summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_audio.c
AgeCommit message (Collapse)AuthorFilesLines
2023-04-13drm/i915: Flag purely internal commits to not clear crtc_state->inheritedVille Syrjälä1-0/+1
If we have to force the hardware to go through a full modeset due to eg. cdclk reprogramming, we need to preserve crtc_state->inherited for all crtcs that have not otherwise gone through the whole compute_config() stuff after connectors have been detected. Otherwise eg. cdclk induced modeset glk_force_audio_cdclk() will clear the inherited flag, and thus the first real commit coming from userspace later on will not be forced through the full .compute_config() path and so eg. audio state may not get properly recomputed. But instead of adding all kinds of ad-hoc crtc_state->inherited preservation hacks all over, let's change things so that we only clear it for the crtcs directly included in userspace/client initiated commits. Should be far less fragile since now we just need to remember to flag the internal commits, and not worry about where new crtcs might get pulled in. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5260 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230328122357.1697-1-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-03-20drm/i915/audio: update audio keepalive clock valuesClint Taylor1-5/+1
BSPEC has updated the cdclk audio keepalives AUD_TS_CDCLK_M value to 60 for all supported platforms and refclks. BSPEC: 54034 BSPEC: 55409 BSPEC: 65243 Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316234654.3797572-1-clinton.a.taylor@intel.com
2023-02-23drm/i915/audio: Track audio state per-transcoderVille Syrjälä1-44/+42
The audio logic lives in the transcoder rather than the pipe, so start tracking it like that. This is only really important for bigjoiner cases where tracking by pipe doesn't work at all since intel_audio_codec_{enable,disable}() won't even be called for the slave pipe. This means the state checker won't find the ELD for the slave pipe and gets upset. The PD->has_audio readout does currently work since that gets read out from the same transcoder for both pipes. For other cases this doesn't actually matter since it's only the normal pipe transcoders that are audio capable, whereas the more special transcoders (EDP/DSI) are not. v2: Fix kernel docs Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230222151454.24888-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8222
2023-01-25drm/i915/audio: Clean up the PCH type checksVille Syrjälä1-10/+9
Use explicit PCH type checks to make it more clear which platforms use which codepaths. Also reorder the branches in ibx_audio_regs_init() a bit to be more in chronological order. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-14-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: s/ilk/ibx/Ville Syrjälä1-14/+14
Rename the ilk stuff to ibx, as the audio logic lives in the PCH. The only exception are VLV/CHV but their audio hardware was stolen from ibx so the name still fits. Also most of the register defines also use the IBX namespace. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-13-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: Hardware ELD readoutVille Syrjälä1-0/+56
Read out the ELD from the hardware buffer, or from our stashed copy for the audio component, so that we can hook up the state checker to validate it. v2: Deal with the platforms using acomp Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-7-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: Don't enable audio with bogus ELDVille Syrjälä1-1/+3
Currently we just print a debug message if the ELD is bogus. Maybe we should just not enable audio at all in that case? Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-6-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: Precompute the ELDVille Syrjälä1-19/+31
Stash the ELD into the crtc_state and precompute it. This gets rid of the ugly ELD mutation during intel_audio_codec_enable(), and opens the door for the state checker. v2: Make another copy for the acomp hooks (Chaitanya) Split out the bogus ELD handling change (Jani) Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-5-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: Introduce a struct for the acomp audio stateVille Syrjälä1-48/+58
Currently we're spreading the stashed state for use of the audio component hooks all over the place. Start collecting it up into a single spot. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-4-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: Don't program the hardware ELD buffer on hsw+Ville Syrjälä1-33/+4
Since we use the audio component to transfer the ELD to the audio driver on hsw+ platforms there is no point in even programming the hardware ELD buffer. Stop doing so. The one slight caveat here is that this is not strictly legal according to the HDA spec. PD=1;ELD=0 is only documented as an intermediate state during modeset. But if there is no hardware that depends on that then I guess we're fine. Or we could perhaps set ELD=1 without actually programming the buffer? Note that the bspec sequence of PD=0;ELD=0 -> PD=1;ELD=0 -> PD=1;ELD=1 is also not strictly correct according to the HDA spec, as the only documented transition from PD=0;ELD=0 is straight to PD=1;ELD=1. Additionally on hsw/bdw the hardware buffer is tied in with the dedicated display HDA controller's power state, so currently we mostly fail at proramming the buffer anyway. When the HDA side is not sufficiently powered up the ELD address bits get stuck and the ELD data register accesses go nowhere. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> References: https://lore.kernel.org/intel-gfx/20221012104936.30911-1-ville.syrjala@linux.intel.com/ Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-3-ville.syrjala@linux.intel.com
2023-01-25drm/i915/audio: Don't program the hardware ELD buffer on ilk+Ville Syrjälä1-35/+4
Since we use the audio component to transfer the ELD to the audio driver on ilk+ platforms there is no point in even programming the hardware ELD buffer. Stop doing so. The one slight caveat here is that this is not strictly legal according to the HDA spec. PD=1;ELD=0 is only documented as an intermediate state during modeset. But if there is no hardware that depends on that then I guess we're fine. Or we could perhaps set ELD=1 without actually programming the buffer? Note that the bspec sequence of PD=0;ELD=0 -> PD=1;ELD=0 -> PD=1;ELD=1 is also not strictly correct according to the HDA spec, as the only documented transition from PD=0;ELD=0 is straight to PD=1;ELD=1. But that is not even possible on these platforms as the bits live in different registers. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-2-ville.syrjala@linux.intel.com
2022-11-22drm/i915: Enable SDP split for DP2.0Vinod Govindapillai1-0/+11
Enable the SDP split configuration for DP2.0. v2: Move the register handling out of compute config function (JaniN) v3: Patch styling and register access based on platform support (JaniN) v4: Rebased v5: Use unconditional clear bit in intel_de_rmw (Jani Nikula) Bspec: 67768 Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221121150718.1117628-1-vinod.govindapillai@intel.com
2022-11-17drm/i915/audio: Realign some function argumentsVille Syrjälä1-6/+6
Fix up some function argument alignment fails. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108151839.31567-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-17drm/i915/audio: Unify get_saved_enc()Ville Syrjälä1-9/+7
Make the two branches of get_saved_enc() look alike. Currently they look different even though they do exactly the same thing apart from == vs. != for the MST comparison. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108151839.31567-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-27drm/i915/audio: Do the vblank waitsVille Syrjälä1-13/+18
The spec tells us to do a bunch of vblank waits in the audio enable/disable sequences. Make it so. The FIXMEs are nonsense since we do the audio disable very early and enable very late, so vblank interrupts are in fact enabled when we do this. TODO not sure we actually want these since we don't even rely on the hw ELD buffer, and these might be there just to give the audio side a bit of time to respond to the unsol events. OTOH they might be really needed for some other reason. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-15-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+Ville Syrjälä1-5/+11
On the older platforms the audio presence detect bit is in the port register, so it gets written outside audio codec hooks and is this separate from the ELD valid toggling. Split the operations into two steps on hsw+ to be more consistent with both the other platforms and the spec. Also according to the spec we might need some vblank waits between the two which definitely needs them done separately. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-14-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Use intel_de_rmw() for most audio registersVille Syrjälä1-81/+57
The audio code does a lot of RMW accesses. Utilize intel_de_rmw() to make that a bit less tedious. There are still some hand rolled RMW left, but those have a lot of code in between the read and write to calculate the new value, so would need some refactoring first. v2: Add parens around the ?: to satisfy the robot Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-13-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Use u32* for ELDVille Syrjälä1-12/+9
Make the eld pointer u32* so we don't have to do super ugly casting in the code itself. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-12-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Make sure we write the whole ELD bufferVille Syrjälä1-9/+25
Currently we only write as many dwords into the hardware ELD buffers as drm_eld_size() tells us. That could mean the remainder of the hardware buffer is left with whatever stale garbage it had before, which doesn't seem entirely great. Let's zero out the remainder of the buffer in case the provided ELD doesn't fill it fully. We can also sanity check out idea of the hardware ELD buffer's size by making sure the address wrapped back to zero once we wrote the entire buffer. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-11-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Read ELD buffer size from hardwareVille Syrjälä1-7/+45
We currently read the ELD buffer size from hardware on g4x, but on ilk+ we just hardcode it to 84 bytes. Let's unify this and just do the hardware readout on all platforms, in case the size changes in the future or something. TODO: should perhaps do the readout during driver init and stash the results somewhere so that we could check that the connector's ELD actually fits and not even try to enable audio in that case... v2: Document the size is in dwords (Jani) Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-10-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Nuke intel_eld_uptodate()Ville Syrjälä1-33/+0
No idea why we do this ELD comparions on g4x before loading the new ELD. Seems entirely pointless so just get rid of it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-9-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Protect singleton register with a lockVille Syrjälä1-0/+7
On the "ilk" platforms AUD_CNTL_ST2 is a singleton. Protect it with the audio mutex in case we ever want to do parallel RMW access to it. Currently that should not happen since we only do audio enable/disable from full modesets, and those are fully serialized. But we probably want to think about toggling audio on/off from fastsets too. The hsw codepaths already have the same locking. g4x should not need it since it can only do audio to a single port at a time, which means it's actually broken in more ways than this atm. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-8-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Unify register bit namingVille Syrjälä1-5/+5
Rename a few g4x bits to match the ibx+ bits. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-7-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Use REG_BIT() & co.Ville Syrjälä1-9/+6
Switch the audio registers to REG_BIT() & co. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-6-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Extract struct ilk_audio_regsVille Syrjälä1-42/+43
The "ilk" audio codec codepaths have some duplicated code to figure out the correct registers to use on each platform. Extrat that into a single place. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-5-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Remove CL/BLC audio stuffVille Syrjälä1-18/+5
We don't use the audio code on crestline (CL) since it doesn't support native HDMI output, and SDVO has it's own way of doing audio. And Bearlake-C (BLC) doesn't even exist in the real world, so no point it trying to deal with it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-4-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Nuke leftover ROUNDING_FACTORVille Syrjälä1-2/+0
Remove some leftovers I missed in commit 2dd43144e824 ("drm/i915: Streamline the artihmetic") Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-3-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: s/dev_priv/i915/Ville Syrjälä1-196/+195
Rename the 'dev_priv' variables to 'i915' in the audio code to match modern style conventions. v2: Drop some needless braces in intel_audio_hooks_init() Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-2-ville.syrjala@linux.intel.com
2022-08-31drm/i915: move and group cdclk under display.cdclkJani Nikula1-3/+3
Move display cdclk related members under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7df23655be5dc70fb1a2b43ce41e1682e40395d8.1661779055.git.jani.nikula@intel.com
2022-08-29drm/i915: move and split audio under display.audio and display.funcsJani Nikula1-48/+48
Move display audio related members under drm_i915_private display sub-struct. Split audio funcs to display.funcs to follow the same pattern as all the other display functions. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/51c0b966963a8b47efe3a431e0ce106bdd5269c5.1661346845.git.jani.nikula@intel.com
2022-06-03drm/i915/regs: split out intel audio register definitionsJani Nikula1-0/+1
Split out audio registers to a header of its own to reduce the size of i915_reg.h. TODO: Remove direct audio register access from intel_ddi.c. However, unification of audio get config is cumbersome due to the audio enable bit being in the DP or HDMI registers on older platforms. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220602094542.1386151-1-jani.nikula@intel.com
2022-05-13drm/i915/audio: fix audio code enable/disable pipe loggingJani Nikula1-2/+2
Need to use pipe_name(pipe) instead of pipe directly. Fixes: 1f31e35f2e88 ("drm/i915/audio: unify audio codec enable/disable debug logging") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com
2022-03-30drm/i915/audio: move has_audio checks to within codec enable/disableJani Nikula1-0/+6
Reduce duplication. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220330094109.4164326-2-jani.nikula@intel.com
2022-03-30drm/i915/audio: unify audio codec enable/disable debug loggingJani Nikula1-29/+10
The audio codec enable/disable debug logging is spread around in callers and the platform specific hooks. Put them all together in one place on both the enable and disable paths. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220330094109.4164326-1-jani.nikula@intel.com
2021-12-09drm/i915: s/intel_get_first_crtc/intel_first_crtc/Ville Syrjälä1-1/+1
Since we got rid of the "_get_" from intel_get_crtc_for_pipe() let's do the same for intel_get_first_crtc() for consistency. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-12-09drm/i915/trace: split out display trace to a separate fileJani Nikula1-0/+1
Add display/intel_display_trace.[ch] for defining display tracepoints. The main goal is to reduce cross-includes between gem and display. It would be possible split up tracing even further, but that would lead to more boilerplate. We end up having to include intel_crtc.h in a few places because it was pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and that's no longer the case. There should be no changes to tracepoints. v3: - Rebase v2: - Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris) - Remove useless comments (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com
2021-11-05drm/i915/audio: rename intel_init_audio_hooks to intel_audio_hooks_initJani Nikula1-2/+2
Follow the filename based prefix naming. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211104161858.21786-6-jani.nikula@intel.com
2021-11-05drm/i915/audio: move intel_audio_funcs internal to intel_audio.cJani Nikula1-0/+9
It's all internal to intel_audio.c. Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211104161858.21786-4-jani.nikula@intel.com
2021-11-05drm/i915/audio: name the audio sub-struct in drm_i915_privateJani Nikula1-45/+45
Add name to the audio sub-struct in drm_i915_private, and remove the tautologies and other inconsistencies in the member names. v2: Call the mutex member mutex, not lock. (Ville) Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211104161858.21786-2-jani.nikula@intel.com
2021-11-02drm/i915/display: program audio CDCLK-TS for keepalivesKai Vehmanen1-0/+37
XE_LPD display adds support for display audio codec keepalive feature. This feature works also when display codec is in D3 state and the audio link is off (BCLK off). To enable this functionality, display driver must update the AUD_TS_CDCLK_M/N registers whenever CDCLK is changed. Actual timestamps are generated only when the audio codec driver specifically enables the KeepAlive (KAE) feature. This patch adds new hooks to intel_set_cdclk() in order to inform display audio driver when CDCLK change is started and when it is complete. Bspec: 53679 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021105915.4128635-1-kai.vehmanen@linux.intel.com
2021-09-29drm/i915: constify the audio function vtableDave Airlie1-16/+27
Move the functions into read-only tables. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5a481307a5daab40a506c3b9a64b0b37e01a1a41.1632869550.git.jani.nikula@intel.com
2021-09-29drm/i915: split audio functions from display vtableDave Airlie1-12/+12
These are only used internally in the audio code Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d12257cc7685a9b52618f7da444ba1fc8848b4db.1632869550.git.jani.nikula@intel.com
2021-09-27drm/i915/audio: Use BIOS provided value for RKL HDA linkKai-Heng Feng1-2/+3
Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") makes HDMI audio on Lenovo P350 disappear. So in addition to TGL, extend the logic to RKL to use BIOS provided value to fix the regression. Fixes: 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com
2021-08-02drm/i915/dg1: Adjust the AUDIO power domainAnshuman Gupta1-2/+2
DG1 and XE_PLD platforms has Audio MMIO/VERBS lies in PG0 power well. Adjusting the power domain accordingly to POWER_DOMAIN_AUDIO_MMIO for audio detection and POWER_DOMAIN_AUDIO_PLAYBACK for audio playback. While doing this it requires to use POWER_DOMAIN_AUDIO_MMIO power domain instead of POWER_DOMAIN_AUDIO in crtc power domain mask and POWER_DOMAIN_AUDIO_PLAYBACK with intel_display_power_{get, put} to enable/disable display audio codec power. It will save the power in use cases when DP/HDMI connectors configured with PIPE_A without any audio playback. v1: Changes since RFC - changed power domain names. [Imre] - Removed TC{3,6}, AUX_USBC{3,6} and TBT from DG1 power well and PW_3 power domains. [Imre] - Fixed the order of powe wells , power domains and its registration. [Imre] v2: - Not allowe DC states when AUDIO_MMIO domain enabled. [Imre] v3: - Squashes the commits of series to avoid build failure. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> [Fix typo in commit message and in AUDIO_PLAYBACK domain name] Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210729121858.16897-2-anshuman.gupta@intel.com
2021-05-05drm/i915: Don't include intel_de.h from intel_display_types.hVille Syrjälä1-0/+1
Hoist the intel_de.h include from intel_display_types.h one level up. I need this in order to untangle the include order so that I can add tracepoints into intel_de.h. This little cocci script did most of the work for me: @find@ @@ ( intel_de_read(...) | intel_de_read_fw(...) | intel_de_write(...) | intel_de_write_fw(...) ) @has_include@ @@ ( #include "intel_de.h" | #include "display/intel_de.h" ) @depends on find && !has_include@ @@ + #include "intel_de.h" #include "intel_display_types.h" @depends on find && !has_include@ @@ + #include "display/intel_de.h" #include "display/intel_display_types.h" Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
2021-05-04drm/i915/audio: fix indentation, remove extra bracesJani Nikula1-2/+2
Cleanup the code. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6c2f6afa4c8866f8c1714b4f8dba9ea2d1509e4a.1620115983.git.jani.nikula@intel.com
2021-05-04drm/i915/audio: simplify, don't mask out in all branchesJani Nikula1-15/+8
Lift the masking outside of the if branches. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a87fd5e66b52c4d52a568888e1b8037841786fd2.1620115982.git.jani.nikula@intel.com
2021-04-14drm/i915/display: rename display version macrosLucas De Marchi1-1/+1
While converting the rest of the driver to use GRAPHICS_VER() and MEDIA_VER(), following what was done for display, some discussions went back on what we did for display: 1) Why is the == comparison special that deserves a separate macro instead of just getting the version and comparing directly like is done for >, >=, <=? 2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for brevity. If we remove the current users of IS_DISPLAY_VER(), we could actually repurpose it for a range check With (1) there could be an advantage if we used gen_mask since multiple conditionals be combined by the compiler in a single and instruction and check the result. However a) INTEL_GEN() doesn't use the mask since it would make the code bigger everywhere else and b) in the cases it made sense, it also made sense to convert to the _RANGE() variant. So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER() users to use == and != operators. Aside from the definition changes, this was done by the following semantic patch: @@ expression dev_priv, E1; @@ - !IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) != E1 @@ expression dev_priv, E1; @@ - IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) == E1 @@ expression dev_priv, from, until; @@ - IS_DISPLAY_RANGE(dev_priv, from, until) + IS_DISPLAY_VER(dev_priv, from, until) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> [Jani: Minor conflict resolve while applying.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com
2021-04-14drm/i915/display: use DISPLAY_VER() on remaining usersLucas De Marchi1-1/+1
Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") added INTEL_GEN() in the display code, where it should actually be using DISPLAY_VER(). Switch to the new macro. Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-2-lucas.demarchi@intel.com
2021-03-24drm/i915/audio: set HDA link parameters in driverKai Vehmanen1-5/+25
Update logic to program AUD_FREQ_CNTRL register based on new guidance. Earlier this register was configured by BIOS and driver discovered the value at init. This is no longer recommended and instead driver should set the values based on the hardware revision. Add the recommended values for all supported hardware. This change applies for all GEN12+ hardware. For TGL, some special case handling is needed to not break existing systems. Extend the debug print to also include values of the register as written by BIOS. This can help debug rare cases where BIOS has configured the link settings to incorrect values. Bspec: 49279 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324123725.4170214-1-kai.vehmanen@linux.intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 06:12:49 +0300