summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
11 daysdrm/msm/a6xx: Fix out of bound IO access in a6xx_get_gmu_registersAkhil P Oommen1-1/+1
commit 779b68a5bf2764c8ed3aa800e41ba0d5d007e1e7 upstream. REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register range. So, use gmu_write() routines to write to this register. Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/688993/ Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07drm/msm: make sure to not queue up recovery more than onceAntonino Maniscalco1-0/+3
[ Upstream commit 10fb1b2fcaee5545a5e54db1ed4d7b15c2db50c8 ] If two fault IRQs arrive in short succession recovery work will be queued up twice. When recovery runs a second time it may end up killing an unrelated context. Prevent this by masking off interrupts when triggering recovery. Signed-off-by: Antonino Maniscalco <antomani103@gmail.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/670023/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07drm/msm/dsi/phy_7nm: Fix missing initial VCO rateKrzysztof Kozlowski1-0/+6
[ Upstream commit 5ddcb0cb9d10e6e70a68e0cb8f0b8e3a7eb8ccaf ] Driver unconditionally saves current state on first init in dsi_pll_7nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_7nm_pll_restore_state(). Restoring calls dsi_pll_7nm_vco_set_rate() with pll_7nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/657827/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07drm/msm/dsi/phy: Toggle back buffer resync after preparing PLLKrzysztof Kozlowski1-0/+4
[ Upstream commit b63f008f395ca5f6bc89123db97440bdc19981c4 ] According to Hardware Programming Guide for DSI PHY, the retime buffer resync should be done after PLL clock users (byte_clk and intf_byte_clk) are enabled. Downstream also does it as part of configuring the PLL. Driver was only turning off the resync FIFO buffer, but never bringing it on again. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/657823/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-6-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07drm/msm/a6xx: Fix GMU firmware parserAkhil P Oommen1-1/+4
[ Upstream commit b4789aac9d3441d9f830f0a4022d8dc122d6cab3 ] Current parser logic for GMU firmware assumes a dword aligned payload size for every block. This is not true for all GMU firmwares. So, fix this by using correct 'size' value in the calculation for the offset for the next block's header. Fixes: c6ed04f856a4 ("drm/msm/a6xx: A640/A650 GMU firmware path") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/674040/ Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15drm/msm/dpu: fix incorrect type for retQianfeng Rong1-1/+1
[ Upstream commit 88ec0e01a880e3326794e149efae39e3aa4dbbec ] Change 'ret' from unsigned long to int, as storing negative error codes in an unsigned long makes it never equal to -ETIMEDOUT, causing logical errors. Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/671100/ Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-02minmax: add in_range() macroMatthew Wilcox (Oracle)1-6/+0
[ Upstream commit f9bff0e31881d03badf191d3b0005839391f5f2b ] Patch series "New page table range API", v6. This patchset changes the API used by the MM to set up page table entries. The four APIs are: set_ptes(mm, addr, ptep, pte, nr) update_mmu_cache_range(vma, addr, ptep, nr) flush_dcache_folio(folio) flush_icache_pages(vma, page, nr) flush_dcache_folio() isn't technically new, but no architecture implemented it, so I've done that for them. The old APIs remain around but are mostly implemented by calling the new interfaces. The new APIs are based around setting up N page table entries at once. The N entries belong to the same PMD, the same folio and the same VMA, so ptep++ is a legitimate operation, and locking is taken care of for you. Some architectures can do a better job of it than just a loop, but I have hesitated to make too deep a change to architectures I don't understand well. One thing I have changed in every architecture is that PG_arch_1 is now a per-folio bit instead of a per-page bit when used for dcache clean/dirty tracking. This was something that would have to happen eventually, and it makes sense to do it now rather than iterate over every page involved in a cache flush and figure out if it needs to happen. The point of all this is better performance, and Fengwei Yin has measured improvement on x86. I suspect you'll see improvement on your architecture too. Try the new will-it-scale test mentioned here: https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/ You'll need to run it on an XFS filesystem and have CONFIG_TRANSPARENT_HUGEPAGE set. This patchset is the basis for much of the anonymous large folio work being done by Ryan, so it's received quite a lot of testing over the last few months. This patch (of 38): Determine if a value lies within a range more efficiently (subtraction + comparison vs two comparisons and an AND). It also has useful (under some circumstances) behaviour if the range exceeds the maximum value of the type. Convert all the conflicting definitions of in_range() within the kernel; some can use the generic definition while others need their own definition. Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04drm/msm: Defer fd_install in SUBMIT ioctlRob Clark1-7/+7
[ Upstream commit f22853435bbd1e9836d0dce7fd99c040b94c2bf1 ] Avoid fd_install() until there are no more potential error paths, to avoid put_unused_fd() after the fd is made visible to userspace. Fixes: 68dc6c2d5eec ("drm/msm: Fix submit error-path leaks") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/665363/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28drm/msm: use trylock for debugfsRob Clark2-1/+8
[ Upstream commit 0a1ff88ec5b60b41ba830c5bf08b6cd8f45ab411 ] This resolves a potential deadlock vs msm_gem_vm_close(). Otherwise for _NO_SHARE buffers msm_gem_describe() could be trying to acquire the shared vm resv, while already holding priv->obj_lock. But _vm_close() might drop the last reference to a GEM obj while already holding the vm resv, and msm_gem_free_object() needs to grab priv->obj_lock, a locking inversion. OTOH this is only for debugfs and it isn't critical if we undercount by skipping a locked obj. So just use trylock() and move along if we can't get the lock. Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Tested-by: Antonino Maniscalco <antomani103@gmail.com> Reviewed-by: Antonino Maniscalco <antomani103@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/661525/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10drm/msm: Fix another leak in the submit error pathRob Clark1-2/+6
[ Upstream commit f681c2aa8676a890eacc84044717ab0fd26e058f ] put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10drm/msm: Fix a fence leak in submit error pathRob Clark1-0/+9
[ Upstream commit 5d319f75ccf7f0927425a7545aa1a22b3eedc189 ] In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06drm/msm/gpu: Fix crash when throttling GPU immediately during bootStephan Gerhold1-0/+1
commit b71717735be48d7743a34897e9e44a0b53e30c0e upstream. There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Cc: stable@vger.kernel.org Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/650772/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rateKrzysztof Kozlowski1-0/+7
[ Upstream commit 8a48e35becb214743214f5504e726c3ec131cd6d ] Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27drm/msm/disp: Correct porch timing for SDM845James A. MacInnes1-5/+9
[ Upstream commit 146e87f3e11de0dfa091ff87e34b4bc6eec761a4 ] Type-C DisplayPort inoperable due to incorrect porch settings. - Re-used wide_bus_en as flag to prevent porch shifting Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/636945/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25drm/msm/a6xx: Fix stale rpmh votes from GPUAkhil P Oommen1-33/+39
commit f561db72a663f8a73c2250bf3244ce1ce221bed7 upstream. It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC BCM nodes were not removed after GPU suspend. This was because we skipped sending 'prepare-slumber' request to gmu during suspend sequence in some cases. So, make sure we always call prepare-slumber hfi during suspend. Also, calling prepare-slumber without a prior oob-gpu handshake messes up gmu firmware's internal state. So, do that when required. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/639569/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10drm/msm/dsi: Set PHY usescase (and mode) before registering DSI hostMarijn Suijten1-11/+21
[ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ] Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07drm/msm/dpu: Disable dither in phys encoder cleanupJessica Zhang1-0/+3
commit f063ac6b55df03ed25996bdc84d9e1c50147cfa1 upstream. Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fieldsMarijn Suijten1-1/+2
[ Upstream commit 144429831f447223253a0e4376489f84ff37d1a7 ] What used to be the input_10_bits boolean - feeding into the lowest bit of DSC_ENC - on MSM downstream turned into an accidental OR with the full bits_per_component number when it was ported to the upstream kernel. On typical bpc=8 setups we don't notice this because line_buf_depth is always an odd value (it contains bpc+1) and will also set the 4th bit after left-shifting by 3 (hence this |= bits_per_component is a no-op). Now that guards are being removed to allow more bits_per_component values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with the 5th bit which is convert_rgb. This is "fortunately" also always set to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12 starts being used it'll write into simple_422 which is normally false. To solve all these overlaps, simply replicate downstream code and only set this lowest bit if bits_per_component is equal to 10. It is unclear why DSC requires this only for bpc=10 but not bpc=12, and also notice that this lowest bit wasn't set previously despite having a panel and patch on the list using it without any mentioned issues. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636311/ Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/msm/dp: set safe_to_exit_level before printing itDmitry Baryshkov1-1/+1
[ Upstream commit 7dee35d79bb046bfd425aa9e58a82414f67c1cec ] Rather than printing random garbage from stack and pretending that it is the default safe_to_exit_level, set the variable beforehand. Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626804/ Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer neededRandy Dunlap1-1/+0
commit a722511b18268bd1f7084eee243af416b85f288f upstream. DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled") in linux-next), so remove that select from the DRM_MSM Kconfig file. Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/523353/ Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org [rob: tweak commit message to make checkpatch.pl happy] Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14drm/msm/dpu: cast crtc_clk calculation to u64 in _dpu_core_perf_calc_clk()Zichen Xie1-1/+1
[ Upstream commit 20c7b42d9dbd048019bfe0af39229e3014007a98 ] There may be a potential integer overflow issue in _dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as a smaller data type. The result of the calculation will be limited to "int" in this case without correct casting. In screen with high resolution and high refresh rate, integer overflow may happen. So, we recommend adding an extra cast to prevent potential integer overflow. Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/622206/ Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14drm/msm/gpu: Check the status of registration to PM QoSLukasz Luba1-2/+7
[ Upstream commit 8f32ddd87e499ba6d2dc74ce30b6932baf1e1fc3 ] There is a need to check the returned value of the registration function. In case of returned error, print that and stop the init process. Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Patchwork: https://patchwork.freedesktop.org/patch/620336/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14drm/msm/gpu: Bypass PM QoS constraint for idle clampRob Clark2-82/+65
[ Upstream commit fadcc3ab1302d4e5baa32c272b658221f0066696 ] Change idle freq clamping back to the direct method, bypassing PM QoS requests. The problem with using PM QoS requests is they call (indirectly) the governors ->get_target_freq() which goes thru a get_dev_status() cycle. The problem comes when the GPU becomes active again and we remove the idle-clamp request, we go through another get_dev_status() cycle for the period that the GPU has been idle, which triggers the governor to lower the target freq excessively. This partially reverts commit 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints"), but preserves the use of boost QoS request, so that it will continue to play nicely with other QoS requests such as a cooling device. This also mostly undoes commit 78f815c1cf8f ("drm/msm: return the average load over the polling period") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/517785/ Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14drm/msm/gpu: Add devfreq tuning debugfsRob Clark6-6/+27
[ Upstream commit 6563f60f14cbb3dcbdc4e1d8469fc0fbaaa80544 ] Make the handful of tuning knobs available visible via debugfs. v2: select DEVFREQ_GOV_SIMPLE_ONDEMAND because for some reason struct devfreq_simple_ondemand_data depends on this Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/517784/ Link: https://lore.kernel.org/r/20230110231447.1939101-2-robdclark@gmail.com Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14drm/msm/adreno: Use IRQF_NO_AUTOEN flag in request_irq()Jinjie Ruan1-3/+1
[ Upstream commit 394679f322649d06fea3c646ba65f5a0887f52c3 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Patchwork: https://patchwork.freedesktop.org/patch/614075/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dpu: don't always program merge_3d blockJessica Zhang1-1/+1
[ Upstream commit f87f3b80abaf7949e638dd17dfdc267066eb52d5 ] Only program the merge_3d block for the video phys encoder when the 3d blend mode is not NONE Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619095/ Link: https://lore.kernel.org/r/20241009-merge3d-fix-v1-1-0d0b6f5c244e@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dpu: Wire up DSC mask for active CTL configurationMarijn Suijten2-0/+2
[ Upstream commit cda3774c242e156cdcc279bd36b404af89f744c6 ] Active CTLs have to configure what DSC block(s) have to be enabled, and what DSC block(s) have to be flushed; this value was initialized to zero resulting in the necessary register writes to never happen (or would write zero otherwise). This seems to have gotten lost in the DSC v4->v5 series while refactoring how the combination with merge_3d was handled. Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/515693/ Link: https://lore.kernel.org/r/20221221231943.1961117-2-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Stable-dep-of: f87f3b80abaf ("drm/msm/dpu: don't always program merge_3d block") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm: Allocate memory for disp snapshot with kvzalloc()Douglas Anderson1-2/+2
[ Upstream commit e4a45582db1b792c57bdb52c45958264f7fcfbdc ] With the "drm/msm: add a display mmu fault handler" series [1] we saw issues in the field where memory allocation was failing when allocating space for registers in msm_disp_state_dump_regs(). Specifically we were seeing an order 5 allocation fail. It's not surprising that order 5 allocations will sometimes fail after the system has been up and running for a while. There's no need here for contiguous memory. Change the allocation to kvzalloc() which should make it much less likely to fail. [1] https://lore.kernel.org/r/20240628214848.4075651-1-quic_abhinavk@quicinc.com/ Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619658/ Link: https://lore.kernel.org/r/20241014093605.2.I72441365ffe91f3dceb17db0a8ec976af8139590@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()Douglas Anderson1-7/+8
[ Upstream commit 293f53263266bc4340d777268ab4328a97f041fa ] If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619657/ Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculationJonathan Marek1-1/+1
[ Upstream commit 358b762400bd94db2a14a72dfcef74c7da6bd845 ] When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect. Fix this by making the result of the multiplication unsigned. Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618434/ Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01drm/msm/dpu: make sure phys resources are properly initializedDmitry Baryshkov1-5/+4
[ Upstream commit bfecbc2cfba9b06d67d9d249c33d92e570e2fa70 ] The commit b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") removed zero-init of the hw_ctl array, but didn't change the error condition, that checked for hw_ctl[i] being NULL. At the same time because of the early returns in case of an error dpu_encoder_phys might be left with the resources assigned in the previous state. Rework assigning of hw_pp / hw_ctl to the dpu_encoder_phys in order to make sure they are always set correctly. Fixes: b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612233/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-1-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17drm/msm: fix %s null argument errorSherry Yang1-1/+1
[ Upstream commit 25b85075150fe8adddb096db8a4b950353045ee1 ] The following build error was triggered because of NULL string argument: BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump': BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n", BUILDSTDERR: | ^~ BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] This happens from the commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem"). Using "(null)" instead to fix it. Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status") Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/611071/ Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17drm/msm/a5xx: workaround early ring-buffer emptiness checkVladimir Lypak3-0/+9
[ Upstream commit a30f9f65b5ac82d4390548c32ed9c7f05de7ddf5 ] There is another cause for soft lock-up of GPU in empty ring-buffer: race between GPU executing last commands and CPU checking ring for emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS event and RPTR shadow (which is used to check ring emptiness) is updated a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its last commands slow enough or we check that ring too fast we will miss a chance to trigger switch to lower priority ring because current ring isn't empty just yet. This can escalate to lock-up situation described in previous patch. To work-around this issue we keep track of last submit sequence number for each ring and compare it with one written to memptrs from GPU during execution of CACHE_FLUSH_TS event. Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/612047/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17drm/msm/a5xx: fix races in preemption evaluation stageVladimir Lypak2-2/+23
[ Upstream commit ce050f307ad93bcc5958d0dd35fc276fd394d274 ] On A5XX GPUs when preemption is used it's invietable to enter a soft lock-up state in which GPU is stuck at empty ring-buffer doing nothing. This appears as full UI lockup and not detected as GPU hang (because it's not). This happens due to not triggering preemption when it was needed. Sometimes this state can be recovered by some new submit but generally it won't happen because applications are waiting for old submits to retire. One of the reasons why this happens is a race between a5xx_submit and a5xx_preempt_trigger called from IRQ during submit retire. Former thread updates ring->cur of previously empty and not current ring right after latter checks it for emptiness. Then both threads can just exit because for first one preempt_state wasn't NONE yet and for second one all rings appeared to be empty. To prevent such situations from happening we need to establish guarantee for preempt_trigger to make decision after each submit or retire. To implement this we serialize preemption initiation using spinlock. If switch is already in progress we need to re-trigger preemption when it finishes. Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/612045/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17drm/msm/a5xx: properly clear preemption records on resumeVladimir Lypak1-0/+2
[ Upstream commit 64fd6d01a52904bdbda0ce810a45a428c995a4ca ] Two fields of preempt_record which are used by CP aren't reset on resume: "data" and "info". This is the reason behind faults which happen when we try to switch to the ring that was active last before suspend. In addition those faults can't be recovered from because we use suspend and resume to do so (keeping values of those fields again). Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/612043/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17drm/msm/a5xx: disable preemption in submits by defaultVladimir Lypak1-2/+6
[ Upstream commit db9dec2db76146d65e1cfbb6afb2e2bd5dab67f8 ] Fine grain preemption (switching from/to points within submits) requires extra handling in command stream of those submits, especially when rendering with tiling (using GMEM). However this handling is missing at this point in mesa (and always was). For this reason we get random GPU faults and hangs if more than one priority level is used because local preemption is enabled prior to executing command stream from submit. With that said it was ahead of time to enable local preemption by default considering the fact that even on downstream kernel it is only enabled if requested via UAPI. Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register") Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/612041/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17drm/msm: Fix incorrect file name output in adreno_request_fw()Aleksandr Mishin1-1/+1
[ Upstream commit e19366911340c2313a1abbb09c54eaf9bdea4f58 ] In adreno_request_fw() when debugging information is printed to the log after firmware load, an incorrect filename is printed. 'newname' is used instead of 'fwname', so prefix "qcom/" is being added to filename. Looks like "copy-paste" mistake. Fix this mistake by replacing 'newname' with 'fwname'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/602382/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18drm/msm/adreno: Fix error return if missing firmware-nameRob Clark1-1/+1
[ Upstream commit 624ab9cde26a9f150b4fd268b0f3dae3184dc40c ] -ENODEV is used to signify that there is no zap shader for the platform, and the CPU can directly take the GPU out of secure mode. We want to use this return code when there is no zap-shader node. But not when there is, but without a firmware-name property. This case we want to treat as-if the needed fw is not found. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/604564/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29drm/msm/dpu: cleanup FB if dpu_format_populate_layout failsDmitry Baryshkov1-0/+3
[ Upstream commit bfa1a6283be390947d3649c482e5167186a37016 ] If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/600714/ Link: https://lore.kernel.org/r/20240625-dpu-mode-config-width-v5-1-501d984d634f@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29drm/msm/dp: reset the link phy params before link trainingAbhinav Kumar1-0/+2
[ Upstream commit 319aca883bfa1b85ee08411541b51b9a934ac858 ] Before re-starting link training reset the link phy params namely the pre-emphasis and voltage swing levels otherwise the next link training begins at the previously cached levels which can result in link training failures. Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/605946/ Link: https://lore.kernel.org/r/20240725220450.131245-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29drm/msm/dp: fix the max supported bpp logicAbhinav Kumar1-9/+10
[ Upstream commit d19d5b8d8f6dab942ce5ddbcf34bf7275e778250 ] Fix the dp_panel_get_supported_bpp() API to return the minimum supported bpp correctly for relevant cases and use this API to correct the behavior of DP driver which hard-codes the max supported bpp to 30. This is incorrect because the number of lanes and max data rate supported by the lanes need to be taken into account. Replace the hardcoded limit with the appropriate math which accounts for the accurate number of lanes and max data rate. changes in v2: - Fix the dp_panel_get_supported_bpp() and use it - Drop the max_t usage as dp_panel_get_supported_bpp() already returns the min_bpp correctly now changes in v3: - replace min_t with just min as all params are u32 Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/43 Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/607073/ Link: https://lore.kernel.org/r/20240805202009.1120981-1-quic_abhinavk@quicinc.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29drm/msm/dpu: don't play tricks with debug macrosDmitry Baryshkov1-12/+2
[ Upstream commit df24373435f5899a2a98b7d377479c8d4376613b ] DPU debugging macros need to be converted to a proper drm_debug_* macros, however this is a going an intrusive patch, not suitable for a fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER to make sure that DPU debugging messages always end up in the drm debug messages and are controlled via the usual drm.debug mask. I don't think that it is a good idea for a generic DPU_DEBUG macro to be tied to DRM_UT_KMS. It is used to report a debug message from driver, so by default it should go to the DRM_UT_DRIVER channel. While refactoring debug macros later on we might end up with particular messages going to ATOMIC or KMS, but DRIVER should be the default. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/606932/ Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29drm/msm: Reduce fallout of fence signaling vs reclaim hangsRob Clark1-1/+1
[ Upstream commit 4bea53b9c7c72fd12a0ceebe88a71723c0a514b8 ] Until various PM devfreq/QoS and interconnect patches land, we could potentially trigger reclaim from gpu scheduler thread, and under enough memory pressure that could trigger a sort of deadlock. Eventually the wait will timeout and we'll move on to consider other GEM objects. But given that there is still a potential for deadlock/stalling, we should reduce the timeout to contain the damage. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/568031/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03drm/msm/dpu: drop validity checks for clear_pending_flush() ctl opAbhinav Kumar3-5/+4
[ Upstream commit 3d68e3dedd4b48f0358bdc187277e3315d8aa559 ] clear_pending_flush() ctl op is always assigned irrespective of the DPU hardware revision. Hence there is no needed to check whether the op has been assigned before calling it. Drop the checks across the driver for clear_pending_flush() and also update its documentation that it is always expected to be assigned. changes in v2: - instead of adding more validity checks just drop the one for clear_pending_flush - update the documentation for clear_pending_flush() ctl op - update the commit text reflecting these changes changes in v3: - simplify the documentation of clear_pending_flush Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/464fbd84-0d1c-43c3-a40b-31656ac06456@moroto.mountain/T/ Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/600241/ Link: https://lore.kernel.org/r/20240620201731.3694593-1-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03drm/msm/dsi: set VIDEO_COMPRESSION_MODE_CTRL_WCJonathan Marek1-0/+3
[ Upstream commit 9ecd0ddd223b68b4603e4766a1d51f6c6cda346e ] Video mode DSC won't work if this field is not set correctly. Set it to fix video mode DSC (for slice_per_pkt==1 cases at least). Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596234/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-5-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting failsKonrad Dybcio1-1/+2
[ Upstream commit 46d4efcccc688cbacdd70a238bedca510acaa8e4 ] Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer dereference on: msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); as gpu->pdev is only assigned in: a6xx_gpu_init() |_ adreno_gpu_init |_ msm_gpu_init() Instead of relying on handwavy null checks down the cleanup chain, explicitly de-allocate the LLC data and free a6xx_gpu instead. Fixes: 76efc2453d0e ("drm/msm/gpu: Fix crash during system suspend after unbind") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/588919/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/msm: Enable clamp_to_idle for 7c3Rob Clark1-7/+7
[ Upstream commit 2c1b7748100e2e40155722589201f24c23ae5d53 ] This was overlooked. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/511693/ Link: https://lore.kernel.org/r/20221115155535.1615278-1-robdclark@gmail.com Stable-dep-of: 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/msm/dpu: Always flush the slave INTF on the CTLMarijn Suijten1-3/+0
[ Upstream commit 2b938c3ab0a69ec6ea587bbf6fc2aec3db4a8736 ] As we can clearly see in a downstream kernel [1], flushing the slave INTF is skipped /only if/ the PPSPLIT topology is active. However, when DPU was originally submitted to mainline PPSPLIT was no longer part of it (seems to have been ripped out before submission), but this clause was incorrectly ported from the original SDE driver. Given that there is no support for PPSPLIT (currently), flushing the slave INTF should /never/ be skipped (as the `if (ppsplit && !master) goto skip;` clause downstream never becomes true). [1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/display-kernel.lnx.5.4.r1-rel/msm/sde/sde_encoder_phys_cmd.c?ref_type=heads#L1131-1139 Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/589901/ Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-3-78ae3ee9a697@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/msm/dsi: Print dual-DSI-adjusted pclk instead of original mode pclkMarijn Suijten1-5/+5
[ Upstream commit f12e0e12524a34bf145f7b80122e653ffe3d130a ] When dual-DSI (bonded DSI) was added in commit ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints were not updated, leading to print the original mode->clock rather than the adjusted (typically the mode clock divided by two, though more recently also adjusted for DSC compression) msm_host->pixel_clk_rate which is passed to clk_set_rate() just below. Fix that by printing the actual pixel_clk_rate that is being set. Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/589896/ Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/msm/dp: Avoid a long timeout for AUX transfer if nothing connectedDouglas Anderson3-0/+25
[ Upstream commit 5d1a7493343cc00d9019880b686e4e0a0f649531 ] As documented in the description of the transfer() function of "struct drm_dp_aux", the transfer() function can be called at any time regardless of the state of the DP port. Specifically if the kernel has the DP AUX character device enabled and userspace accesses "/dev/drm_dp_auxN" directly then the AUX transfer function will be called regardless of whether a DP device is connected. For eDP panels we have a special rule where we wait (with a 5 second timeout) for HPD to go high. This rule was important before all panels drivers were converted to call wait_hpd_asserted() and actually can be removed in a future commit. For external DP devices we never checked for HPD. That means that trying to access the DP AUX character device (AKA `hexdump -C /dev/drm_dp_auxN`) would very, very slowly timeout. Specifically on my system: $ time hexdump -C /dev/drm_dp_aux0 hexdump: /dev/drm_dp_aux0: Connection timed out real 0m8.200s We want access to the drm_dp_auxN character device to fail faster than 8 seconds when no DP cable is plugged in. Let's add a test to make transfers fail right away if a device isn't plugged in. Rather than testing the HPD line directly, we have the dp_display module tell us when AUX transfers should be enabled so we can handle cases where HPD is signaled out of band like with Type C. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/583127/ Link: https://lore.kernel.org/r/20240315143621.v2.1.I16aff881c9fe82b5e0fc06ca312da017aa7b5b3e@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-22 21:50:24 +0300