summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2020-01-27drm/msm/dsi: Implement reset correctlyJeffrey Hugo1-2/+4
[ Upstream commit 78e31c42261779a01bc73472d0f65f15378e9de3 ] On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation. The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset. wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous. Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Cc: Hai Li <hali@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Sean Paul <sean@poorly.run> [seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27drm/msm/a3xx: remove TPL1 regs from snapshotRob Clark1-13/+11
[ Upstream commit f47bee2ba447bebc304111c16ef1e1a73a9744dd ] These regs are write-only, and the hw throws a hissy-fit (ie. reboots) when we try to read them for GPU state snapshot, in response to a GPU hang. It is rather impolite when GPU recovery triggers an insta- reboot, so lets remove the TPL1 registers from the snapshot. Fixes: 7198e6b03155 drm/msm: add a3xx gpu support Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27drm/msm/mdp5: Fix mdp5_cfg_init error returnJeffrey Hugo1-1/+1
[ Upstream commit fc19cbb785d7bbd1a1af26229b5240a3ab332744 ] If mdp5_cfg_init fails because of an unknown major version, a null pointer dereference occurs. This is because the caller of init expects error pointers, but init returns NULL on error. Fix this by returning the expected values on error. Fixes: 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module) Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25drm: msm: Fix add_gpu_componentsJeffrey Hugo1-1/+2
[ Upstream commit 9ca7ad6c7706edeae331c1632d0c63897418ebad ] add_gpu_components() adds found GPU nodes from the DT to the match list, regardless of the status of the nodes. This is a problem, because if the nodes are disabled, they should not be on the match list because they will not be matched. This prevents display from initing if a GPU node is defined, but it's status is disabled. Fix this by checking the node's status before adding it to the match list. Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding) Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31drm/msm: Depopulate platform on probe failureSean Paul1-3/+11
[ Upstream commit 4368a1539c6b41ac3cddc06f5a5117952998804c ] add_display_components() calls of_platform_populate, and we depopluate on pdev remove, but not when probe fails. So if we get a probe deferral in one of the components, we won't depopulate the platform. This causes the core to keep references to devices which should be destroyed, which causes issues when those same devices try to re-initialize on the next probe attempt. I think this is the reason we had issues with the gmu's device-managed resources on deferral (worked around in commit 94e3a17f33a5). Reviewed-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-3-sean@poorly.run Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/msm: a5xx: fix possible object reference leakWen Yang1-4/+6
[ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sharat Masetty <smasetty@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drm/msm: Unblock writer if reader closes fileKristian H. Kristensen1-1/+6
[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ] Prevents deadlock when fifo is full and reader closes file. Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: Fix error return checkingWen Yang1-1/+1
[ Upstream commit 098336deb946f37a70afc0979af388b615c378bf ] The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21drm/msm: Grab a vblank reference when waiting for commit_doneSean Paul1-0/+5
[ Upstream commit 3b712e43e3876b42b38321ecf790a1f5fe59c834 ] Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-08drm/msm: fix OF child-node lookupJohan Hovold1-2/+3
commit f9a7082327e26f54067a49cac2316d31e0cc8ba7 upstream. Use the new of_get_compatible_child() helper to lookup the legacy pwrlevels child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the probed device's node). While at it, also fix the related child-node reference leak. Fixes: e2af8b6b0ca1 ("drm/msm: gpu: Use OPP tables if we can") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> [ johan: backport to 4.14 ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20drm/msm: don't deref error pointer in the msm_fbdev_create error pathEmil Velikov1-9/+2
[ Upstream commit 789d4c300e10eb2096ee83c3497118e67ccc951e ] Currently the error pointer returned by msm_alloc_stolen_fb gets passed to drm_framebuffer_remove. The latter handles only NULL pointers, thus a nasty crash will occur. Drop the unnecessary fail label and the associated checks - both err and fb will be set at this stage. Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20drm/msm/dsi: use correct enum in dsi_get_cmd_fmtStefan Agner1-1/+1
[ Upstream commit a4af89286f8fc382459308764ea05935dc477cdc ] The function dsi_get_cmd_fmt returns enum dsi_cmd_dst_format, use the correct enum value also for MIPI_DSI_FMT_RGB666/_PACKED. This has been discovered using clang: drivers/gpu/drm/msm/dsi/dsi_host.c:743:35: warning: implicit conversion from enumeration type 'enum dsi_vid_dst_format' to different enumeration type 'enum dsi_cmd_dst_format' [-Wenum-conversion] case MIPI_DSI_FMT_RGB666: return VID_DST_FORMAT_RGB666; ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20drm/msm: Fix possible null dereference on failure of get_pages()Ben Hutchings1-9/+11
[ Upstream commit 3976626ea3d2011f8fd3f3a47070a8b792018253 ] Commit 62e3a3e342af changed get_pages() to initialise msm_gem_object::pages before trying to initialise msm_gem_object::sgt, so that put_pages() would properly clean up pages in the failure case. However, this means that put_pages() now needs to check that msm_gem_object::sgt is not null before trying to clean it up, and this check was only applied to part of the cleanup code. Move it all into the conditional block. (Strictly speaking we don't need to make the kfree() conditional, but since we can't avoid checking for null ourselves we may as well do so.) Fixes: 62e3a3e342af ("drm/msm: fix leak in failed get_pages") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12clk: divider: fix incorrect usage of container_ofJerome Brunet1-1/+1
[ Upstream commit 12a26c298d2a8b1cab498533fa65198e49e3afd3 ] divider_recalc_rate() is an helper function used by clock divider of different types, so the structure containing the 'hw' pointer is not always a 'struct clk_divider' At the following line: > div = _get_div(table, val, flags, divider->width); in several cases, the value of 'divider->width' is garbage as the actual structure behind this memory is not a 'struct clk_divider' Fortunately, this width value is used by _get_val() only when CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so far when the structure is not a 'struct clk_divider'. This is probably why we did not notice this bug before Fixes: afe76c8fd030 ("clk: allow a clk divider with max divisor when zero") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24drm/msm: fix leak in failed get_pagesPrakash Kamliya1-4/+10
[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ] get_pages doesn't keep a reference of the pages allocated when it fails later in the code path. This can lead to a memory leak. Keep reference of the allocated pages so that it can be freed when msm_gem_free_object gets called later during cleanup. Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12drm/msm: fix _NO_IMPLICIT fencing caseRob Clark2-17/+18
We need to call reservation_object_reserve_shared() in both cases, but this wasn't happening in the _NO_IMPLICIT submit case. Fixes: f0a42bb ("drm/msm: submit support for in-fences") Reported-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm: fix error path cleanupRob Clark1-1/+2
If we fail to attach iommu, gpu->aspace could be IS_ERR().. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm/mdp5: Remove extra pm_runtime_put call in mdp5_crtc_cursor_set()Archit Taneja1-2/+0
While converting mdp5_enable/disable() calls to pm_runtime_get/put() API, an extra call to pm_runtime_put_autosuspend() crept in mdp5_crtc_cursor_set(). This results in calling the suspend handler twice, and therefore clk_disables twice, which isn't a nice thing to do. Fixes: d68fe15b1878 (drm/msm/mdp5: Use runtime PM get/put API instead ...) Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm/dsi: Use correct pm_runtime_put variant during host_initArchit Taneja1-1/+1
The DSI runtime PM suspend/resume callbacks check whether msm_host->cfg_hnd is non-NULL before trying to enable the bus clocks. This is done to accommodate early calls to these functions that may happen before the bus clocks are even initialized. Calling pm_runtime_put_autosuspend() in dsi_host_init() can result in racy behaviour since msm_host->cfg_hnd is set very soon after. If the suspend callback happens too late, we end up trying to disable clocks that were never enabled, resulting in a bunch of WARN_ON splats. Use pm_runtime_put_sync() so that the suspend callback is called immediately. Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm: fix return value check in _msm_gem_kernel_new()Wei Yongjun1-2/+2
In case of error, the function msm_gem_get_vaddr() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 8223286d62e2 ("drm/msm: Add a helper function for in-kernel buffer allocations") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm: use proper memory barriers for updating tail/headRob Clark1-2/+10
Fixes intermittent corruption of cmdstream dump. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm/mdp5: add missing max size for 8x74 v1Rob Clark1-0/+2
This should have same max width as v2. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-09-14mm: treewide: remove GFP_TEMPORARY allocation flagMichal Hocko1-1/+1
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25Merge tag 'drm-msm-next-2017-08-22' of ↵Dave Airlie31-273/+574
git://people.freedesktop.org/~robclark/linux into drm-next Updates for 4.14.. I have some further patches from Jordan to add multiple priority levels and pre-emption, but those will probably be for 4.15 to give me time for the mesa parts. * tag 'drm-msm-next-2017-08-22' of git://people.freedesktop.org/~robclark/linux: drm/msm/mdp5: mark runtime_pm functions as __maybe_unused drm/msm: remove unused variable drm/msm/mdp5: make helper function static drm/msm: make msm_framebuffer_init() static drm/msm: add helper to allocate stolen fb drm/msm: don't track fbdev's gem object separately drm/msm: add modeset module param drm/msm/mdp5: add tracking for clk enable-count drm/msm: remove unused define drm/msm: Add a helper function for in-kernel buffer allocations drm/msm: Attach the GPU MMU when it is created drm/msm: Add A5XX hardware fault detection drm/msm: Remove uneeded platform dev members drm/msm/mdp5: Set up runtime PM for MDSS drm/msm/mdp5: Write to SMP registers even if allocations don't change drm/msm/mdp5: Don't use mode_set helper funcs for encoders and CRTCs drm/msm/dsi: Implement RPM suspend/resume callbacks drm/msm/dsi: Set up runtime PM for DSI drm/msm/hdmi: Set up runtime PM for HDMI drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks
2017-08-22drm/msm/mdp5: mark runtime_pm functions as __maybe_unusedArnd Bergmann1-2/+2
When CONFIG_PM is disabled, we get harmless warnings about unused functions: drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1025:12: error: 'mdp5_runtime_resume' defined but not used [-Werror=unused-function] static int mdp5_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1015:12: error: 'mdp5_runtime_suspend' defined but not used [-Werror=unused-function] static int mdp5_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~ This marks both functions as __maybe_unused so the compiler can drop them silently. Fixes: d68fe15b1878 ("drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: remove unused variableArnd Bergmann1-1/+0
A cleanup left behind an unused variable that we have to remove in order to avoid this harmless warning: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'a5xx_zap_shader_init': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:493:19: error: unused variable 'a5xx_gpu' [-Werror=unused-variable] Fixes: 8d6f08272b6f ("drm/msm: Remove uneeded platform dev members") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm/mdp5: make helper function staticRob Clark1-1/+1
Not needed outside of mdp5_crtc.c. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: make msm_framebuffer_init() staticRob Clark2-3/+3
Only needed in msm_fb.c so don't export it. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: add helper to allocate stolen fbRob Clark3-28/+50
We'll later want to re-use this for state-readback when bootloader enables display, so that we can create an fb for the initial plane->state->fb. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: don't track fbdev's gem object separatelyRob Clark1-15/+19
The drm_framebuffer is refcnt'd these days and will unref the underlying bo as needed. So we can simplify a little. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: add modeset module paramRob Clark1-0/+7
At least for debugging it is nice to have an easy way to force the driver not to load. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm/mdp5: add tracking for clk enable-countRob Clark2-0/+9
Accessing registers for an unclocked block is an insta-reboot on snapdragon devices. So add a bit of logic to track the enable_count so we can WARN_ON() unclocked register writes. This makes it much easier to track down mistakes. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: remove unused defineRob Clark1-2/+0
Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: Add a helper function for in-kernel buffer allocationsJordan Crouse6-54/+72
Nearly all of the buffer allocations for kernel allocate an buffer object, virtual address and GPU iova at the same time. Make a helper function to handle the details. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [dropped msm_fbdev conversion to new helper, since it interferes with display-handover work, where we want to separate allocation and mapping] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: Attach the GPU MMU when it is createdJordan Crouse3-55/+62
Currently the GPU MMU is attached in the adreno_gpu code but as more and more of the GPU initialization moves to the generic GPU path we have a need to map and use GPU memory earlier and earlier. There isn't any reason to defer attaching the MMU until later so attach it right after the address space is created so it can be used immediately. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-17Merge tag 'drm-misc-next-2017-08-16' of ↵Dave Airlie1-1/+0
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: - vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric) Cross-subsystem Changes: - vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained in staging Core Changes: - atomic_legacy_backoff is officially killed (Daniel) - Extract drm_device.h (Daniel) - Unregister drm device on unplug (Daniel) - Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir) Driver Changes: - vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric) - various: Make various drm_*_funcs structs const (Bhumika) - tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David) - various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Cihangir Akturk <cakturk@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits) drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset() drm/virtio: Use the drm_driver.dumb_destroy default drm/bochs: Use the drm_driver.dumb_destroy default drm/mgag200: Use the drm_driver.dumb_destroy default drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults drm/msm: Use the drm_driver.dumb_destroy default drm/ast: Use the drm_driver.dumb_destroy default drm/qxl: Use the drm_driver.dumb_destroy default drm/udl: Use the drm_driver.dumb_destroy default drm/cirrus: Use the drm_driver.dumb_destroy default drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults drm/meson: Use .dumb_map_offset and .dumb_destroy defaults drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults drm/vc4: Continue the switch to drm_*_put() helpers drm/vc4: Fix leak of HDMI EDID dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2 dma-buf: add reservation_object_copy_fences (v2) drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD ...
2017-08-16drm/msm: Use the drm_driver.dumb_destroy defaultNoralf Trønnes1-1/+0
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-13-git-send-email-noralf@tronnes.org
2017-08-15Backmerge tag 'v4.13-rc5' into drm-nextDave Airlie12-145/+116
Linux 4.13-rc5 There's a really nasty nouveau collision, hopefully someone can take a look once I pushed this out.
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter4-4/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-08-08drm: Nuke drm_atomic_helper_plane_set_propertyDaniel Vetter1-2/+0
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-08drm: Nuke drm_atomic_helper_crtc_set_propertyDaniel Vetter2-3/+0
It's dead code because this is now handled in the core. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-08-02drm/msm: Add A5XX hardware fault detectionJordan Crouse1-0/+26
The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm: Remove uneeded platform dev membersJordan Crouse6-9/+1
Commit eeb754746b14 ("drm/msm/gpu: use pm-runtime") adds a pointer for the GPU platform device to the msm_gpu struct so we can happily remove the same pointers from the individual GPU structs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Set up runtime PM for MDSSArchit Taneja3-8/+86
MDSS represents the top level wrapper that contains MDP5, DSI, HDMI and other sub-blocks. W.r.t device heirarchy, it's the parent of all these devices. The power domain of this device is actually tied to the GDSC hw. When any sub-device enables its PD, MDSS's PD is also enabled. The suspend/resume ops enable the top level clocks that end at the MDSS boundary. For now, we're letting them all be optional, since the child devices anyway hold a ref to these clocks. Until now, we'd called a runtime_get() during probe, which ensured that the GDSC was always on. Now that we've set up runtime PM for the children devices, we can get rid of this hack. Note: that the MDSS device is the platform_device in msm_drv.c. The msm_runtime_suspend/resume ops call the funcs that enable/disable the top level MDSS clocks. This is different from MDP4, where the platform device created in msm_drv.c represents MDP4 itself. It would have been nicer to hide these differences by adding new kms funcs, but runtime PM needs to be enabled before kms is set up (i.e, msm_kms_init is called). Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Write to SMP registers even if allocations don't changeArchit Taneja1-8/+51
Requests for assigning/freeing SMP blocks by planes are collected during the atomic check phase, and represented by mdp5_smp_state's 'assigned' and 'released' members. Once the atomic state is committed, these members are reset to 0, indicating that the existing configuration satisfies all the planes. Future atomic commits will copy the old mdp5_smp_state, and the 'assigned' and 'released' members would be updated only if there was a change in the plane configurations. When we disable and re-enable display, we lose the values we wrote to the SMP registers, but the code doesn't program the registers because there isn't any change in mdp5_smp_state. Fix this by writing to the registers irrespective of whether there was a change in SMP state or not. We do this by keeping a cache of the register values, and write them every time we commit a state. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Don't use mode_set helper funcs for encoders and CRTCsArchit Taneja2-2/+7
We shouldn't use use mode_set/mode_set_nofb helpers when we use runtime PM. The registers configured in these funcs lose their state when we eventually enable the display pipeline. Do not implement these vfuncs in the helpers, and call them in the crtc_enable/encoder_enable paths instead. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/dsi: Implement RPM suspend/resume callbacksArchit Taneja3-41/+49
The bus clocks are always enabled/disabled along with the power domain, so move it to the runtime suspend/resume ops. This cleans up the clock code a bit. Get rid of the clk_mutex mutex since it isn't needed. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/dsi: Set up runtime PM for DSIArchit Taneja2-1/+12
Call the pm_runtime_get/put API where we need the clocks enabled. The main entry/exit points are 1) enabling/disabling the DSI bridge and 2) Sending commands from the DSI host to the device. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/hdmi: Set up runtime PM for HDMIArchit Taneja3-19/+50
Enable rudimentary runtime PM in the HDMI driver. We can't really do agressive PM toggling at the moment because we need to leave the hpd clocks enabled all the time. There isn't much benefit of creating suspend/resume ops to toggle clocks either. We just make sure that we configure the power domain in the HDMI bridge's enable/disable paths, and the HDMI connector's detect() op. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 03:19:59 +0300