| Age | Commit message (Expand) | Author | Files | Lines |
|---|
| 2022-05-27 | drm/i915/bios: Split VBT data into per-panel vs. global parts | Ville Syrjälä | 1 | -0/+1 |
| 2022-05-27 | drm/i915: Extract intel_edp_fixup_vbt_bpp() | Ville Syrjälä | 1 | -0/+1 |
| 2022-02-02 | drm/i915: Only include i915_reg.h from .c files | Matt Roper | 1 | -2/+0 |
| 2021-12-01 | drm/i915/dp: Perform 30ms delay after source OUI write | Lyude Paul | 1 | -0/+2 |
| 2021-09-30 | drm/i915: Enable TPS3/4 on all platforms that support them | Ville Syrjälä | 1 | -2/+2 |
| 2021-09-23 | drm/i915/display: Only keep PSR enabled if there is active planes | José Roberto de Souza | 1 | -1/+1 |
| 2021-09-20 | drm/i915/dp: add helper for checking for UHBR link rate | Jani Nikula | 1 | -0/+1 |
| 2021-08-30 | drm/i915/display: Move DRRS code its own file | José Roberto de Souza | 1 | -11/+0 |
| 2021-08-24 | drm/i915/dp: add max data rate calculation for UHBR rates | Jani Nikula | 1 | -1/+1 |
| 2021-08-24 | drm/i915/dp: use actual link rate values in struct link_config_limits | Jani Nikula | 1 | -1/+1 |
| 2021-04-28 | drm/i915/hdcp: add intel_dp_hdcp.h and rename init accordingly | Jani Nikula | 1 | -3/+0 |
| 2021-03-19 | drm/i915: Introduce g4x_dp.c | Ville Syrjälä | 1 | -6/+0 |
| 2021-03-19 | drm/i915: Split intel_ddi_encoder_reset() from intel_dp_encoder_reset() | Ville Syrjälä | 1 | -1/+0 |
| 2021-03-19 | drm/i915: Relocate intel_dp_program_link_training_pattern() | Ville Syrjälä | 1 | -4/+0 |
| 2021-01-21 | drm/i915/dp: split out aux functionality to intel_dp_aux.c | Jani Nikula | 1 | -1/+0 |
| 2021-01-19 | drm/i915: Fix the PHY compliance test vs. hotplug mishap | Ville Syrjälä | 1 | -0/+1 |
| 2021-01-14 | drm/i915/pps: abstract panel power sequencer from intel_dp.c | Jani Nikula | 1 | -4/+1 |
| 2021-01-13 | drm/i915/dp: Move intel_dp_set_signal_levels() to intel_dp_link_training.c | Imre Deak | 1 | -3/+0 |
| 2020-12-22 | drm/i915/display: Let PCON convert from RGB to YCbCr if it can | Ankit Nautiyal | 1 | -1/+2 |
| 2020-12-22 | drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding | Ankit Nautiyal | 1 | -0/+2 |
| 2020-12-22 | drm/i915: Add support for starting FRL training for HDMI2.1 via PCON | Ankit Nautiyal | 1 | -0/+2 |
| 2020-11-18 | drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3. | Maarten Lankhorst | 1 | -0/+1 |
| 2020-10-20 | drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/ | Ville Syrjälä | 1 | -1/+1 |
| 2020-10-12 | drm/i915: Switch to LTTPR non-transparent mode link training | Imre Deak | 1 | -2/+0 |
| 2020-10-12 | drm/i915: Simplify the link training functions | Imre Deak | 1 | -2/+0 |
| 2020-10-09 | drm/i915: Wait for eDP panel power cycle delay on reboot on all platforms | Ville Syrjälä | 1 | -0/+1 |
| 2020-10-06 | drm/i915: Add an encoder hook to sanitize its state during init/resume | Imre Deak | 1 | -0/+2 |
| 2020-10-06 | drm/i915: Move the initial fastset commit check to encoder hooks | Imre Deak | 1 | -0/+3 |
| 2020-10-01 | drm/i915: Plumb crtc_state to link training | Ville Syrjälä | 1 | -4/+6 |
| 2020-10-01 | drm/i915: Make intel_dp_process_phy_request() static | Ville Syrjälä | 1 | -1/+0 |
| 2020-09-24 | drm/i915: Decouple intel_dp_{min,output}_bpp() from crtc_state | Ville Syrjälä | 1 | -1/+2 |
| 2020-09-17 | drm/i915: Configure DP 1.3+ protocol converted HDMI mode | Ville Syrjälä | 1 | -0/+1 |
| 2020-09-12 | Merge drm/drm-next into drm-intel-next-queued | Rodrigo Vivi | 1 | -1/+0 |
| 2020-09-01 | drm/i915: Factor out HDCP shim functions from dp for use by dp_mst | Sean Paul | 1 | -0/+3 |
| 2020-09-01 | drm/i915: Use ddi_update_pipe in intel_dp_mst | Sean Paul | 1 | -0/+6 |
| 2020-09-01 | drm/i915/dp: Extract drm_dp_read_dpcd_caps() | Lyude Paul | 1 | -1/+0 |
| 2020-08-27 | drm/i915/display: Disable DRRS when needed in fastsets | José Roberto de Souza | 1 | -0/+2 |
| 2020-07-02 | drm/i915/display: prefer dig_port to reference intel_digital_port | Lucas De Marchi | 1 | -2/+2 |
| 2020-06-03 | drm/i915: Add {preemph,voltage}_max() vfuncs | Ville Syrjälä | 1 | -4/+0 |
| 2020-05-14 | drm/i915/dp: Add compute routine for DP PSR VSC SDP | Gwan-gyeong Mun | 1 | -0/+8 |
| 2020-05-14 | drm/i915: Program DP SDPs with computed configs | Gwan-gyeong Mun | 1 | -6/+0 |
| 2020-05-14 | drm/i915/dp: Read out DP SDPs | Gwan-gyeong Mun | 1 | -0/+3 |
| 2020-04-16 | Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/... | Joonas Lahtinen | 1 | -0/+1 |
| 2020-04-08 | drm/i915/dp: Program vswing, pre-emphasis, test-pattern | Animesh Manna | 1 | -0/+1 |
| 2020-03-20 | drm/i915/dp: Add writing of DP SDPs | Gwan-gyeong Mun | 1 | -0/+3 |
| 2020-02-27 | drm/i915: significantly reduce the use of <drm/i915_drm.h> | Jani Nikula | 1 | -2/+0 |
| 2019-10-15 | drm/i915/dp: Program an Infoframe SDP Header and DB for HDR Static Metadata | Gwan-gyeong Mun | 1 | -0/+3 |
| 2019-10-15 | drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA | Gwan-gyeong Mun | 1 | -0/+2 |
| 2019-10-15 | drm/i915/dp: Extend program of VSC Header and DB for Colorimetry Format | Gwan-gyeong Mun | 1 | -0/+3 |
| 2019-09-25 | drm/i915/dp: Fix dsc bpp calculations, v5. | Maarten Lankhorst | 1 | -4/+2 |
