| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Aliasing the intel_display_power_domain enum values was required because
of the u64 power domain mask size limit. This makes the dmesg/debugfs
printouts of the domain names somewhat unclear, for instance domain
names for port D are shown on D12+ platforms where the corresponding
port is called TC1. Make this clearer by removing the aliasing which is
possible after a previous patch converting the mask to a bitmap.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-15-imre.deak@intel.com
|
|
Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.
This also allows for removing the aliasing in enum values in a follow-up
patch.
v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com
|
|
Instead of the skip_mask special casing of the ADL-S power well
descriptors, add a power well descriptor list for ADL-S as well reusing
the TGL descriptors, w/o the TC-cold power well. ADL-S doesn't have
TypeC PHYs, so a better way would be having ADL-S specific AUX
descriptors, but I left changing this for a follow-up.
This changes the ordering of the AUX and TC-cold vs. PW_4/5 power wells
on TGL and ADL-S, but this shouldn't make a difference (PW_4/5 don't
depend on the AUX/TC-cold power wells).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-13-imre.deak@intel.com
|
|
Simplify the definition of DG1 power wells by reusing the identical
RKL DDI/AUX descriptors.
This reorders the DG1 DDI/AUX vs. PW4/5 power wells, but this shouldn't
make a difference (it is the order on RKL and the DDI/AUX power wells
don't have a dependency on PW4/5).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-12-imre.deak@intel.com
|
|
Some power wells - like always-on and skl+/icl+ PW_1 - with the same
name, domain list, flags, ops are used by multiple platforms, so allow
platforms to reuse the descriptors of such power wells.
This change also lets the follow up patches to simplify the DG1/RKL
power well definitions, and remove the ADL-S skip_mask special casing.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-11-imre.deak@intel.com
|
|
All the port specific AUX/DDI_IO power wells share the same power well
ops struct and flags, so we can save some space and simplify the
definition of these by listing for all such power wells only the params
specific to them (name, domains, power well register index, id). Move
these params to a new i915_power_well_instance struct and convert the
per-platform power well definitions accordingly.
For all power well instance the name and power domain list params must
be specified, while the register index and id are optional, add the
I915_PW() macro that both simplifies the definitions and ensures that
the required params are set.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-10-imre.deak@intel.com
|
|
To remove the aliasing of the power domain enum values in a follow-up
patch in this patchset (requiring a bigger mask) and allow for defining
additional power domains in the future (at least some upcoming TypeC
changes requires this) convert the u64 i915_power_well_desc::domains
mask to a bitmap.
For simplicity I changed the for_each_power_domain_well() macros to
accept one domain only instead of a mask, as there isn't any current
user passing multiple domains.
v2: Don't add a typedef for the bitmap struct. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-9-imre.deak@intel.com
|
|
The next patch converts the i915_power_well_desc::domain mask from a u64
mask to a bitmap. I didn't find a reasonably simple way to initialize
bitmaps statically, so prepare for the next patch here by converting the
masks to an array of domain enums and initing the masks from these
arrays during module loading.
v2: Clarify list vs. array in the commit message. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-8-imre.deak@intel.com
|
|
Use the shortest descriptive name for all power wells for simplicity and
to use the same name for the same type of power wells on multiple
platforms.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-7-imre.deak@intel.com
|
|
Make all power domain names end with the pipe/port instance for
consistency.
No functional changes.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-6-imre.deak@intel.com
|
|
Save some space by grouping the HSW power well descriptor flags along
with other flags in one bitfield.
This change also lets simplifying the definition of power well
descriptors sharing the same flags in an upcoming patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-5-imre.deak@intel.com
|
|
The DG2 fixed delay duration is always 600usec, so save some space in
the power well descriptors by converting the parameter to a flag. While
at it also use a bitfield for both the always_on and fixed_enable_delay
flag.
This change also lets simplifying the definiton of power wells sharing
the same flags in an upcoming patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-4-imre.deak@intel.com
|
|
Move the list of platform specific power domain -> power well
definitions to intel_display_power_map.c. While at it group the
platforms' power domain macros with the corresponding power well lists
and keep all the power domain lists in the same order (matching the enum
order).
No functional changes.
v2:
- s/intel_display_power_internal.h/intel_display_power_map.h/ (Jani)
- Simplify intel_cleanup_power_wells().
- Don't move intel_display_power_domain_str().
v3:
- Rename intel_init/cleanup_power_wells() to
intel_display_power_map_init/cleanup().
- Add documentation to intel_display_power_map_init/cleanup().
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-3-imre.deak@intel.com
|
|
The for_each_power_well() macros are only used in intel_display_power.c
and intel_display_power_well.c, so unexport them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-2-imre.deak@intel.com
|
|
Move the implementation of platform specific power well hooks to
intel_display_power_well.c, to reduce the clutter in
intel_display_power.c.
The locking of all the power domain/power well state is handled in the
power domain functions in intel_display_power.c using
i915_power_domains::lock. This patch also moves the
chy_phy_powergate_ch/lanes() functions to intel_display_power_well.c
which borrow the same lock to protect the DISPLAY_PHY_CONTROL register
state, which the HW uses both for toggling power wells and power gating
PHY lanes.
No functional change.
v2:
- Clarify in the commit log why CHV functions using the
i915_power_domains::lock were moved, while others locking the power
domain/well state were kept in intel_display_power.c . (Jouni)
- Move forward declaration of chv_phy_powergate_ch/lanes() to
intel_display_power_well.h .
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-1-imre.deak@intel.com
|
|
This workaround fixes screen flickers with FBC.
BSpec: 33450
BSpec: 52890
BSpec: 54369
BSpec: 66624
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419182753.364237-1-jose.souza@intel.com
|
|
Follow the new i9xx DPLL FP register programming sequence
introduced in commit 62d66b218386 ("drm/i915: Fold
i9xx_set_pll_dividers() into i9xx_enable_pll()") in the
i830 "power well" code as well. Just for consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321195006.775-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
intel_psr2_config_valid() fails
If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid()
fails, enable_psr2_sel_fetch will be kept enabled causing problems
in the functions that only checks for it and not for has_psr2.
So here moving the check that do not depend on enable_psr2_sel_fetch
and for the remaning ones jumping to a section that unset
enable_psr2_sel_fetch in case of failure to support PSR2.
Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch")
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com
(cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
After commit 805f04d42a6b ("drm/i915/display/psr: Use continuos full
frame to handle frontbuffer invalidations") was merged we started to
get some drm_WARN_ON(&dev_priv->drm, !(tmp & PSR2_MAN_TRK_CTL_ENABLE))
in tests that are executed in pipe B.
This is probably due psr2_sel_fetch_cff_enabled being left set during
PSR disable in the pipe A, so the PSR2_MAN_TRK_CTL write in
intel_psr2_program_trans_man_trk_ctl() is skipped in pipe B and then
we get the warning when actually enabling PSR after planes programing.
We don't get such warnings when running tests in pipe A because
PSR2_MAN_TRK_CTL is only cleared when enabling PSR2 with hardware
tracking.
Was not able to reproduce this issue but cleaning the PSR state
disable will not harm anything at all.
Fixes: 805f04d42a6b ("drm/i915/display/psr: Use continuos full frame to handle frontbuffer invalidations")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5634
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-2-jose.souza@intel.com
|
|
intel_psr2_config_valid() fails
If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid()
fails, enable_psr2_sel_fetch will be kept enabled causing problems
in the functions that only checks for it and not for has_psr2.
So here moving the check that do not depend on enable_psr2_sel_fetch
and for the remaning ones jumping to a section that unset
enable_psr2_sel_fetch in case of failure to support PSR2.
Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch")
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com
|
|
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
v5: Fixes the regression on older platforms by resetting the VRR
only if HAS_VRR
v6: Remove the checks from driver, add in drm core before
setting VRR prop (Ville)
v7: Move VRR set/reset to set/unset_edid (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 9bc34b4d0f3c ("drm/i915/display/vrr: Reset VRR capable property on a long hpd")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303233222.4698-1-manasi.d.navare@intel.com
(cherry picked from commit d999ad1079f574be06a8f1701cd24a5dc0ada48c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
drm/drm-next has a build fix for the NewVision NV3052C panel
(drivers/gpu/drm/panel/panel-newvision-nv3052c.c), which needs to be
merged back to drm-misc-next, as it was failing to build there.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
|
|
Remove the pointless detour via __intel_fbc_post_update() during
frontbuffer flush.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Now that fbc no longer nukes while a flip is pending we can
remove the last uncore.lock from the i9xx plane code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Don't issue a nuke from frontbuffer flush while a flip is pending.
This avoids the DSPADDR/DSPSURF rmw abuse from the pre-snb nuke
from racing with the DSPADDR/DSPSURF write being performed by
the flip/plane update. The flip itself will already cause the nuke
so a double nuke is redundant.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
If the frontbuffer bits say this fbc instance isn't affected just
skip the whole thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Not sure what the point of this fbc->possible_frontbuffer_bits is.
And especially don't see why it's returning all the bits when
fbc is not even enabled. So let's just get rid of this and only
say we are interested in the plane's frontbuffer bits when fbc
is actually enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
v5: Fixes the regression on older platforms by resetting the VRR
only if HAS_VRR
v6: Remove the checks from driver, add in drm core before
setting VRR prop (Ville)
v7: Move VRR set/reset to set/unset_edid (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 9bc34b4d0f3c ("drm/i915/display/vrr: Reset VRR capable property on a long hpd")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303233222.4698-1-manasi.d.navare@intel.com
|
|
Add support for the DG2 specific render compression with clear color
framebuffer format.
DG2 onwards discrete gfx has support for new flat CCS mapping,
which brings in display feature in to avoid Aux walk for compressed
surface. This support build on top of Flat CCS support added in XEHPSDV.
FLAT CCS surface base address should be 64k aligned,
Compressed displayable surfaces must use tile4 format.
HAS: 1407880786
B.Spec : 7655
B.Spec : 53902
v2: Merge all bits required for the support of functionality into this
patch from the patch adding the corresponding modifier.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-5-imre.deak@intel.com
|
|
Add support for DG2 render and media compression, for the description of
buffer layouts see the previous patch adding the corresponding
frame buffer modifiers.
v2:
Display version fix [Imre]
v3:
Split out modifier addition to separate patch.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-3-imre.deak@intel.com
|
|
Pull in TTM changes needed for DG2 CCS enabling from Ram.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In addition to the fp_timing,dvo_timing,panel_pnp_id tables
there also exists a panel_name table. Unlike the others this
is just one offset+table_size even though there are still 16
actual panel_names in the data block.
The panel_name table made its first appearance somewhere
around VBT version 156-163. The exact version is not known.
But we don't need to know that since we can just check whether
the pointers block has enough room for it or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that we've sufficiently validated the LFP data pointers we
can trust them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make sure the LFP data table pointers sane. Sensible looking
table entries, everything points correctly into the data block,
etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently get_lvds_fp_timing() still returns a pointer to the original
data block rather than our copy. Let's convert the data pointer offsets
to be relative to the data block rather than the whole BDB. With that
we can make get_lvds_fp_timing() return a pointer to the copy.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make a copy of each VBT data block with a guaranteed minimum
size. The extra (if any) will just be left zeroed.
This means we don't have to worry about going out of bounds
when accessing any of the structure members. Otherwise that
could easliy happen if we simply get the version check wrong,
or if the VBT is broken/malicious.
v2: Don't do arithmetic between bdb header and copy
of the LFP data block (Jani)
v3: Make all the copies up front
v4: Only WARN about min_size==0 if we found the block
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406133817.30652-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We have the BDB version cached, use it. We're going to have to
start doing some of the BDB block parsing later, at which point
we may no longer have the VBT around anymore (we free it at the
end of intel_bios_init() when it didn't come via OpRegion).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
When the PHY fails on calibration we were previously skipping the ddi
initialization. However the driver is not really prepared for that,
ultimately leading to a NULL pointer dereference:
[ 75.748348] i915 0000:03:00.0: [drm:intel_modeset_init_nogem [i915]] SNPS PHY A failed to calibrate; output will not be used.
...
[ 75.750336] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled
...
( no DDI A/PHY A )
[ 75.753080] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A
[ 75.753164] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:245:DDI C/PHY C] hw state readout: disabled, pipe A
...
[ 75.754425] i915 0000:03:00.0: [drm] *ERROR* crtc 80: Can't calculate constants, dotclock = 0!
[ 75.765558] i915 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
[ 75.765569] WARNING: CPU: 5 PID: 1759 at drivers/gpu/drm/drm_vblank.c:728 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x347/0x360
...
[ 75.781230] BUG: kernel NULL pointer dereference, address: 000000000000007c
[ 75.788198] #PF: supervisor read access in kernel mode
[ 75.793347] #PF: error_code(0x0000) - not-present page
[ 75.798480] PGD 0 P4D 0
[ 75.801019] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 75.805377] CPU: 5 PID: 1759 Comm: modprobe Tainted: G W 5.18.0-rc1-demarchi+ #199
[ 75.827613] RIP: 0010:icl_aux_power_well_disable+0x3b/0x200 [i915]
[ 75.833890] Code: 83 ec 30 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 48 8b 06 0f b6 70 1c f6 40 20 04 8d 56 fa 0f 45 f2 e8 88 bd ff ff 48 89 ef <8b> 70 7c e8 ed 67 ff ff 48 89 ef 89 c6 e8 73 67 ff ff 84 c0 75 0a
[ 75.852629] RSP: 0018:ffffc90003a7fb30 EFLAGS: 00010246
[ 75.857852] RAX: 0000000000000000 RBX: ffff8881145e8f10 RCX: 0000000000000000
[ 75.864978] RDX: ffff888115220840 RSI: 0000000000000000 RDI: ffff888115220000
[ 75.872106] RBP: ffff888115220000 R08: ffff88888effffe8 R09: 00000000fffdffff
[ 75.879234] R10: ffff88888e200000 R11: ffff88888ed00000 R12: ffff8881145e8f10
[ 75.886363] R13: 0000000000000001 R14: ffff888115223240 R15: 0000000000000000
[ 75.893490] FS: 00007ff6e753a740(0000) GS:ffff88888f680000(0000) knlGS:0000000000000000
[ 75.901573] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 75.907313] CR2: 000000000000007c CR3: 00000001216a6001 CR4: 0000000000770ee0
[ 75.914446] PKRU: 55555554
[ 75.917153] Call Trace:
[ 75.919603] <TASK>
[ 75.921709] intel_power_domains_sanitize_state+0x88/0xb0 [i915]
[ 75.927814] intel_modeset_init_nogem+0x317/0xef0 [i915]
[ 75.933205] i915_driver_probe+0x5f6/0xdf0 [i915]
[ 75.937976] i915_pci_probe+0x51/0x1d0 [i915]
We skip the initialization of PHY A, but later we try to find out what
is the phy for that power well and dereference dig_port, which is NULL.
Failing the PHY calibration could be left as a warning or error, like it
was before commit b4eb76d82a0e ("drm/i915/dg2: Skip output init on PHY
calibration failure"). However that often fails for outputs not being
used, which would make the warning/error appear on systems that have no
visible issues. Anyway, there is still a need to fix those failures,
but that is left for later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220410061537.4187383-1-lucas.demarchi@intel.com
|
|
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Commit 3b6f409547fb ("drm/i915/display/psr: Lock and unlock PSR around
pipe updates") did not took into account async flips with PSR1 and
PSR2 HW tracking, causing PSR lock not be held and causing warnings
when intel_psr2_program_trans_man_trk_ctl() is executed.
So here taking the PSR lock before the earlier return in
intel_pipe_update_start/end().
Cc: Jouni Högander <jouni.hogander@intel.com>
Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: 3b6f409547fb ("drm/i915/display/psr: Lock and unlock PSR around pipe updates")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406210540.493610-1-jose.souza@intel.com
|
|
This change adds the dma_resv_usage enum and allows us to specify why a
dma_resv object is queried for its containing fences.
Additional to that a dma_resv_usage_rw() helper function is added to aid
retrieving the fences for a read or write userspace submission.
This is then deployed to the different query functions of the dma_resv
object and all of their users. When the write paratermer was previously
true we now use DMA_RESV_USAGE_WRITE and DMA_RESV_USAGE_READ otherwise.
v2: add KERNEL/OTHER in separate patch
v3: some kerneldoc suggestions by Daniel
v4: some more kerneldoc suggestions by Daniel, fix missing cases lost in
the rebase pointed out by Bas.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-2-christian.koenig@amd.com
|
|
invalidations
Instead of exit PSR when a frontbuffer invalidation happens, we can
enable the PSR2 selective fetch continuous full frame, that will keep
the panel updated like PSR was disabled but without keeping PSR active.
So as soon as the frontbuffer flush happens we can disable the
continuous full frame and start to do selective fetches much quicker
than the path that would enable PSR, that will wait a few frames
to actually activate PSR.
Also this approach has proven to fix some glitches found in Alderlake-P
when there are a lot of invalidations happening together with page
flips.
Some may ask why it is writing to CURSURFLIVE(), it is because
that is the way that hardware team provided us to poke display to
handle PSR updates, and it is being used since display 9.
v2:
- handling possible race conditions between frontbuffer rendering and
page flips
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405155344.47219-3-jose.souza@intel.com
|
|
Frontbuffer rendering and page flips can race with each other
and this can potentialy cause issues with PSR2 selective fetch.
And because pipe/crtc updates are time sentive we can't grab the
PSR lock after intel_pipe_update_start() and before
intel_pipe_update_end().
So here adding the lock and unlock functions and calls, the
proper PSR2 selective fetch handling will come in a separated patch.
v2:
- fixed new functions documentation
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405155344.47219-2-jose.souza@intel.com
|
|
Following up what was done in commit 804f46885317 ("drm/i915/psr: Set
"SF Partial Frame Enable" also on full update") and also setting
partial frame enable when psr_force_hw_tracking_exit() is called.
Also as PSR2_MAN_TRK_CTL is a double buffered registers do a RMW
is not a good idea so here also setting the man_trk_ctl_enable_bit()
that is required in TGL and only doing a register write.
v2:
- not doing a rmw
v3:
- removing the inline from functions that return PSR2_MAN_TRK_CTL
bits
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405155344.47219-1-jose.souza@intel.com
|
|
The request to aqquire gem resources is failing for DSB in rare
scenario where it is busy and the register programming will be done
through mmio fallback path.
DSB has extra advantage of faster register programming which may
go away through mmio path. Adding wait for gem resource also may
not be right as anyways losing time.
To make the CI execution happy replaced drm_err() to drm_info()
for printing debug info during dsb buffer preparation.
v1: Initial version.
v2: Added print for mmio fallback at out label. [Nirmoy]
v3: Improved debug message. [Nirmoy]
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325161140.11906-1-animesh.manna@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Our YCbCr output is always supposed to be limited range BT.709.
That's what we send with native HDMI. The conn_state->colorspace
stuff is entirely independent of that and is not supposed to alter
the generated output in any way. If we want a way to do that then
we need a new proprty for it.
Make it so that the RGB->YCbCr conversion when performed by the
DPF will match the BT.709 we would transmit with native HDMI.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-12-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
With native HDMI we allow the user to override the mode with
something that may not respect the downstream (sink,dual-mode adapter)
TMDS clock limits. Let's reuse the same logic for DP HDMI DFPs
so that behaviour is more or less uniform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-11-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Currently we only support "4:2:0 also" modes on native HDMI.
Extend that support for DP as well.
With all the HDMI DFP TMDS clock handling sorted out this
is now going to work for both native DP and DP->HDMI
converters. As with native HDMI we first check if RGB
output is possible, and if not we try YCbCr 4:2:0 instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-10-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
