetter1-1/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next Two DT bindings fixes for meson, a device refcounting fix for sun4i, a probe fix for vga16fb, a locking fix for the CMA dma-buf heap and a compilation fix for ttm. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: I made sure I have exactly the same conflict resolution as Linus in 8d0749b4f83b ("Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm") to avoid further conflict fun. From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220114125454.zs46ny52lrxk3ljz@houat
2022-01-11drm/sun4i: dw-hdmi: Fix missing put_device() call in sun8i_hdmi_phy_getMiaoqian Lin1-1/+3
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220107083633.20843-1-linmq006@gmail.com
2021-12-10Merge tag 'drm-misc-next-2021-12-09' of ↵Dave Airlie1-1/+0
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.17: UAPI Changes: Cross-subsystem Changes: * dma-buf: Make fences mandatory in dma_resv_add_excl_fence Core Changes: * Move hashtable to legacy code * Return error pointers from struct drm_driver.gem_create_object * cma-helper: Improve public interfaces; Remove CONFIG_DRM_KMS_CMA_HELPER option * mipi-dbi: Don't depend on CMA helpers * ttm: Don't include DRM hashtable; Stop prunning fences after wait; Documentation Driver Changes: * aspeed: Select CONFIG_DRM_GEM_CMA_HELPER * bridge/lontium-lt9611: Fix HDMI sensing * bridge/parade-ps8640: Fixes * bridge/sn65dsi86: Defer probe is no dsi host found * fsl-dcu: Select CONFIG_DRM_GEM_CMA_HELPER * i915: Remove dma_resv_prune * omapdrm: Fix scatterlist export; Support virtual planes; Fixes * panel: Boe-tv110c9m,Inx-hj110iz: Update init code * qxl: Use dma-resv iterator * rockchip: Use generic fbdev emulation * tidss: Fixes * vmwgfx: Fix leak on probe errors; Fail probing on broken hosts; New placement for MOB page tables; Hide internal BOs from userspace; Cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YbHskHZc9HoAYuPZ@linux-uq9g.fritz.box
2021-11-30drm: Remove CONFIG_DRM_KMS_CMA_HELPER optionThomas Zimmermann1-1/+0
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
2021-11-23Merge tag 'drm-misc-next-2021-11-18' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.17: UAPI Changes: * Remove restrictions on DMA_BUF_SET_NAME ioctl * connector: State of privacy screen * sysfs: Send hotplug uevent Cross-subsystem Changes: * clk/bmc-2835: Fixes * dma-buf: Add dma_resv selftest; Error-handling fixes; Add debugfs helpers; Remove dma_resv_get_excl_unlocked(); Documentation fixes * pwm: Introduce of_pwm_single_xlate() Core Changes: * Support for privacy screens * Make drm_irq.c legacy * Fix __stack_depot_* name conflict * Documentation fixes * Fixes and cleanups * dp-helper: Reuse 8b/10b link-training delay helpers * format-helper: Update interfaces * fb-helper: Allocate shadow buffer of correct size * gem: Link GEM SHMEM and CMA helpers into separate modules; Use dma_resv iterator; Import DMA_BUF namespace into GEM-helper modules * gem/shmem-helper: Interface cleanups * scheduler: Grab fence in drm_sched_job_add_implicit_dependencies(); Lockdep fixes * kms-helpers: Link several files from core into the KMS-helper module Driver Changes: * Use dma_resv_iter in several places * Fixes and cleanups * amdgpu: Use drm_kms_helper_connector_hotplug_event(); Get all fences at once * bridge: Switch to managed MIPI DSI helpers in several places; Register and attach during probe in several places; Convert to YAML in several places * bridge/anx7625: Support MIPI DPI input; Support HDMI audio; Fixes * bridge/dw-hdmi: Allow interlace on bridge * bridge/ps8640: Enable PM; Support aux-bus * bridge/tc358768: Enabled reference clock; Support pulse mode; Modesetting fixes * bridge/ti-sn65dsi86: Use regmap_bulk_write(); Implement PWM * etnaviv: Get all fences at once * gma500: GEM object cleanups; Remove generic drivers in probe function * i915: Support VESA panel backlights * ingenic: Fixes and cleanups * kirin: Adjust probe order * kmb: Enable framebuffer console * lima: Kconfig fixes * meson: Refactoring to supperot DRM_BRIDGE_ATTACH_NO_ENCODER * msm: Fixes and cleanups * msm/dsi: Adjust probe order * omap: Fixes and cleanups * nouveau: CRC fixes; Validate LUTs in atomic check; Set HDMI AVI RGB quantization to FULL; Fixes and cleanups * panel: Support Innolux G070Y2-T02, Vivax TPC-9150, JDI R63452, Newhaven 1.8-128160EF, Wanchanglong W552964ABA, Novatek NT35950, BOE BF060Y8M, Sony Tulip Truly NT35521; Use dev_err_probe() throughout drivers; Fixes and cleanups * panel/ili9881c: Orientation fixes * radeon: Use dma_resv_wait_timeout() * rockchip: Add timeout for DSP hold; Suspend/resume fixes; PLL clock fixes; Implement mmap in GEM object functions * simpledrm: Support FB_DAMAGE_CLIPS and virtual screen sizes * sun4i: Use CMA helpers without vmap support * tidss: Fixes and cleanups * v3d: Cleanups * vc4: Fix HDMI-CEC hang when display is off; Power on HDMI controller while disabling; Support 4k@60 Hz modes; Fixes and cleanups * video: Convert to sysfs_emit() in several places * video/omapfb: Fix fall-through * virtio: Overflow fixes * xen: Implement mmap as GEM object functions Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YZYZSypIrr+qcih3@linux-uq9g.fritz.box
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann3-47/+61
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-11-16Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard10-46/+25
We need -rc1 to address a breakage in drm/scheduler affecting panfrost. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-15drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHYJulian Braha1-0/+1
When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER is not selected, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n] Selected by [y]: - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y] This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY without selecting or depending on RESET_CONTROLLER, despite PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. v2: Fixed indentation to match the rest of the file. Signed-off-by: Julian Braha <julianbraha@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie3-47/+61
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-21drm/sun4i: virtual CMA addresses are not neededJernej Skrabec1-1/+1
Driver never uses virtual address of DRM CMA buffers. Switch to CMA helpers which don't deal with virtual mapping. This was actually already the case before commit ad408c766cef ("drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations"), but only convenient macro at the time used helpers with virtual mapping. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211019181028.4190737-1-jernej.skrabec@gmail.com
2021-10-06drm/sun4i: dw-hdmi: Fix HDMI PHY clock setupJernej Skrabec3-47/+61
Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-09-16drm/sun4i: dw-hdmi: Make use of the helper function dev_err_probe()Cai Huoqing1-12/+9
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210916105633.12162-1-caihuoqing@baidu.com
2021-09-16drm/sun4i: dsi: Make use of the helper function dev_err_probe()Cai Huoqing1-8/+6
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210916105625.12109-1-caihuoqing@baidu.com
2021-09-01drm/sun4i: Fix macros in sun8i_csc.hJernej Skrabec1-2/+2
Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual recommendation of having arguments enclosed in parenthesis. While that didn't change anything for quite sometime, it actually become important after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3: Remove redundant CSC matrices"). Without this fix, colours are completely off for supported YVU formats on SoCs with DE2 (A64, H3, R40, etc.). Fix the issue by enclosing macro arguments in parenthesis. Cc: stable@vger.kernel.org # 5.12+ Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library") Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
2021-09-01drm/sun4i: Make use of the helper function devm_platform_ioremap_resource()Cai Huoqing8-24/+8
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210831135740.4826-1-caihuoqing@baidu.com
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart2-6/+2
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie4-6/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann1-1/+1
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-29drm/sun4i: Don't set struct drm_device.irq_enabledThomas Zimmermann1-2/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in sun4i. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-21-tzimmermann@suse.de
2021-06-24drm/<driver>: drm_gem_plane_helper_prepare_fb is now the defaultDaniel Vetter3-3/+0
No need to set it explicitly. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomba@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch
2021-06-23Backmerge tag 'v5.13-rc7' into drm-nextDave Airlie3-11/+66
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply, and to bake in the conflicts so far.
2021-06-07drm/sun4i: dw-hdmi: Make HDMI PHY into a platform deviceSaravana Kannan3-11/+66
On sunxi boards that use HDMI output, HDMI device probe keeps being avoided indefinitely with these repeated messages in dmesg: platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy not ready There's a fwnode_link being created with fw_devlink=on between hdmi and hdmi-phy nodes, because both nodes have 'compatible' property set. Fw_devlink code assumes that nodes that have compatible property set will also have a device associated with them by some driver eventually. This is not the case with the current sun8i-hdmi driver. This commit makes sun8i-hdmi-phy into a proper platform device and fixes the display pipeline probe on sunxi boards that use HDMI. More context: https://lkml.org/lkml/2021/5/16/203 Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com
2021-06-07drm/sun4i: de3: Be explicit about supported modifiersPiotr Oniszczuk2-2/+13
Currently only linear formats are supported in sun4i-drm driver, but SoCs like H6 supports AFBC variant of some of them in multiple cores (GPU, VPU, DE3). Panfrost already implements AFBC compression and is sometimes confused what should be default choice (linear, AFBC) if DRM driver is not explicit about modifier support (MiniMyth2 distro with MythTV app). After some discussion with Daniel Stone on #panfrost IRC, it was decided to make modifiers in sun4i-drm explicit, to avoid any kind of guessing, not just in panfrost, but everywhere. In fact, long term idea is to make modifier parameter in drm_universal_plane_init() mandatory (non NULL). Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210605073534.3786194-1-jernej.skrabec@gmail.com
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann1-1/+4
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie6-37/+137
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard3-3/+6
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-01 09:32:21 +0300