| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
|
|
Use the new of_get_compatible_child() helper to lookup the legacy
pwrlevels child node instead of using of_find_compatible_node(), which
searches the entire tree from a given start node and thus can return an
unrelated (i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the probed device's node).
While at it, also fix the related child-node reference leak.
Fixes: e2af8b6b0ca1 ("drm/msm: gpu: Use OPP tables if we can")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: a2c3c0a54d4c drm/msm/a6xx: Add devfreq support for a6xx
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
A small fixup I posted with my v2 patch [1] that was dropped.
[1]- https://lists.freedesktop.org/archives/freedreno/2018-October/003647.html
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The CP performance counter selects were accidentally marked as protected
so they couldn't be written from PM4 streams. Remove the protection
because user space does have an interest in setting up their own
counters.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: de0a3d094de0 drm/msm: re-factor devfreq code
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Implement routines to estimate GPU busy time and fetching the
current frequency for the polling interval. This is required by
the devfreq framework which recommends a frequency change if needed.
The driver code then tries to set this new frequency on the GPU by
sending an Out Of Band(OOB) request to the GMU.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The devfreq framework requires the drivers to provide busy time estimations.
The GPU driver relies on the hardware performance counteres for the busy time
estimations, but different hardware revisions have counters which can be
sourced from different clocks. So the busy time estimation will be target
dependent. Additionally on targets where the clocks are completely controlled
by the on chip microcontroller, fetching and setting the current GPU frequency
will be different. This patch aims to embrace these differences by re-factoring
the devfreq code a bit.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add a simple function to read 64 registers in the GMU domain
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The target definition for a630 didn't set a reasonable
value for inactive_period so it defaulted to zero and
we were essentially powering down after every submission.
Set it back to the default value to keep the GPU from
bouncing too much during regular workloads.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The only HFI communication with the GMU on sdm845 happens
during initialization and all commands are synchronous. A fancy
interrupt tasklet and associated infrastructure is entirely
not eeded and puts us at the mercy of the scheduler.
Instead poll for the message signal and handle the response
immediately and go on our way.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The point of the 'force_dma' parameter for of_dma_configure
is to force the device to be set up even if DMA capability is
not described by the firmware which is exactly the use case
we have for GMU - we need SMMU to get set up but we have no
other dma capabilities since memory is managed by the GPU
driver. Currently we pass false so of_dma_configure() fails
and subsequently GMU and GPU probe does as well.
Fixes: 4b565ca5a2c ("drm/msm: Add A6XX device support")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
In the case where preemption is not enabled, this patch simply skips
preemption related initialization in hardware init sequence.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The current design greedily takes a big chunk of the PDC
register space instead of just the GPU specific sections
which conflicts with other drivers and generally makes
a mess of things.
Furthermore we only need to map the GPU PDC sections
just once during init so map the memory inside the function
that uses it and adjust the pointers and register offsets
accordingly.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
>From the review for the DT bindings for the GPU/GMU it
was suggested that the phandle for the GMU be
'qcom,gmu' instead of just 'gmu'.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The index of the perf table was being set in the wrong bit position
in the register. With this fix, the GPU clock can be seen running at
desired frequency.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Trivial fix to spelling mistake in dev_err message and comment
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add support for the A6XX family of Adreno GPUs. The biggest addition
is the GMU (Graphics Management Unit) which takes over most of the
power management of the GPU itself but in a ironic twist of fate
needs a goodly amount of management itself. Add support for the
A6XX core code, the GMU and the HFI (hardware firmware interface)
queue that the CPU uses to communicate with the GMU.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Resync generated headers to pull in a6xx registers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Failure to load firmware is the primary reason to fail adreno_load_gpu().
Try to load it first before going into the hardware initialization code and
unwinding it. This is important for a6xx because the GMU gets loaded from
the runtime power code and it is more costly to fail in that path because
of missing firmware.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a kasprintf()ed buffer. Return paths are updated
to free the allocation.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
All users of do_gettimeofday() have been removed, but this one recently
crept in, along with an incorrect printing of the microseconds portion.
This converts it to using ktime_get_real_timespec64() as a direct
replacement, and adds the leading zeroes. I considered using monotonic
times (ktime_get()) instead, but as this timestamp appears to only
be used for humans rather than compared with other timestamps, the
real time domain is probably good enough.
Fixes: e43b045e2c82 ("drm/msm/gpu: Capture the state of the GPU")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
For hangs, dump copy out the contents of the buffer objects attached to the
guilty submission and print them in the crash dump report.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
HLSQ, SP and TP registers are only accessible from a special
aperture and to make matters worse the aperture is blocked from
the CPU on targets that can support secure rendering. Luckily the
GPU hardware has its own purpose built register dumper that can
access the registers from the aperture. Add a5xx specific code
to program the crashdumper and retrieve the wayward registers
and dump them for the crash state.
Also, remove a block of registers the regular CPU accessible
list that aren't useful for debug which helps reduce the size
of the crash state file by a goodly amount.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add the contents of each ringbuffer to the GPU state and dump the
data in the crash file encoded with ascii85. To save space only
the used portions of the ringbuffer are dumped.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Convert the format of the 'show' debugfs file and the crash
dump to a format resembling YAML. This should be easier to
parse and be more flexible for future changes and expansions.
v2: Use a standard .rst for the msm crashdump documentation
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Capture the GPU state on a GPU hang and store it for later playback
via the devcoredump facility. Only one crash state is stored at a
time on the assumption that the first hang is usually the most
interesting. The existing crash state can be cleared after capturing
it and then a new one will be captured on the next hang.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Convert the existing GPU show function to use the GPU state to
dump the information rather than reading it directly from the hardware.
This will require an additional step to capture the state before
dumping it for the existing nodes but it will greatly facilitate reusing
the same code for dumping a previously captured state from a GPU hang.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add the infrastructure to capture the current state of the GPU and
store it in memory so that it can be dumped later.
For now grab the same basic ringbuffer information and registers
that are provided by the debugfs 'gpu' node but obviously this should
be extended to capture a much larger set of GPU information.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Experimentation shows that resuming power quickly after suspending
ends up forcing a system hang for unknown reasons on 5xx targets.
To avoid cycling the power too much (especially during init)
turn up the autosuspend time for a5xx to 250ms and use
pm_runtime_put_autosuspend() when applicable.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
When a msm8016 based system is woken up from suspend, the firmware in
the adreno device hangs.
[ 83.903416] qcom-iommu-ctx 1f09000.iommu-ctx: Unhandled context fault: fsr=0x202, iova=0x0000000000000000, fsynr=0x2, cb=1
[ 85.853633] msm 1a00000.mdss: A306: hangcheck detected gpu lockup rb 0!
[ 85.853661] msm 1a00000.mdss: A306: completed fence: 370
[ 85.859073] msm 1a00000.mdss: A306: submitted fence: 372
[ 85.865113] msm 1a00000.mdss: A306: hangcheck recover!
Fix this by adding pm_runtime_force_suspend/pm_runtime_force_resume
as sleep ops.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
drm-misc-next is still based on v4.16-rc7, and was getting a bit stale.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
It's going away.
v2: Try harder to find them all.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503093107.25955-1-daniel.vetter@ffwll.ch
|
|
Pull remoteproc updates from Bjorn Andersson:
- add support for generating coredumps for remoteprocs using
devcoredump
- add the Qualcomm sysmon driver for intra-remoteproc crash handling
- a number of fixes in Qualcomm and IMX drivers
* tag 'rproc-v4.17' of git://github.com/andersson/remoteproc:
remoteproc: fix null pointer dereference on glink only platforms
soc: qcom: qmi: add CONFIG_NET dependency
remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'
remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()'
remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
samples: Introduce Qualcomm QMI sample client
remoteproc: qcom: Introduce sysmon
remoteproc: Pass type of shutdown to subdev remove
remoteproc: qcom: Register segments for core dump
soc: qcom: mdt-loader: Return relocation base
remoteproc: Rename "load_rsc_table" to "parse_fw"
remoteproc: Add remote processor coredump support
remoteproc: Remove null character write of shared mem
|
|
The adreno driver stopped building when CONFIG_DEBUGFS is disabled:
drivers/gpu/drm/msm/adreno/adreno_device.c: In function 'adreno_load_gpu':
drivers/gpu/drm/msm/adreno/adreno_device.c:153:16: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
if (gpu->funcs->debugfs_init) {
^~
drivers/gpu/drm/msm/adreno/adreno_device.c:154:13: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
gpu->funcs->debugfs_init(gpu, dev->primary);
^~
This adds an #ifdef around the code that references the hidden
pointer.
Fixes: 331dc0bc195b ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Interrupt commands causes the CP to trigger an interrupt as the command
is processed, regardless of the GPU being done processing previous
commands. This is seen by the interrupt being delivered before the
fence is written on 8974 and is likely the cause of the additional
CP_WAIT_FOR_IDLE workaround found for a306, which would cause the CP to
wait for the GPU to go idle before triggering the interrupt.
Instead we can set the (undocumented) BIT(31) of the CACHE_FLUSH_TS
which will cause a special CACHE_FLUSH_TS interrupt to be triggered from
the GPU as the write event is processed.
Add CACHE_FLUSH_TS to the IRQ masks of A3xx and A4xx and remove the
workaround for A306.
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
_minor_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference. Fix this by moving the pointer
dereference after _minor_ has been null checked.
Fixes: 024ad8df763f ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Move a5xx specific code to load firmware into a buffer object to
the generic Adreno code. This will come in useful for future targets.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The number and type of firmware files required differs for each
target. Instead of using a fixed struct member for each possible
firmware file use a generic list of files that should be loaded
on boot. Use some semi-target specific enums to help each target
find the appropriate firmware(s) that it needs to load.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The power management device on the a5xx cores is known as the
GPMU (Graphics Power Management Unit). On a6xx cores the device
was expanded and renamed as the GMU (Graphics Management Unit).
Rename the 'gpmufw' name struct adreno_info as 'powerfw' to
avoid confusion.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
drm_gem_object_{reference,unreference,unreference_unlocked} are
deprecated functions, and merely alias to the get/put functions.
Switch to the new names.
Signed-off-by: Steve Kowalik <steven@wedontsleep.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This flags cause cmdstream to be executed from the ringbuffer (RB)
instead of IB1. Normally not something you'd ever want to do, but
it is super useful for firmware debugging.
Hidden behind CAP_SYS_RAWIO and a default=n kconfig option which
depends on EXPERT (and has a suitably scary warning), to prevent
it from being used on accident.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add some debugfs to dump out PFP and ME microcontroller state, as well
as some of the queues (MEQ and ROQ). Also add a debugfs file to trigger
a GPU reset (and reloading the firmware on next submit).
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
In order to implement support for grabbing core dumps in remoteproc it's
necessary to know the relocated base of the image, as the offsets from
the virtual memory base might not be based on the physical address.
Return the adjusted physical base address to the caller.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add support for devfreq to dynamically control the GPU frequency.
By default try to use the 'simple_ondemand' governor which can
adjust the frequency based on GPU load.
v2: Fix __aeabi_uldivmod issue from the 0 day bot and use
devfreq_recommended_opp() as suggested by Rob.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Even though the default countable for CP0 is CP_ALWAYS_COUNT (0),
program the selector during HW initialization in an effort to be
up front about which counters are programmed and why.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Some 5xx based chipsets have different bins for GPU clock speeds.
Read the fuses (if applicable) and set the appropriate OPP table.
This will only work with OPP v2 tables - the bin will be ignored
for legacy pwrlevel tables.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Move the clock parsing to adreno_gpu_init() to allow for target
specific probing and manipulation of the clock tables.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
