summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2023-10-20drm/msm/dp: Add newlines to debug printksStephen Boyd1-1/+1
[ Upstream commit eba8c99a0fc45da1c8d5b5f5bd1dc2e79229a767 ] These debug printks are missing newlines, causing drm debug logs to be hard to read. Add newlines so that the messages are on their own line. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging") Fixes: cd779808cccd ("drm/msm/dp: Add basic PSR support for eDP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/554533/ Link: https://lore.kernel.org/r/20230825230109.2264345-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflowAbhinav Kumar1-6/+6
[ Upstream commit 95e681ca3b65e4ce3d2537b47672d787b7d30375 ] _dpu_plane_calc_bw() uses integer variables to calculate the bandwidth used during plane bandwidth calculations. However for high resolution displays this overflows easily and leads to below errors [dpu error]crtc83 failed performance check -7 Promote the intermediate variables to u64 to avoid overflow. changes in v2: - change to u64 where actually needed in the math Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Nia Espera <nespera@igalia.com> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/32 Tested-by: Nia Espera <nespera@igalia.com> Patchwork: https://patchwork.freedesktop.org/patch/556288/ Link: https://lore.kernel.org/r/20230908012616.20654-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20drm/msm/dsi: fix irq_of_parse_and_map() error checkingDan Carpenter1-4/+3
[ Upstream commit 6a1d4c7976dd1ee7c9f80bc8e62801ec7b1f2f58 ] The irq_of_parse_and_map() function returns zero on error. It never returns negative error codes. Fix the check. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/557715/ Link: https://lore.kernel.org/r/4f3c5c98-04f7-43f7-900f-5d7482c83eef@moroto.mountain Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20drm/msm/dsi: skip the wait for video mode done if not applicableAbhinav Kumar1-0/+12
[ Upstream commit ab483e3adcc178254eb1ce0fbdfbea65f86f1006 ] dsi_wait4video_done() API waits for the DSI video mode engine to become idle so that we can transmit the DCS commands in the beginning of BLLP. However, with the current sequence, the MDP timing engine is turned on after the panel's pre_enable() callback which can send out the DCS commands needed to power up the panel. During those cases, this API will always timeout and print out the error spam leading to long bootup times and log flooding. Fix this by checking if the DSI video engine was actually busy before waiting for it to become idle otherwise this is a redundant wait. changes in v2: - move the reg read below the video mode check - minor fixes in commit text Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34 Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/557853/ Link: https://lore.kernel.org/r/20230915204426.19011-1-quic_abhinavk@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20drm/msm/dp: do not reinitialize phy unless retry during link trainingKuogee Hsieh1-7/+6
[ Upstream commit 0c1a2e69bcb506f48ebf94bd199bab0b93f66da2 ] DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will cause PLL unlocked initially and then PLL gets locked at the end of initialization. PLL_UNLOCKED interrupt will fire during this time if the interrupt mask is enabled. However currently DP driver link training implementation incorrectly re-initializes PHY unconditionally during link training as the PHY was already configured in dp_ctrl_enable_mainlink_clocks(). Fix this by re-initializing the PHY only if the previous link training failed. [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30 Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/551847/ Link: https://lore.kernel.org/r/1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: added line break in commit text] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13drm/msm/a2xx: Call adreno_gpu_init() earlierFabio Estevam1-4/+4
[ Upstream commit db07ce5da8b26bfeaf437a676ae49bd3bb1eace6 ] The adreno_is_a20x() and adreno_is_a225() functions rely on the GPU revision, but such information is retrieved inside adreno_gpu_init(), which is called afterwards. Fix this problem by caling adreno_gpu_init() earlier, so that the GPU information revision is available when adreno_is_a20x() and adreno_is_a225() run. Tested on a imx53-qsb board. Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/543456/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_doneDmitry Baryshkov1-1/+2
[ Upstream commit d93cf453f51da168f4410ba73656f1e862096973 ] Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to dpu_encoder_helper_wait_for_irq()") the dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather than the IRQ index in phys_enc->intr table, however writeback got the older invocation in place. This was unnoticed for several releases, but now it's time to fix it. Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550924/ Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13drm/msm/mdp5: Don't leak some plane stateDaniel Vetter1-2/+1
[ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ] Apparently no one noticed that mdp5 plane states leak like a sieve ever since we introduced plane_state->commit refcount a few years ago in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Fix it by using the right helpers. Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reported-and-tested-by: dorum@noisolation.com Cc: dorum@noisolation.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/551236/ Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13drm/msm: Update dev core dump to not print backwardsRyan McCann1-1/+1
[ Upstream commit 903705111d863ed8ccf73465da77d232fc422ec1 ] Device core dump add block method adds hardware blocks to dumping queue with stack behavior which causes the hardware blocks to be printed in reverse order. Change the addition to dumping queue data structure from "list_add" to "list_add_tail" for FIFO queue behavior. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546200/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30drm/aperture: Remove primary argumentDaniel Vetter1-1/+1
[ Upstream commit 62aeaeaa1b267c5149abee6b45967a5df3feed58 ] Only really pci devices have a business setting this - it's for figuring out whether the legacy vga stuff should be nuked too. And with the preceding two patches those are all using the pci version of this. Which means for all other callers primary == false and we can remove it now. v2: - Reorder to avoid compile fail (Thomas) - Include gma500, which retained it's called to the non-pci version. v4: - fix Daniel's S-o-b address v5: - add back an S-o-b tag with Daniel's Intel address Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Deepak Rawat <drawat.floss@gmail.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Emma Anholt <emma@anholt.net> Cc: Helge Deller <deller@gmx.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-hyperv@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-4-tzimmermann@suse.de Stable-dep-of: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03drm/msm: Disallow submit with fence id 0Rob Clark1-1/+1
[ Upstream commit 1b5d0ddcb34a605835051ae2950d5cfed0373dd8 ] A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/549180/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03drm/msm: Switch idr_lock to spinlockRob Clark4-11/+9
[ Upstream commit e4f020c6a05db73eac49b7c3b3650251be374200 ] Needed to idr_preload() which returns with preemption disabled. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/527846/ Link: https://lore.kernel.org/r/20230320144356.803762-11-robdclark@gmail.com Stable-dep-of: 1b5d0ddcb34a ("drm/msm: Disallow submit with fence id 0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()Gaosheng Cui1-1/+1
[ Upstream commit 6e8a996563ecbe68e49c49abd4aaeef69f11f2dc ] The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null is catastrophic here, so we should use IS_ERR_OR_NULL() to check the return value. Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/547712/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03drm/msm/adreno: Fix snapshot BINDLESS_DATA sizeRob Clark1-1/+1
[ Upstream commit bd846ceee9c478d0397428f02696602ba5eb264a ] The incorrect size was causing "CP | AHB bus error" when snapshotting the GPU state on a6xx gen4 (a660 family). Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/26 Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Patchwork: https://patchwork.freedesktop.org/patch/546763/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03drm/msm/dpu: drop enum dpu_core_perf_data_bus_idDmitry Baryshkov1-13/+0
[ Upstream commit e8383f5cf1b3573ce140a80bfbfd809278ab16d6 ] Drop the leftover of bus-client -> interconnect conversion, the enum dpu_core_perf_data_bus_id. Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/546048/ Link: https://lore.kernel.org/r/20230707193942.3806526-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dpu: correct MERGE_3D lengthDmitry Baryshkov1-1/+1
[ Upstream commit 9a6c13b847d61b0c3796820ca6e976789df59cd8 ] Each MERGE_3D block has just two registers. Correct the block length accordingly. Fixes: 4369c93cf36b ("drm/msm/dpu: initial support for merge3D hardware block") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/542177/ Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230613001004.3426676-3-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dp: Free resources after unregistering themBjorn Andersson1-1/+1
[ Upstream commit fa0048a4b1fa7a50c8b0e514f5b428abdf69a6f8 ] The DP component's unbind operation walks through the submodules to unregister and clean things up. But if the unbind happens because the DP controller itself is being removed, all the memory for those submodules has just been freed. Change the order of these operations to avoid the many use-after-free that otherwise happens in this code path. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542166/ Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dsi: Remove incorrect references to slice_countJessica Zhang1-10/+16
[ Upstream commit 155fa3a91d64221eb0885fd221cc8085dbef908f ] Currently, slice_count is being used to calculate word count and pkt_per_line. Instead, these values should be calculated using slice per packet, which is not the same as slice_count. Slice count represents the number of slices per interface, and its value will not always match that of slice per packet. For example, it is possible to have cases where there are multiple slices per interface but the panel specifies only one slice per packet. Thus, use the default value of one slice per packet and remove slice_count from the aforementioned calculations. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Fixes: bc6b6ff8135c ("drm/msm/dsi: Use DSC slice(s) packet size to compute word count") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541965/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-5-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dsi: Flip greater-than check for slice_count and slice_per_intfMarijn Suijten1-2/+3
[ Upstream commit 82e72fd22a8f9eff4e75c08be68319008ea90a29 ] According to downstream /and the comment copied from it/ this comparison should be the other way around. In other words, when the panel driver requests to use more slices per packet than what could be sent over this interface, it is bumped down to only use a single slice per packet (and strangely not the number of slices that could fit on the interface). Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/515686/ Link: https://lore.kernel.org/r/20221221231943.1961117-4-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Stable-dep-of: 155fa3a91d64 ("drm/msm/dsi: Remove incorrect references to slice_count") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dsi: Use DSC slice(s) packet size to compute word countMarijn Suijten1-1/+1
[ Upstream commit bc6b6ff8135c4b96787eda88f3baf653939a75ce ] According to downstream the value to use for WORD_COUNT is bytes_per_pkt, which denotes the number of bytes in a packet based on how many slices have been configured by the panel driver times the width of a slice times the number of bytes per pixel. The DSC panels seen thus far use one byte per pixel, only one slice per packet, and a slice width of half the panel width leading to the desired bytes_per_pkt+1 value to be equal to hdisplay/2+1. This however isn't the case anymore for panels that configure two slices per packet, where the value should now be hdisplay+1. Note that the aforementioned panel (on a Sony Xperia XZ3, sdm845) with slice_count=1 has also been tested to successfully accept slice_count=2, which would have shown corrupted output previously. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/515694/ Link: https://lore.kernel.org/r/20221221231943.1961117-3-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Stable-dep-of: 155fa3a91d64 ("drm/msm/dsi: Remove incorrect references to slice_count") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dpu: Fix slice_last_group_size calculationJessica Zhang1-2/+3
[ Upstream commit c223059e6f8340f7eac2319470984cbfc39c433b ] Correct the math for slice_last_group_size so that it matches the calculations downstream. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539269/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-7-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dpu: do not enable color-management if DSPPs are not availableDmitry Baryshkov1-1/+4
[ Upstream commit 3bcfc7b90465efd337d39b91b43972162f0d1908 ] We can not support color management without DSPP blocks being provided in the HW catalog. Do not enable color management for CRTCs if num_dspps is 0. Fixes: 4259ff7ae509 ("drm/msm/dpu: add support for pcc color block in dpu driver") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Tested-by: Yongqin Liu <yongqin.liu@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542141/ Link: https://lore.kernel.org/r/20230612182534.3345805-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/a5xx: really check for A510 in a5xx_gpu_initDmitry Baryshkov1-1/+2
[ Upstream commit 736a9327365644b460e4498b1ce172ca411efcbc ] The commit 010c8bbad2cb ("drm: msm: adreno: Disable preemption on Adreno 510") added special handling for a510 (this SKU doesn't seem to support preemption, so the driver should clamp nr_rings to 1). However the gpu->revn is not yet set (it is set later, in adreno_gpu_init()) and thus the condition is always false. Check config->rev instead. Fixes: 010c8bbad2cb ("drm: msm: adreno: Disable preemption on Adreno 510") Reported-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Adam Skladowski <a39.skl@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/531511/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush registerKuogee Hsieh1-1/+1
[ Upstream commit 12cef323c903bd8b13d1f6ff24a9695c2cdc360b ] The CTL_FLUSH register should be programmed with the 22th bit (DSC_IDX) to flush the DSC hardware blocks, not the literal value of 22 (which corresponds to flushing VIG1, VIG2 and RGB1 instead). Changes in V12: -- split this patch out of "separate DSC flush update out of interface" Changes in V13: -- rewording the commit text Changes in V14: -- drop 'DSC" from "The DSC CTL_FLUSH register" at commit text Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/539496/ Link: https://lore.kernel.org/r/1685036458-22683-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASKKonrad Dybcio1-2/+5
[ Upstream commit a7129231edf329a00e92dbd2d741f6da728a4a06 ] DPU5 and newer targets enable this unconditionally. Move it from the SC7280 mask to the SC7180 one. Fixes: 7e6ee55320f0 ("drm/msm/disp/dpu1: enable DATA_HCTL_EN for sc7280 target") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/538159/ Link: https://lore.kernel.org/r/20230508-topic-hctl_en-v2-1-e7bea9f1f5dd@linaro.org [DB: removed BIT(DPU_INTF_DATA_COMPRESS), which is not yet merged] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/disp/dpu: get timing engine status from intf status registerVinod Polimera3-7/+16
[ Upstream commit e3969eadc8ee78a5bdca65b8ed0a421a359e4090 ] Recommended way of reading the interface timing gen status is via status register. Timing gen status register will give a reliable status of the interface especially during ON/OFF transitions. This support was added from DPU version 5.0.0. Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524724/ Link: https://lore.kernel.org/r/1677774797-31063-6-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Stable-dep-of: a7129231edf3 ("drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19drm/msm/dsi: don't allow enabling 14nm VCO with unprogrammed rateDmitry Baryshkov1-0/+3
[ Upstream commit 1e0a97f84d73ea1182740f62069690c7f3271abb ] If the dispcc uses CLK_OPS_PARENT_ENABLE (e.g. on QCM2290), CCF can try enabling VCO before the rate has been programmed. This can cause clock lockups and/or other boot issues. Program the VCO to the minimal PLL rate if the read rate is 0 Hz. Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Patchwork: https://patchwork.freedesktop.org/patch/534813/ Link: https://lore.kernel.org/r/20230501011257.3460103-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09drm/msm: Be more shouty if per-process pgtables aren't workingRob Clark1-1/+6
[ Upstream commit 5c054db54c43a5fcb5cc81012361f5e3fac37637 ] Otherwise it is not always obvious if a dt or iommu change is causing us to fall back to global pgtable. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/537359/ Link: https://lore.kernel.org/r/20230516222039.907690-2-robdclark@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24drm/msm: Fix submit error-path leaksRob Clark1-7/+18
[ Upstream commit 68dc6c2d5eec45515855cce99256162f45651a0b ] For errors after msm_submitqueue_get(), we need to drop the submitqueue reference. Additionally after get_unused_fd() we need to drop the fd. The ordering for dropping the queue lock and put_unused_fd() is not important, so just move this all into out_post_unlock. v2: Only drop queue ref if submit doesn't take it v3: Fix unitialized submit ref in error path v4: IS_ERR_OR_NULL() Reported-by: pinkperfect2021@gmail.com Fixes: f0de40a131d9 drm/msm: ("Reorder lock vs submit alloc") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/536073/ Link: https://lore.kernel.org/r/20230509203041.440619-1-robdclark@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24drm/msm/dpu: Remove duplicate register defines from INTFMarijn Suijten1-5/+0
[ Upstream commit 202c044203ac5860e3025169105368d99f9bc6a2 ] The INTF_FRAME_LINE_COUNT_EN, INTF_FRAME_COUNT and INTF_LINE_COUNT registers are already defined higher up, in the right place when sorted numerically. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/534231/ Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-8-27ce1a5ab5c6@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24drm/msm/dpu: Move non-MDP_TOP INTF_INTR offsets out of hwio headerMarijn Suijten2-4/+4
[ Upstream commit e9d9ce5462fecdeefec87953de71df4d025cbc72 ] These offsets do not fall under the MDP TOP block and do not fit the comment right above. Move them to dpu_hw_interrupts.c next to the repsective MDP_INTF_x_OFF interrupt block offsets. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/534203/ Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-3-27ce1a5ab5c6@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24drm/msm/dpu: Assign missing writeback log_maskMarijn Suijten1-0/+1
[ Upstream commit a432fc31f03db2546a48bcf5dd69ca28ceb732bf ] The WB debug log mask ended up never being assigned, leading to writes to this block to never be logged even if the mask is enabled in dpu_hw_util_log_mask via debugfs. Fixes: 84a33d0fd921 ("drm/msm/dpu: add dpu_hw_wb abstraction for writeback blocks") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/533860/ Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-1-e8d869eea455@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24drm/msm/dp: unregister audio driver during unbindSrinivas Kandagatla3-0/+15
[ Upstream commit 85c636284cb63b7740b4ae98881ace92158068d3 ] while binding the code always registers a audio driver, however there is no corresponding unregistration done in unbind. This leads to multiple redundant audio platform devices if dp_display_bind and dp_display_unbind happens multiple times during startup. On X13s platform this resulted in 6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports. Fix this by unregistering codecs on unbind. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/533324/ Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24drm/msm/dp: Clean up handling of DP AUX interruptsDouglas Anderson3-48/+36
[ Upstream commit b20566cdef05cd40d95f10869d2a7646f48b1bbe ] The DP AUX interrupt handling was a bit of a mess. * There were two functions (one for "native" transfers and one for "i2c" transfers) that were quite similar. It was hard to say how many of the differences between the two functions were on purpose and how many of them were just an accident of how they were coded. * Each function sometimes used "else if" to test for error bits and sometimes didn't and again it was hard to say if this was on purpose or just an accident. * The two functions wouldn't notice whether "unknown" bits were set. For instance, there seems to be a bit "DP_INTR_PLL_UNLOCKED" and if it was set there would be no indication. * The two functions wouldn't notice if more than one error was set. Let's fix this by being more consistent / explicit about what we're doing. By design this could cause different handling for AUX transfers, though I'm not actually aware of any bug fixed as a result of this patch (this patch was created because we simply noticed how odd the old code was by code inspection). Specific notes here: 1. In the old native transfer case if we got "done + wrong address" we'd ignore the "wrong address" (because of the "else if"). Now we won't. 2. In the old native transfer case if we got "done + timeout" we'd ignore the "timeout" (because of the "else if"). Now we won't. 3. In the old native transfer case we'd see "nack_defer" and translate it to the error number for "nack". This differed from the i2c transfer case where "nack_defer" was given the error number for "nack_defer". This 100% can't matter because the only user of this error number treats "nack defer" the same as "nack", so it's clear that the difference between the "native" and "i2c" was pointless here. 4. In the old i2c transfer case if we got "done" plus any error besides "nack" or "defer" then we'd ignore the error. Now we don't. 5. If there is more than one error signaled by the hardware it's possible that we'll report a different one than we used to. I don't know if this matters. If someone is aware of a case this matters we should document it and change the code to make it explicit. 6. One quirk we keep (I don't know if this is important) is that in the i2c transfer case if we see "done + defer" we report that as a "nack". That seemed too intentional in the old code to just drop. After this change we will add extra logging, including: * A warning if we see more than one error bit set. * A warning if we see an unexpected interrupt. * A warning if we get an AUX transfer interrupt when shouldn't. It actually turns out that as a result of this change then at boot we sometimes see an error: [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy That means that, during init, we are seeing DP_INTR_PLL_UNLOCKED. For now I'm going to say that leaving this error reported in the logs is OK-ish and hopefully it will encourage someone to track down what's going on at init time. One last note here is that this change renames one of the interrupt bits. The bit named "i2c done" clearly was used for native transfers being done too, so I renamed it to indicate this. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/520658/ Link: https://lore.kernel.org/r/20230126170745.v2.1.I90ffed3ddd21e818ae534f820cb4d6d8638859ab@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17drm/msm: fix missing wq allocation error handlingJohan Hovold1-0/+4
[ Upstream commit ca090c837b430752038b24e56dd182010d77f6f6 ] Add the missing sanity check to handle workqueue allocation failures. Fixes: c8afe684c95c ("drm/msm: basic KMS driver for snapdragon") Cc: stable@vger.kernel.org # 3.12 Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525102/ Link: https://lore.kernel.org/r/20230306100722.28485-8-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17drm/msm: Hangcheck progress detectionRob Clark6-3/+109
[ Upstream commit d73b1d02de0858b96f743e1e8b767fb092ae4c1b ] If the hangcheck timer expires, check if the fw's position in the cmdstream has advanced (changed) since last timer expiration, and allow it up to three additional "extensions" to it's alotted time. The intention is to continue to catch "shader stuck in a loop" type hangs quickly, but allow more time for things that are actually making forward progress. Because we need to sample the CP state twice to detect if there has not been progress, this also cuts the the timer's duration in half. v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment v3: Only halve hangcheck timer duration for generations which support progress detection (hdanton); removed unused a5xx progress (without knowing how to adjust for data buffered in ROQ it is too likely to report a false negative) v4: Comment updates to better describe the total hangcheck duration when progress detection is applied Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/511584/ Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com Stable-dep-of: ca090c837b43 ("drm/msm: fix missing wq allocation error handling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17drm/msm/adreno: Simplify read64/write64 helpersRob Clark6-46/+27
[ Upstream commit cade05b2a88558847984287dd389fae0c7de31d6 ] The _HI reg is always following the _LO reg, so no need to pass these offsets seprately. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/511581/ Link: https://lore.kernel.org/r/20221114193049.1533391-2-robdclark@gmail.com Stable-dep-of: ca090c837b43 ("drm/msm: fix missing wq allocation error handling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17drm/msm/adreno: adreno_gpu: Use suspend() instead of idle() on load errorKonrad Dybcio1-1/+1
commit 3eeca5e5f3100435b06a5b5d86daa3d135a8a4bd upstream. The adreno_load_gpu() path is guarded by an error check on adreno_load_fw(). This function is responsible for loading Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it does not take the vendor-signed ZAP blob into account. By embedding the SQE (and GMU, if necessary) firmware into the initrd/kernel, we can trigger and unfortunate path that would not bail out early and proceed with gpu->hw_init(). That will fail, as the ZAP loader path will not find the firmware and return back to adreno_load_gpu(). This error path involves pm_runtime_put_sync() which then calls idle() instead of suspend(). This is suboptimal, as it means that we're not going through the clean shutdown sequence. With at least A619_holi, this makes the GPU not wake up until it goes through at least one more start-fail-stop cycle. The pm_runtime_put_sync that appears in the error path actually does not guarantee that because of the earlier enabling of runtime autosuspend. Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown. Test cases: 1. All firmware baked into kernel 2. error loading ZAP fw in initrd -> load from rootfs at DE start Both succeed on A619_holi (SM6375) and A630 (SDM845). Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/530001/ Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17drm/msm: fix workqueue leak on bind errorsJohan Hovold1-1/+4
commit a75b49db6529b2af049eafd938fae888451c3685 upstream. Make sure to destroy the workqueue also in case of early errors during bind (e.g. a subcomponent failing to bind). Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with drmm_") the mode config will be freed when the drm device is released also when using the legacy interface, but add an explicit cleanup for consistency and to facilitate backporting. Fixes: 060530f1ea67 ("drm/msm: use componentised device support") Cc: stable@vger.kernel.org # 3.15 Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525093/ Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17drm/msm: fix vram leak on bind errorsJohan Hovold1-7/+19
commit 60d476af96015891c7959f30838ae7a9749932bf upstream. Make sure to release the VRAM buffer also in a case a subcomponent fails to bind. Fixes: d863f0c7b536 ("drm/msm: Call msm_init_vram before binding the gpu") Cc: stable@vger.kernel.org # 5.11 Cc: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525094/ Link: https://lore.kernel.org/r/20230306100722.28485-7-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17drm/msm: fix drm device leak on bind errorsJohan Hovold1-2/+8
commit 214b09db61978497df24efcb3959616814bca46b upstream. Make sure to free the DRM device also in case of early errors during bind(). Fixes: 2027e5b3413d ("drm/msm: Initialize MDSS irq domain at probe time") Cc: stable@vger.kernel.org # 5.17 Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525097/ Link: https://lore.kernel.org/r/20230306100722.28485-6-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17drm/msm: fix NULL-deref on irq uninstallJohan Hovold1-3/+5
commit cd459c005de3e2b855a8cc7768e633ce9d018e9f upstream. In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces") Cc: stable@vger.kernel.org # 5.14 Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525104/ Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17drm/msm: fix NULL-deref on snapshot tear downJohan Hovold1-1/+2
commit a465353b9250802f87b97123e33a17f51277f0b1 upstream. In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Cc: stable@vger.kernel.org # 5.14 Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525099/ Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17drm/msm/adreno: fix runtime PM imbalance at gpu loadJohan Hovold1-4/+12
commit 0d997f95b70f98987ae031a89677c13e0e223670 upstream. A recent commit moved enabling of runtime PM to GPU load time (first open()) but failed to update the error paths so that runtime PM is disabled if initialisation of the GPU fails. This would trigger a warning about the unbalanced disable count on the next open() attempt. Note that pm_runtime_put_noidle() is sufficient to balance the usage count when pm_runtime_put_sync() fails (and is chosen over pm_runtime_resume_and_get() for consistency reasons). Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()") Cc: stable@vger.kernel.org # 6.0 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/524971/ Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11drm: msm: adreno: Disable preemption on Adreno 510Adam Skladowski1-1/+7
[ Upstream commit 010c8bbad2cb8c33c47963e29f051f1e917e45a5 ] Downstream driver appears to not support preemption on A510 target, trying to use one make device slow and fill log with rings related errors. Set num_rings to 1 to disable preemption. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: e20c9284c8f2 ("drm/msm/adreno: Add support for Adreno 510 GPU") Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/526898/ Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11drm/msm/adreno: drop bogus pm_runtime_set_active()Johan Hovold1-3/+0
[ Upstream commit db7662d076c973072d788bd0e8130e04430307a1 ] The runtime PM status can only be updated while runtime PM is disabled. Drop the bogus pm_runtime_set_active() call that was made after enabling runtime PM and which (incidentally but correctly) left the runtime PM status set to 'suspended'. Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/524972/ Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11drm/msm/disp/dpu: check for crtc enable rather than crtc active to release ↵Vinod Polimera1-1/+1
shared resources [ Upstream commit b6975693846b562c4d3e0e60cc884affc5bdac00 ] According to KMS documentation, The driver must not release any shared resources if active is set to false but enable still true. Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset") Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524726/ Link: https://lore.kernel.org/r/1677774797-31063-5-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06drm/msm/disp/dpu: fix sc7280_pp base offsetKuogee Hsieh1-1/+1
[ Upstream commit ce68153edb5b36ddf87a19ed5a85131498690bbf ] At sc7280, pingpong block is used to management the dither effects to reduce distortion at panel. Currently pingpong-0 base offset is wrongly set at 0x59000. This mistake will not cause system to crash. However it will make dither not work. This patch correct sc7280 ping pong-0 block base offset. Changes in v2: -- add more details info n regrading of pingpong block at commit text Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524332/ Link: https://lore.kernel.org/r/1677533800-3125-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06drm/msm/dpu: correct sm8250 and sm8350 scalerDmitry Baryshkov1-9/+9
[ Upstream commit 03c0c3cb22a4ff29afba1b43f0330289ea80433f ] QSEED4 is a newer variant of QSEED3LITE, which should be used on sm8250 and sm8350. Fix the DPU caps structure and used feature masks. Fixes: d21fc5dfc3df ("drm/msm/dpu1: add support for qseed3lite used on sm8250") Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/522229/ Link: https://lore.kernel.org/r/20230211231259.1308718-10-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06drm/msm/dpu: Refactor sc7280_pp locationRobert Foss1-7/+7
[ Upstream commit 1a5b5372e3b0a4cc65a0cbb724b1b0859f4ac63c ] The sc7280_pp declaration is not located by the other _pp declarations, but rather hidden around the _merge_3d declarations. Let's fix this to avoid confusion. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/509153/ Link: https://lore.kernel.org/r/20221028120812.339100-3-robert.foss@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Stable-dep-of: 03c0c3cb22a4 ("drm/msm/dpu: correct sm8250 and sm8350 scaler") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 06:29:23 +0300