| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).
Driver Changes:
- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
|
|
Change 'freqency' to 'frequency'.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520080646.24132-1-samirweng1979@163.com
|
|
There are some places at drm that ended receiving a
REPLACEMENT CHARACTER U+fffd ('�'), probably because of
some bad charset conversion.
Fix them by using what it seems to be the proper
character.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e606930c73029f16673849c57acac061dd923866.1621412009.git.mchehab+huawei@kernel.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.14:
UAPI Changes:
* drm: Disable connector force-probing for non-master clients
* drm: Enforce consistency between IN_FORMATS property and cap + related
driver cleanups
* drm/amdgpu: Track devices, process info and fence info via
/proc/<pid>/fdinfo
* drm/ioctl: Mark AGP-related ioctls as legacy
* drm/ttm: Provide tt_shrink file to trigger shrinker via debugfs;
Cross-subsystem Changes:
* fbdev/efifb: Special handling of non-PCI devices
* fbdev/imxfb: Fix error message
Core Changes:
* drm: Add connector helper to attach HDR-metadata property and convert
drivers
* drm: Add connector helper to compare HDR-metadata and convert drivers
* drm: Add conenctor helper to attach colorspace property
* drm: Signal colorimetry in HDMI infoframe
* drm: Support pitch for destination buffers; Add blitter function
with generic format conversion
* drm: Remove struct drm_device.pdev and update legacy drivers
* drm: Remove obsolete DRM_KMS_FB_HELPER config option in core and drivers
* drm: Remove obsolete drm_pci_alloc/drm_pci_free
* drm/aperture: Add helpers for aperture ownership and convert drivers, replaces rsp fbdev helpers
* drm/agp: Mark DRM AGP code as legacy and convert legacy drivers
* drm/atomic-helpers: Cleanups
* drm/dp: Handle downstream port counts of 0 correctly; AUX channel fixes; Use
drm_err_*/drm_dbg_*(); Cleanups
* drm/dp_dual_mode: Use drm_err_*/drm_dbg_*()
* drm/dp_mst: Use drm_err_*/drm_dbg_*(); Use Extended Base Receiver Capability DPCD space
* drm/gem-ttm-helper: Provide helper for dumb_map_offset and convert drivers
* drm/panel: Use sysfs_emit; panel-simple: Use runtime PM, Power up panel
when reading EDID, Cache EDID, Cleanups;
Lms397KF04: DT bindings
* drm/pci: Mark AGP helpers as legacy
* drm/print: Handle NULL for DRM devices gracefully
* drm/scheduler: Change scheduled fence track
* drm/ttm: Don't count SG BOs against pages_limit; Warn about freeing pinned
BOs; Fix error handling if no BO can be swapped out; Move special
handling of non-GEM drivers into vmwgfx; Move page_alignment into
the BO; Set drm-misc as TTM tree in MAINTAINERS; Cleanup
ttm_agp_backend; Add ttm_sys_manager for system domain; Cleanups
Driver Changes:
* drm: Don't set allow_fb_modifiers explictly in drivers
* drm/amdgpu: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages
* drm/ast: Use managed pcim_iomap(); Fix EDID retrieval with DP501
* drm/bridge: MHDP8546: HDCP support + DT bindings, Register DP AUX channel
with userspace; Sil8620: Fix module dependencies; dw-hdmi: Add option to
not load CEC driver; Fix stopping in drm_bridge_chain_pre_enable();
Ti-sn65dsi86: Fix refclk handling, Break GPIO and MIPI-to-eDP into
subdrivers, Use pm_runtime autosuspend, cleanups; It66121: Add
driver + DT bindings; Adv7511: Support I2S IEC958 encoding; Anx7625: fix
power-on delay; Nwi-dsi: Modesetting fixes; Cleanups
* drm/bochs: Support screen blanking
* drm/gma500: Cleanups
* drm/gud: Cleanups
* drm/i915: Use correct max source link rate for MST
* drm/kmb: Cleanups
* drm/meson: Disable dw-hdmi CEC driver
* drm/nouveau: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages; Register AUX adapters after their connectors
* drm/qxl: Fix shadow BO unpin
* drm/radeon: Duplicate some DRM AGP code to uncouple from legacy drivers
* drm/simpledrm: Add a generic DRM driver for simple-framebuffer devices
* drm/tiny: Fix log spam if probe function gets deferred
* drm/vc4: Add support for HDR-metadata property; Cleanups
* drm/virtio: Create dumb BOs as guest blobs;
* drm/vkms: Use managed drmm_universal_plane_alloc(); Add XRGB plane
composition; Add overlay support
* drm/vmwgfx: Enable console with DRM_FBDEV_EMULATION; Fix CPU updates
of coherent multisample surfaces; Remove reservation semaphore; Add
initial SVGA3 support; Support amd64; Use 1-based IDR; Use min_t();
Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YJvkD523evviED01@linux-uq9g.fritz.box
|
|
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.
Fixes: ef99a60ffd9b ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071
Reviewed-By: Manuel Bentele <development@manuel-bentele.de>
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo removed invalid Fixes line]
Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
|
|
Time to get back in sync...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Our code analyzer reported a double free bug.
In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated
via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base
is freed by i915_gem_object_put() with a reference dropped. Then free_pd
calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put()
to put pde->pt.base again.
As pde->pt.base is protected by refcount, so the second put will not free
pde->pt.base actually. But, maybe it is better to remove the first put?
Fixes: 82adf901138cc ("drm/i915/gt: Shrink i915_page_directory's slab bucket")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426124340.4238-1-lyl2019@mail.ustc.edu.cn
(cherry picked from commit ac69496fe65cca0611d5917b7d232730ff605bc7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them
as such.
Fixes: 1c8242c3a4b2 ("drm/i915: Use unchecked writes for setting up the fences")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-3-ville.syrjala@linux.intel.com
(cherry picked from commit f765a5b48c667bdada5e49d5e0f23f8c0687b21b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Backmerging to get v5.12 fixes. Requested for vmwgfx.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Commit fb5970da1b42 ("drm/i915/gt: Use the kernel_context to measure the
breadcrumb size") reordered some operations inside engine_init_common()
and added an error unwind path to that function. In that path, a
reference to a kernel context candidate supposed to be released on error
was put, but the context, pinned when created, was not unpinned first.
Fix it by replacing intel_context_put() with destroy_pinned_context()
introduced later by commit b436a5f8b6c8 ("drm/i915/gt: Track all timelines
created using the HWSP").
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507144251.376538-1-janusz.krzysztofik@linux.intel.com
|
|
Same workaround was listed two times - once under the Gen7 block and once
under the Haswell section.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507084926.2423003-1-tvrtko.ursulin@linux.intel.com
|
|
Add support for DPT (display page table). DPT is a
slightly peculiar two level page table scheme used for
tiled scanout buffers (linear uses direct ggtt mapping
still). The plane surface address will point at a page
in the DPT which holds the PTEs for 512 actual pages.
Thus we require 1/512 of the ggttt address space
compared to a direct ggtt mapping.
We create a new DPT address space for each framebuffer and
track two vmas (one for the DPT, another for the ggtt).
TODO:
- Is the i915_address_space approaach sane?
- Maybe don't map the whole DPT to write the PTEs?
- Deal with remapping/rotation? Need to create a
separate DPT for each remapped/rotated plane I
guess. Or else we'd need to make the per-fb DPT
large enough to support potentially several
remapped/rotated vmas. How large should that be?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Wilson Chris P <Chris.P.Wilson@intel.com>
Cc: Tang CQ <cq.tang@intel.com>
Cc: Auld Matthew <matthew.auld@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Wilson Chris P <Chris.P.Wilson@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-5-imre.deak@intel.com
|
|
We use some of the lower bits of the retire function pointer for
potential flags, which is quite thorny, since the caller needs to
remember to give the function the correct alignment with
__i915_active_call, otherwise we might incorrectly unpack the pointer
and jump to some garbage address later. Instead of all this let's just
pass the flags along as a separate parameter.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
References: ca419f407b43 ("drm/i915: Fix crash in auto_retire")
References: d8e44e4dd221 ("drm/i915/overlay: Fix active retire callback alignment")
References: fd5f262db118 ("drm/i915/selftests: Fix active retire callback alignment")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504164136.96456-1-matthew.auld@intel.com
|
|
__i915_active_call annotation is required on the retire callback to ensure
correct function alignment.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429083530.849546-2-tvrtko.ursulin@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
References to struct drm_device.pdev should not be used any longer as
the field will be moved into the struct's legacy section. Add a fix
for the rsp commit.
v8:
* fix commit message (Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: a50ca39fbd01 ("drm/i915: setup the LMEM region")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: "Michał Winiarski" <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-3-tzimmermann@suse.de
|
|
The stop_machine() lock may allocate memory, but is called inside
vm->mutex, which is taken in the shrinker. This will cause a lockdep
splat, as can be seen below:
<4>[ 462.585762] ======================================================
<4>[ 462.585768] WARNING: possible circular locking dependency detected
<4>[ 462.585773] 5.12.0-rc5-CI-Trybot_7644+ #1 Tainted: G U
<4>[ 462.585779] ------------------------------------------------------
<4>[ 462.585783] i915_selftest/5540 is trying to acquire lock:
<4>[ 462.585788] ffffffff826440b0 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x12/0x30
<4>[ 462.585814]
but task is already holding lock:
<4>[ 462.585818] ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915]
<4>[ 462.586301]
which lock already depends on the new lock.
<4>[ 462.586305]
the existing dependency chain (in reverse order) is:
<4>[ 462.586309]
-> #2 (&vm->mutex/1){+.+.}-{3:3}:
<4>[ 462.586323] i915_gem_shrinker_taints_mutex+0x2d/0x50 [i915]
<4>[ 462.586719] i915_address_space_init+0x12d/0x130 [i915]
<4>[ 462.587092] ppgtt_init+0x4e/0x80 [i915]
<4>[ 462.587467] gen8_ppgtt_create+0x3e/0x5c0 [i915]
<4>[ 462.587828] i915_ppgtt_create+0x28/0xf0 [i915]
<4>[ 462.588203] intel_gt_init+0x123/0x370 [i915]
<4>[ 462.588572] i915_gem_init+0x129/0x1f0 [i915]
<4>[ 462.588971] i915_driver_probe+0x753/0xd80 [i915]
<4>[ 462.589320] i915_pci_probe+0x43/0x1d0 [i915]
<4>[ 462.589671] pci_device_probe+0x9e/0x110
<4>[ 462.589680] really_probe+0xea/0x410
<4>[ 462.589690] driver_probe_device+0xd9/0x140
<4>[ 462.589697] device_driver_attach+0x4a/0x50
<4>[ 462.589704] __driver_attach+0x83/0x140
<4>[ 462.589711] bus_for_each_dev+0x75/0xc0
<4>[ 462.589718] bus_add_driver+0x14b/0x1f0
<4>[ 462.589724] driver_register+0x66/0xb0
<4>[ 462.589731] i915_init+0x70/0x87 [i915]
<4>[ 462.590053] do_one_initcall+0x56/0x2e0
<4>[ 462.590061] do_init_module+0x55/0x200
<4>[ 462.590068] load_module+0x2703/0x2990
<4>[ 462.590074] __do_sys_finit_module+0xad/0x110
<4>[ 462.590080] do_syscall_64+0x33/0x80
<4>[ 462.590089] entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[ 462.590096]
-> #1 (fs_reclaim){+.+.}-{0:0}:
<4>[ 462.590109] fs_reclaim_acquire+0x9f/0xd0
<4>[ 462.590118] kmem_cache_alloc_trace+0x3d/0x430
<4>[ 462.590126] intel_cpuc_prepare+0x3b/0x1b0
<4>[ 462.590133] cpuhp_invoke_callback+0x9e/0x890
<4>[ 462.590141] _cpu_up+0xa4/0x130
<4>[ 462.590147] cpu_up+0x82/0x90
<4>[ 462.590153] bringup_nonboot_cpus+0x4a/0x60
<4>[ 462.590159] smp_init+0x21/0x5c
<4>[ 462.590167] kernel_init_freeable+0x8a/0x1b7
<4>[ 462.590175] kernel_init+0x5/0xff
<4>[ 462.590181] ret_from_fork+0x22/0x30
<4>[ 462.590187]
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
<4>[ 462.590199] __lock_acquire+0x1520/0x2590
<4>[ 462.590207] lock_acquire+0xd1/0x3d0
<4>[ 462.590213] cpus_read_lock+0x39/0xc0
<4>[ 462.590219] stop_machine+0x12/0x30
<4>[ 462.590226] bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915]
<4>[ 462.590601] ggtt_bind_vma+0x5d/0x80 [i915]
<4>[ 462.590970] i915_vma_bind+0xdc/0x1c0 [i915]
<4>[ 462.591374] i915_vma_pin_ww+0x435/0xb40 [i915]
<4>[ 462.591779] make_obj_busy+0xcb/0x330 [i915]
<4>[ 462.592170] igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915]
<4>[ 462.592562] __i915_subtests.cold.7+0x42/0x92 [i915]
<4>[ 462.592995] __run_selftests.part.3+0x10d/0x172 [i915]
<4>[ 462.593428] i915_live_selftests.cold.5+0x1f/0x47 [i915]
<4>[ 462.593860] i915_pci_probe+0x93/0x1d0 [i915]
<4>[ 462.594210] pci_device_probe+0x9e/0x110
<4>[ 462.594217] really_probe+0xea/0x410
<4>[ 462.594226] driver_probe_device+0xd9/0x140
<4>[ 462.594233] device_driver_attach+0x4a/0x50
<4>[ 462.594240] __driver_attach+0x83/0x140
<4>[ 462.594247] bus_for_each_dev+0x75/0xc0
<4>[ 462.594254] bus_add_driver+0x14b/0x1f0
<4>[ 462.594260] driver_register+0x66/0xb0
<4>[ 462.594267] i915_init+0x70/0x87 [i915]
<4>[ 462.594586] do_one_initcall+0x56/0x2e0
<4>[ 462.594592] do_init_module+0x55/0x200
<4>[ 462.594599] load_module+0x2703/0x2990
<4>[ 462.594605] __do_sys_finit_module+0xad/0x110
<4>[ 462.594612] do_syscall_64+0x33/0x80
<4>[ 462.594618] entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[ 462.594625]
other info that might help us debug this:
<4>[ 462.594629] Chain exists of:
cpu_hotplug_lock --> fs_reclaim --> &vm->mutex/1
<4>[ 462.594645] Possible unsafe locking scenario:
<4>[ 462.594648] CPU0 CPU1
<4>[ 462.594652] ---- ----
<4>[ 462.594655] lock(&vm->mutex/1);
<4>[ 462.594664] lock(fs_reclaim);
<4>[ 462.594671] lock(&vm->mutex/1);
<4>[ 462.594679] lock(cpu_hotplug_lock);
<4>[ 462.594686]
*** DEADLOCK ***
<4>[ 462.594690] 4 locks held by i915_selftest/5540:
<4>[ 462.594696] #0: ffff888100fbc240 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x18/0x50
<4>[ 462.594715] #1: ffffc900006cb9a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: make_obj_busy+0x81/0x330 [i915]
<4>[ 462.595118] #2: ffff88812a6081e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: make_obj_busy+0x21f/0x330 [i915]
<4>[ 462.595519] #3: ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915]
<4>[ 462.595934]
stack backtrace:
<4>[ 462.595939] CPU: 0 PID: 5540 Comm: i915_selftest Tainted: G U 5.12.0-rc5-CI-Trybot_7644+ #1
<4>[ 462.595947] Hardware name: GOOGLE Kefka/Kefka, BIOS MrChromebox 02/04/2018
<4>[ 462.595952] Call Trace:
<4>[ 462.595961] dump_stack+0x7f/0xad
<4>[ 462.595974] check_noncircular+0x12e/0x150
<4>[ 462.595982] ? save_stack.isra.17+0x3f/0x70
<4>[ 462.595991] ? drm_mm_insert_node_in_range+0x34a/0x5b0
<4>[ 462.596000] ? i915_vma_pin_ww+0x9ec/0xb40 [i915]
<4>[ 462.596410] __lock_acquire+0x1520/0x2590
<4>[ 462.596419] ? do_init_module+0x55/0x200
<4>[ 462.596429] lock_acquire+0xd1/0x3d0
<4>[ 462.596435] ? stop_machine+0x12/0x30
<4>[ 462.596445] ? gen8_ggtt_insert_entries+0xf0/0xf0 [i915]
<4>[ 462.596816] cpus_read_lock+0x39/0xc0
<4>[ 462.596824] ? stop_machine+0x12/0x30
<4>[ 462.596831] stop_machine+0x12/0x30
<4>[ 462.596839] bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915]
<4>[ 462.597210] ggtt_bind_vma+0x5d/0x80 [i915]
<4>[ 462.597580] i915_vma_bind+0xdc/0x1c0 [i915]
<4>[ 462.597986] i915_vma_pin_ww+0x435/0xb40 [i915]
<4>[ 462.598395] ? make_obj_busy+0xcb/0x330 [i915]
<4>[ 462.598786] make_obj_busy+0xcb/0x330 [i915]
<4>[ 462.599180] ? 0xffffffff81000000
<4>[ 462.599187] ? debug_mutex_unlock+0x50/0xa0
<4>[ 462.599198] igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915]
<4>[ 462.599592] __i915_subtests.cold.7+0x42/0x92 [i915]
<4>[ 462.600026] ? i915_perf_selftests+0x20/0x20 [i915]
<4>[ 462.600422] ? __i915_nop_setup+0x10/0x10 [i915]
<4>[ 462.600820] __run_selftests.part.3+0x10d/0x172 [i915]
<4>[ 462.601253] i915_live_selftests.cold.5+0x1f/0x47 [i915]
<4>[ 462.601686] i915_pci_probe+0x93/0x1d0 [i915]
<4>[ 462.602037] ? _raw_spin_unlock_irqrestore+0x3d/0x60
<4>[ 462.602047] pci_device_probe+0x9e/0x110
<4>[ 462.602057] really_probe+0xea/0x410
<4>[ 462.602067] driver_probe_device+0xd9/0x140
<4>[ 462.602075] device_driver_attach+0x4a/0x50
<4>[ 462.602084] __driver_attach+0x83/0x140
<4>[ 462.602091] ? device_driver_attach+0x50/0x50
<4>[ 462.602099] ? device_driver_attach+0x50/0x50
<4>[ 462.602107] bus_for_each_dev+0x75/0xc0
<4>[ 462.602116] bus_add_driver+0x14b/0x1f0
<4>[ 462.602124] driver_register+0x66/0xb0
<4>[ 462.602133] i915_init+0x70/0x87 [i915]
<4>[ 462.602453] ? 0xffffffffa0606000
<4>[ 462.602458] do_one_initcall+0x56/0x2e0
<4>[ 462.602466] ? kmem_cache_alloc_trace+0x374/0x430
<4>[ 462.602476] do_init_module+0x55/0x200
<4>[ 462.602484] load_module+0x2703/0x2990
<4>[ 462.602500] ? __do_sys_finit_module+0xad/0x110
<4>[ 462.602507] __do_sys_finit_module+0xad/0x110
<4>[ 462.602519] do_syscall_64+0x33/0x80
<4>[ 462.602527] entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[ 462.602535] RIP: 0033:0x7fab69d8d89d
Changes since v1:
- Add lockdep annotations during init, to ensure that lockdep is primed.
This also fixes a false positive when reading /proc/lockdep_stats
during module reload.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426102351.921874-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Pull drm updates from Dave Airlie:
"The usual lots of work all over the place.
i915 has gotten some Alderlake work and prelim DG1 code, along with a
major locking rework over the GEM code, and brings back the property
of timing out long running jobs using a watchdog. amdgpu has some
Alderbran support (new GPU), freesync HDMI support along with a lot
other fixes.
Outside of the drm, there is a new printf specifier added which should
have all the correct acks/sobs:
- printk fourcc modifier support added %p4cc
Summary:
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
- SAGV watermark fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
- MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny"
* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
drm/ttm: Don't count pages in SG BOs against pages_limit
drm/ttm: fix return value check
drm/bridge: lt8912b: fix incorrect handling of of_* return values
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
drm/amdgpu: page retire over debugfs mechanism
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
drm/amd/display: Fix the Wunused-function warning
drm/radeon/r600: Fix variables that are not used after assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/amd/display: Update DCN302 SR Exit Latency
drm/amdgpu: enable ras eeprom on aldebaran
drm/amdgpu: RAS harvest on driver load
drm/amdgpu: add ras aldebaran ras eeprom driver
drm/amd/pm: increase time out value when sending msg to SMU
drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
drm/amd/pm: add the callback to get vbios bootup values for vangogh
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/amdgpu: move mmhub ras_func init to ip specific file
...
|
|
A bunch of files have a stray newline at the end. Remove it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318181039.17260-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
It's a requirement that for dgfx we place all the paging structures in
device local-memory.
v2: use i915_coherent_map_type()
v3: improve the shared dma-resv object comment
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-4-matthew.auld@intel.com
|
|
We need to generalise our accessor for the page directories and tables from
using the simple kmap_atomic to support local memory, and this setup
must be done on acquisition of the backing storage prior to entering
fence execution contexts. Here we replace the kmap with the object
mapping code that for simple single page shmemfs object will return a
plain kmap, that is then kept for the lifetime of the page directory.
Note that keeping the mapping around is a potential concern here, since
while the vma is pinned the mapping remains there for the PDs
underneath, or at least until the used_count reaches zero, at which
point we can safely destroy the mapping. For 32b this will be even worse
since the address space is more limited, but since this change mostly
impacts full ppGTT platforms, the justification is that for modern
platforms we shouldn't care too much about 32b.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-3-matthew.auld@intel.com
|
|
Determine the possible coherent map type based on object location,
and if target has llc or if user requires an always coherent
mapping.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-2-matthew.auld@intel.com
|
|
Use I915_MAP_WC when default state object is allocated in LMEM.
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-1-matthew.auld@intel.com
|
|
Our code analyzer reported a double free bug.
In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated
via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base
is freed by i915_gem_object_put() with a reference dropped. Then free_pd
calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put()
to put pde->pt.base again.
As pde->pt.base is protected by refcount, so the second put will not free
pde->pt.base actually. But, maybe it is better to remove the first put?
Fixes: 82adf901138cc ("drm/i915/gt: Shrink i915_page_directory's slab bucket")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426124340.4238-1-lyl2019@mail.ustc.edu.cn
|
|
These are the 965g/g45/g33 specific DRB registers. Give them
a suitable suffix so we can add their counterparts for other
platforms.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-4-ville.syrjala@linux.intel.com
|
|
We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them
as such.
Fixes: 1c8242c3a4b2 ("drm/i915: Use unchecked writes for setting up the fences")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-3-ville.syrjala@linux.intel.com
|
|
RAPL provides an on-package power measurements which does not encompass
discrete graphics, so let's avoid using the igfx masurements when testing
dgfx. Later we will abstract the simple librapl interface over hwmon so
that we can verify basic power consumption scenarios.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412090526.30547-3-matthew.auld@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-gt-next
Gen to ver conversions across the driver
The main change is Lucas' series [1], with Ville's GLK fixes [2] and a
cherry-pick of Matt's commit [3] from drm-intel-next as a base to avoid
conflicts.
[1] https://patchwork.freedesktop.org/series/88825/
[2] https://patchwork.freedesktop.org/series/88938/
[3] 70bfb30743d5 ("drm/i915/display: Eliminate IS_GEN9_{BC,LP}")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878s5ebny0.fsf@intel.com
|
|
Since its introduction 2 years ago, we never used the mask to span more
than one gen. Replace gen_mask a single number and start using the new
GRAPHICS_VER().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-7-lucas.demarchi@intel.com
|
|
Start using the new fields graphics_version for the previous gen checks.
Here we rename the "gen" field and replace the comparisons using it to
start using the new GRAPHICS_VER(). Other uses of INTEL_GEN() were left
as is for automatic conversion later.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-6-lucas.demarchi@intel.com
|
|
This is a permanent workaround for TGL,RKL,DG1 and ADLS.
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-5-lucas.demarchi@intel.com
|
|
This WA is needed in all gen12 platforms, moving it to
gen12_ctx_workarounds_init() allow us to remove the duplicated
implementation.
Also allow us to remove the tgl_ctx_workarounds_init() that after the
WA move above was empty.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-4-lucas.demarchi@intel.com
|
|
Wa_22010271021 does not apply only to EHL, but to all gen11 and other
gen12 platforms. Gen12 is already covered in another code path, but we
need to stop checking for EHL when handling gen11.
Bspec: 33450, 52887
v2: Remove "gen11" suffix as it also applies to gen12 platforms
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-3-lucas.demarchi@intel.com
|
|
Follow Bspec 31870 to set recommended tuning values for certain GT
register. These values aren't workarounds per-se, but it's best to
handle them in the same general area of the driver, especially since
there may be real workarounds that update other bits of the same
registers.
At the moment the only value we need to worry about is the
TDS_TIMER setting in FF_MODE2. This setting was previously
described as "Wa_1604555607" on some platforms, but the spec
tells us that we should continue to program this on all current
gen12 platforms, even those that do not have that WA.
Bspec: 31870
v2: Rephrase some comments to make them clearer (Matt)
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-2-lucas.demarchi@intel.com
|
|
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- Add support for FBs requiring a power-of-two stride padding (Imre)
Refactoring:
- Disassociate display version from gen (Matt)
- Refactor legacy DP and HDMI code to separate files (Ville)
- Refactor FB plane code to a separate file (Imre)
- Refactor VBT child device info parsing and usage (Jani)
- Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani)
Fixes:
- DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre)
- HDCP fixes (Anshuman)
- DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit)
- Set HDA link parameters in driver (Kai)
- Fix enabled_planes bitmask (Ville)
- Fix transposed arguments to skl_plane_wm_level() (Ville)
- Stop adding planes to the commit needlessly (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
|
|
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
|
|
An upcoming patch adds a new dst_stride field to the
intel_remapped_plane_info struct, so for clarity rename the current
stride field to src_stride.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-23-imre.deak@intel.com
|
|
Matter of taste. STEP matches the enums.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf2dccd1c9c7fdcf5de08ea10a9265292b45d8c7.1616764798.git.jani.nikula@intel.com
|
|
Add new symbolic names for revision ids, and convert KBL revids to use
them via the new stepping check macros.
This also fixes theoretical out of bounds access to kbl_revids array.
v3: upgrade dbg to warn on unknown revid (José)
v2: Rename stepping->step
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/79b6c48211c6b214165391d350d556bad748f747.1616764798.git.jani.nikula@intel.com
|
|
gt/intel_workarounds.c is decidedly the wrong place for handling
stepping info. Add new intel_step.[ch] for the data, and move the
stepping arrays there. No functional changes.
v2: Rename stepping->step
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f69baf82819a8a35815fca25a520de5c38a7e1b5.1616764798.git.jani.nikula@intel.com
|
|
A new Kconfig option CONFIG_DRM_I915_REQUEST_TIMEOUT is added, defaulting
to 20s, and this timeout is applied to all users contexts using the
previously added watchdog facility.
Result of this is that any user submission will simply fail after this
timeout, either causing a reset (for non-preemptable), or incomplete
results.
This can have an effect that workloads which used to work fine will
suddenly start failing. Even workloads comprised of short batches but in
long dependency chains can be terminated.
And because of lack of agreement on usefulness and safety of fence error
propagation this partial execution can be invisible to userspace even if
it is "listening" to returned fence status.
Another interaction is with hangcheck where care needs to be taken timeout
is not set lower or close to three times the heartbeat interval. Otherwise
a hang in any application can cause complete termination of all
submissions from unrelated clients. Any users modifying the per engine
heartbeat intervals therefore need to be aware of this potential denial of
service to avoid inadvertently enabling it.
Given all this I am personally not convinced the scheme is a good idea.
Intuitively it feels object importers would be better positioned to
enforce the time they are willing to wait for something to complete.
v2:
* Improved commit message and Kconfig text.
* Pull in some helper code from patch which got dropped.
v3:
* Bump timeout to 20s to see if it helps Tigerlake.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324121335.2307063-7-tvrtko.ursulin@linux.intel.com
|
|
Prepares the plumbing for setting request/fence expiration time. All code
is put in place but is never activated due yet missing ability to actually
configure the timer.
Outline of the basic operation:
A timer is started when request is ready for execution. If the request
completes (retires) before the timer fires, timer is cancelled and nothing
further happens.
If the timer fires request is added to a lockless list and worker queued.
Purpose of this is twofold: a) It allows request cancellation from a more
friendly context and b) coalesces multiple expirations into a single event
of consuming the list.
Worker locklessly consumes the list of expired requests and cancels them
all using previous added i915_request_cancel().
Associated timeout value is stored in rq->context.watchdog.timeout_us.
v2:
* Log expiration.
v3:
* Include more information about user timeline in the log message.
v4:
* Remove obsolete comment and fix formatting. (Matt)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324121335.2307063-6-tvrtko.ursulin@linux.intel.com
|
|
With the watchdog cancelling requests asynchronously to preempt-to-busy we
need to relax one assert making it apply only to requests not in error.
v2:
* Check against the correct request!
v3:
* Simplify the check to avoid the question of when to sample the fence
error vs sentinel bit.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324121335.2307063-5-tvrtko.ursulin@linux.intel.com
|
|
Disallow sentinel requests follow previous sentinels to make request
cancellation work better when faced with a chain of requests which have
all been marked as in error.
Because in cases where we end up with a stream of cancelled requests we
want to turn off request coalescing so they each will get individually
skipped by the execlists_schedule_in (which is called per ELSP port, not
per request).
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
[danvet: Fix typo in the commit message that Matthew spotted.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324121335.2307063-4-tvrtko.ursulin@linux.intel.com
|
|
Currently, we cancel outstanding requests within a context when the
context is closed. We may also want to cancel individual requests using
the same graceful preemption mechanism.
v2 (Tvrtko):
* Cancel waiters carefully considering no timeline lock and RCU.
* Fixed selftests.
v3 (Tvrtko):
* Remove error propagation to waiters for now.
v4 (Tvrtko):
* Rebase for extracted i915_request_active_engine. (Matt)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
[danvet: Resolve conflict because intel_engine_flush_scheduler is
still called intel_engine_flush_submission]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324121335.2307063-3-tvrtko.ursulin@linux.intel.com
|
|
We check for idle during debug prints and other debugging actions.
Simplify the flow by not touching execlists state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205174358.28465-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Wait for the GPU to wake up from the semaphore before measuring the
time, so that we coordinate the sampling on both the CPU and GPU for
more accurate comparisons.
v2: Switch to local_irq_disable() as once suggested by Mika.
Reported-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Bruce Chang <yu.bruce.chang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205112912.22978-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Check that we have actually passed the heartbeat interval since last
checking the request before resetting the device.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2780
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204211303.21347-2-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Use the defaults we store on the engine when resetting the heartbeat as
we may have had to adjust it from the config value during initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204211303.21347-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
