summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)AuthorFilesLines
2023-09-19drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01Marek Vasut1-1/+3
[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ] The connector type and pixel format are missing for this panel, add them to prevent various drivers from failing to determine either of those parameters. Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docsLuca Ceresoli1-12/+12
[ Upstream commit e8470c0a7bcaa82f78ad34282d662dd7bd9630c2 ] Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27drm/panel: simple: Add Powertip PH800480T013 drm_display_mode flagsMarek Vasut1-0/+1
[ Upstream commit 1c519980aced3da1fae37c1339cf43b24eccdee7 ] Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC flags. Those are used by various bridges in the pipeline to correctly configure its sync signals polarity. Fixes: d69de69f2be1 ("drm/panel: simple: Add Powertip PH800480T013 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201602.565948-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27drm/panel: simple: Add connector_type for innolux_at043tn24Fabio Estevam1-0/+1
[ Upstream commit 2c56a751845ddfd3078ebe79981aaaa182629163 ] The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type' information to avoid the following warning: panel-simple panel: Specify missing connector_type Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 41bcceb4de9c ("drm/panel: simple: Add support for Innolux AT043TN24") Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01HDario Binacchi1-2/+2
[ Upstream commit f24b49550814fdee4a98b9552e35e243ccafd4a8 ] The previous setting was related to the overall dimension and not to the active display area. In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the following parameters: ---------------------------------------------------------- | Item | Specifications | unit | ---------------------------------------------------------- | Display area | 98.7 (W) x 57.5 (H) | mm | ---------------------------------------------------------- | Overall dimension | 105.5(W) x 67.2(H) x 4.96(D) | mm | ---------------------------------------------------------- Fixes: 966fea78adf2 ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> [narmstrong: fixed Fixes commit id length] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27drm/panel: sharp-ls043t1le01: adjust mode settingsDmitry Baryshkov1-5/+6
[ Upstream commit dee23b2c9e3ff46d59c5d45e1436eceb878e7c9a ] Using current settings causes panel flickering on APQ8074 dragonboard. Adjust panel settings to follow the vendor-provided mode. This also enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the vendor dtsi for the mentioned dragonboard. Fixes: ee0172383190 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17drm/panel: otm8009a: Set backlight parent to panel deviceJames Cowgill1-1/+1
commit ab4f869fba6119997f7630d600049762a2b014fa upstream. This is the logical place to put the backlight device, and it also fixes a kernel crash if the MIPI host is removed. Previously the backlight device would be unregistered twice when this happened - once as a child of the MIPI host through `mipi_dsi_host_unregister`, and once when the panel device is destroyed. Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-14drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failureMarek Vasut1-1/+9
[ Upstream commit c62102165dd79284d42383d2f7ed17301bd8e629 ] In case mipi_dsi_attach() fails, call drm_panel_remove() to avoid memory leak. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25drm/panel: simple: set bpc field for logic technologies displaysAishwarya Kothari1-0/+2
[ Upstream commit 876153ab068b2507a19aa3ef481f5b00a2cc780f ] In case bpc is not set for a panel it then throws a WARN(). Add bpc to the panels logictechno_lt170410_2whc and logictechno_lt161010_2nh. Fixes: 5728fe7fa539 ("drm/panel: simple: add display timings for logic technologies displays") Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831141622.39605-1-francesco.dolcini@toradex.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28drm/panel: simple: Fix innolux_g121i1_l01 bus_formatHeiko Schocher1-1/+1
[ Upstream commit a7c48a0ab87ae52c087d663e83e56b8225ac4cce ] innolux_g121i1_l01 sets bpc to 6, so use the corresponding bus format: MEDIA_BUS_FMT_RGB666_1X7X3_SPWG. Fixes: 4ae13e486866 ("drm/panel: simple: Add more properties to Innolux G121I1-L01") Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220826165021.1592532-1-festevam@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09drm/panel: panel-simple: Fix proper bpc for AM-1280800N3TZQW-T00HJagan Teki1-1/+1
[ Upstream commit 7eafbecd2288c542ea15ea20cf1a7e64a25c21bc ] AM-1280800N3TZQW-T00H panel support 8 bpc not 6 bpc as per recent testing in i.MX8MM platform. Fix it. Fixes: bca684e69c4c ("drm/panel: simple: Add AM-1280800N3TZQW-T00H") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211111094103.494831-1-jagan@amarulasolutions.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09drm/panel: simple: Add missing bus flags for Innolux G070Y2-L01Marek Vasut1-0/+1
[ Upstream commit 0f73a559f916b618c0c05186bd644c90cc9e9695 ] The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing . Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220406093627.18011-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepareDave Stevenson1-2/+9
[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ] The panel has a prepare call which is before video starts, and an enable call which is after. The Toshiba bridge should be configured before video, so move the relevant power and initialisation calls to prepare. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialisedDave Stevenson1-1/+1
[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ] If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL. Use ts->i2c->dev instead, which is initialised earlier in probe. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23drm/panel: simple: Fix Innolux G070Y2-L01 BPP settingsMarek Vasut1-1/+1
[ Upstream commit fc1b6ef7bfb3d1d4df868b1c3e0480cacda6cd81 ] The Innolux G070Y2-L01 supports two modes of operation: 1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6 2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8 Currently the panel description mixes both, BPP from 1) and bus format from 2), which triggers a warning at panel-simple.c:615. Pick the later, set bpp=8, fix the warning. Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16drm/panel: simple: Assign data from panel_dpi_probe() correctlyChristoph Niedermaier1-0/+1
[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ] In the function panel_simple_probe() the pointer panel->desc is assigned to the passed pointer desc. If function panel_dpi_probe() is called panel->desc will be updated, but further on only desc will be evaluated. So update the desc pointer to be able to use the data from the function panel_dpi_probe(). Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> To: dri-devel@lists.freedesktop.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/panel: innolux-p079zca: Delete panel on attach() failureBrian Norris1-1/+9
[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ] If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't ready), we leave a dangling drm_panel reference to freed memory. Clean that up on failure. This problem exists since the driver's introduction, but is especially relevant after refactored for dual-DSI variants. Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver") Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/panel: kingdisplay-kd097d04: Delete panel on attach() failureBrian Norris1-1/+7
[ Upstream commit 5f31dbeae8a88f31c3eb4eb526ab4807c40da241 ] If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't ready), we leave a dangling drm_panel reference to freed memory. Clean that up on failure. Fixes: 2a994cbed6b2 ("drm/panel: Add Kingdisplay KD097D04 panel driver") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.1.Icb4d9dbc1817f4e826361a4f1cea7461541668f0@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panelDan Johansen1-6/+6
[ Upstream commit 772970620a839141835eaf2bc507d957b10adcca ] This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard <marius@ubports.com> Signed-off-by: Dan Johansen <strit@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20drm/panel: olimex-lcd-olinuxino: select CRC32Vegard Nossum1-0/+1
commit a14bc107edd0c108bda2245e50daa22f91c95d20 upstream. Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28drm/panel: raspberrypi-touchscreen: Prevent double-freeMaxime Ripard1-1/+0
[ Upstream commit 7bbcb919e32d776ca8ddce08abb391ab92eef6a9 ] The mipi_dsi_device allocated by mipi_dsi_device_register_full() is already free'd on release. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25drm/panel: nt35510: Do not fail if DSI read failsLinus Walleij1-3/+1
commit 1988e0d84161dabd99d1c27033fbd6ee439bf432 upstream. Failing to read the MTP over DSI should not bring down the system and make us bail out from using the display, it turns out that this happens when toggling the display off and on, and that write is often still working so the display output is just fine. Printing an error is enough. Tested by killing the Gnome session repeatedly on the Samsung Skomer. Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels") Cc: Stephan Gerhold <stephan@gerhold.net> Reported-by: newbyte@disroot.org Acked-by: Stefan Hansson <newbyte@disroot.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210603231830.3200040-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14drm/mcde/panel: Inverse misunderstood flagLinus Walleij4-8/+3
[ Upstream commit d0c5ac04e7feedbc069f26f4dcbf35b521ae7fc5 ] A recent patch renaming MIPI_DSI_MODE_EOT_PACKET to MIPI_DSI_MODE_NO_EOT_PACKET brought to light the misunderstanding in the current MCDE driver and all its associated panel drivers that MIPI_DSI_MODE_EOT_PACKET would mean "use EOT packet" when in fact it means the reverse. Fix it up by implementing the flag right in the MCDE DSI driver and remove the flag from panels that actually want the EOT packet. Suggested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE") Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels") Fixes: ac1d6d74884e ("drm/panel: Add driver for Samsung S6D16D0 panel") Fixes: 435e06c06cb2 ("drm/panel: s6e63m0: Add DSI transport") Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel") Link: https://patchwork.freedesktop.org/patch/msgid/20210304004138.1785057-1-linus.walleij@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04drm/panel: kd35t133: allow using non-continuous dsi clockHeiko Stuebner1-1/+2
commit d922d58fedcd98ba625e89b625a98e222b090b10 upstream. The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Also the flag actually becomes necessary after commit c6d94e37bdbb ("drm/bridge/synopsys: dsi: add support for non-continuous HS clock") and without it the panel only emits stripes instead of output. Fixes: c6d94e37bdbb ("drm/bridge/synopsys: dsi: add support for non-continuous HS clock") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Christopher Morgan <macromorgan@hotmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210206135020.1991820-1-heiko@sntech.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04drm/panel: mantix: Tweak init sequenceGuido Günther1-0/+5
[ Upstream commit dd396dbc4d7811c1567cc43faa4b9ad68094c44d ] We've seen some (non permanent) burn in and bad white balance on some of the panels. Adding this bit from a vendor supplied sequence fixes it. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/8451831b60d5ecb73a156613d98218a31bd55680.1605688147.git.agx@sigxcpu.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23drm/panel: otm8009a: allow using non-continuous dsi clockAntonio Borneo1-1/+1
commit 880ee3b7615e7cc087f659cb80ce22f5db56f9a2 upstream. The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Changes in v2: - Added my signed-off Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com Cc: "Alex G." <mr.nuke.me@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30drm/panel: simple: Add flags to boe_nv133fhm_n61Stephen Boyd1-0/+1
[ Upstream commit ab6fd5d44aa21ede9e566f89132f7bdda7f33093 ] Reading the EDID of this panel shows that these flags should be set. Set them so that we match what is in the EDID. Cc: Douglas Anderson <dianders@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-30drm/panel: sony-acx565akm: Fix race condition in probeSebastian Reichel1-1/+1
The probe routine acquires the reset GPIO using GPIOD_OUT_LOW. Directly afterwards it calls acx565akm_detect(), which sets the GPIO value to HIGH. If the bootloader initialized the GPIO to HIGH before the probe routine was called, there is only a very short time period of a few instructions where the reset signal is LOW. Exact time depends on compiler optimizations, kernel configuration and alignment of the stars, but I expect it to be always way less than 10us. There are no public datasheets for the panel, but acx565akm_power_on() has a comment with timings and reset period should be at least 10us. So this potentially brings the panel into a half-reset state. The result is, that panel may not work after boot and can get into a working state by re-enabling it (e.g. by blanking + unblanking), since that does a clean reset cycle. This bug has recently been hit by Ivaylo Dimitrov, but there are some older reports which are probably the same bug. At least Tony Lindgren, Peter Ujfalusi and Jarkko Nikula have experienced it in 2017 describing the blank/unblank procedure as possible workaround. Note, that the bug really goes back in time. It has originally been introduced in the predecessor of the omapfb driver in commit 3c45d05be382 ("OMAPDSS: acx565akm panel: handle gpios in panel driver") in 2012. That driver eventually got replaced by a newer one, which had the bug from the beginning in commit 84192742d9c2 ("OMAPDSS: Add Sony ACX565AKM panel driver") and still exists in fbdev world. That driver has later been copied to omapdrm and then was used as a basis for this driver. Last but not least the omapdrm specific driver has been removed in commit 45f16c82db7e ("drm/omap: displays: Remove unused panel drivers"). Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 1c8fc3f0c5d2 ("drm/panel: Add driver for the Sony ACX565AKM panel") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201127200429.129868-1-sebastian.reichel@collabora.com
2020-10-23drm/panel: mantix: Fix panel resetGuido Günther1-7/+16
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to output an image. Only deasserting RESX is not enough and the display will stay blank. Deassert in prepare() and assert in unprepare() to keep device held in reset when off. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
2020-10-23drm/panel: mantix: Don't dereference NULL modeGuido Günther1-1/+1
Don't dereference mode which was just NULL checked. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
2020-09-10drm/panel: s6e63m0: Add missing MODULE_LICENSEYueHaibing1-0/+4
Kbuild warns when this file is built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o Add the missing license/author/description tags. Fixes: b7b23e447687 ("drm/panel: s6e63m0: Break out SPI transport") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com
2020-09-06drm/panel: s6e63m0: Fix up DRM_DEV* regressionLinus Walleij3-27/+17
Ooops the panel drivers stopped to use DRM_DEV* messages and we predictably create errors by merging code that still use it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20200906132903.5739-1-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Order enable/disable sequenceLinus Walleij1-3/+15
The upstream S6E63M0 driver has some peculiarities around the prepare/enable disable/unprepare sequence: the screen is taken out of sleep in prepare() as part of s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON in enable(). However it is just put into sleep mode directly in disable(). As disable()/enable() can be called without unprepare()/prepare() being called, this is unbalanced, we should take the display out of sleep in enable() then turn it off(). Further MIPI_DCS_SET_DISPLAY_OFF is never called balanced with MIPI_DCS_SET_DISPLAY_ON. The vendor driver for Samsung GT-I8190 (Golden) does all of these things in strict order. Augment the driver to do exit sleep/set display on in enable() and set display off/enter sleep in disable(). Further send an explicit reset pulse in power_on() so we come up in a known state, and issue the MCS_ERROR_CHECK command after setting display on like the vendor driver does. Also use the timings from the vendor driver in the sequence. Doing all of these things makes the display much more stable on the Samsung GT-I8190 when enabling/disabling the display pipeline. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200817213906.88207-1-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add code to identify panelLinus Walleij1-0/+60
We add code to identify a few different panels mounted on the s6e63m0 controller. This is necessary to achieve the proper biasing with DSI versions of the panel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-5-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add reading functionalityLinus Walleij4-2/+43
This adds code to send read commands to read a single byte from the display, in order to perform MTP ID look-up of the mounted panel on the s6e63m0 controller. This is needed for proper biasing on the DSI variants. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-4-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add DSI transportLinus Walleij6-3/+144
This makes it possible to use the s6e63m0 panel with a DSI host, such as in the Samsung GT-I8190 (Golden) mobile phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Break out SPI transportLinus Walleij5-70/+124
This panel can be accessed using both SPI and DSI. To make it possible to probe and use the device also from a DSI bus, first break out the SPI support to its own file. Since all the panel driver does is write DCS commands to the panel, we pass a DCS write function to probe() from each subdriver. We make the Kconfig entry for SPI mode default so all current users will continue to work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/384873/
2020-08-30drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-1/+1
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
2020-08-30drm/panel: rm67191: Remove CLOCK_NON_CONTINUOUS flagRobert Chiras1-2/+1
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver, so it was added to this panel, but not necessary. So, remove this flag since it is not needed. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1598626713-5595-1-git-send-email-robert.chiras@oss.nxp.com
2020-08-30drm/panel: simple: Add AM-1280800N3TZQW-T00HJagan Teki1-0/+29
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-2-jagan@amarulasolutions.com
2020-08-21drm: panel: simple: Add KD116N21-30NV-A010Douglas Anderson1-0/+31
Values come from the vendor and have been tested on hardware. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid
2020-08-20drm/panel: novatek,nt39016: Remove 'dev' field in priv structPaul Cercueil1-6/+4
There is already a 'struct device' pointer in the drm_panel structure, that we can access easily from our priv structure, so there's no need for a separate 'dev' field there. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
2020-08-20drm/panel: novatek,nt39016: Reorder calls in probePaul Cercueil1-3/+3
The drm_panel_of_backlight() function must be called after drm_panel_init(), according to the function's documentation; otherwise the backlight won't be properly initialized. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
2020-08-18drm/panel: Use dev_ based loggingSam Ravnborg15-345/+200
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
2020-08-18drm/panel: sitronix: Use dev_ based loggingSam Ravnborg2-44/+27
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
2020-08-18drm/panel: raydium: Use dev_ based loggingSam Ravnborg2-28/+23
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
2020-08-18drm/panel: leadtek: Use dev_ based loggingSam Ravnborg2-70/+37
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
2020-08-18drm/panel: samsung: Use dev_ based loggingSam Ravnborg6-36/+21
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
2020-08-18drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panelGuido Günther3-0/+340
The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org
2020-08-16drm/panel-simple: Read panel orientationDmitry Osipenko1-0/+11
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the panel-simple driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 07:19:39 +0300