summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
10 daysdrm/msm/dpu: Add missing NULL pointer check for pingpong interfaceNikolay Kuratov1-6/+4
commit 88733a0b64872357e5ecd82b7488121503cb9cc6 upstream. It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a single place the check is missing. Also use convenient locals instead of phys_enc->* where available. Cc: stable@vger.kernel.org Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/693860/ Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysdrm/msm/a6xx: Fix out of bound IO access in a6xx_get_gmu_registersAkhil P Oommen1-1/+1
commit 779b68a5bf2764c8ed3aa800e41ba0d5d007e1e7 upstream. REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register range. So, use gmu_write() routines to write to this register. Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/688993/ Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysdrm/msm/a2xx: stop over-complaining about the legacy firmwareDmitry Baryshkov1-1/+1
[ Upstream commit a3a22373fce576560757f5616eb48dbf85891d9c ] If the rootfs have a legacy A200 firmware, currently the driver will complain each time the hw is reinited (which can happen a lot). E.g. with GL testsuite the hw is reinited after each test, spamming the console. Make sure that the message is printed only once: when we detect the firmware that doesn't support protection. Fixes: 302295070d3c ("drm/msm/a2xx: support loading legacy (iMX) firmware") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/688098/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24drm/msm: make sure to not queue up recovery more than onceAntonino Maniscalco1-0/+3
[ Upstream commit 10fb1b2fcaee5545a5e54db1ed4d7b15c2db50c8 ] If two fault IRQs arrive in short succession recovery work will be queued up twice. When recovery runs a second time it may end up killing an unrelated context. Prevent this by masking off interrupts when triggering recovery. Signed-off-by: Antonino Maniscalco <antomani103@gmail.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/670023/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24drm/msm/dsi/phy_7nm: Fix missing initial VCO rateKrzysztof Kozlowski1-0/+6
[ Upstream commit 5ddcb0cb9d10e6e70a68e0cb8f0b8e3a7eb8ccaf ] Driver unconditionally saves current state on first init in dsi_pll_7nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_7nm_pll_restore_state(). Restoring calls dsi_pll_7nm_vco_set_rate() with pll_7nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/657827/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24drm/msm/dsi/phy: Toggle back buffer resync after preparing PLLKrzysztof Kozlowski1-0/+4
[ Upstream commit b63f008f395ca5f6bc89123db97440bdc19981c4 ] According to Hardware Programming Guide for DSI PHY, the retime buffer resync should be done after PLL clock users (byte_clk and intf_byte_clk) are enabled. Downstream also does it as part of configuring the PLL. Driver was only turning off the resync FIFO buffer, but never bringing it on again. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/657823/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-6-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24drm/msm/a6xx: Fix GMU firmware parserAkhil P Oommen1-1/+4
[ Upstream commit b4789aac9d3441d9f830f0a4022d8dc122d6cab3 ] Current parser logic for GMU firmware assumes a dword aligned payload size for every block. This is not true for all GMU firmwares. So, fix this by using correct 'size' value in the calculation for the offset for the next block's header. Fixes: c6ed04f856a4 ("drm/msm/a6xx: A640/A650 GMU firmware path") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/674040/ Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-23drm/msm/a6xx: Fix PDC sleep sequenceAkhil P Oommen2-14/+26
[ Upstream commit f248d5d5159a88ded55329f0b1b463d0f4094228 ] Since the PDC resides out of the GPU subsystem and cannot be reset in case it enters bad state, utmost care must be taken to trigger the PDC wake/sleep routines in the correct order. The PDC wake sequence can be exercised only after a PDC sleep sequence. Additionally, GMU firmware should initialize a few registers before the KMD can trigger a PDC sleep sequence. So PDC sleep can't be done if the GMU firmware has not initialized. Track these dependencies using a new status variable and trigger PDC sleep/wake sequences appropriately. Cc: stable@vger.kernel.org Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/673362/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> [ omitted A7XX GPU logic and newer struct fields ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-23drm/msm/adreno: De-spaghettify the use of memory barriersKonrad Dybcio2-7/+7
[ Upstream commit 43ec1a202cfa9f765412d325b93873284e7c3d82 ] Memory barriers help ensure instruction ordering, NOT time and order of actual write arrival at other observers (e.g. memory-mapped IP). On architectures employing weak memory ordering, the latter can be a giant pain point, and it has been as part of this driver. Moreover, the gpu_/gmu_ accessors already use non-relaxed versions of readl/writel, which include r/w (respectively) barriers. Replace the barriers with a readback (or drop altogether where possible) that ensures the previous writes have exited the write buffer (as the CPU must flush the write to the register it's trying to read back). Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/600869/ Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Stable-dep-of: f248d5d5159a ("drm/msm/a6xx: Fix PDC sleep sequence") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-15drm/msm/dpu: fix incorrect type for retQianfeng Rong1-1/+1
[ Upstream commit 88ec0e01a880e3326794e149efae39e3aa4dbbec ] Change 'ret' from unsigned long to int, as storing negative error codes in an unsigned long makes it never equal to -ETIMEDOUT, causing logical errors. Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/671100/ Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-04drm/msm: Defer fd_install in SUBMIT ioctlRob Clark1-7/+7
[ Upstream commit f22853435bbd1e9836d0dce7fd99c040b94c2bf1 ] Avoid fd_install() until there are no more potential error paths, to avoid put_unused_fd() after the fd is made visible to userspace. Fixes: 68dc6c2d5eec ("drm/msm: Fix submit error-path leaks") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/665363/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28drm/msm: use trylock for debugfsRob Clark2-1/+8
[ Upstream commit 0a1ff88ec5b60b41ba830c5bf08b6cd8f45ab411 ] This resolves a potential deadlock vs msm_gem_vm_close(). Otherwise for _NO_SHARE buffers msm_gem_describe() could be trying to acquire the shared vm resv, while already holding priv->obj_lock. But _vm_close() might drop the last reference to a GEM obj while already holding the vm resv, and msm_gem_free_object() needs to grab priv->obj_lock, a locking inversion. OTOH this is only for debugfs and it isn't critical if we undercount by skipping a locked obj. So just use trylock() and move along if we can't get the lock. Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Tested-by: Antonino Maniscalco <antomani103@gmail.com> Reviewed-by: Antonino Maniscalco <antomani103@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/661525/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15drm/msm/dpu: Fill in min_prefill_lines for SC8180XKonrad Dybcio1-0/+1
[ Upstream commit 5136acc40afc0261802e5cb01b04f871bf6d876b ] Based on the downstream release, predictably same value as for SM8150. Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Fixes: f3af2d6ee9ab ("drm/msm/dpu: Add SC8180x to hw catalog") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657794/ Link: https://lore.kernel.org/r/20250610-topic-dpu_8180_mpl-v1-1-f480cd22f11c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10drm/msm: Fix another leak in the submit error pathRob Clark1-2/+6
[ Upstream commit f681c2aa8676a890eacc84044717ab0fd26e058f ] put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10drm/msm: Fix a fence leak in submit error pathRob Clark1-0/+9
[ Upstream commit 5d319f75ccf7f0927425a7545aa1a22b3eedc189 ] In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06drm/msm/gpu: Fix crash when throttling GPU immediately during bootStephan Gerhold1-0/+1
commit b71717735be48d7743a34897e9e44a0b53e30c0e upstream. There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Cc: stable@vger.kernel.org Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/650772/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rateKrzysztof Kozlowski1-0/+7
[ Upstream commit 8a48e35becb214743214f5504e726c3ec131cd6d ] Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27drm/msm/disp: Correct porch timing for SDM845James A. MacInnes1-5/+9
[ Upstream commit 146e87f3e11de0dfa091ff87e34b4bc6eec761a4 ] Type-C DisplayPort inoperable due to incorrect porch settings. - Re-used wide_bus_en as flag to prevent porch shifting Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/636945/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25drm/msm/a6xx: Fix stale rpmh votes from GPUAkhil P Oommen1-33/+39
commit f561db72a663f8a73c2250bf3244ce1ce221bed7 upstream. It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC BCM nodes were not removed after GPU suspend. This was because we skipped sending 'prepare-slumber' request to gmu during suspend sequence in some cases. So, make sure we always call prepare-slumber hfi during suspend. Also, calling prepare-slumber without a prior oob-gpu handshake messes up gmu firmware's internal state. So, do that when required. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/639569/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10drm/msm/dsi: Set PHY usescase (and mode) before registering DSI hostMarijn Suijten1-11/+21
[ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ] Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10drm/msm/dsi: Use existing per-interface slice count in DSC timingMarijn Suijten2-15/+4
[ Upstream commit 14ad809ceb66d0874cbe4bd5ca9edf0de8d9ad96 ] When configuring the timing of DSI hosts (interfaces) in dsi_timing_setup() all values written to registers are taking bonded-mode into account by dividing the original mode width by 2 (half the data is sent over each of the two DSI hosts), but the full width instead of the interface width is passed as hdisplay parameter to dsi_update_dsc_timing(). Currently only msm_dsc_get_slices_per_intf() is called within dsi_update_dsc_timing() with the `hdisplay` argument which clearly documents that it wants the width of a single interface (which, again, in bonded DSI mode is half the total width of the mode) resulting in all subsequent values to be completely off. However, as soon as we start to pass the halved hdisplay into dsi_update_dsc_timing() we might as well discard msm_dsc_get_slices_per_intf() since the value it calculates is already available in dsc->slice_count which is per-interface by the current design of MSM DPU/DSI implementations and their use of the DRM DSC helpers. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637648/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10drm/msm/dpu: don't use active in atomic_check()Dmitry Baryshkov2-6/+1
[ Upstream commit 25b4614843bcc56ba150f7c99905125a019e656c ] The driver isn't supposed to consult crtc_state->active/active_check for resource allocation. Instead all resources should be allocated if crtc_state->enabled is set. Stop consulting active / active_changed in order to determine whether the hardware resources should be (re)allocated. Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset") Reported-by: Simona Vetter <simona.vetter@ffwll.ch> Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/ Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/633393/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-1-bbfd3a6cd1a4@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27drm/msm/dpu: Disable dither in phys encoder cleanupJessica Zhang1-0/+3
commit f063ac6b55df03ed25996bdc84d9e1c50147cfa1 upstream. Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-27drm/msm: Avoid rounding up to one jiffyRob Clark1-7/+4
[ Upstream commit 669c285620231786fffe9d87ab432e08a6ed922b ] If userspace is trying to achieve a timeout of zero, let 'em have it. Only round up if the timeout is greater than zero. Fixes: 4969bccd5f4e ("drm/msm: Avoid rounding down to zero jiffies") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632264/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()Dan Carpenter1-2/+1
[ Upstream commit 3a47f4b439beb98e955d501c609dfd12b7836d61 ] The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32 values that come from the user via the submit_lookup_cmds() function. This addition could lead to an integer wrapping bug so use size_add() to prevent that. Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/624696/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27drm/msm/gem: Demote userspace errors to DRM_UT_DRIVERRob Clark2-18/+24
[ Upstream commit b2acb89af1a400be721bcb14f137aa22b509caba ] Error messages resulting from incorrect usage of the kernel uabi should not spam dmesg by default. But it is useful to enable them to debug userspace. So demote to DRM_UT_DRIVER. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/564189/ Stable-dep-of: 3a47f4b439be ("drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm: Check return value of of_dma_configure()Sui Jingfeng1-2/+6
[ Upstream commit b34a7401ffaee45354e81b38a4d072794079cfd6 ] Because the of_dma_configure() will returns '-EPROBE_DEFER' if the probe procedure of the specific platform IOMMU driver is not finished yet. It can also return other error code for various reasons. Stop pretending that it will always suceess, quit if it fail. Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Fixes: 29ac8979cdf7 ("drm/msm/a6xx: use msm_gem for GMU memory objects") Fixes: 5a903a44a984 ("drm/msm/a6xx: Introduce GMU wrapper support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/622782/ Link: https://lore.kernel.org/r/20241104090738.529848-1-sui.jingfeng@linux.dev Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm/dpu: link DSPP_2/_3 blocks on SM8550Dmitry Baryshkov1-0/+2
[ Upstream commit e21f9d85b05361bc343b11ecf84ac12c9cccbc3e ] Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629961/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-6-38fa961ea992@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm/dpu: link DSPP_2/_3 blocks on SM8350Dmitry Baryshkov1-0/+2
[ Upstream commit 42323d3c9e04c725d27606c31663b80a7cc30218 ] Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629959/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-5-38fa961ea992@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm/dpu: link DSPP_2/_3 blocks on SM8250Dmitry Baryshkov1-0/+2
[ Upstream commit 8252028092f86d413b3a83e5e76a9615073a0c7f ] Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: 05ae91d960fd ("drm/msm/dpu: enable DSPP support on SM8[12]50") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629956/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-4-38fa961ea992@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm/dpu: link DSPP_2/_3 blocks on SC8180XDmitry Baryshkov1-0/+2
[ Upstream commit 0986163245df6bece47113e506143a7e87b0097d ] Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: f5abecfe339e ("drm/msm/dpu: enable DSPP and DSC on sc8180x") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629954/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-3-38fa961ea992@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm/dpu: link DSPP_2/_3 blocks on SM8150Dmitry Baryshkov1-0/+2
[ Upstream commit ac440a31e523805939215b24d2f0c451b48d5891 ] Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: 05ae91d960fd ("drm/msm/dpu: enable DSPP support on SM8[12]50") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629952/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-2-38fa961ea992@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08drm/msm/dp: set safe_to_exit_level before printing itDmitry Baryshkov1-1/+1
[ Upstream commit 7dee35d79bb046bfd425aa9e58a82414f67c1cec ] Rather than printing random garbage from stack and pretending that it is the default safe_to_exit_level, set the variable beforehand. Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626804/ Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm/msm/dpu: cast crtc_clk calculation to u64 in _dpu_core_perf_calc_clk()Zichen Xie1-1/+1
[ Upstream commit 20c7b42d9dbd048019bfe0af39229e3014007a98 ] There may be a potential integer overflow issue in _dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as a smaller data type. The result of the calculation will be limited to "int" in this case without correct casting. In screen with high resolution and high refresh rate, integer overflow may happen. So, we recommend adding an extra cast to prevent potential integer overflow. Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/622206/ Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm/msm/gpu: Check the status of registration to PM QoSLukasz Luba1-2/+7
[ Upstream commit 8f32ddd87e499ba6d2dc74ce30b6932baf1e1fc3 ] There is a need to check the returned value of the registration function. In case of returned error, print that and stop the init process. Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Patchwork: https://patchwork.freedesktop.org/patch/620336/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm/msm/adreno: Use IRQF_NO_AUTOEN flag in request_irq()Jinjie Ruan1-3/+1
[ Upstream commit 394679f322649d06fea3c646ba65f5a0887f52c3 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Patchwork: https://patchwork.freedesktop.org/patch/614075/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm/msm/dpu: drop LM_3 / LM_4 on MSM8998Dmitry Baryshkov1-12/+0
[ Upstream commit c59afe50773d5c972f6684f9bbd9a2ddb2fb92fa ] On the MSM8998 platform ther are no LM_3 and LM_4 blocks. Drop them from the MSM8998 catalog. Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog") Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612585/ Link: https://lore.kernel.org/r/20240905-dpu-fix-sdm845-catalog-v1-3-3363d03998bd@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm/msm/dpu: drop LM_3 / LM_4 on SDM845Dmitry Baryshkov1-12/+0
[ Upstream commit d39271061d67c6fcbe8f361c532b493069232cf8 ] On the SDM845 platform ther are no LM_3 and LM_4 blocks. Drop them from the SDM845 catalog. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612586/ Link: https://lore.kernel.org/r/20240905-dpu-fix-sdm845-catalog-v1-2-3363d03998bd@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm/msm/dpu: on SDM845 move DSPP_3 to LM_5 blockDmitry Baryshkov1-1/+1
[ Upstream commit 768a272d5357269b17b4b06dd8647e21bdc0ca3c ] On the SDM845 platform the DSPP_3 is used by the LM_5. Correct corresponding entries in the sdm845_lm array. Fixes: c72375172194 ("drm/msm/dpu/catalog: define DSPP blocks found on sdm845") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612584/ Link: https://lore.kernel.org/r/20240905-dpu-fix-sdm845-catalog-v1-1-3363d03998bd@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dpu: don't always program merge_3d blockJessica Zhang1-1/+1
[ Upstream commit f87f3b80abaf7949e638dd17dfdc267066eb52d5 ] Only program the merge_3d block for the video phys encoder when the 3d blend mode is not NONE Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619095/ Link: https://lore.kernel.org/r/20241009-merge3d-fix-v1-1-0d0b6f5c244e@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm: Allocate memory for disp snapshot with kvzalloc()Douglas Anderson1-2/+2
[ Upstream commit e4a45582db1b792c57bdb52c45958264f7fcfbdc ] With the "drm/msm: add a display mmu fault handler" series [1] we saw issues in the field where memory allocation was failing when allocating space for registers in msm_disp_state_dump_regs(). Specifically we were seeing an order 5 allocation fail. It's not surprising that order 5 allocations will sometimes fail after the system has been up and running for a while. There's no need here for contiguous memory. Change the allocation to kvzalloc() which should make it much less likely to fail. [1] https://lore.kernel.org/r/20240628214848.4075651-1-quic_abhinavk@quicinc.com/ Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619658/ Link: https://lore.kernel.org/r/20241014093605.2.I72441365ffe91f3dceb17db0a8ec976af8139590@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()Douglas Anderson1-7/+8
[ Upstream commit 293f53263266bc4340d777268ab4328a97f041fa ] If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619657/ Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculationJonathan Marek1-1/+1
[ Upstream commit 358b762400bd94db2a14a72dfcef74c7da6bd845 ] When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect. Fix this by making the result of the multiplication unsigned. Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618434/ Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dsi: improve/fix dsc pclk calculationJonathan Marek1-1/+1
[ Upstream commit 24436a540d16ca6a523b8e5441180001c31b6b35 ] drm_mode_vrefresh() can introduce a large rounding error, avoid it. Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618432/ Link: https://lore.kernel.org/r/20241007050157.26855-1-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dpu: check for overflow in _dpu_crtc_setup_lm_bounds()Dmitry Baryshkov1-4/+13
[ Upstream commit 3a0851b442d1f63ba42ecfa2506d3176cfabf9d4 ] Make _dpu_crtc_setup_lm_bounds() check that CRTC width is not overflowing LM requirements. Rename the function accordingly. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/612237/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-3-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dpu: make sure phys resources are properly initializedDmitry Baryshkov1-5/+4
[ Upstream commit bfecbc2cfba9b06d67d9d249c33d92e570e2fa70 ] The commit b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") removed zero-init of the hw_ctl array, but didn't change the error condition, that checked for hw_ctl[i] being NULL. At the same time because of the early returns in case of an error dpu_encoder_phys might be left with the resources assigned in the previous state. Rework assigning of hw_pp / hw_ctl to the dpu_encoder_phys in order to make sure they are always set correctly. Fixes: b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612233/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-1-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrsKonrad Dybcio2-1/+1
[ Upstream commit 16007768551d5bfe53426645401435ca8d2ef54f ] There are some cases, such as the one uncovered by Commit 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") where msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); is called on gpu->pdev == NULL, as the GPU device has not been fully initialized yet. Turns out that there's more than just the aforementioned path that causes this to happen (e.g. the case when there's speedbin data in the catalog, but opp-supported-hw is missing in DT). Assigning msm_gpu->pdev earlier seems like the least painful solution to this, therefore do so. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/602742/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04drm/msm: fix %s null argument errorSherry Yang1-1/+1
[ Upstream commit 25b85075150fe8adddb096db8a4b950353045ee1 ] The following build error was triggered because of NULL string argument: BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump': BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n", BUILDSTDERR: | ^~ BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] This happens from the commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem"). Using "(null)" instead to fix it. Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status") Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/611071/ Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04drm/msm/dsi: correct programming sequence for SM8350 / SM8450Dmitry Baryshkov1-1/+11
[ Upstream commit 1328cb7c34bf6d056df9ff694ee5194537548258 ] According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have different boundaries for pll_clock_inverters programming. Follow the vendor code and use correct values. Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/606947/ Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04drm/msm/a5xx: workaround early ring-buffer emptiness checkVladimir Lypak3-0/+9
[ Upstream commit a30f9f65b5ac82d4390548c32ed9c7f05de7ddf5 ] There is another cause for soft lock-up of GPU in empty ring-buffer: race between GPU executing last commands and CPU checking ring for emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS event and RPTR shadow (which is used to check ring emptiness) is updated a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its last commands slow enough or we check that ring too fast we will miss a chance to trigger switch to lower priority ring because current ring isn't empty just yet. This can escalate to lock-up situation described in previous patch. To work-around this issue we keep track of last submit sequence number for each ring and compare it with one written to memptrs from GPU during execution of CACHE_FLUSH_TS event. Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/612047/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-21 20:12:23 +0300