summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display
AgeCommit message (Collapse)AuthorFilesLines
2021-03-04drm/i915: Reject 446-480MHz HDMI clock on GLKVille Syrjälä1-1/+5
commit 7a6c6243b44a439bda4bf099032be35ebcf53406 upstream. The BXT/GLK DPLL can't generate certain frequencies. We already reject the 233-240MHz range on both. But on GLK the DPLL max frequency was bumped from 300MHz to 594MHz, so now we get to also worry about the 446-480MHz range (double the original problem range). Reject any frequency within the higher problematic range as well. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3000 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210203093044.30532-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit 41751b3e5c1ac656a86f8d45a8891115281b729e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-17drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing itImre Deak1-30/+37
commit 2f51312bebb77962a518b4c6de777dd378b6110a upstream. The TypeC FIA can be powered down if the TC-COLD power state is allowed, so block the TC-COLD state when initializing the FIA. Note that this isn't needed on ICL where the FIA is never modular and which has no generic way to block TC-COLD (except for platforms with a legacy TypeC port and on those too only via these legacy ports, not via a DP-alt/TBT port). Cc: <stable@vger.kernel.org> # v5.10+ Cc: José Roberto de Souza <jose.souza@intel.com> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3027 Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208154303.6839-1-imre.deak@intel.com Reviewed-by: Jos� Roberto de Souza <jose.souza@intel.com> (cherry picked from commit f48993e5d26b079e8c80fff002499a213dbdb1b4) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-17drm/i915: Fix overlay frontbuffer trackingVille Syrjälä1-9/+8
commit 5feba0e905c495a217aea9db4ea91093d8fe5dde upstream. We don't have a persistent fb holding a reference to the frontbuffer object, so every time we do the get+put we throw the frontbuffer object immediately away. And so the next time around we get a pristine frontbuffer object with bits==0 even for the old vma. This confuses the frontbuffer tracking code which understandably expects the old frontbuffer to have the overlay's bit set. Fix this by hanging on to the frontbuffer reference until the next flip. And just to make this a bit more clear let's track the frontbuffer explicitly instead of just grabbing it via the old vma. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 553c23bdb4775130f333f07a51b047276bc53f79) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13drm/i915: Skip vswing programming for TBTVille Syrjälä1-0/+6
commit eaf5bfe37db871031232d2bf2535b6ca92afbad8 upstream. In thunderbolt mode the PHY is owned by the thunderbolt controller. We are not supposed to touch it. So skip the vswing programming as well (we already skipped the other steps not applicable to TBT). Touching this stuff could supposedly interfere with the PHY programming done by the thunderbolt controller. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit f8c6b615b921d8a1bcd74870f9105e62b0bceff3) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13drm/i915: Fix ICL MG PHY vswing handlingVille Syrjälä1-4/+3
commit a2a5f5628e5494ca9353f761f7fe783dfa82fb9a upstream. The MH PHY vswing table does have all the entries these days. Get rid of the old hacks in the code which claim otherwise. This hack was totally bogus anyway. The correct way to handle the lack of those two entries would have been to declare our max vswing and pre-emph to both be level 2. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Fixes: 9f7ffa297978 ("drm/i915/tc/icl: Update TC vswing tables") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201207203512.1718-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 5ec346476e795089b7dac8ab9dcee30c8d80ad84) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10drm/i915: Power up combo PHY lanes for for HDMI as wellVille Syrjälä1-0/+2
commit fad9bae9ee5d578afbe6380c82e4715efaddf118 upstream. Currently we only explicitly power up the combo PHY lanes for DP. The spec says we should do it for HDMI as well. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 1e0cb7bef35f0d1aed383bf69a209df218b807c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10drm/i915: Extract intel_ddi_power_up_lanes()Ville Syrjälä1-16/+19
commit 425cbd1fce10d4d68188123404d1a302a6939e0a upstream. Reduce the copypasta by pulling the combo PHY lane power up stuff into a helper. We'll have a third user soon. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 5cdf706fb91a6e4e6af799bb957c4d598e6a067b) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10drm/i915/display: Prevent double YUV range correction on HDR planesAndres Calderon Jaramillo2-55/+12
commit 00f9a08fbc3c703b71842a5425c1eb82053c8a70 upstream. Prevent the ICL HDR plane pipeline from performing YUV color range correction twice when the input is in limited range. This is done by removing the limited-range code from icl_program_input_csc(). Before this patch the following could happen: user space gives us a YUV buffer in limited range; per the pipeline in [1], the plane would first go through a "YUV Range correct" stage that expands the range; the plane would then go through the "Input CSC" stage which would also expand the range because icl_program_input_csc() would use a matrix and an offset that assume limited-range input; this would ultimately cause dark and light colors to appear darker and lighter than they should respectively. This is an issue because if a buffer switches between being scanned out and being composited with the GPU, the user will see a color difference. If this switching happens quickly and frequently, the user will perceive this as a flickering. [1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281 Cc: stable@vger.kernel.org Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com (cherry picked from commit fed387572040e84ead53852a7820e30a30e515d0) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210202084553.30691-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10drm/i915/gem: Drop lru bumping on display unpinningChris Wilson2-7/+4
commit 761c70a52586a9214b29026d384d2c01b73661a8 upstream. Simplify the frontbuffer unpin by removing the lock requirement. The LRU bumping was primarily to protect the GTT from being evicted and from frontbuffers being eagerly shrunk. Now we protect frontbuffers from the shrinker, and we avoid accidentally evicting from the GTT, so the benefit from bumping LRU is no more, and we can save more time by not. Reported-and-tested-by: Matti Hämäläinen <ccr@tnsp.org> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2905 Fixes: c1793ba86a41 ("drm/i915: Add ww locking to pin_to_display_plane, v2.") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk (cherry picked from commit 14ca83eece9565a2d2177291ceb122982dc38420) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10drm/i915: Fix the MST PBN divider calculationImre Deak1-1/+3
commit 882554042d138dbc6fb1a43017d0b9c3b38ee5f5 upstream. Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit) value for MST streams if the link parameters (link rate or lane count) are limited in a way independent of the sink capabilities (reported by DPCD). One example of such a limitation is when a MUX between the sink and source connects only a limited number of lanes to the display and connects the rest of the lanes to other peripherals (USB). Another issue is that atm MST core calculates the divider based on the backwards compatible DPCD (at address 0x0000) vs. the extended capability info (at address 0x2200). This can result in leaving some part of the MST BW unused (For instance in case of the WD19TB dock). Fix the above two issues by calculating the PBN divider value based on the rate and lane count link parameters that the driver uses for all other computation. Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977 Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjala <ville.syrjala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com (cherry picked from commit b59c27cab257cfbff939615a87b72bce83925710) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27drm/i915/hdcp: Get conn while content_type changedAnshuman Gupta1-0/+1
commit 8662e1119a7d1baa1b2001689b2923e9050754bd upstream. Get DRM connector reference count while scheduling a prop work to avoid any possible destroy of DRM connector when it is in DRM_CONNECTOR_REGISTERED state. Fixes: a6597faa2d59 ("drm/i915: Protect workers against disappearing connectors") Cc: Sean Paul <seanpaul@chromium.org> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-3-anshuman.gupta@intel.com (cherry picked from commit b3c6661aad979ec3d4f5675cf3e6a35828607d6a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27drm/i915/hdcp: Update CP property in update_pipeAnshuman Gupta1-0/+8
commit b3c95d0bdb0855b1f28370629e9eebec6bceac17 upstream. When crtc state need_modeset is true it is not necessary it is going to be a real modeset, it can turns to be a fastset instead of modeset. This turns content protection property to be DESIRED and hdcp update_pipe left with property to be in DESIRED state but actual hdcp->value was ENABLED. This issue is caught with DP MST setup, where we have multiple connector in same DP_MST topology. When disabling HDCP on one of DP MST connector leads to set the crtc state need_modeset to true for all other crtc driving the other DP-MST topology connectors. This turns up other DP MST connectors CP property to be DESIRED despite the actual hdcp->value is ENABLED. Above scenario fails the DP MST HDCP IGT test, disabling HDCP on one MST stream should not cause to disable HDCP on another MST stream on same DP MST topology. v2: - Fixed connector->base.registration_state == DRM_CONNECTOR_REGISTERED WARN_ON. v3: - Commit log improvement. [Uma] - Added a comment before scheduling prop_work. [Uma] Fixes: 33f9a623bfc6 ("drm/i915/hdcp: Update CP as per the kernel internal state") Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-2-anshuman.gupta@intel.com (cherry picked from commit d276e16702e2d634094f75f69df3b493f359fe31) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4Ville Syrjälä3-6/+8
commit 1c4995b0a576d24bb7ead991fb037c8b47ab6e32 upstream. Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're actually outputting YCbCr 4:4:4. It would appear some protocol converters blindy consult this bit even when the source is outputting RGB, resulting in a visual mess. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111164111.13302-1-ville.syrjala@linux.intel.com Fixes: 181567aa9f0d ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters") Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 3170a21f7059c4660c469f59bf529f372a57da5f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118154355.24453-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/Ville Syrjälä4-17/+17
commit 0e634efd858e0e9331ea037e1a142e34a446e9e3 upstream. Rename intel_dp_sink_dpms() to intel_dp_set_power() so one doesn't always have to convert from the DPMS enum values to the actual DP D-states. Also when dealing with a branch device this has nothing to do with any sink, so the old name was nonsense anyway. Also adjust the debug message accordingly, and pimp it with the standard encoder id+name thing. Trivial bits done with cocci: @@ expression DP; @@ ( - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF) + intel_dp_set_power(DP, DP_SET_POWER_D3) | - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON) + intel_dp_set_power(DP, DP_SET_POWER_D0) ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19drm/i915/icl: Fix initing the DSI DSC power refcount during HW readoutImre Deak1-4/+0
commit 2af5268180410b874fc06be91a1b2fbb22b1be0c upstream. For an enabled DSC during HW readout the corresponding power reference is taken along the CRTC power domain references in get_crtc_power_domains(). Remove the incorrect get ref from the DSI encoder hook. Fixes: 2b68392e638d ("drm/i915/dsi: add support for DSC") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209153952.3397959-1-imre.deak@intel.com (cherry picked from commit 3a9ec563a4ff770ae647f6ee539810f1866866c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is ↵Hans de Goede1-3/+13
no reset-deassert MIPI-sequence commit 00cb645fd7e29bdd20967cd20fa8f77bcdf422f9 upstream. Commit 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") added an intel_dsi_msleep() helper which skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode; and it moved a bunch of msleep-s over to this new helper. This was based on my reading of the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries. Given that this code has been used on a lot of different devices without issues until now, it seems that my interpretation of the spec here is mostly correct. But now I have encountered one device, an Acer Aspire Switch 10 E SW3-016, where the panel will not light up unless we do actually honor the panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence. What seems to set this model apart is that it is lacking a MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on delay usually happens. Fix the panel not lighting up on this model by using an unconditional msleep(panel_on_delay) instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence. Fixes: 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com (cherry picked from commit 6fdb335f1c9c0845b50625de1624d8445c4c4a07) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19drm/i915/backlight: fix CPU mode backlight takeover on LPTJani Nikula1-4/+5
commit bb83d5fb550bb7db75b29e6342417fda2bbb691c upstream. The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight() functions operate directly on the hardware registers. If inverting the value is needed, using intel_panel_compute_brightness(), it should only be done in the interface between hardware registers and panel->backlight.level. The CPU mode takeover code added in commit 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the hardware register and converts to panel->backlight.level correctly, however the value written back should remain in the hardware register "domain". This hasn't been an issue, because GM45 machines are the only known users of i915.invert_brightness and the brightness invert quirk, and without one of them no conversion is made. It's likely nobody's ever hit the problem. Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com (cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17drm/i915/dp: Track pm_qos per connectorChris Wilson2-2/+9
commit 9397d66212cdf7a21c66523f1583e5d63a609e84 upstream. Since multiple connectors may run intel_dp_aux_xfer conncurrently, a single global pm_qos does not suffice. (One connector may disable the dma-latency boost prematurely while the second is still depending on it.) Instead of a single global pm_qos, track the pm_qos request for each intel_dp. v2: Move the pm_qos setup/teardown to intel_dp_aux_init/fini Fixes: 9ee32fea5fe8 ("drm/i915: irq-drive the dp aux communication") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201230202309.23982-1-chris@chris-wilson.co.uk (cherry picked from commit b3304591f14b437b6bccd8dbff06006c11837031) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-09drm/i915/tgl: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clockImre Deak1-16/+25
commit 0e2497e334de42dbaaee8e325241b5b5b34ede7e upstream. Apply Display WA #22010492432 for combo PHY PLLs too. This should fix a problem where the PLL output frequency is slightly off with the current PLL fractional divider value. I haven't seen an actual case where this causes a problem, but let's follow the spec. It's also needed on some EHL platforms, but for that we also need a way to distinguish the affected EHL SKUs, so I leave that for a follow-up. v2: - Apply the WA at one place when calculating the PLL dividers from the frequency and the frequency from the dividers for all the combo PLL use cases (DP, HDMI, TBT). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201003001846.1271151-6-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11drm/i915/display: Go softly softly on initial modeset failureChris Wilson1-1/+1
Reduce the module/device probe error into a mere debug to hide issues where the initial modeset is failing (after lies told by hw probe) and the system hangs with a livelock in cleaning up the failed commit. Reported-by: H.J. Lu <hjl.tools@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210619 Fixes: b3bf99daaee9 ("drm/i915/display: Defer initial modeset until after GGTT is initialised") Fixes: ccc9e67ab26f ("drm/i915/display: Defer initial modeset until after GGTT is initialised") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201210230741.17140-1-chris@chris-wilson.co.uk
2020-12-08drm/i915/display/dp: Compute the correct slice count for VDSC on DPManasi Navare1-1/+1
This patch fixes the slice count computation algorithm for calculating the slice count based on Peak pixel rate and the max slice width allowed on the DSC engines. We need to ensure slice count > min slice count req as per DP spec based on peak pixel rate and that it is greater than min slice count based on the max slice width advertised by DPCD. So use max of these two. In the prev patch we were using min of these 2 causing it to violate the max slice width limitation causing a blank screen on 8K@60. Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com (cherry picked from commit d371d6ea92ad2a47f42bbcaa786ee5f6069c9c14) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-03drm/i915/display: Defer initial modeset until after GGTT is initialisedChris Wilson1-10/+10
Prior to sanitizing the GGTT, the only operations allowed in intel_display_init_nogem() are those to reserve the preallocated (and active) regions in the GGTT leftover from the BIOS. Trying to allocate a GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset) may then conflict with other preallocated regions that have not yet been protected. Move the initial modesetting from the end of init_nogem to the beginning of init so that any vma pinning (either framebuffers or DSB, for example), is after the GGTT is ready to handle it. This will prevent the DSB object from being destroyed too early: [ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345 [ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12 [ 53.449409] Call Trace: [ 53.449418] dump_stack+0x9a/0xcc [ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449565] print_address_description.constprop.0+0x3e/0x60 [ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449857] kasan_report.cold+0x1f/0x37 [ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] [ 53.450281] ? static_obj+0x69/0x80 [ 53.450289] ? lockdep_init_map_waits+0xa9/0x310 [ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915] [ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915] [ 53.450720] i915_gem_init+0x75/0x2d0 [i915] [ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915] [ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915] [ 53.451006] ? check_chain_key+0x1e7/0x2e0 [ 53.451025] ? __pm_runtime_resume+0x58/0xb0 [ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.451285] ? i915_pci_remove+0x40/0x40 [i915] [ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230 [ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50 [ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130 [ 53.451315] ? preempt_count_sub+0xf/0xb0 [ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50 [ 53.451335] pci_device_probe+0xf9/0x190 [ 53.451350] really_probe+0x17f/0x5b0 [ 53.451365] driver_probe_device+0x13a/0x1c0 [ 53.451376] device_driver_attach+0x82/0x90 [ 53.451386] ? device_driver_attach+0x90/0x90 [ 53.451391] __driver_attach+0xab/0x190 [ 53.451401] ? device_driver_attach+0x90/0x90 [ 53.451407] bus_for_each_dev+0xe4/0x140 [ 53.451414] ? subsys_dev_iter_exit+0x10/0x10 [ 53.451423] ? __list_add_valid+0x2b/0xa0 [ 53.451440] bus_add_driver+0x227/0x2e0 [ 53.451454] driver_register+0xd3/0x150 [ 53.451585] i915_init+0x92/0xac [i915] [ 53.451592] ? 0xffffffffa0a20000 [ 53.451598] do_one_initcall+0xb6/0x3b0 [ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0 [ 53.451634] ? kasan_unpoison_shadow+0x33/0x40 [ 53.451649] do_init_module+0xf8/0x350 [ 53.451662] load_module+0x43de/0x47f0 [ 53.451716] ? module_frob_arch_sections+0x20/0x20 [ 53.451731] ? rw_verify_area+0x5f/0x130 [ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0 [ 53.451785] __do_sys_finit_module+0x10d/0x1a0 [ 53.451792] ? __ia32_sys_init_module+0x40/0x40 [ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0 [ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 53.451835] ? mark_held_locks+0x24/0x90 [ 53.451856] do_syscall_64+0x33/0x80 [ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.451868] RIP: 0033:0x7fde09b4470d [ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48 [ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d [ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f [ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded [ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150 [ 53.451957] Allocated by task 345: [ 53.451995] kasan_save_stack+0x1b/0x40 [ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.452006] kmem_cache_alloc+0x1cd/0x8d0 [ 53.452146] i915_vma_instance+0x126/0xb70 [i915] [ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915] [ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915] [ 53.452588] intel_atomic_commit+0x183/0x690 [i915] [ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915] [ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915] [ 53.452995] i915_driver_probe+0x8af/0x1210 [i915] [ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.453125] pci_device_probe+0xf9/0x190 [ 53.453131] really_probe+0x17f/0x5b0 [ 53.453136] driver_probe_device+0x13a/0x1c0 [ 53.453142] device_driver_attach+0x82/0x90 [ 53.453148] __driver_attach+0xab/0x190 [ 53.453153] bus_for_each_dev+0xe4/0x140 [ 53.453158] bus_add_driver+0x227/0x2e0 [ 53.453164] driver_register+0xd3/0x150 [ 53.453286] i915_init+0x92/0xac [i915] [ 53.453292] do_one_initcall+0xb6/0x3b0 [ 53.453297] do_init_module+0xf8/0x350 [ 53.453302] load_module+0x43de/0x47f0 [ 53.453307] __do_sys_finit_module+0x10d/0x1a0 [ 53.453312] do_syscall_64+0x33/0x80 [ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.453345] Freed by task 82: [ 53.453379] kasan_save_stack+0x1b/0x40 [ 53.453384] kasan_set_track+0x1c/0x30 [ 53.453389] kasan_set_free_info+0x1b/0x30 [ 53.453394] __kasan_slab_free+0x112/0x160 [ 53.453399] kmem_cache_free+0xb2/0x3f0 [ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915] [ 53.453542] process_one_work+0x519/0x9f0 [ 53.453547] worker_thread+0x75/0x5c0 [ 53.453552] kthread+0x1da/0x230 [ 53.453557] ret_from_fork+0x22/0x30 [ 53.453584] The buggy address belongs to the object at ffff88811b1e8040 which belongs to the cache i915_vma of size 968 [ 53.453692] The buggy address is located 48 bytes inside of 968-byte region [ffff88811b1e8040, ffff88811b1e8408) [ 53.453792] The buggy address belongs to the page: [ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8 [ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0 [ 53.453853] flags: 0x8000000000010200(slab|head) [ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340 [ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000 [ 53.453870] page dumped because: kasan: bad access detected [ 53.453895] Memory state around the buggy address: [ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb [ 53.454146] ^ [ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454347] ================================================================== [ 53.454414] Disabling lock debugging due to kernel taint [ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12 [ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915] [ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8 [ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286 [ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f [ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160 [ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000 [ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0 [ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160 [ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000 [ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0 [ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.454700] Call Trace: [ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] Reported-by: Matthew Auld <matthew.auld@intel.com> Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201125193032.29282-1-chris@chris-wilson.co.uk (cherry picked from commit b3bf99daaee96a141536ce5c60a0d6dba6ec1d23) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-03drm/i915/display: return earlier from intel_modeset_init() without displayJani Nikula1-2/+2
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so return earlier from intel_modeset_init() for clarity. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com (cherry picked from commit 71c8415d0daa78ef1295743d0e11ba0214d0a9b9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-19drm/i915: Handle max_bpc==16Ville Syrjälä1-1/+2
EDID can declare the maximum supported bpc up to 16, and apparently there are displays that do so. Currently we assume 12 bpc is tha max. Fix the assumption and toss in a MISSING_CASE() for any other value we don't expect to see. This fixes modesets with a display with EDID max bpc > 12. Previously any modeset would just silently fail on platforms that didn't otherwise limit this via the max_bpc property. In particular we don't add the max_bpc property to HDMI ports on gmch platforms, and thus we would see the raw max_bpc coming from the EDID. I suppose we could already adjust this to also allow 16bpc, but seeing as no current platform supports that there is little point. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 2ca5a7b85b0c2b97ef08afbd7799b022e29f192e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-04drm/i915: Fix encoder lookup during PSR atomic checkImre Deak1-1/+1
The atomic check hooks must look up the encoder to be used with a connector from the connector's atomic state, and not assume that it's the connector's current attached encoder. The latter one can change under the atomic check func, or can be unset yet as in the case of MST connectors. This fixes [ 7.940719] Oops: 0000 [#1] SMP NOPTI [ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu [ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020 [ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper] [ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915] [ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00 [ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 7.990154] RSP: 0018:ffffb864c073fac8 EFLAGS: 00010202 [ 7.990155] RAX: ffff8c5d55ce0000 RBX: ffff8c5d54519000 RCX: 0000000000000000 [ 7.990155] RDX: ffff8c5d55cb30c0 RSI: ffff8c5d89a0c800 RDI: ffff8c5d55fcf800 [ 7.990156] RBP: ffffb864c073fac8 R08: 0000000000000000 R09: ffff8c5d55d9f3a0 [ 7.990156] R10: ffff8c5d55cb30c0 R11: 0000000000000009 R12: ffff8c5d55fcf800 [ 7.990156] R13: ffff8c5d55cb30c0 R14: ffff8c5d56989cc0 R15: ffff8c5d56989cc0 [ 7.990158] FS: 0000000000000000(0000) GS:ffff8c5d8e480000(0000) knlGS:0000000000000000 [ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.052970] CR2: 0000000000000078 CR3: 0000000856500005 CR4: 0000000000760ee0 [ 8.060137] PKRU: 55555554 [ 8.062867] Call Trace: [ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915] [ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915] [ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper] [ 8.083942] intel_atomic_check+0x92/0xc50 [i915] [ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm] [ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm] [ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm] [ 8.104573] drm_atomic_commit+0x18/0x50 [drm] [ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm] [ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm] [ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper] [ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper] [ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915] [ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper] [ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper] [ 8.165506] process_one_work+0x1e8/0x3b0 [ 8.169561] worker_thread+0x4d/0x400 [ 8.173249] kthread+0x104/0x140 [ 8.176515] ? process_one_work+0x3b0/0x3b0 [ 8.180726] ? kthread_park+0x90/0x90 [ 8.184416] ret_from_fork+0x1f/0x40 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486 Reported-by: William Tseng <william.tseng@intel.com> Reported-by: Cooper Chiou <cooper.chiou@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027160928.3665377-1-imre.deak@intel.com (cherry picked from commit 00e5deb5c4f5fe367311465e720e65cfa1178792) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-29drm/i915: Reject 90/270 degree rotated initial fbsVille Syrjälä1-0/+4
We don't currently handle the initial fb readout correctly for 90/270 degree rotated scanout. Reject it. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201020194330.28568-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit a40a8305a732f4ecc2186ac7ca132ba062ed770d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-23Merge tag 'drm-intel-next-fixes-2020-10-22' of ↵Dave Airlie2-11/+28
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Tweak initia DPCD backlight.enabled value (Sean) - Initialize reserved MOCS indices (Ayaz) - Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville) - Support parsing of oversize batches (Chris) - Delay execlists processing for TGL (Chris) - Use the active reference on the vma during error capture (Chris) - Widen CSB pointer (Chris) - Wait for CSB entries on TGL (Chris) - Fix unwind for scratch page allocation (Chris) - Exclude low patches of stolen memory (Chris) - Force VT'd workarounds when running as a guest OS (Chris) - Drop runtime-pm assert from vpgu io accessors (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
2020-10-19drm/i915: Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup ↵Ville Syrjälä1-0/+8
during fbdev init Currently we leave the cache_level of the initial fb obj set to NONE. This means on eLLC machines the first pin_to_display() will try to switch it to WT which requires a vma unbind+bind. If that happens during the fbdev initialization rcu does not seem operational which causes the unbind to get stuck. To most appearances this looks like a dead machine on boot. Avoid the unbind by already marking the object cache_level as WT when creating it. We still do an excplicit ggtt pin which will rewrite the PTEs anyway, so they will match whatever cache level we set. Cc: <stable@vger.kernel.org> # v5.7+ Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-1-chris@chris-wilson.co.uk (cherry picked from commit d46b60a2e8d246f1f0faa38e52f4f5a73858c338) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-19drm/i915/dp: Tweak initial dpcd backlight.enabled valueSean Paul1-11/+20
In commit 79946723092b ("drm/i915: Assume 100% brightness when not in DPCD control mode"), we fixed the brightness level when DPCD control was not active to max brightness. This is as good as we can guess since most backlights go on full when uncontrolled. However in doing so we changed the semantics of the initial 'backlight.enabled' value. At least on Pixelbooks, they were relying on the brightness level in DP_EDP_BACKLIGHT_BRIGHTNESS_MSB to be 0 on boot such that enabled would be false. This causes the device to be enabled when the brightness is set. Without this, brightness control doesn't work. So by changing brightness to max, we also flipped enabled to be true on boot. To fix this, make enabled a function of brightness and backlight control mechanism. Fixes: 79946723092b ("drm/i915: Assume 100% brightness when not in DPCD control mode") Cc: Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Kevin Chowski <chowski@chromium.org>> Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918002845.32766-1-sean@poorly.run (cherry picked from commit 4ade8f31c25bef7ce7ed4d7cbac17df7c4bad850) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-19Merge tag 'drm-intel-next-fixes-2020-10-15' of ↵Dave Airlie2-13/+6
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Set all unused color plane offsets to ~0xfff again (Ville) - Fix TGL DKL PHY DP vswing handling (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201015181453.GA2905280@intel.com
2020-10-12drm/i915: Set all unused color plane offsets to ~0xfff againVille Syrjälä1-12/+5
When the number of potential color planes grew to 4 we stopped setting all unused color plane offsets to ~0xfff. The code still tries to do this, but actually does nothing since the loop limits are bogus. skl_check_main_surface() actually depends on this ~0xfff behaviour as it will make sure to move the main surface offset below the aux surface offset because the hardware AUX_DIST must be a non-negative value [1], and for simplicity it doesn't bother checking if the AUX plane is actually needed or not. So currently it may end up shuffling the main surface around based on some stale leftover AUX offset. The skl+ plane code also just blindly calculates the AUX_DIST whether or not the AUX plane is actually needed by the hw or not, and that too will now potentially use some stale AUX surface offset in the calculation. Would seem nicer to guarantee a consistent non-negative AUX_DIST always. So bring back the original ~0xfff offset behaviour for unused color planes. Though it doesn't seem super likely that this inconsistency would cause any real issues. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Fixes: 2dfbf9d2873a ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201008101608.8652-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 79148ce4b25d418327feca8abb2f7392d49f5259) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-12drm/i915: Fix TGL DKL PHY DP vswing handlingVille Syrjälä1-1/+1
The HDMI vs. not-HDMI check got inverted whem the bogus encoder->type checks were eliminated. So now we're using 0 as the link rate on DP and potentially non-zero on HDMI, which is exactly the opposite of what we want. The original bogus check actually worked more correctly by accident since if would always evaluate to true. Due to this we now always use the RBR/HBR1 vswing table and never ever the HBR2+ vswing table. That is probably not a good way to get a high quality signal at HBR2+ rates. Fix the check so we pick the right table. Cc: stable@vger.kernel.org Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Fixes: 94641eb6c696 ("drm/i915/display: Fix the encoder type check") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200930223642.28565-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> (cherry picked from commit 945b18fb4803b01e822ade6aef6cc0b6e4bd644f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-12Merge tag 'drm-intel-next-fixes-2020-10-02' of ↵Dave Airlie1-6/+9
git://anongit.freedesktop.org/drm/drm-intel into drm-next Propagated from drm-intel-next-queued: - Fix CRTC state checker (Ville) Propated from drm-intel-gt-next: - Avoid implicit vmpa for highmem on 32b (Chris) - Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris) - Clear the buffer pool age before use. (Chris) - Fix error code (Dan) - Break up error capture compression loops (Chris) - Fix uninitialized variable in context_create_request (Maarten) - Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt) - Serialize debugfs i915_gem_objects with ctx->mutex (Chris) - Fix a rebase mistake caused during drm-intel-gt-next creation (Chris) - Hold request reference for canceling an active context (Chris) - Heartbeats fixes (Chris) - Use usigned during batch copies (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201002182610.GA2204465@intel.com
2020-09-29Merge tag 'drm-msm-next-2020-09-27' of ↵Dave Airlie1-1/+1
https://gitlab.freedesktop.org/drm/msm into drm-next * DSI support for sm8150/sm8250 * Support for per-process GPU pagetables (finally!) for a6xx. There are still some iommu/arm-smmu changes required to enable, without which it will fallback to the current single pgtable state. The first part (ie. what doesn't depend on drm side patches) is queued up for v5.10[1]. * DisplayPort support. Userspace DP compliance tool support is already merged in IGT[2] * The usual assortment of smaller fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
2020-09-29drm/i915: Fix state checker hw.active/hw.enable readoutVille Syrjälä1-6/+9
Previously intel_dump_pipe_config() used to dump the full crtc state whether or not the crtc was logically enabled or not. As that meant occasionally dumping confusing stale garbage I changed it to check whether the crtc is logically enabled or not. However I did not realize that the state checker readout code does not populate crtc_state.hw.{active,enabled}. Hence the state checker dump would only give us a full dump of the sw state but not the hw state. Fix that by populating those bits of the hw state as well. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Fixes: 10d75f5428fd ("drm/i915: Fix plane state dumps") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com (cherry picked from commit 504c7bd85c6f9b14b6c7f03cb5885c0818e805ad) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-23Merge tag 'drm-misc-next-2020-09-21' of ↵Dave Airlie1-6/+0
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
2020-09-17drm/i915: Nuke force_min_cdclk_changedVille Syrjälä4-9/+6
Since we now have proper old and new cdclk state we no longer need to keep this flag to indicate that the force min cdclk has changed. Instead just check if the old vs. new value are different. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-4-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2020-09-17drm/i915: Remove the old global state stuffVille Syrjälä4-72/+0
With the dbuf code mostly converted over to the new global state handling we can remove the leftovers of the old global state stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200902122141.15181-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2020-09-17drm/i915: Do YCbCr 444->420 conversion via DP protocol convertersVille Syrjälä4-25/+109
For platforms that can't do native 4:2:0 outout we may still be able to do it by getting the DP->HDMI protocol converter to perform the 4:4:4->4:2:0 downsamling for us. In this case we have to configure our hardware to output YCbCr 4:4:4, which we've already hooked up so all we need to do is flip the switch. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-19-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: DP->HDMI TMDS clock limits vs. deep colorVille Syrjälä3-27/+88
Account for the TMDS clock limits declared by the DFP when determining what color depth we're going to use. v2: Drop the reference to DP++ dongle since it's not handled here Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-17-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Extract intel_hdmi_has_audio()Ville Syrjälä1-9/+19
Pull the "do we want to enable audio?" computation into a small helper to make intel_hdmi_compute_config() less messy. Will make it easier to add more checks for this later (eg. we should actually be checking at the hblank is long enough for audio transmission). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-16-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Handle downstream facing ports w/o EDIDVille Syrjälä1-1/+14
Use drm_dp_downstream_mode() to get a suitable mode for downstream facing ports which don't have an EDID. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-15-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Configure DP 1.3+ protocol converted HDMI modeVille Syrjälä3-0/+25
DP 1.3 adds some extra control knobs for DP->HDMI protocol conversion. Let's use that to configure the "HDMI mode" (ie. infoframes vs. not) based on the capabilities of the sink. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-13-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Deal with TMDS DFP clock limitsVille Syrjälä2-3/+34
Use the new helpers to extract the TMDS clock limits from the downstream facing port and check them in .mode_valid(). TODO: we should check these in .compute_config() too to eg. determine if we can do deep color on the HDMI side or not Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-12-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Reworkd DP DFP clock handlingVille Syrjälä2-28/+28
Move the downstream facing port dotclock check into a new function (intel_dp_mode_valid_downstream()) so that we have a nice future place where we can collect other related checks. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-10-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Redo drm_dp_downstream_max_clock() as drm_dp_downstream_max_dotclock()Ville Syrjälä1-2/+2
We want to differentiate between the DFP dotclock and TMDS clock limits. Let's convert the current thing to just give us the dotclock limit. v2: Use Returns: for kdoc (Lyude) Fix up nouveau code too Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-9-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Pimp drm_dp_downstream_max_bpc()Ville Syrjälä2-2/+3
Deal with more cases in drm_dp_downstream_max_bpc(): - DPCD 1.0 -> assume 8bpc for non-DP - DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything - DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap - anything else -> assume 8bpc v2: Use Returns: for kdoc (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Reworkd DFP max bpc handlingVille Syrjälä2-6/+21
Stash the downstream facing port max bpc away during intel_dp_set_edid(). We'll soon need the EDID in there so we can't figure this out so easily during .compute_config() anymore. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-6-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915/lspcon: Do not send infoframes to non-HDMI sinksVille Syrjälä3-7/+11
Non-HDMI sinks shouldn't be sent infoframes. Check for that when using LSPCON. FIXME: How do we turn off infoframes once enabled? Do we even have to? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-3-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-16drm/i915/pll: Centralize PLL_ENABLE register lookupAnusha Srivatsa1-17/+18
We currenty check for platform at multiple parts in the driver to grab the correct PLL. Let us begin to centralize it through a helper function. v2: s/intel_get_pll_enable_reg()/intel_combo_pll_enable_reg() (Ville) v3: Clean up combo_pll_disable() (Rodrigo) v4: s/dev_priv/i915 (Jani) Move static and return type to the same line( Ville, Jani) Suggested-by: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200914175703.15024-1-anusha.srivatsa@intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 08:24:20 +0300