summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_i2c.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-16Merge tag 'topic/hdcp-2018-02-13' of ↵Dave Airlie1-17/+64
git://anongit.freedesktop.org/drm/drm-misc into drm-next Add HDCP support to i915 drm driver. * tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits) drm/i915: fix misalignment in HDCP register def drm/i915: Reauthenticate HDCP on failure drm/i915: Detect panel's hdcp capability drm/i915: Optimize HDCP key load drm/i915: Retry HDCP bksv read drm/i915: Connector info in HDCP debug msgs drm/i915: Stop encryption for repeater with no sink drm/i915: Handle failure from 2nd stage HDCP auth drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS drm/i915: Restore HDCP DRM_INFO when with no downstream drm/i915: Check for downstream topology errors drm/i915: Start repeater auth on READY/CP_IRQ drm/i915: II stage HDCP auth for repeater only drm/i915: Extending HDCP for HSW, BDW and BXT+ drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link drm/i915: Only disable HDCP when it's active drm/i915: Don't allow HDCP on PORT E/F drm/i915: Implement HDCP for DisplayPort drm/i915: Implement HDCP for HDMI drm/i915: Add function to output Aksv over GMBUS ...
2018-01-19drm/i915/icp: add ICP gmbus and gpio supportAnusha Srivatsa1-2/+15
In ICP, there are three TC ports and 3 DDI ports. v2: - Correct Pin mapping. v3: - Update pin mapping into per platform implementation rather than previous approach of port wise mapping. v4: - Update GMBUS_NUM_PINS (Paulo) v5: - rebase. v6: - Update function name, GMBUS_PIN_NUM (Paulo) v7 (from Paulo): - Make it apply. v8 (from Paulo): - Maintain consistent if ladder ordering. Suggested by: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-8-paulo.r.zanoni@intel.com
2018-01-08drm/i915: Add function to output Aksv over GMBUSSean Paul1-3/+44
Once the Aksv is available in the PCH, we need to get it on the wire to the receiver via DDC. The hardware doesn't allow us to read the value directly, so we need to tell GMBUS to source the Aksv internally and send it to the right offset on the receiver. The way we do this is to initiate an indexed write where the index is the Aksv register offset. We write dummy values to GMBUS3 as if we were sending the key, and the hardware slips in the "real" values when it goes out. Changes in v2: - None Changes in v3: - Uses new index write feature (Ville) Changes in v4: - None Changes in v5: - checkpatch whitespace fix Changes in v6: - None Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-8-seanpaul@chromium.org
2018-01-08drm/i915: Make use of indexed write GMBUS featureSean Paul1-14/+20
This patch enables the indexed write feature of the GMBUS to concatenate 2 consecutive messages into one. The criteria for an indexed write is that both messages are writes, the first is length == 1, and the second is length > 0. The first message is sent out by the GMBUS as the slave command, and the second one is sent via the GMBUS FIFO as usual. Changes in v3: - Added to series Changes in v4: - Combine indexed reads and writes (Ville) Changes in v5: - checkpatch whitespace nits Changes in v6: - None Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-7-seanpaul@chromium.org
2017-12-22drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+Ville Syrjälä1-0/+40
Gen9+ need to disable GMBUS clock gating when doing multi part transfers. Otherwise clock gating will kick in when GMBUS is in the WAIT state and presumably that will corrupt the transfer. This is documented as Display WA #0868. Apparently older hardware doesn't allow clock gating in the WAIT state and thus are unaffected by this problem. v2: Limit the PCH w/a to gen9 and gen10 only (DK) Actually change it to check the PCH type instead since it's the PCH that actually contains the GMBUS hardware Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20171221202432.17373-1-ville.syrjala@linux.intel.com
2017-12-22drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/aVille Syrjälä1-9/+12
Give a proper name for the GMBUS clock gating disable bit on PNV, and rename intel_i2c_quirk_set() to pnv_gmbus_clock_gating() for clarity. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-11-24drm/i915: Prevent zero length "index" writeVille Syrjälä1-1/+2
The hardware always writes one or two bytes in the index portion of an indexed transfer. Make sure the message we send as the index doesn't have a zero length. Cc: stable@vger.kernel.org Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-11-24drm/i915: Don't try indexed reads to alternate slave addressesVille Syrjälä1-0/+1
We can only specify the one slave address to indexed reads/writes. Make sure the messages we check are destined to the same slave address before deciding to do an indexed transfer. Cc: stable@vger.kernel.org Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-09-01drm/i915: Make i2c lock ops staticVille Syrjälä1-1/+1
Make gmbus_lock_ops and proxy_lock_ops static to appease sparse intel_i2c.c:652:34: warning: symbol 'gmbus_lock_ops' was not declared. Should it be static? intel_sdvo.c:2981:34: warning: symbol 'proxy_lock_ops' was not declared. Should it be static? Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: a85066840d29 ("drm/i915: Rework sdvo proxy i2c locking") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-07-27drm/i915: Rework sdvo proxy i2c lockingDaniel Vetter1-2/+34
lockdep complaints about a locking recursion for the i2c bus lock because both the sdvo ddc proxy bus and the gmbus nested within use the same locking class. It's not really a deadlock since we never nest the other way round, but it's annoying. Fix it by pulling the gmbus locking into the i2c lock_ops for both i2c_adapater and making sure that the ddc_proxy_xfer function is entirely lockless. Re-layouting the extracted function resulted in some whitespace cleanups, I figured we might as well keep them. v2: Review from Chris: - s/locked/unlocked/ since I got the naming backwards - Use the vfuncs of the proxied adatper instead of re-rolling copies. That's more consistent with the other proxying we're doing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170726132647.31833-1-daniel.vetter@ffwll.ch
2017-06-02drm/i915/cnp: add CNP gmbus supportRodrigo Vivi1-2/+13
On CNP PCH based platforms the gmbus is on the south display that is on PCH. The existing implementation for previous platforms already covers the need for CNP expect for the pin pair configuration that follows similar definitions that we had on BXT. v2: Don't drop "_BXT" as the indicator of the first platform supporting this pin numbers. Suggested by Daniel. v3: Add missing else and fix register table since CNP GPIO_CTL starts on 0xC5014. v4: Fix pin number and map according to the current available VBT. Re-add pin 4 for port D. Lost during some rebase. v5: Use table as spec. If VBT is wrong it should be ignored. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-5-git-send-email-rodrigo.vivi@intel.com
2017-01-24drm/i915: Introduce IS_GEN9_BC for Skylake and Kabylake.Rodrigo Vivi1-2/+2
Along with GLK it was introduced the .is_lp and IS_GEN9_LP. So, following the same simplification standard we can put Skylake and Kabylake under the same bucket for most of the things. So let's add the IS_GEN9_BC for "Big Core" (non Atom based platforms). The i915_drv.c was let out of this patch on purpose because that is really a decision per platform, just like other cases where IS_KABYLAKE is different from IS_SKYLAKE. v2: fix conflict with IS_LP and 3 new cases for this big core bucket: - intel_ddi.c: intel_ddi_get_link_dpll - intel_fbc.c: find_compression_threshold - i915_gem_gtt.c: gtt_write_workarounds Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485196357-30599-2-git-send-email-rodrigo.vivi@intel.com
2016-12-07drm/i915: add some more "i" in platform names for consistencyJani Nikula1-1/+1
Consistency FTW. Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/9ab811dc06570bd3fc05a917ade1bdc9bb805a75.1480520526.git.jani.nikula@intel.com
2016-12-02drm/i915/glk: Reuse broxton code for geminilakeAnder Conselvan de Oliveira1-2/+2
Geminilake is mostly backwards compatible with broxton, so change most of the IS_BROXTON() checks to IS_GEN9_LP(). Differences between the platforms will be implemented in follow-up patches. v2: Don't reuse broxton's path in intel_update_max_cdclk(). Don't set plane count as in broxton. v3: Rebase v4: Include the check intel_bios_is_port_hpd_inverted(). Commit message. v5: Leave i915_dmc_info() out; glk's csr version != bxt's. (Rodrigo) v6: Rebase. v7: Convert a few mode IS_BROXTON() occurances in pps, ddi, dsi and pll code. (Rodrigo) v8: Squash a couple of DDI patches with more conversions. (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-2-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-12-01drm/i915: Make i915_save/restore_state and intel_i2c_reset take dev_privTvrtko Ursulin1-5/+3
dev_priv is more appropriate since it is used much more in these. v2: Commit message and keep the local pdev variable. (Joonas Lahtinen) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-12-01drm/i915: Make gmbus setup take dev_privTvrtko Ursulin1-5/+3
Simplify the code by passing the right argument in. v2: Commit message. (Joonas Lahtinen) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-10-17drm/i915: GMBUS don't need no forcewakeVille Syrjälä1-5/+0
GMBUS is part of the display engine, and thus has no need for forcewake. Let's not bother trying to grab it then. I don't recall if the display engine suffers from system hangs due to multiple accesses to the same "cacheline" in mmio space. I hope not since we're no longer protected by the uncore lock since commit 4e6c2d58ba86 ("drm/i915: Take forcewake once for the entire GMBUS transaction") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476272687-15070-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-10-14drm/i915: Make IS_CHERRYVIEW only take dev_privTvrtko Ursulin1-1/+1
Saves 864 bytes of .rodata strings and ~100 of .text. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make INTEL_DEVID only take dev_privTvrtko Ursulin1-3/+2
Saves 4472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make INTEL_PCH_TYPE & co only take dev_privTvrtko Ursulin1-1/+1
This saves 1872 bytes of .rodata strings. v2: * Rebase. * Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-08-22drm/i915: Take forcewake once for the entire GMBUS transactionChris Wilson1-68/+63
As we do many register reads within a very short period of time, hold the GMBUS powerwell from start to finish. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160819164503.17845-1-chris@chris-wilson.co.uk Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
2016-08-22drm/i915: pdev cleanupDavid Weinehall1-1/+2
In an effort to simplify things for a future push of dev_priv instead of dev wherever possible, always take pdev via dev_priv where feasible, eliminating the direct access from dev. Right now this only eliminates a few cases of dev, but it also obviates that we pass dev into a lot of functions where dev_priv would be the more obvious choice. v2: Fixed one more place missing in the previous patch set Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-5-david.weinehall@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-07-05drm/i915: Convert dev_priv->dev backpointers to dev_priv->drmChris Wilson1-3/+3
Since drm_i915_private is now a subclass of drm_device we do not need to chase the drm_i915_private->dev backpointer and can instead simply access drm_i915_private->drm directly. text data bss dec hex filename 1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko 1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko Created by the coccinelle script: @@ struct drm_i915_private *d; identifier i; @@ ( - d->dev->i + d->drm.i | - d->dev + &d->drm ) and for good measure the dev_priv->dev backpointer was removed entirely. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
2016-07-04drm/i915: Mass convert dev->dev_private to to_i915(dev)Chris Wilson1-3/+3
Since we now subclass struct drm_device, we can save pointer dances by noting the equivalence of struct drm_device and struct drm_i915_private, i.e. by using to_i915(). text data bss dec hex filename 1073824 4562 416 1078802 107612 drivers/gpu/drm/i915/i915.ko 1068976 4562 416 1073954 106322 drivers/gpu/drm/i915/i915.ko Created by the coccinelle script: @@ expression E; identifier p; @@ - struct drm_i915_private *p = E->dev_private; + struct drm_i915_private *p = to_i915(E); Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk
2016-06-30drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()Chris Wilson1-5/+5
By using the out-of-line intel_wait_for_register() not only do we can efficiency from using the hybrid wait_for() contained within, but we avoid code bloat from the numerous inlined loops, in total (all patches): text data bss dec hex filename 1078551 4557 416 1083524 108884 drivers/gpu/drm/i915/i915.ko 1070775 4557 416 1075748 106a24 drivers/gpu/drm/i915/i915.ko Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-39-git-send-email-chris@chris-wilson.co.uk
2016-04-12drm/i915: Make GMBUS timeout message DRM_DEBUG_KMSVille Syrjälä1-2/+2
There's no real reason the user should care that we're about to fall back to bitbanging, so let's change the message from DRM_INFO to DRM_DEBUG_KMS. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-5-git-send-email-ville.syrjala@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94890 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-12drm/i915: Restore GMBUS operation after a failed bit-banging fallbackVille Syrjälä1-3/+7
When the GMBUS based i2c transfer times out, we try to fall back to bit-banging and retry the operation that way. However if the bit-banging attempt also fails, we should probably go back to the GMBUS method for the next attempt. Maybe there simply wasn't anyone one the bus at this time. There's also a bit of a mess going on with the force_bit handling. It's supposed to be a ref count actually, and it is as far as intel_gmbus_force_bit() is concerned. But it's treated as just a flag by the timeout based bit-banging fallback. I suppose that's fine since we should never end up in the timeout fallback case if force_bit was already non-zero. However now that we want to restore things back to where they were after the bit-banging attempt failed, we're going to have to do things a bit differently to avoid clobbering the force_bit count as set up by intel_gmbus_force_bit(). So let's dedicate the high bit as a flag for the low level timeout based fallback and treat the rest of the bits as a ref count just as before. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2016-04-12drm/i915: Protect force_bit with gmbus_mutexVille Syrjälä1-0/+5
Extend the protection of gmbus_mutex around the force_bit RMW in intel_gmbus_force_bit(), in case someone gets the idea of calling it from a separate thread while there's other stuff happening on the same bus. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2016-04-07drm/i915: Do not use {HAS_*, IS_*, INTEL_INFO}(dev_priv->dev)Joonas Lahtinen1-3/+3
dev_priv is what the macro works hard to extract, pass it directly. > sed 's/\([A-Z].*(dev_priv\)->dev)/\1)/g' v2: - Include all wrapper macros too (Chris) v3: - Include sed cmdline (Chris) v4: - Break long line - Rebase Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460016485-8089-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-03-09drm/i915: Actually retry with bit-banging after GMBUS timeoutVille Syrjälä1-0/+6
After the GMBUS transfer times out, we set force_bit=1 and return -EAGAIN expecting the i2c core to call the .master_xfer hook again so that we will retry the same transfer via bit-banging. This is in case the gmbus hardware is somehow faulty. Unfortunately we left adapter->retries to 0, meaning the i2c core didn't actually do the retry. Let's tell the core we want one retry when we return -EAGAIN. Note that i2c-algo-bit also uses this retry count for some internal retries, so we'll end up increasing those a bit as well. Cc: Jani Nikula <jani.nikula@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2016-02-10drm/i915: fix error path in intel_setup_gmbus()Rasmus Villemoes1-1/+1
This fails to undo the setup for pin==0; moreover, something interesting happens if the setup failed already at pin==0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: f899fc64cda8 ("drm/i915: use GMBUS to manage i2c links") Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk
2015-12-10drm/i915: Separate cherryview from valleyviewWayne Boyer1-1/+1
The cherryview device shares many characteristics with the valleyview device. When support was added to the driver for cherryview, the corresponding device info structure included .is_valleyview = 1. This is not correct and leads to some confusion. This patch changes .is_valleyview to .is_cherryview in the cherryview device info structure and simplifies the IS_CHERRYVIEW macro. Then where appropriate, instances of IS_VALLEYVIEW are replaced with IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent. v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro. Also add followup patches to fix issues discovered during the first review. (Ville) v3: Fix some style issues and one gen check. Remove CRT related changes as CRT is not supported on CHV. (Imre, Ville) v4: Make a few more optimizations. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Wayne Boyer <wayne.boyer@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449692975-14803-1-git-send-email-wayne.boyer@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915: abstract i2c bit banging fallback in gmbus xferJani Nikula1-14/+25
Choose between i2c bit banging and gmbus in a new higher level function, and let the i2c core retry the first time we fall back to bit banging. The i2c core imposes a timeout on -EAGAIN, but it defaults to 1 second, and shouldn't be a problem for us. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448980166-23055-2-git-send-email-jani.nikula@intel.com
2015-12-02drm/i915: simplify gmbus xfer error checksJani Nikula1-8/+4
Shorter, easier to follow code with no functional changes. In all cases, the return value ultimately comes from gmbus_wait_hw_status() anyway. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448980166-23055-1-git-send-email-jani.nikula@intel.com
2015-11-18drm/i915: Type safe register read/writeVille Syrjälä1-7/+9
Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18drm/i915: Streamline gpio_mmio_base deductionVille Syrjälä1-8/+7
If we ignore the BXT situation, we can observe that the only variables affecting gpio_mmio_base is IS_VALLEVIEW and HAS_GMCH_DISPLAY. The BXT situation we can fit into the same pattern if we change gmbus_pins_bxt[] to house the GMCH GPIO register offsets (like we do for all other platfotms). So let's do that. We could even simplify the VLV situation more by including the display_mmio_offset in the GPIO register defines, but let's leave it be for now. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446672017-24497-13-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17drm/i915: Introduce a gmbus power domainVille Syrjälä1-2/+4
Currently the gmbus code uses intel_aux_display_runtime_get/put in an effort to make sure the hardware is powered up sufficiently for gmbus. That function only takes the runtime PM reference which on VLV/CHV/BXT is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well 2 on BXT. So add a new power domnain for gmbus and kill off the now unused intel_aux_display_runtime_get/put. And change intel_hdmi_set_edid() to use the gmbus power domain too since that's all we need there. Also toss in a BUILD_BUG_ON() to catch problems if we run out of bits for power domains. We're already really close to the limit... [Patrik: Add gmbus string to debugfs output] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447084107-8521-5-git-send-email-patrik.jakobsson@linux.intel.com
2015-10-28drm/i915/kbl: Introduce Kabylake platform defition.Rodrigo Vivi1-2/+2
Kabylake is a Intel® Processor containing Intel® HD Graphics following Skylake. It is Gen9p5, so it inherits everything from Skylake. Let's start by adding the platform separated from Skylake but reusing most of all features, functions etc. Later we rebase the PCI-ID patch without is_skylake=1 so we don't replace what original Author did there. Few IS_SKYLAKEs if statements are not being covered by this patch on purpose: - Workarounds: Kabylake is derivated from Skylake H0 so no W/As apply here. - GuC: A following patch removes Kabylake support with an explanation: No firmware available yet. - DMC/CSR: Done in a separated patch since we need to be carefull and load the version for revision 7 since Kabylake is Skylake H0. v2: relative cleaner commit message and added the missed IS_KABYLAKE to intel_i2c.c as pointed out by Jani. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-10-13drm/i915: Include gpio_mmio_base in GMBUS reg definesVille Syrjälä1-31/+23
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-26Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-28/+90
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.2. I've one other new driver from freescale on my radar, it's been posted and reviewed, I'd just like to get someone to give it a last look, so maybe I'll send it or maybe I'll leave it. There is no major nouveau changes in here, Ben was working on something big, and we agreed it was a bit late, there wasn't anything else he considered urgent to merge. There might be another msm pull for some bits that are waiting on arm-soc, I'll see how we time it. This touches some "of" stuff, acks are in place except for the fixes to the build in various configs,t hat I just applied. Summary: New drivers: - virtio-gpu: KMS only pieces of driver for virtio-gpu in qemu. This is just the first part of this driver, enough to run unaccelerated userspace on. As qemu merges more we'll start adding the 3D features for the virgl 3d work. - amdgpu: a new driver from AMD to driver their newer GPUs. (VI+) It contains a new cleaner userspace API, and is a clean break from radeon moving forward, that AMD are going to concentrate on. It also contains a set of register headers auto generated from AMD internal database. core: - atomic modesetting API completed, enabled by default now. - Add support for mode_id blob to atomic ioctl to complete interface. - bunch of Displayport MST fixes - lots of misc fixes. panel: - new simple panels - fix some long-standing build issues with bridge drivers radeon: - VCE1 support - add a GPU reset counter for userspace - lots of fixes. amdkfd: - H/W debugger support module - static user-mode queues - support killing all the waves when a process terminates - use standard DECLARE_BITMAP i915: - Add Broxton support - S3, rotation support for Skylake - RPS booting tuning - CPT modeset sequence fixes - ns2501 dither support - enable cmd parser on haswell - cdclk handling fixes - gen8 dynamic pte allocation - lots of atomic conversion work exynos: - Add atomic modesetting support - Add iommu support - Consolidate drm driver initialization - and MIC, DECON and MIPI-DSI support for exynos5433 omapdrm: - atomic modesetting support (fixes lots of things in rewrite) tegra: - DP aux transaction fixes - iommu support fix msm: - adreno a306 support - various dsi bits - various 64-bit fixes - NV12MT support rcar-du: - atomic and misc fixes sti: - fix HDMI timing complaince tilcdc: - use drm component API to access tda998x driver - fix module unloading qxl: - stability fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits) drm/nouveau: Pause between setting gpu to D3hot and cutting the power drm/dp/mst: close deadlock in connector destruction. drm: Always enable atomic API drm/vgem: Set unique to "vgem" of: fix a build error to of_graph_get_endpoint_by_regs function drm/dp/mst: take lock around looking up the branch device on hpd irq drm/dp/mst: make sure mst_primary mstb is valid in work function of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/atomic: Don't set crtc_state->enable manually drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver ...
2015-06-09drm/i915: Fix DDC probe for passive adaptersJani Nikula1-3/+17
Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI devices, as they do not have a sink device in them to respond to any AUX traffic. When probing these dongles over the DDC, sometimes they will NAK the first attempt even though the transaction is valid and they support the DDC protocol. The retry loop inside of drm_do_probe_ddc_edid() would normally catch this case and try the transaction again, resulting in success. That, however, was thwarted by the fix for [1]: commit 9292f37e1f5c79400254dca46f83313488093825 Author: Eugeni Dodonov <eugeni.dodonov@intel.com> Date: Thu Jan 5 09:34:28 2012 -0200 drm: give up on edid retries when i2c bus is not responding This added code to exit immediately if the return code from the i2c_transfer function was -ENXIO in order to reduce the amount of time spent in waiting for unresponsive or disconnected devices. That was possible because the underlying i2c bit banging algorithm had retries of its own (which, of course, were part of the reason for the bug the commit fixes). Since its introduction in commit f899fc64cda8569d0529452aafc0da31c042df2e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links we've been flipping back and forth enabling the GMBUS transfers, but we've settled since then. The GMBUS implementation does not do any retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop on first encounter of -ENXIO. This, combined with Eugeni's commit, broke the retry on -ENXIO. Retry GMBUS once on -ENXIO on first message to mitigate the issues with passive adapters. This patch is based on the work, and commit message, by Todd Previte <tprevite@gmail.com>. [1] https://bugs.freedesktop.org/show_bug.cgi?id=41059 v2: Don't retry if using bit banging. v3: Move retry within gmbux_xfer, retry only on first message. v4: Initialize GMBUS0 on retry (Ville). v5: Take index reads into account (Ville). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924 Cc: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2) Tested-by: Jim Bride <jim.bride@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-20drm/i915: don't register invalid gmbus pins for sklJani Nikula1-0/+10
Do not expose invalid gmbus pins as i2c devices to userspace. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-20drm/i915: don't register invalid gmbus pins for bdwJani Nikula1-0/+11
Do not expose invalid gmbus pins as i2c devices to userspace. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-08Merge tag 'drm-intel-next-2015-04-23-fixed' of ↵Dave Airlie1-28/+69
git://anongit.freedesktop.org/drm-intel into drm-next drm-intel-next-2015-04-23: - dither support for ns2501 dvo (Thomas Richter) - some polish for the gtt code and fixes to finally enable the cmd parser on hsw - first pile of bxt stage 1 enabling (too many different people to list ...) - more psr fixes from Rodrigo - skl rotation support from Chandra - more atomic work from Ander and Matt - pile of cleanups and micro-ops for execlist from Chris drm-intel-next-2015-04-10: - cdclk handling cleanup and fixes from Ville - more prep patches for olr removal from John Harrison - gmbus pin naming rework from Jani (prep for bxt) - remove ->new_config from Ander (more atomic conversion work) - rps (boost) tuning and unification with byt/bsw from Chris - cmd parser batch bool tuning from Chris - gen8 dynamic pte allocation (Michel Thierry, based on work from Ben Widawsky) - execlist tuning (not yet all of it) from Chris - add drm_plane_from_index (Chandra) - various small things all over * tag 'drm-intel-next-2015-04-23-fixed' of git://anongit.freedesktop.org/drm-intel: (204 commits) drm/i915/gtt: Allocate va range only if vma is not bound drm/i915: Enable cmd parser to do secure batch promotion for aliasing ppgtt drm/i915: fix intel_prepare_ddi drm/i915: factor out ddi_get_encoder_port drm/i915/hdmi: check port in ibx_infoframe_enabled drm/i915/hdmi: fix vlv infoframe port check drm/i915: Silence compiler warning in dvo drm/i915: Update DRIVER_DATE to 20150423 drm/i915: Enable dithering on NatSemi DVO2501 for Fujitsu S6010 rm/i915: Move i915_get_ggtt_vma_pages into ggtt_bind_vma drm/i915: Don't try to outsmart gcc in i915_gem_gtt.c drm/i915: Unduplicate i915_ggtt_unbind/bind_vma drm/i915: Move ppgtt_bind/unbind around drm/i915: move i915_gem_restore_gtt_mappings around drm/i915: Fix up the vma aliasing ppgtt binding drm/i915: Remove misleading comment around bind_to_vm drm/i915: Don't use atomics for pg_dirty_rings drm/i915: Don't look at pg_dirty_rings for aliasing ppgtt drm/i915/skl: Support Y tiling in MMIO flips drm/i915: Fixup kerneldoc for struct intel_context ... Conflicts: drivers/gpu/drm/i915/i915_drv.c
2015-04-23drm/i915: cope with large i2c transfersDmitry Torokhov1-10/+56
The hardware, according to the specs, is limited to 256 byte transfers, and current driver has no protections in case users attempt to do larger transfers. The code will just stomp over status register and mayhem ensues. Let's split larger transfers into digestable chunks. Doing this allows Atmel MXT driver on Pixel 1 function properly (it hasn't since commit 9d8dc3e529a19e427fd379118acd132520935c5d "Input: atmel_mxt_ts - implement T44 message handling" which tries to consume multiple touchscreen/touchpad reports in a single transaction). Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-14drm/i915: add bxt gmbus supportJani Nikula1-3/+27
For BXT gmbus is pulled from PCH to CPU. From implementation point of view only pin pair configuration will change. The existing implementation supports all platforms previous to GEN8 and also SKL. But for BXT pin pair configuration is completely different than SKL or other previous GEN's. This patch introduces the new pin pair configuration structure specific to BXT and also ensures every real gmbus port has a gpio pin. v3 by Jani: with the platform independent prep work in place, the bxt enabling reduces to a fairly trivial patch. Credits are due Sunil for giving me the ideas (with his patches) what the platform independent parts should look like. v4: Fix intel_hdmi_init_connector() for bxt. Abstract gmbus_pin access more. s/GPU/PCH/ in commit message. v5: Rebase. Issue: VIZ-3574 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-01drm/i915: base gmbus pin validity check on the gmbus pin map arrayJani Nikula1-4/+10
This will be helpful for adding future platforms. It is better to keep the information in the single point of truth (the table) instead of duplicating it into the validity function. While at it, add dev_priv parameter to the function, also to prepare for adding future platform support. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-01drm/i915: index gmbus tables using the pin pair numberJani Nikula1-27/+38
Index the gmbus tables directly using the pin instead of having a confusing "port = i + 1" mapping. This finishes off removing the "gmbus port" as a notion, and leaves us with just the "gmbus pin". As pin 0 is invalid by definition and the gmbus tables will have a gap at that index, add pin validity check to all the loops. This will be benefitial for supporting platforms that have different numbers of pins, or gaps. v2: s/GMBUS_PIN_MAX/GMBUS_NUM_PINS/ (Ville, Daniel) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-01drm/i915: refer to pin instead of port in the intel_i2c.c interfacesJani Nikula1-4/+4
Rename intel_gmbus_is_port_valid to intel_gmbus_is_valid_pin, and rename port parameters to pin as well. This matches usage all around, as usually a pin is passed to the validity check function. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-07drm/i915: Kill duplicated cdclk readout code from i2cVille Syrjälä1-54/+0
We have a slightly different way of readoing out the cdclk in gmbus_set_freq(). Kill that and just call .get_display_clock_speed(). Also need to remove the GMBUSFREQ update from intel_i2c_reset() since that gets called way too early. Let's do it in intel_modeset_init_hw() instead, and also pull the initial vlv_cdclk_freq update there from init_clock gating. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 11:19:08 +0300